Excellent. set_window is now accepted by the scanner, but it does not like our ssm_do() call. So, edit canon_dr.c around line 3273, and comment out the call to ssm_do(). Then try again with test2 :)
allan On Mon, Jan 3, 2011 at 11:19 AM, Christophe Largeau (liste) <liste at alixen.fr> wrote: > Hi, > > change, recompile and test done. > > The test1pnm file is empty. > > The compressed test1.log ?is attached to this message. > > Christophe. > > Le 03/01/2011 16:50, m. allan noah a ?crit : >> >> ok- can you make some changes, recompile, and test? >> >> canon_dr.c in function set_window, around line 3615 comment out these >> lines: >> >> set_WD_brightness (desc1, s->brightness+128); >> set_WD_threshold (desc1, s->threshold); >> set_WD_contrast (desc1, s->contrast+128); >> >> Then compile, copy the library, and scan again, using this command: >> >> SANE_DEBUG_CANON_DR=30 scanimage --resolution 200 --mode Gray >>> >>> test1pnm 2>test1.log >> >> Hopefully test1.pnm will contain an image. If not, compress the log >> and send it to me. >> >> allan >> >> On Mon, Jan 3, 2011 at 10:11 AM, m. allan noah<kitno455 at gmail.com> ?wrote: >>> >>> Yes- I can see some set window data in it, though I am not sure it is >>> complete. This sniffer program seems to miss some of the data. I will >>> look some more today. >>> >>> allan >>> >>> On Mon, Jan 3, 2011 at 8:06 AM, Christophe Largeau (liste) >>> <liste at alixen.fr> ?wrote: >>>> >>>> Hi, >>>> >>>> have you checked the log ? Is it helpful ? >>>> >>>> Christophe. >>>> >>>> Le 29/12/2010 17:04, Christophe Largeau (liste) a ?crit : >>>>> >>>>> Thank you. >>>>> >>>>> Note that I'll be away until next monday. >>>>> >>>>> Christophe. >>>>> >>>>> Le 29/12/2010 17:00, m. allan noah a ?crit : >>>>>> >>>>>> Thanks. I'll look at it tonight. >>>>>> >>>>>> allan >>>>>> >>>>>> On Wed, Dec 29, 2010 at 10:07 AM, Christophe Largeau (liste) >>>>>> <liste at alixen.fr> ?wrote: >>>>>>> >>>>>>> the trace.wsl file taken from the snifer is attached to this message. >>>>>>> >>>>>>> Christophe. >>>>>>> >>>>>>> >>>>>>> Le 29/12/2010 15:38, m. allan noah a ?crit : >>>>>>>> >>>>>>>> the sniffer utility: >>>>>>>> >>>>>>>> >>>>>>>> ftp://ftp.compuware.com/pub/driverstudio/outgoing/utility/wdmsniffer.zip >>>>>>>> >>>>>>>> >>>>>>>> We need to use that to capture traffic of a low-resolution black and >>>>>>>> white >>>>>>>> scan. >>>>>>>> >>>>>>>> I cannot give more specific instructions, because I rarely use this >>>>>>>> program. >>>>>>>> >>>>>>>> allan >>>>>>>> >>>>>>>> On Wed, Dec 29, 2010 at 9:29 AM, Christophe Largeau (liste) >>>>>>>> <liste at alixen.fr> ?wrote: >>>>>>>>> >>>>>>>>> I will replug the scsi card into the orignal windows machine. Do >>>>>>>>> you have >>>>>>>>> instruction for the log capture on windows ? >>>>>>>>> >>>>>>>>> Christophe. >>>>>>>>> >>>>>>>>> Le 29/12/2010 15:22, m. allan noah a ?crit : >>>>>>>>>> >>>>>>>>>> hmm- it is mad about something we ask it to do in the set window >>>>>>>>>> command. I don't have a protocol manual for this machine, so we >>>>>>>>>> have >>>>>>>>>> to guess what the problem is. Or, we have to try and capture a log >>>>>>>>>> from Windows driver. Can you use this machine on windows? >>>>>>>>>> >>>>>>>>>> allan >>>>>>>>>> >>>>>>>>>> On Wed, Dec 29, 2010 at 8:55 AM, Christophe Largeau (liste) >>>>>>>>>> <liste at alixen.fr> ?wrote: >>>>>>>>>>> >>>>>>>>>>> the new dr.log is attached to this message. >>>>>>>>>>> >>>>>>>>>>> Christophe. >>>>>>>>>>> >>>>>>>>>>> Le 29/12/2010 14:46, m. allan noah a ?crit : >>>>>>>>>>>> >>>>>>>>>>>> Sorry, hit 'send' too soon- you should