Try to start by limiting the scope by just setting the enterprise OID Dirk Bulinckx Servers Alive - http://www.woodstone.nu (http://www.woodstone.nu/) StellarDNS (DNS Hosting) - http://www.stellardns.com (http://www.stellardns.com/)
-------------------------------------------------------------------------------- From: Servers Alive Discussion List [mailto:[email protected]] On Behalf Of Anthony Laatz Sent: Tuesday, June 19, 2012 12:46 AM To: Servers Alive Discussion List Subject: RE: [SA-list] Trap Receiver Well the document did not have an example of what I was looking for. The OID is where I am having the issue. I entered the Enterprise OID, and set the types to * as suggested. But the 4 rows for different OID entries, this is where I don’t know if I have it right. For example for an APC unit. Name: Cincinnati APC 1 AgentIP: 1.2.3.4 SoureIP: 1.2.3.4 Enterprise OID: .1.3.6.1.4.1.318 Community: public Generic Type: * Specific Type: * OID: .1.3.6.1.4.1.318.0.5 [checked] (contains) “switched to battery” ^^ I don’t know if the above is right.. I am trying to send test SNMP and the viewer see’s this.. which I also mimicked to try and generate an alert, still nothing. Counter: 0 Sender: 1.2.3.4 Agent: 1.2.3.4 EnterpriseOID: 1.3.6.1.4.1.318 Date/time: 6/18/2012@16:47 OID: 1.3.6.1.2.1.1.3.0 Type: 67 Value: 225336350 OID: 1.3.6.1.6.3.1.1.4.1.0 Type: 6 Value: 1.3.6.1.4.1.318.0.636 Thank you, anthony Laatz | appletree Answers p: 800.270.7030 f: 866.827.8802 e: [email protected] (mailto:[email protected]) From: Anthony Laatz [mailto:[email protected]] Sent: Monday, June 18, 2012 4:31 PM To: Servers Alive Discussion List Subject: RE: [SA-list] Trap Receiver Thanks! I don’t know why I couldn’t find this page. K From: Dirk Bulinckx [mailto:[email protected]] (mailto:[mailto:[email protected]]) Sent: Monday, June 18, 2012 4:17 PM To: Servers Alive Discussion List Subject: RE: [SA-list] Trap Receiver Latest doc is on http://www.woodstone.nu/salive/documentation.php (http://www.woodstone.nu/salive/documentation.php) Dirk Bulinckx Servers Alive - http://www.woodstone.nu (http://www.woodstone.nu/) StellarDNS (DNS Hosting) - http://www.stellardns.com (http://www.stellardns.com/) -------------------------------------------------------------------------------- From: Servers Alive Discussion List [mailto:[email protected]] (mailto:[mailto:[email protected]]) On Behalf Of Anthony Laatz Sent: Monday, June 18, 2012 11:01 PM To: Servers Alive Discussion List Subject: [SA-list] Trap Receiver So I finally understand the wonderful world of SNMP, MIBs and OIDs!! I am looking for the SA general user manual, but I cannot seem to locate it anymore on the website. I know the last revision was still for 6, but I am looking on how to setup the Trap Receiver Alerts. I’ve setup a couple, and when I send a test trap from the device I get nothing, no email alert. Anyone have that document? Thank you, anthony Laatz | appletree Answers p: 800.270.7030 f: 866.827.8802 e: [email protected] (mailto:[email protected]) To unsubscribe send a message with UNSUBSCRIBE in the subject line to [email protected] (mailto:[email protected]) If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. To unsubscribe send a message with UNSUBSCRIBE in the subject line to [email protected] (mailto:[email protected]) If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. To unsubscribe send a message with UNSUBSCRIBE in the subject line to [email protected] (mailto:[email protected]) If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. To unsubscribe send a message with UNSUBSCRIBE in the subject line to [email protected] If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. To unsubscribe send a message with UNSUBSCRIBE in the subject line to [email protected] If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list.
