On Mon, 2013-06-10 at 09:54 -0400, Gerry Reno wrote: > On 06/10/2013 03:47 AM, steve wrote: > > On 09/06/13 20:16, Gerry Reno wrote: > >> On 06/09/2013 06:45 AM, steve wrote: > >>> On 09/06/13 11:00, Adam Sienkiewicz wrote: > >>>> Hi Steve > >>>> > >>>> I procceeded regarding this howtu. All seems to be fine except > >>>> connection samba-cups. From windows I can add printer, print test page > >>>> but all print jobs from samba are lost between samba and cups I think. > >>>> There is no entries in cups logs only issue in samba logs > >>> Hi > >>> I just found my eror. i hope it's the same for you: > >>> > >>> Here is my smb.conf: > >>> > >>> [printers] > >>> path = /var/spool/samba > >>> printable = yes > >>> printing = CUPS > >>> > >>> [print$] > >>> path = /srv/samba/Printer_drivers > >>> comment = Printer Drivers > >>> writeable = yes > >>> > >>> [hpdeskjetf2200series] > >>> path = /var/spool/samba/ > >>> browseable = yes > >>> printable = yes > >>> printer name = hpdeskjetf2200series > >>> #printer name = "HP Deskjet F2200 series" > >>> > >>> Note the printer name lines. I had the windows name "HP Deskjet F2200 > >>> series" > >>> > >>> The clue was in the logs: > >>> /usr/local/samba/sbin/smbd: Unable to get jobs for > >>> ipp://localhost/printers/HP Deskjet F2200 series - > >>> client-error-not-found > >>> > >>> I changed to the Linux/cups printer name and print jobs got sent without > >>> error. > >>> HTH > >>> Steve > >>> > >>> > >> Steve, still not working for me. > >> > >> What is the output of lpinfo -v on your system? > >> > >> Gerry > >> > >> > >> > >> > > Hi Gerry > > lpinfo -v > > network http > > network ipp > > network ipps > > network https > > direct usb://HP/Deskjet%20F2200%20series?serial=CN8BO1S0S605CC > > network socket > > network lpd > > direct hp:/usb/Deskjet_F2200_series?serial=CN8BO1S0S605CC > > network smb > > direct parallel:/dev/lp0 > > network beh > > direct hpfax > > > > I wonder if you have the cups dev libraries and headers installed before > > you compile. I didn't so that was another > > problem I had. On openSUSE it's cups-devel. Just to make sure, I built with > > ./configure --enable-cups > > > > Suerte, > > Steve > > > > > Ok, here's lpinfo -v on my test system: > # lpinfo -v > network ipp > network lpd > file cups-pdf:/ > network socket > direct scsi > network https > network http > network socket://192.168.2.180 > > The last entry is a networked printer > > I notice that "network smb" is missing. Going to CH10 in the Samba manual I > see that it takes a symlink from smbspool. > Did you have to do that manually? Or did it just get made during install? > > Gerry Hi No idea about the symlink until you mentioned it so it must have been made during the install.
-- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
