>From Henning Meier-Geinitz <[email protected]> on 10 Dec 2003:
> Please show us the output of > SANE_DEBUG_EPSON=255 scanimage -L > > If there is no output but the "no device found" messages, have a look > at the archive of sane-devel. I've written about a similar case some > minutes ago. [vikas@upstairs sane-backends-1.0.13]$ SANE_DEBUG_EPSON=255 scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). [vikas@upstairs sane-backends-1.0.13]$ sane-find-scanner # No SCSI scanners found. If you expected something different, make sure that # you have loaded a SCSI driver for your SCSI adapter. found USB scanner (vendor=0x04b8, product=0x011b) at /dev/usb/scanner0 found USB scanner (vendor=0x04b8, product=0x011b) at libusb:001:002 # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Scanners connected to the parallel port or other proprietary ports can't be # detected by this program. # You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary. ls -l /dev/usb/scanner0 [vikas@upstairs sane-backends-1.0.13]$ ls -l /dev/usb/scanner0 crw-rw-rw- 1 root root 180, 48 Jan 30 2003 /dev/usb/scanner0 As root, /sbin/lsusb gives me Bus 001 Device 002: ID 04b8:011b Seiko Epson Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64 idVendor 0x04b8 Seiko Epson Corp. idProduct 0x011b bcdDevice 1.00 iManufacturer 1 EPSON iProduct 2 EPSON Scanner iSerial 0 bNumConfigurations 1 cat /proc/bus/usb/devices gives me T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 P: Vendor=04b8 ProdID=011b Rev= 1.00 S: Manufacturer=EPSON S: Product=EPSON Scanner C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbscanner E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I searched the archives, didnt find anything relevant. Please repost? Thanks _______________________________________________________ The FREE service that prevents junk email http://www.mailshell.com
