On 06/10/2013 03:47 AM, steve wrote: > On 09/06/13 20:16, Gerry Reno wrote: >> On 06/09/2013 06:45 AM, steve wrote: >>> On 09/06/13 11:00, Adam Sienkiewicz wrote: >>>> Hi Steve >>>> >>>> I procceeded regarding this howtu. All seems to be fine except >>>> connection samba-cups. From windows I can add printer, print test page >>>> but all print jobs from samba are lost between samba and cups I think. >>>> There is no entries in cups logs only issue in samba logs >>> Hi >>> I just found my eror. i hope it's the same for you: >>> >>> Here is my smb.conf: >>> >>> [printers] >>> path = /var/spool/samba >>> printable = yes >>> printing = CUPS >>> >>> [print$] >>> path = /srv/samba/Printer_drivers >>> comment = Printer Drivers >>> writeable = yes >>> >>> [hpdeskjetf2200series] >>> path = /var/spool/samba/ >>> browseable = yes >>> printable = yes >>> printer name = hpdeskjetf2200series >>> #printer name = "HP Deskjet F2200 series" >>> >>> Note the printer name lines. I had the windows name "HP Deskjet F2200 >>> series" >>> >>> The clue was in the logs: >>> /usr/local/samba/sbin/smbd: Unable to get jobs for >>> ipp://localhost/printers/HP Deskjet F2200 series - >>> client-error-not-found >>> >>> I changed to the Linux/cups printer name and print jobs got sent without >>> error. >>> HTH >>> Steve >>> >>> >> Steve, still not working for me. >> >> What is the output of lpinfo -v on your system? >> >> Gerry >> >> >> >> > Hi Gerry > lpinfo -v > network http > network ipp > network ipps > network https > direct usb://HP/Deskjet%20F2200%20series?serial=CN8BO1S0S605CC > network socket > network lpd > direct hp:/usb/Deskjet_F2200_series?serial=CN8BO1S0S605CC > network smb > direct parallel:/dev/lp0 > network beh > direct hpfax > > I wonder if you have the cups dev libraries and headers installed before you > compile. I didn't so that was another > problem I had. On openSUSE it's cups-devel. Just to make sure, I built with > ./configure --enable-cups > > Suerte, > Steve >
Ok, here's lpinfo -v on my test system: # lpinfo -v network ipp network lpd file cups-pdf:/ network socket direct scsi network https network http network socket://192.168.2.180 The last entry is a networked printer I notice that "network smb" is missing. Going to CH10 in the Samba manual I see that it takes a symlink from smbspool. Did you have to do that manually? Or did it just get made during install? Gerry -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