try: >>>>>>>>>>>> >>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d canon_dr:/dev/sg2 >>>>>>>>>>>> 2>dr.log>dr.pnm >>>>>>>>>>>> >>>>>>>>>>>> allan >>>>>>>>>>>> >>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:35 AM, m. allan >>>>>>>>>>>> noah<kitno455 at gmail.com> >>>>>>>>>>>> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> "scanimage: output is not a file, exiting" >>>>>>>>>>>>> >>>>>>>>>>>>> allan >>>>>>>>>>>>> >>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:23 AM, Christophe Largeau (liste) >>>>>>>>>>>>> <liste at alixen.fr> ?wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>> Hi, >>>>>>>>>>>>>> >>>>>>>>>>>>>> I'm testing Canon DR-5060-F (SCSI) under Ubuntu 10.10 >>>>>>>>>>>>>> >>>>>>>>>>>>>> ii libsane 1.0.21-2ubuntu2 >>>>>>>>>>>>>> API >>>>>>>>>>>>>> library for scanners >>>>>>>>>>>>>> ii sane-utils 1.0.21-2ubuntu2 >>>>>>>>>>>>>> API >>>>>>>>>>>>>> library for scanners -- utilities >>>>>>>>>>>>>> >>>>>>>>>>>>>> The sane-find-scanner commands returns : >>>>>>>>>>>>>> # sane-find-scanner will now attempt to detect your scanner. >>>>>>>>>>>>>> If the >>>>>>>>>>>>>> # result is different from what you expected, first make sure >>>>>>>>>>>>>> your >>>>>>>>>>>>>> # scanner is powered up and properly connected to your >>>>>>>>>>>>>> computer. >>>>>>>>>>>>>> >>>>>>>>>>>>>> found SCSI scanner "CANON DR-5060F 0110" at /dev/sg2 >>>>>>>>>>>>>> # Your SCSI scanner was detected. It may or may not be >>>>>>>>>>>>>> supported by >>>>>>>>>>>>>> SANE. >>>>>>>>>>>>>> Try >>>>>>>>>>>>>> # scanimage -L and read the backend's manpage. >>>>>>>>>>>>>> >>>>>>>>>>>>>> # No USB scanners found. If you expected something different, >>>>>>>>>>>>>> make >>>>>>>>>>>>>> sure >>>>>>>>>>>>>> that >>>>>>>>>>>>>> # you have loaded a kernel driver for your USB host controller >>>>>>>>>>>>>> and >>>>>>>>>>>>>> have >>>>>>>>>>>>>> setup >>>>>>>>>>>>>> # the USB system correctly. See man sane-usb for details. >>>>>>>>>>>>>> >>>>>>>>>>>>>> # Not checking for parallel port scanners. >>>>>>>>>>>>>> >>>>>>>>>>>>>> # Most Scanners connected to the parallel port or other >>>>>>>>>>>>>> proprietary >>>>>>>>>>>>>> ports >>>>>>>>>>>>>> # can't be detected by this program. >>>>>>>>>>>>>> >>>>>>>>>>>>>> when I tried the command "scanimage -L" the scanner wasn't >>>>>>>>>>>>>> recognized >>>>>>>>>>>>>> >>>>>>>>>>>>>> thanks to this message : >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> http://lists.alioth.debian.org/pipermail/sane-devel/2010-March/026220.html >>>>>>>>>>>>>> , >>>>>>>>>>>>>> I've added the following lines to canon_dr.c at line 1203. >>>>>>>>>>>>>> >>>>>>>>>>>>>> else if (strstr (s->model_name,"DR-5060F")){ >>>>>>>>>>>>>> s->can_write_panel = 0; >>>>>>>>>>>>>> } >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Then I replace the compiled versions of libsane-canon_dr.la >>>>>>>>>>>>>> and >>>>>>>>>>>>>> libsane-canon_dr.so.1.0.21 in /usr/lib/sane >>>>>>>>>>>>>> >>>>>>>>>>>>>> Now, the "scanimage -L" command returns : >>>>>>>>>>>>>> device `canon_dr:/dev/sg2' is a CANON DR-5060F scanner >>>>>>>>>>>>>> >>>>>>>>>>>>>> Great, but the scanner doesn't work : >>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d canon_dr:/dev/sg2 >>>>>>>>>>>>>> [sanei_debug] Setting debug level of canon_dr to 30. >>>>>>>>>>>>>> [canon_dr] sane_init: start >>>>>>>>>>>>>> [canon_dr] sane_init: canon_dr backend 1.0.35, from >>>>>>>>>>>>>> sane-backends >>>>>>>>>>>>>> 1.0.21 >>>>>>>>>>>>>> [canon_dr] sane_init: finish >>>>>>>>>>>>>> [canon_dr] sane_open: start >>>>>>>>>>>>>> [canon_dr] sane_open: no scanners currently