RE: [SA-list] Server's Alive slowness

[Dirk Bulinckx]

The mentioned setting will only reduce the "wait" (in milliseconds) between 2 checks (within the same cycle). The default is 250ms, the lowest you can go is 10ms. Restarting SA after making the change is needed.   And it should give a difference.   A simple calculation shows that on a 100 entries list it should give a     (100 * 250) - (100 * 10) = 25000 - 1000 = 24000 24000ms or 24s difference in cycle time.         Dirk.   From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Clough, Bruce Sent: Tuesday, December 06, 2005 10:06 PM To: salive@woodstone.nu Subject: RE: [SA-list] Server's Alive slowness The system is running Windows 2003 server with dual 2.4 GHz Xeon processors and 1 GB of RAM.   --Bruce   From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kevin Stone Sent: Tuesday, December 06, 2005 12:47 PM To: salive@woodstone.nu Subject: RE: [SA-list] Server's Alive slowness   Which version are you running(5.x.xxxx), how many checks, and what are the server specs(CPU and RAM).  That setting has been the most dramatic decrease in cycle times for my installations.    -Kevin   From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Clough, Bruce Sent: Tuesday, December 06, 2005 12:54 PM To: salive@woodstone.nu Subject: [SA-list] Server's Alive slowness I recently migrated Server’s Alive to a newer faster server with more memory and upgraded from version 4 to version 5. However, it is taking significantly more time to complete the check cycle that it did on the old system.   I changed the registry value HKEY_LOCAL_MACHINE\SOFTWARE\DBU Consulting\Servers Alive\StartUp\PerItemCycle from 250 to 10 and rebooted the server, but there has been no effect on the length of the check cycle.   Is there something else that needs to be set to increase performance?   Bruce Clough Bechtel Nevada