Ok for other tests based on the resolution. I've done more tests just "to see" : - loading 2 A4 sheets on the scanner feeder => only one processed - I've placed one A4 sheet in the feeder but in a landscape position : nice try (no left or right side ;) )
I also thought about the log of windows driver. Christophe. Le 05/01/2011 13:56, m. allan noah a ?crit : > Ok. Perhaps you can do some more tests in grayscale with sane, where > you change something like resolution or the scan width each time. I > want to make sure that gray works properly. If you find any problems, > please send the logs and the command line you used. > > After that, I am afraid we will need to get another log of the windows > driver, this time making a black&white scan. > > allan > > On Wed, Jan 5, 2011 at 5:50 AM, Christophe Largeau (liste) > <liste at alixen.fr> wrote: >> just done test7 (Lineart mode). The result is a black image ( >> http://dl.free.fr/bDipeF5mF >> ) >> >> Christophe. >> >> Le 05/01/2011 09:23, Christophe Largeau (liste) a ?crit : >>> >>> Great, it's working fine (see the test6.tar.gz at >>> http://dl.free.fr/bGEgn9yFu ) >>> >>> I'll make series of tests at other resolutions. >>> >>> Thanx. >>> >>> Le 04/01/2011 17:53, m. allan noah a ?crit : >>>> >>>> ok- let us try again, slightly updated file. >>>> >>>> allan >>>> >>>> On Tue, Jan 4, 2011 at 11:26 AM, Christophe Largeau (liste) >>>> <liste at alixen.fr> wrote: >>>>> >>>>> Hi, >>>>> >>>>> thank you for the new version. >>>>> >>>>> The scan is not exactly what it should be (see the file >>>>> test5.tar.gz). The >>>>> scanned image is not at the right position. Probably a shift problem. >>>>> >>>>> Note that for all the tests I've done it was a A4 paper and the Canon >>>>> DR-5060-F is a A3 scanner. >>>>> >>>>> the file test5.tar.gz can be downloaded here : >>>>> http://dl.free.fr/baKWwnrcy >>>>> >>>>> Christophe. >>>>> >>>>> Le 04/01/2011 16:23, m. allan noah a ?crit : >>>>>> >>>>>> here is a new version of two files. use these to replace your existing >>>>>> copies, and recompile. This should contain all of your current fixes, >>>>>> and it should (hopefully) produce proper grayscale scans. >>>>>> >>>>>> If you can test this also in lineart mode, it might need the same >>>>>> width fix as grayscale... >>>>>> >>>>>> allan >>>>>> >>>>>> On Tue, Jan 4, 2011 at 4:33 AM, Christophe Largeau (liste) >>>>>> <liste at alixen.fr> wrote: >>>>>>> >>>>>>> Thank you for the information, waiting for your fix. >>>>>>> >>>>>>> Christophe. >>>>>>> >>>>>>> Le 03/01/2011 20:03, m. allan noah a ?crit : >>>>>>>> >>>>>>>> It appears that the corrupt image is because the scanner sends us >>>>>>>> 1728 >>>>>>>> pixels per line, but we asked for only 1700. Likely this means that >>>>>>>> the scanner is limited to image widths which are a multiple of 32 >>>>>>>> pixels. I will see if I can come up with a fix. >>>>>>>> >>>>>>>> allan >>>>>>>> >>>>>>>> On Mon, Jan 3, 2011 at 12:54 PM, m. allan noah<kitno455 at gmail.com> >>>>>>>> wrote: >>>>>>>>> >>>>>>>>> jpg destroys too much image information. Any chance to can compress >>>>>>>>> the pnm instead, and send that to me directly? >>>>>>>>> >>>>>>>>> allan >>>>>>>>> >>>>>>>>> On Mon, Jan 3, 2011 at 12:11 PM, Christophe Largeau (liste) >>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>> >>>>>>>>>> OK, >>>>>>>>>> >>>>>>>>>> my A4 page (basically 0.5 millimeter squares) has been processed >>>>>>>>>> >>>>>>>>>> you can view the result here >>>>>>>>>> http://i37.servimg.com/u/f37/15/57/48/39/test3p10.jpg : not >>>>>>>>>> really the >>>>>>>>>> expected result ;) >>>>>>>>>> >>>>>>>>>> You'll find the compressed test3.log attached to this message. >>>>>>>>>> >>>>>>>>>> Do you need other informations for ssm_df() and ssm_do() >>>>>>>>>> debugging ? >>>>>>>>>> >>>>>>>>>> Christophe. >>>>>>>>>> >>>>>>>>>> Le 03/01/2011 17:45, m. allan noah a ?crit : >>>>>>>>>>> >>>>>>>>>>> Ah- same thing, this time also comment out ssm_df(). It would >>>>>>>>>>> be nice >>>>>>>>>>> to get those two commands working for your machine (if they are >>>>>>>>>>> supported by the hardware), but they are not required for proper >>>>>>>>>>> functioning. >>>>>>>>>>> >>>>>>>>>>> allan >>>>>>>>>>> >>>>>>>>>>> On Mon, Jan 3, 2011 at 11:40 AM, Christophe Largeau (liste) >>>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>>> >>>>>>>>>>>> Here is the new test2.log ;) >>>>>>>>>>>> >>>>>>>>>>>> Christophe. >>>>>>>>>>>> >>>>>>>>>>>> Le 03/01/2011 17:31, m. allan noah a ?crit : >>>>>>>>>>>>> >>>>>>>>>>>>> Excellent. set_window is now accepted by the scanner, but it >>>>>>>>>>>>> does >>>>>>>>>>>>> not >>>>>>>>>>>>> like our ssm_do() call. So, edit canon_dr.c around line 3273, >>>>>>>>>>>>> and >>>>>>>>>>>>> comment out the call to ssm_do(). Then try again with test2 :) >>>>>>>>>>>>> >>>>>>>>>>>>> allan >>>>>>>>>>>>> >>>>>>>>>>>>> On Mon, Jan 3, 2011 at 11:19 AM, Christophe Largeau (liste) >>>>>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>> Hi, >>>>>>>>>>>>>> >>>>>>>>>>>>>> change, recompile and test done. >>>>>>>>>>>>>> >>>>>>>>>>>>>> The test1pnm file is empty. >>>>>>>>>>>>>> >>>>>>>>>>>>>> The compressed test1.log is attached to this message. