Yes I have checked the version it is SNMPv1.

----- Original Message ----- 
From: "Dirk Bulinckx" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, June 08, 2004 4:14 AM
Subject: RE: [SA-list] sending SNMP trap alerts to HP OpenView


> Are you sure to use SNMPv1?
>
> If you look at an SNMPv1 trap it has the following "fields":
> Enterprise (sender OID)
> Agent IP address (sender IP)
>
>
> (the data part is an SNMP sequence):
> OID
> Value
>
>
> In SNMPv2 you will NOT see the enterprise and agentIP.
>
>
>
>
> Dirk.
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf
> Of Dirk Bulinckx
> Sent: Monday, June 07, 2004 7:41 PM
> To: [EMAIL PROTECTED]
> Subject: RE: [SA-list] sending SNMP trap alerts to HP OpenView
>
> So must I understand from this that HPOV is not looking at the objectID
but
> at the OID of the sender instead?
> That doesn't sound right to me.  The sender OID is an OID that just has to
> show who is sending not what is exactly send.
>
>
> Dirk.
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf
> Of iPrimus NMC
> Sent: Monday, June 07, 2004 6:49 PM
> To: [EMAIL PROTECTED]
> Subject: Re: [SA-list] sending SNMP trap alerts to HP OpenView
>
> Dirk,
>
> The down event Object ID is set to 1.3.6.1.4.1.10984.0.1 with object value
> %p is %s [%e] and the Up event Object ID to 1.3.6.1.4.1.10984.0.2 with
> object value %p is %s.  Both alarms produce a Major alarm and HPOV
indicates
> that the "specific trap" value is 0 in both cases.
>
> Steve
>
> ----- Original Message ----- 
> From: "Dirk Bulinckx" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Tuesday, June 08, 2004 2:20 AM
> Subject: RE: [SA-list] sending SNMP trap alerts to HP OpenView
>
>
> > The sender OID is just an indication on what system is sending the trap
> > (together with the IP of the sender), the actual info should be done
with
> > the "object OID" and "object value" which are set within the alert
> > definition.
> >
> >
> > Dirk.
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
> Behalf
> > Of iPrimus NMC
> > Sent: Monday, June 07, 2004 5:59 PM
> > To: [EMAIL PROTECTED]
> > Subject: [SA-list] sending SNMP trap alerts to HP OpenView
> >
> > Hello,
> >
> > I have setup SA to send SNMP traps to our HPOV central monitoring
system.
> > The Sender OID is 1.3.6.1.4.1.10984 as per the SA manual using SNMPv1.
> >
> > SA successfully sends alert traps for down and up events that however
> > produce the same alarm severity (Major) at the HPOV alarm browser.  We
> > require SA down events to generate HPOV Major alarms and up events to
> > generate Normal alarms.
> >
> > HPOV is using event identifier .1.3.6.1.4.1.10984.0.1 for down events
and
> > 1.3.6.1.4.1.10984.0.2 for up/normal events.
> >
> > How do I need to setup SA/HPOV for this to work as required.
> >
> >
> > Regards
> > Steve Wright
> > Primus Telecomunications
> >
> > ---
> >
> > [This E-mail scanned for viruses by Declude Virus]
> >
> > To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
> > With the following in the body of the message:
> >    unsubscribe SAlive
> >
> >
> >
> > ---
> >
> > [This E-mail scanned for viruses by Declude Virus]
> >
> > To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
> > With the following in the body of the message:
> >    unsubscribe SAlive
> >
>
>
> --------------
>
> [This E-mail scanned for viruses by Declude Virus]
>
> To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
> With the following in the body of the message:
>    unsubscribe SAlive
>
>
>
>
> --------------
>
> [This E-mail scanned for viruses by Declude Virus]
>
> To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
> With the following in the body of the message:
>    unsubscribe SAlive
>
>
>
>
> --------------
>
> [This E-mail scanned for viruses by Declude Virus]
>
> To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
> With the following in the body of the message:
>    unsubscribe SAlive
>


--------------

[This E-mail scanned for viruses by Declude Virus]

To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
With the following in the body of the message:
   unsubscribe SAlive

Reply via email to