Hi, On Thu, May 21, 2020 at 10:07 AM Benjamin TERRIER <[email protected]> wrote:
> > > On Thu, 21 May 2020 at 16:25, Ralph Little <[email protected]> wrote: > >> >> Could you also let us know the output of: >> >> scanimage -A >> >> I used first "All pages from feeder", and then "Multiple pages from > flatbed". > In both cases the scanner behaved similarly. > > From what you said that would mean that "Multiple pages from flatbed" is > working, but "All pages from feeder" is not. > > The output of scanimage: > > $ scanimage -A -d https://<device_ip>:443 > Output format is not set, using pnm as a default. > Capability : [image/jpeg] > Capability : [image/jpeg] > Capability : [image/jpeg] > Capability : [image/jpeg] > > All options specific to device `escl:https://<device_ip>:443': > Scan mode: > --mode Gray|Color [Gray] > Selects the scan mode (e.g., lineart, monochrome, or color). > --resolution 75|100|150|200|300|600|1200dpi [75] > Sets the resolution of the scanned image. > --preview[=(yes|no)] [no] > Request a preview-quality scan. > --preview-in-gray[=(yes|no)] [no] > Request that all previews are done in monochrome mode. On a > three-pass scanner this cuts down the number of passes to one and > on a > one-pass scanner, it reduces the memory requirements and scan-time > of > the preview. > Geometry: > -l 0..0.0388947pel (in steps of 1.52588e-05) [0] > Top-left x position of scan area. > -t 0..0.0535126pel (in steps of 1.52588e-05) [0] > Top-left y position of scan area. > -x 0..0.0388947pel (in steps of 1.52588e-05) [0.0389099] > Width of scan-area. > -y 0..0.0535126pel (in steps of 1.52588e-05) [0.0535278] > Height of scan-area. > > > OK, well that appears to be the problem. You are using the escl backend, and it is not reporting the existence of a source option. We would normally expect to see a source option with some variant of "Flatbed" and "ADF" or "Automatic Document Feeder". I wonder if Thierry would have some input here? Cheers, Ralph