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Christophe. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Le 03/01/2011 16:50, m. allan noah a ?crit : >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> ok- can you make some changes, recompile, and test? >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> canon_dr.c in function set_window, around line 3615 comment >>>>>>>>>>>>>>> out >>>>>>>>>>>>>>> these >>>>>>>>>>>>>>> lines: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> set_WD_brightness (desc1, s->brightness+128); >>>>>>>>>>>>>>> set_WD_threshold (desc1, s->threshold); >>>>>>>>>>>>>>> set_WD_contrast (desc1, s->contrast+128); >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Then compile, copy the library, and scan again, using this >>>>>>>>>>>>>>> command: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage --resolution 200 --mode Gray >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> test1pnm 2>test1.log >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Hopefully test1.pnm will contain an image. If not, compress >>>>>>>>>>>>>>> the >>>>>>>>>>>>>>> log >>>>>>>>>>>>>>> and send it to me. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> allan >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Mon, Jan 3, 2011 at 10:11 AM, m. allan >>>>>>>>>>>>>>> noah<kitno455 at gmail.com> >>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Yes- I can see some set window data in it, though I am not >>>>>>>>>>>>>>>> sure >>>>>>>>>>>>>>>> it >>>>>>>>>>>>>>>> is >>>>>>>>>>>>>>>> complete. This sniffer program seems to miss some of the >>>>>>>>>>>>>>>> data. I >>>>>>>>>>>>>>>> will >>>>>>>>>>>>>>>> look some more today. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> allan >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Mon, Jan 3, 2011 at 8:06 AM, Christophe Largeau (liste) >>>>>>>>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Hi, >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> have you checked the log ? Is it helpful ? >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Christophe. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Le 29/12/2010 17:04, Christophe Largeau (liste) a ?crit : >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Thank you. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Note that I'll be away until next monday. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Christophe. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Le 29/12/2010 17:00, m. allan noah a ?crit : >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Thanks. I'll look at it tonight. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> allan >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 10:07 AM, Christophe Largeau >>>>>>>>>>>>>>>>>>> (liste) >>>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> the trace.wsl file taken from the snifer is attached >>>>>>>>>>>>>>>>>>>> to this >>>>>>>>>>>>>>>>>>>> message. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Christophe. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Le 29/12/2010 15:38, m. allan noah a ?crit : >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> the sniffer utility: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> ftp://ftp.compuware.com/pub/driverstudio/outgoing/utility/wdmsniffer.zip >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> We need to use that to capture traffic of a >>>>>>>>>>>>>>>>>>>>> low-resolution >>>>>>>>>>>>>>>>>>>>> black >>>>>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>>>>> white >>>>>>>>>>>>>>>>>>>>> scan. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> I cannot give more specific instructions, because I >>>>>>>>>>>>>>>>>>>>> rarely >>>>>>>>>>>>>>>>>>>>> use >>>>>>>>>>>>>>>>>>>>> this >>>>>>>>>>>>>>>>>>>>> program. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> allan >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 9:29 AM, Christophe Largeau >>>>>>>>>>>>>>>>>>>>> (liste) >>>>>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> I will replug the scsi card into the orignal windows >>>>>>>>>>>>>>>>>>>>>> machine. >>>>>>>>>>>>>>>>>>>>>> Do >>>>>>>>>>>>>>>>>>>>>> you have >>>>>>>>>>>>>>>>>>>>>> instruction for the log capture on windows ? >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Christophe. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Le 29/12/2010 15:22, m. allan noah a ?crit : >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> hmm- it is mad about something we ask it to do in >>>>>>>>>>>>>>>>>>>>>>> the set >>>>>>>>>>>>>>>>>>>>>>> window >>>>>>>>>>>>>>>>>>>>>>> command. I don't have a protocol manual for this >>>>>>>>>>>>>>>>>>>>>>> machine, >>>>>>>>>>>>>>>>>>>>>>> so >>>>>>>>>>>>>>>>>>>>>>> we >>>>>>>>>>>>>>>>>>>>>>> have >>>>>>>>>>>>>>>>>>>>>>> to guess what the problem is. Or, we have to try and >>>>>>>>>>>>>>>>>>>>>>> capture a >>>>>>>>>>>>>>>>>>>>>>> log >>>>>>>>>>>>>>>>>>>>>>> from Windows driver. Can you use this machine on >>>>>>>>>>>>>>>>>>>>>>> windows? >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> allan >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:55 AM, Christophe Largeau >>>>>>>>>>>>>>>>>>>>>>> (liste) >>>>>>>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> the new dr.log is attached to this message. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Christophe. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Le 29/12/2010 14:46, m. allan noah a ?crit : >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> Sorry, hit 'send' too soon- you should try: >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d >>>>>>>>>>>>>>>>>>>>>>>>> canon_dr:/dev/sg2 >>>>>>>>>>>>>>>>>>>>>>>>> 2>dr.log>dr.pnm >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> allan >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:35 AM, m. allan >>>>>>>>>>>>>>>>>>>>>>>>> noah<kitno455 at gmail.com> >>>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> "scanimage: output is not a file, exiting" >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> allan >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:23 AM, Christophe Largeau >>>>>>>>>>>>>>>>>>>>>>>>>> (liste) >>>>>>>>>>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Hi, >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> I'm testing Canon DR-5060-F (SCSI) under Ubuntu >>>>>>>>>>>>>>>>>>>>>>>>>>> 10.10 >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> ii libsane 1.0.21-2ubuntu2 >>>>>>>>>>>>>>>>>>>>>>>>>>> API >>>>>>>>>>>>>>>>>>>>>>>>>>> library for scanners >>>>>>>>>>>>>>>>>>>>>>>>>>> ii sane-utils 1.0.21-2ubuntu2 >>>>>>>>>>>>>>>>>>>>>>>>>>> API >>>>>>>>>>>>>>>>>>>>>>>>>>> library for scanners -- utilities >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> The sane-find-scanner commands returns : >>>>>>>>>>>>>>>>>>>>>>>>>>> # sane-find-scanner will now attempt to detect >>>>>>>>>>>>>>>>>>>>>>>>>>> your >>>>>>>>>>>>>>>>>>>>>>>>>>> scanner. >>>>>>>>>>>>>>>>>>>>>>>>>>> If the >>>>>>>>>>>>>>>>>>>>>>>>>>> # result is different from what you expected, >>>>>>>>>>>>>>>>>>>>>>>>>>> first >>>>>>>>>>>>>>>>>>>>>>>>>>> make >>>>>>>>>>>>>>>>>>>>>>>>>>> sure >>>>>>>>>>>>>>>>>>>>>>>>>>> your >>>>>>>>>>>>>>>>>>>>>>>>>>> # scanner is powered up and properly connected to >>>>>>>>>>>>>>>>>>>>>>>>>>> your >>>>>>>>>>>>>>>>>>>>>>>>>>> computer. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> found SCSI scanner "CANON DR-5060F 0110" at >>>>>>>>>>>>>>>>>>>>>>>>>>> /dev/sg2 >>>>>>>>>>>>>>>>>>>>>>>>>>> # Your SCSI scanner was detected. It may or may >>>>>>>>>>>>>>>>>>>>>>>>>>> not >>>>>>>>>>>>>>>>>>>>>>>>>>> be >>>>>>>>>>>>>>>>>>>>>>>>>>> supported by >>>>>>>>>>>>>>>>>>>>>>>>>>> SANE. >>>>>>>>>>>>>>>>>>>>>>>>>>> Try >>>>>>>>>>>>>>>>>>>>>>>>>>> # scanimage -L and read the backend's manpage. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> # No USB scanners found. If you expected something >>>>>>>>>>>>>>>>>>>>>>>>>>> different, >>>>>>>>>>>>>>>>>>>>>>>>>>> make >>>>>>>>>>>>>>>>>>>>>>>>>>> sure >>>>>>>>>>>>>>>>>>>>>>>>>>> that >>>>>>>>>>>>>>>>>>>>>>>>>>> # you have loaded a kernel driver for your USB >>>>>>>>>>>>>>>>>>>>>>>>>>> host >>>>>>>>>>>>>>>>>>>>>>>>>>> controller >>>>>>>>>>>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>>>>>>>>>>> have >>>>>>>>>>>>>>>>>>>>>>>>>>> setup >>>>>>>>>>>>>>>>>>>>>>>>>>> # the USB system correctly. See man sane-usb for >>>>>>>>>>>>>>>>>>>>>>>>>>> details. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> # Not checking for parallel port scanners. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> # Most Scanners connected to the parallel port or >>>>>>>>>>>>>>>>>>>>>>>>>>> other >>>>>>>>>>>>>>>>>>>>>>>>>>> proprietary >>>>>>>>>>>>>>>>>>>>>>>>>>> ports >>>>>>>>>>>>>>>>>>>>>>>>>>> # can't be detected by this program. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> when I tried the command "scanimage -L" the >>>>>>>>>>>>>>>>>>>>>>>>>>> scanner >>>>>>>>>>>>>>>>>>>>>>>>>>> wasn't >>>>>>>>>>>>>>>>>>>>>>>>>>> recognized >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> thanks to this message : >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> http://lists.alioth.debian.org/pipermail/sane-devel/2010-March/026220.html >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> , >>>>>>>>>>>>>>>>>>>>>>>>>>> I've added the following lines to canon_dr.c at >>>>>>>>>>>>>>>>>>>>>>>>>>> line >>>>>>>>>>>>>>>>>>>>>>>>>>> 1203. >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> else if (strstr (s->model_name,"DR-5060F")){ >>>>>>>>>>>>>>>>>>>>>>>>>>> s->can_write_panel = 0; >>>>>>>>>>>>>>>>>>>>>>>>>>> } >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Then I replace the compiled versions of >>>>>>>>>>>>>>>>>>>>>>>>>>> libsane-canon_dr.la >>>>>>>>>>>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>>>>>>>>>>> libsane-canon_dr.so.1.0.21 in /usr/lib/sane >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Now, the "scanimage -L" command returns : >>>>>>>>>>>>>>>>>>>>>>>>>>> device `canon_dr:/dev/sg2' is a CANON DR-5060F >>>>>>>>>>>>>>>>>>>>>>>>>>> scanner >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Great, but the scanner doesn't work : >>>>>>>>>>>>>>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d >>>>>>>>>>>>>>>>>>>>>>>>>>> canon_dr:/dev/sg2 >>>>>>>>>>>>>>>>>>>>>>>>>>> [sanei_debug] Setting debug level of canon_dr >>>>>>>>>>>>>>>>>>>>>>>>>>> to 30. >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: start >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: canon_dr backend 1.0.35, >>>>>>>>>>>>>>>>>>>>>>>>>>> from >>>>>>>>>>>>>>>>>>>>>>>>>>> sane-backends >>>>>>>>>>>>>>>>>>>>>>>>>>> 1.0.21 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: finish >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: start >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: no scanners currently >>>>>>>>>>>>>>>>>>>>>>>>>>> attached, >>>>>>>>>>>>>>>>>>>>>>>>>>> attaching >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: start >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: reading config file >>>>>>>>>>>>>>>>>>>>>>>>>>> canon_dr.conf >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: looking for 'scsi >>>>>>>>>>>>>>>>>>>>>>>>>>> CANON >>>>>>>>>>>>>>>>>>>>>>>>>>> DR' >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: start >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: looking for '/dev/sg2' >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: start >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: cannot get requested buffer >>>>>>>>>>>>>>>>>>>>>>>>>>> size >>>>>>>>>>>>>>>>>>>>>>>>>>> (2097152/524288) >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: start >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>> >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00 >>>>>>>>>>>>>>>>>>>>>>>>>>> ...... >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: finish >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: finish >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: start >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>> >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 12 00 00 00 30 00 >>>>>>>>>>>>>>>>>>>>>>>>>>> ....0. >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: reading 48 bytes >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in:<< >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 06 00 02 02 1f 00 00 10 43 41 >>>>>>>>>>>>>>>>>>>>>>>>>>> 4e 4f >>>>>>>>>>>>>>>>>>>>>>>>>>> 4e >>>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>>> ........CANON >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 010: 44 52 2d 35 30 36 30 46 20 20 >>>>>>>>>>>>>>>>>>>>>>>>>>> 20 20 >>>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>>> DR-5060F >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 020: 30 31 31 30 32 30 30 31 30 36 >>>>>>>>>>>>>>>>>>>>>>>>>>> 30 37 >>>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>>> 011020010607 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: read 48 bytes >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: Found CANON scanner >>>>>>>>>>>>>>>>>>>>>>>>>>> DR-5060F >>>>>>>>>>>>>>>>>>>>>>>>>>> version >>>>>>>>>>>>>>>>>>>>>>>>>>> 0110 >>>>>>>>>>>>>>>>>>>>>>>>>>> at >>>>>>>>>>>>>>>>>>>>>>>>>>> /dev/sg2 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: finish >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: start >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>> >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 12 01 f0 00 1e 00 >>>>>>>>>>>>>>>>>>>>>>>>>>> ...... >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: reading 30 bytes >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in:<< >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 06 f0 02 00 23 01 2c 01 2c a5 >>>>>>>>>>>>>>>>>>>>>>>>>>> 01 2c >>>>>>>>>>>>>>>>>>>>>>>>>>> 01 >>>>>>>>>>>>>>>>>>>>>>>>>>> 2c >>>>>>>>>>>>>>>>>>>>>>>>>>> 00 >>>>>>>>>>>>>>>>>>>>>>>>>>> c8 >>>>>>>>>>>>>>>>>>>>>>>>>>> ....#.,.,..,.,.. >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 010: 00 64 01 c0 00 00 0d a0 00 00 >>>>>>>>>>>>>>>>>>>>>>>>>>> 13 ee >>>>>>>>>>>>>>>>>>>>>>>>>>> 0e >>>>>>>>>>>>>>>>>>>>>>>>>>> 00 >>>>>>>>>>>>>>>>>>>>>>>>>>> .d............ >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: read 30 bytes >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: length=23 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] standard options >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] basic x res: 300 dpi >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] basic y res: 300 dpi >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] step x res: 1 dpi >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] step y res: 0 dpi >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max x res: 300 dpi >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max y res: 300 dpi >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] min x res: 200 dpi >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] min y res: 100 dpi >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 60 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 75 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 100 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 120 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 150 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 160 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 180 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 200 dpi: 1 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 240 dpi: 1 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 300 dpi: 1 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 320 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 400 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 480 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 600 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 800 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 1200 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max width: 13952 (11.63 in) >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max length: 20408 (17.01 in) >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] AWD: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] CE Emphasis: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] C Emphasis: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] High quality: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] grayscale: 1 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] halftone: 1 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] monochrome: 1 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] overflow: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: finish >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_model: start >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_model: finish >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_panel: start >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] read_panel: start >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] read_panel: finish 0 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] send_panel: start >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] send_panel: unsupported, finishing >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_panel: finish >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_user: start >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_user: finish >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_options: start >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_options: finish >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnecting scsi device >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: finish >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: found scanner >>>>>>>>>>>>>>>>>>>>>>>>>>> /dev/sg2 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: found 1 scanner(s) >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: finish >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 requested >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 found >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: start >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: start >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>> >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00 >>>>>>>>>>>>>>>>>>>>>>>>>>> ...... >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: finish >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: finish >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: finish >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for >>>>>>>>>>>>>>>>>>>>>>>>>>> '' (0) >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for >>>>>>>>>>>>>>>>>>>>>>>>>>> '' (0) >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 1 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 2 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 3 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 4 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 5 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 6 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 7 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 10 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 11 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 12 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 13 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 14 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 15 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 16 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 17 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 18 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 19 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 20 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 21 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 22 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 