Here is the new test2.log ;) Christophe.
Le 03/01/2011 17:31, m. allan noah a ?crit : > Excellent. set_window is now accepted by the scanner, but it does not > like our ssm_do() call. So, edit canon_dr.c around line 3273, and > comment out the call to ssm_do(). Then try again with test2 :) > > allan > > On Mon, Jan 3, 2011 at 11:19 AM, Christophe Largeau (liste) > <liste at alixen.fr> wrote: >> Hi, >> >> change, recompile and test done. >> >> The test1pnm file is empty. >> >> The compressed test1.log is attached to this message. >> >> Christophe. >> >> Le 03/01/2011 16:50, m. allan noah a ?crit : >>> >>> ok- can you make some changes, recompile, and test? >>> >>> canon_dr.c in function set_window, around line 3615 comment out these >>> lines: >>> >>> set_WD_brightness (desc1, s->brightness+128); >>> set_WD_threshold (desc1, s->threshold); >>> set_WD_contrast (desc1, s->contrast+128); >>> >>> Then compile, copy the library, and scan again, using this command: >>> >>> SANE_DEBUG_CANON_DR=30 scanimage --resolution 200 --mode Gray >>>> >>>> test1pnm 2>test1.log >>> >>> Hopefully test1.pnm will contain an image. If not, compress the log >>> and send it to me. >>> >>> allan >>> >>> On Mon, Jan 3, 2011 at 10:11 AM, m. allan noah<kitno455 at gmail.com> >>> wrote: >>>> >>>> Yes- I can see some set window data in it, though I am not sure it is >>>> complete. This sniffer program seems to miss some of the data. I will >>>> look some more today. >>>> >>>> allan >>>> >>>> On Mon, Jan 3, 2011 at 8:06 AM, Christophe Largeau (liste) >>>> <liste at alixen.fr> wrote: >>>>> >>>>> Hi, >>>>> >>>>> have you checked the log ? Is it helpful ? >>>>> >>>>> Christophe. >>>>> >>>>> Le 29/12/2010 17:04, Christophe Largeau (liste) a ?crit : >>>>>> >>>>>> Thank you. >>>>>> >>>>>> Note that I'll be away until next monday. >>>>>> >>>>>> Christophe. >>>>>> >>>>>> Le 29/12/2010 17:00, m. allan noah a ?crit : >>>>>>> >>>>>>> Thanks. I'll look at it tonight. >>>>>>> >>>>>>> allan >>>>>>> >>>>>>> On Wed, Dec 29, 2010 at 10:07 AM, Christophe Largeau (liste) >>>>>>> <liste at alixen.fr> wrote: >>>>>>>> >>>>>>>> the trace.wsl file taken from the snifer is attached to this message. >>>>>>>> >>>>>>>> Christophe. >>>>>>>> >>>>>>>> >>>>>>>> Le 29/12/2010 15:38, m. allan noah a ?crit : >>>>>>>>> >>>>>>>>> the sniffer utility: >>>>>>>>> >>>>>>>>> >>>>>>>>> ftp://ftp.compuware.com/pub/driverstudio/outgoing/utility/wdmsniffer.zip >>>>>>>>> >>>>>>>>> >>>>>>>>> We need to use that to capture traffic of a low-resolution black and >>>>>>>>> white >>>>>>>>> scan. >>>>>>>>> >>>>>>>>> I cannot give more specific instructions, because I rarely use this >>>>>>>>> program. >>>>>>>>> >>>>>>>>> allan >>>>>>>>> >>>>>>>>> On Wed, Dec 29, 2010 at 9:29 AM, Christophe Largeau (liste) >>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>> >>>>>>>>>> I will replug the scsi card into the orignal windows machine. Do >>>>>>>>>> you have >>>>>>>>>> instruction for the log capture on windows ? >>>>>>>>>> >>>>>>>>>> Christophe. >>>>>>>>>> >>>>>>>>>> Le 29/12/2010 15:22, m. allan noah a ?crit : >>>>>>>>>>> >>>>>>>>>>> hmm- it is mad about something we ask it to do in the set window >>>>>>>>>>> command. I don't have a protocol manual for this machine, so we >>>>>>>>>>> have >>>>>>>>>>> to guess what the problem is. Or, we have to try and capture a log >>>>>>>>>>> from Windows driver. Can you use this machine on windows? >>>>>>>>>>> >>>>>>>>>>> allan >>>>>>>>>>> >>>>>>>>>>> On Wed, Dec 29, 2010 at 8:55 AM, Christophe Largeau (liste) >>>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>>> >>>>>>>>>>>> the new dr.log is attached to this message. >>>>>>>>>>>> >>>>>>>>>>>> Christophe. >>>>>>>>>>>> >>>>>>>>>>>> Le 