On 06/10/2013 12:16 PM, steve wrote: > On Mon, 2013-06-10 at 09:54 -0400, Gerry Reno wrote: >> On 06/10/2013 03:47 AM, steve wrote: >>> On 09/06/13 20:16, Gerry Reno wrote: >>>> On 06/09/2013 06:45 AM, steve wrote: >>>>> On 09/06/13 11:00, Adam Sienkiewicz wrote: >>>>>> Hi Steve >>>>>> >>>>>> I procceeded regarding this howtu. All seems to be fine except >>>>>> connection samba-cups. From windows I can add printer, print test page >>>>>> but all print jobs from samba are lost between samba and cups I think. >>>>>> There is no entries in cups logs only issue in samba logs >>>>> Hi >>>>> I just found my eror. i hope it's the same for you: >>>>> >>>>> Here is my smb.conf: >>>>> >>>>> [printers] >>>>> path = /var/spool/samba >>>>> printable = yes >>>>> printing = CUPS >>>>> >>>>> [print$] >>>>> path = /srv/samba/Printer_drivers >>>>> comment = Printer Drivers >>>>> writeable = yes >>>>> >>>>> [hpdeskjetf2200series] >>>>> path = /var/spool/samba/ >>>>> browseable = yes >>>>> printable = yes >>>>> printer name = hpdeskjetf2200series >>>>> #printer name = "HP Deskjet F2200 series" >>>>> >>>>> Note the printer name lines. I had the windows name "HP Deskjet F2200 >>>>> series" >>>>> >>>>> The clue was in the logs: >>>>> /usr/local/samba/sbin/smbd: Unable to get jobs for >>>>> ipp://localhost/printers/HP Deskjet F2200 series - >>>>> client-error-not-found >>>>> >>>>> I changed to the Linux/cups printer name and print jobs got sent without >>>>> error. >>>>> HTH >>>>> Steve >>>>> >>>>> >>>> Steve, still not working for me. >>>> >>>> What is the output of lpinfo -v on your system? >>>> >>>> Gerry >>>> >>>> >>>> >>>> >>> Hi Gerry >>> lpinfo -v >>> network http >>> network ipp >>> network ipps >>> network https >>> direct usb://HP/Deskjet%20F2200%20series?serial=CN8BO1S0S605CC >>> network socket >>> network lpd >>> direct hp:/usb/Deskjet_F2200_series?serial=CN8BO1S0S605CC >>> network smb >>> direct parallel:/dev/lp0 >>> network beh >>> direct hpfax >>> >>> I wonder if you have the cups dev libraries and headers installed before >>> you compile. I didn't so that was another >>> problem I had. On openSUSE it's cups-devel. Just to make sure, I built with >>> ./configure --enable-cups >>> >>> Suerte, >>> Steve >>> >> >> Ok, here's lpinfo -v on my test system: >> # lpinfo -v >> network ipp >> network lpd >> file cups-pdf:/ >> network socket >> direct scsi >> network https >> network http >> network socket://192.168.2.180 >> >> The last entry is a networked printer >> >> I notice that "network smb" is missing. Going to CH10 in the Samba manual I >> see that it takes a symlink from smbspool. >> Did you have to do that manually? Or did it just get made during install? >> >> Gerry > Hi > No idea about the symlink until you mentioned it so it must have been > made during the install. > >
I don't understand then why my Samba git stable (4.0.6) install doesn't have this symlink. $ find . -name config.h ./source4/heimdal_build/config.h ./bin/default/include/config.h Is there some configure switch that causes this to be generated? Gerry -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
