On Thu, 21 May 2020 at 16:25, Ralph Little <skelb...@gmail.com> wrote:
> > Which option are you using in simple-scan? There are a few: > > "Single page" > "All pages from feeder" > "Multiple pages from flatbed" > > If you choose the 3rd option, then you will experience this. > If you chose the 2nd, then perhaps we have an issue that can be > investigated. > > Could you also let us know the output of: > > scanimage -A > > Cheers, > Ralph > I used first "All pages from feeder", and then "Multiple pages from flatbed". In both cases the scanner behaved similarly. >From what you said that would mean that "Multiple pages from flatbed" is working, but "All pages from feeder" is not. The output of scanimage: $ scanimage -A -d https://<device_ip>:443 Output format is not set, using pnm as a default. Capability : [image/jpeg] Capability : [image/jpeg] Capability : [image/jpeg] Capability : [image/jpeg] All options specific to device `escl:https://<device_ip>:443': Scan mode: --mode Gray|Color [Gray] Selects the scan mode (e.g., lineart, monochrome, or color). --resolution 75|100|150|200|300|600|1200dpi [75] Sets the resolution of the scanned image. --preview[=(yes|no)] [no] Request a preview-quality scan. --preview-in-gray[=(yes|no)] [no] Request that all previews are done in monochrome mode. On a three-pass scanner this cuts down the number of passes to one and on a one-pass scanner, it reduces the memory requirements and scan-time of the preview. Geometry: -l 0..0.0388947pel (in steps of 1.52588e-05) [0] Top-left x position of scan area. -t 0..0.0535126pel (in steps of 1.52588e-05) [0] Top-left y position of scan area. -x 0..0.0388947pel (in steps of 1.52588e-05) [0.0389099] Width of scan-area. -y 0..0.0535126pel (in steps of 1.52588e-05) [0.0535278] Height of scan-area. Regards Benjamin