attached, >>>>>>>>>>>>>> attaching >>>>>>>>>>>>>> [canon_dr] sane_get_devices: start >>>>>>>>>>>>>> [canon_dr] sane_get_devices: reading config file canon_dr.conf >>>>>>>>>>>>>> [canon_dr] sane_get_devices: looking for 'scsi CANON DR' >>>>>>>>>>>>>> [canon_dr] attach_one: start >>>>>>>>>>>>>> [canon_dr] attach_one: looking for '/dev/sg2' >>>>>>>>>>>>>> [canon_dr] connect_fd: start >>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device >>>>>>>>>>>>>> [canon_dr] connect_fd: cannot get requested buffer size >>>>>>>>>>>>>> (2097152/524288) >>>>>>>>>>>>>> [canon_dr] wait_scanner: start >>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start >>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes >>>>>>>>>>>>>> [canon_dr] cmd:>> >>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00 >>>>>>>>>>>>>> ...... >>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish >>>>>>>>>>>>>> [canon_dr] wait_scanner: finish >>>>>>>>>>>>>> [canon_dr] connect_fd: finish >>>>>>>>>>>>>> [canon_dr] init_inquire: start >>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start >>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes >>>>>>>>>>>>>> [canon_dr] cmd:>> >>>>>>>>>>>>>> [canon_dr] 000: 12 00 00 00 30 00 >>>>>>>>>>>>>> ....0. >>>>>>>>>>>>>> [canon_dr] in: reading 48 bytes >>>>>>>>>>>>>> [canon_dr] in:<< >>>>>>>>>>>>>> [canon_dr] 000: 06 00 02 02 1f 00 00 10 43 41 4e 4f 4e 20 20 >>>>>>>>>>>>>> 20 >>>>>>>>>>>>>> ........CANON >>>>>>>>>>>>>> [canon_dr] 010: 44 52 2d 35 30 36 30 46 20 20 20 20 20 20 20 >>>>>>>>>>>>>> 20 >>>>>>>>>>>>>> DR-5060F >>>>>>>>>>>>>> [canon_dr] 020: 30 31 31 30 32 30 30 31 30 36 30 37 20 20 20 >>>>>>>>>>>>>> 20 >>>>>>>>>>>>>> 011020010607 >>>>>>>>>>>>>> [canon_dr] in: read 48 bytes >>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish >>>>>>>>>>>>>> [canon_dr] init_inquire: Found CANON scanner DR-5060F version >>>>>>>>>>>>>> 0110 >>>>>>>>>>>>>> at >>>>>>>>>>>>>> /dev/sg2 >>>>>>>>>>>>>> [canon_dr] init_inquire: finish >>>>>>>>>>>>>> [canon_dr] init_vpd: start >>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start >>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes >>>>>>>>>>>>>> [canon_dr] cmd:>> >>>>>>>>>>>>>> [canon_dr] 000: 12 01 f0 00 1e 00 >>>>>>>>>>>>>> ...... >>>>>>>>>>>>>> [canon_dr] in: reading 30 bytes >>>>>>>>>>>>>> [canon_dr] in:<< >>>>>>>>>>>>>> [canon_dr] 000: 06 f0 02 00 23 01 2c 01 2c a5 01 2c 01 2c 00 >>>>>>>>>>>>>> c8 >>>>>>>>>>>>>> ....#.,.,..,.,.. >>>>>>>>>>>>>> [canon_dr] 010: 00 64 01 c0 00 00 0d a0 00 00 13 ee 0e 00 >>>>>>>>>>>>>> .d............ >>>>>>>>>>>>>> [canon_dr] in: read 30 bytes >>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish >>>>>>>>>>>>>> [canon_dr] init_vpd: length=23 >>>>>>>>>>>>>> [canon_dr] standard options >>>>>>>>>>>>>> [canon_dr] basic x res: 300 dpi >>>>>>>>>>>>>> [canon_dr] basic y res: 300 dpi >>>>>>>>>>>>>> [canon_dr] step x res: 1 dpi >>>>>>>>>>>>>> [canon_dr] step y res: 0 dpi >>>>>>>>>>>>>> [canon_dr] max x res: 300 dpi >>>>>>>>>>>>>> [canon_dr] max y res: 300 dpi >>>>>>>>>>>>>> [canon_dr] min x res: 200 dpi >>>>>>>>>>>>>> [canon_dr] min y res: 100 dpi >>>>>>>>>>>>>> [canon_dr] 60 dpi: 0 >>>>>>>>>>>>>> [canon_dr] 75 dpi: 0 >>>>>>>>>>>>>> [canon_dr] 100 dpi: 0 >>>>>>>>>>>>>> [canon_dr] 120 dpi: 0 >>>>>>>>>>>>>> [canon_dr] 150 dpi: 0 >>>>>>>>>>>>>> [canon_dr] 160 dpi: 0 >>>>>>>>>>>>>> [canon_dr] 180 dpi: 0 >>>>>>>>>>>>>> [canon_dr] 200 dpi: 1 >>>>>>>>>>>>>> [canon_dr] 240 dpi: 1 >>>>>>>>>>>>>> [canon_dr] 300 dpi: 1 >>>>>>>>>>>>>> [canon_dr] 320 dpi: 0 >>>>>>>>>>>>>> [canon_dr] 400 dpi: 0 >>>>>>>>>>>>>> [canon_dr] 480 dpi: 0 >>>>>>>>>>>>>> [canon_dr] 600 dpi: 0 >>>>>>>>>>>>>> [canon_dr] 800 dpi: 0 >>>>>>>>>>>>>> [canon_dr] 1200 dpi: 0 >>>>>>>>>>>>>> [canon_dr] max width: 13952 (11.63 in) >>>>>>>>>>>>>> [canon_dr] max length: 20408 (17.01 in) >>>>>>>>>>>>>> [canon_dr] AWD: 0 >>>>>>>>>>>>>> [canon_dr] CE Emphasis: 0 >>>>>>>>>>>>>> [canon_dr] C Emphasis: 0 >>>>>>>>>>>>>> [canon_dr] High quality: 0 >>>>>>>>>>>>>> [canon_dr] grayscale: 1 >>>>>>>>>>>>>> [canon_dr] halftone: 1 >>>>>>>>>>>>>> [canon_dr] monochrome: 1 >>>>>>>>>>>>>> [canon_dr] overflow: 0 >>>>>>>>>>>>>> [canon_dr] init_vpd: finish >>>>>>>>>>>>>> [canon_dr] init_model: start >>>>>>>>>>>>>> [canon_dr] init_model: finish >>>>>>>>>>>>>> [canon_dr] init_panel: start >>>>>>>>>>>>>> [canon_dr] read_panel: start >>>>>>>>>>>>>> [canon_dr] read_panel: finish 0 >>>>>>>>>>>>>> [canon_dr] send_panel: start >>>>>>>>>>>>>> [canon_dr] send_panel: unsupported, finishing >>>>>>>>>>>>>> [canon_dr] init_panel: finish >>>>>>>>>>>>>> [canon_dr] init_user: start >>>>>>>>>>>>>> [canon_dr] init_user: finish >>>>>>>>>>>>>> [canon_dr] init_options: start >>>>>>>>>>>>>> [canon_dr] init_options: finish >>>>>>>>>>>>>> [canon_dr] disconnect_fd: start >>>>>>>>>>>>>> [canon_dr] disconnecting scsi device >>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish >>>>>>>>>>>>>> [canon_dr] attach_one: finish >>>>>>>>>>>>>> [canon_dr] sane_get_devices: found scanner /dev/sg2 >>>>>>>>>>>>>> [canon_dr] sane_get_devices: found 1 scanner(s) >>>>>>>>>>>>>> [canon_dr] sane_get_devices: finish >>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 requested >>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 found >>>>>>>>>>>>>> [canon_dr] connect_fd: start >>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device >>>>>>>>>>>>>> [canon_dr] wait_scanner: start >>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start >>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes >>>>>>>>>>>>>> [canon_dr] cmd:>> >>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00 >>>>>>>>>>>>>> ...... >>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish >>>>>>>>>>>>>> [canon_dr] wait_scanner: finish >>>>>>>>>>>>>> [canon_dr] connect_fd: finish >>>>>>>>>>>>>> [canon_dr] sane_open: finish >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0 >>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for '' (0) >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0 >>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for '' (0) >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 1 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 2 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 3 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 4 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 5 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 6 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 7 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 10 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 11 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 12 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 13 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 14 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 15 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 16 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 17 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 18 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 19 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 20 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 21 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 