23 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 24 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 25 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 26 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 27 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 28 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 29 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 30 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 31 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 32 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 33 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 34 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 35 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 36 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 37 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 38 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for >>>>>>>>>>>>>>>>>>>>>>>>>>> 'br-x' >>>>>>>>>>>>>>>>>>>>>>>>>>> (8) >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for >>>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-x' >>>>>>>>>>>>>>>>>>>>>>>>>>> (6) >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for >>>>>>>>>>>>>>>>>>>>>>>>>>> 'br-y' >>>>>>>>>>>>>>>>>>>>>>>>>>> (9) >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for >>>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-y' >>>>>>>>>>>>>>>>>>>>>>>>>>> (7) >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for >>>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-x' >>>>>>>>>>>>>>>>>>>>>>>>>>> (6) >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for >>>>>>>>>>>>>>>>>>>>>>>>>>> 'br-x' >>>>>>>>>>>>>>>>>>>>>>>>>>> (8) >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for >>>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-y' >>>>>>>>>>>>>>>>>>>>>>>>>>> (7) >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9 >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for >>>>>>>>>>>>>>>>>>>>>>>>>>> 'br-y' >>>>>>>>>>>>>>>>>>>>>>>>>>> (9) >>>>>>>>>>>>>>>>>>>>>>>>>>> scanimage: output is not a file, exiting >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_close: start >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnecting scsi device >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] image_buffers: start >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] image_buffers: finish >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] offset_buffers: start >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] offset_buffers: finish >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] gain_buffers: start >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] gain_buffers: finish >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_close: finish >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_exit: start >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish >>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_exit: finish >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Any idea ? >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Christophe. >>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>> Christophe Largeau >>>>>>>>>>>>>>>>>>>>>>>>>>> Alixen >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>> sane-devel mailing list: >>>>>>>>>>>>>>>>>>>>>>>>>>> sane-devel at lists.alioth.debian.org >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Unsubscribe: Send mail with subject "unsubscribe >>>>>>>>>>>>>>>>>>>>>>>>>>> your_password" >>>>>>>>>>>>>>>>>>>>>>>>>>> to sane-devel-request at lists.alioth.debian.org >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>> "The truth is an offense, but not a sin" >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>> Christophe Largeau >>>>>>>>>>>>>>>>>>>>>>>> Alixen >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>> Christophe Largeau >>>>>>>>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>>>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>> Christophe Largeau >>>>>>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>> Christophe Largeau >>>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>> "The truth is an offense, but not a sin" >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>>>>> Christophe Largeau >>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> Christophe Largeau >>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> Christophe Largeau >>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> "The truth is an offense, but not a sin" >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> Christophe Largeau >>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>>> -- >>>>> Christophe Largeau >>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>> >>>> >>>> >>>> >>> >>> >> >> -- >> Christophe Largeau >> Alixen 20 rue Jean Rostand 91 400 Orsay >> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >> > > > -- Christophe Largeau Alixen 20 rue Jean Rostand 91 400 Orsay Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
