Does the device file /dev/usb/scanner0 have the correct permissions? Can you read _AND_ write to it? If the permissions are OK, please do the following in a shell:
export SANE_DEBUG_EPSON=128 xsane > /tmp/scan.log 2>&1 Please attach this log file to your reply. Karl Heinz On Dec 14, 2003, at 11:11 AM, [email protected] wrote: > Just got my Epson Perfection 2400 scanner. Attached it to my RH9 box. > Installed the latest sane-backends tarball. > > Here is what I see: > > sane-find-scanner > > does find the scanner > > But scanimage -L doesnt find it. > > cat /proc/bus/usb/devices does show my scanner. > > lsmod also shows the scanner module loaded. Just to be sure I did a > rmmod scanner > modprobe scanner vendor=0x.. product=0x... > > No problem here. > > I uncommented the > usb /dev/usb/scanner0 > line in /etc/sane.d/epson.conf > > /etc/sane.d/dll.conf does have the epson line uncommented > > If I do a scanimage -d epson:/dev/usb/scanner0 it says 'Cannot open > device'. > > Still no luck. What am I missing? Perfection 2400 does seem to be > supported by the sane-epson backend. > > Help? > > Thanks > > _______________________________________________________ > The FREE service that prevents junk email http://www.mailshell.com > > -- > sane-devel mailing list: [email protected] > http://lists.alioth.debian.org/mailman/listinfo/sane-devel > Unsubscribe: Send mail with subject "unsubscribe your_password" > to [email protected]