22 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 23 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 24 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 25 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 26 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 27 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 28 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 29 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 30 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 31 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 32 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 33 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 34 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 35 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 36 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 37 >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 38 >>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'br-x' (8) >>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-x' (6) >>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'br-y' (9) >>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-y' (7) >>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-x' (6) >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8 >>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for 'br-x' (8) >>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-y' (7) >>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9 >>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for 'br-y' (9) >>>>>>>>>>>>>> scanimage: output is not a file, exiting >>>>>>>>>>>>>> [canon_dr] sane_close: start >>>>>>>>>>>>>> [canon_dr] disconnect_fd: start >>>>>>>>>>>>>> [canon_dr] disconnecting scsi device >>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish >>>>>>>>>>>>>> [canon_dr] image_buffers: start >>>>>>>>>>>>>> [canon_dr] image_buffers: finish >>>>>>>>>>>>>> [canon_dr] offset_buffers: start >>>>>>>>>>>>>> [canon_dr] offset_buffers: finish >>>>>>>>>>>>>> [canon_dr] gain_buffers: start >>>>>>>>>>>>>> [canon_dr] gain_buffers: finish >>>>>>>>>>>>>> [canon_dr] sane_close: finish >>>>>>>>>>>>>> [canon_dr] sane_exit: start >>>>>>>>>>>>>> [canon_dr] disconnect_fd: start >>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish >>>>>>>>>>>>>> [canon_dr] sane_exit: finish >>>>>>>>>>>>>> >>>>>>>>>>>>>> Any idea ? >>>>>>>>>>>>>> >>>>>>>>>>>>>> Christophe. >>>>>>>>>>>>>> -- >>>>>>>>>>>>>> Christophe Largeau >>>>>>>>>>>>>> Alixen >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>>>>> sane-devel mailing list: sane-devel at lists.alioth.debian.org >>>>>>>>>>>>>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel >>>>>>>>>>>>>> Unsubscribe: Send mail with subject "unsubscribe >>>>>>>>>>>>>> your_password" >>>>>>>>>>>>>> to sane-devel-request at lists.alioth.debian.org >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> "The truth is an offense, but not a sin" >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> Christophe Largeau >>>>>>>>>>> Alixen >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> Christophe Largeau >>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> Christophe Largeau >>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>> >>>> -- >>>> Christophe Largeau >>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>> >>> >>> >>> >>> -- >>> "The truth is an offense, but not a sin" >>> >> >> >> > > > -- > Christophe Largeau > Alixen 20 rue Jean Rostand 91 400 Orsay > Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 > -- "The truth is an offense, but not a sin"