29/12/2010 14:46, m. allan noah a ?crit : >>>>>>>>>>>>> >>>>>>>>>>>>> Sorry, hit 'send' too soon- you should try: >>>>>>>>>>>>> >>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d canon_dr:/dev/sg2 >>>>>>>>>>>>> 2>dr.log>dr.pnm >>>>>>>>>>>>> >>>>>>>>>>>>> allan >>>>>>>>>>>>> >>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:35 AM, m. allan >>>>>>>>>>>>> noah<kitno455 at gmail.com> >>>>>>>>>>>>> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>> "scanimage: output is not a file, exiting" >>>>>>>>>>>>>> >>>>>>>>>>>>>> allan >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:23 AM, Christophe Largeau (liste) >>>>>>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Hi, >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I'm testing Canon DR-5060-F (SCSI) under Ubuntu 10.10 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> ii libsane 1.0.21-2ubuntu2 >>>>>>>>>>>>>>> API >>>>>>>>>>>>>>> library for scanners >>>>>>>>>>>>>>> ii sane-utils 1.0.21-2ubuntu2 >>>>>>>>>>>>>>> API >>>>>>>>>>>>>>> library for scanners -- utilities >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> The sane-find-scanner commands returns : >>>>>>>>>>>>>>> # sane-find-scanner will now attempt to detect your scanner. >>>>>>>>>>>>>>> If the >>>>>>>>>>>>>>> # result is different from what you expected, first make sure >>>>>>>>>>>>>>> your >>>>>>>>>>>>>>> # scanner is powered up and properly connected to your >>>>>>>>>>>>>>> computer. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> found SCSI scanner "CANON DR-5060F 0110" at /dev/sg2 >>>>>>>>>>>>>>> # Your SCSI scanner was detected. It may or may not be >>>>>>>>>>>>>>> supported by >>>>>>>>>>>>>>> SANE. >>>>>>>>>>>>>>> Try >>>>>>>>>>>>>>> # scanimage -L and read the backend's manpage. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> # No USB scanners found. If you expected something different, >>>>>>>>>>>>>>> make >>>>>>>>>>>>>>> sure >>>>>>>>>>>>>>> that >>>>>>>>>>>>>>> # you have loaded a kernel driver for your USB host controller >>>>>>>>>>>>>>> and >>>>>>>>>>>>>>> have >>>>>>>>>>>>>>> setup >>>>>>>>>>>>>>> # the USB system correctly. See man sane-usb for details. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> # Not checking for parallel port scanners. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> # Most Scanners connected to the parallel port or other >>>>>>>>>>>>>>> proprietary >>>>>>>>>>>>>>> ports >>>>>>>>>>>>>>> # can't be detected by this program. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> when I tried the command "scanimage -L" the scanner wasn't >>>>>>>>>>>>>>> recognized >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> thanks to this message : >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> http://lists.alioth.debian.org/pipermail/sane-devel/2010-March/026220.html >>>>>>>>>>>>>>> , >>>>>>>>>>>>>>> I've added the following lines to canon_dr.c at line 1203. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> else if (strstr (s->model_name,"DR-5060F")){ >>>>>>>>>>>>>>> s->can_write_panel = 0; >>>>>>>>>>>>>>> } >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Then I replace the compiled versions of libsane-canon_dr.la >>>>>>>>>>>>>>> and >>>>>>>>>>>>>>> libsane-canon_dr.so.1.0.21 in /usr/lib/sane >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Now, the "scanimage -L" command returns : >>>>>>>>>>>>>>> device `canon_dr:/dev/sg2' is a CANON DR-5060F scanner >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Great, but the scanner doesn't work : >>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d canon_dr:/dev/sg2 >>>>>>>>>>>>>>> [sanei_debug] Setting debug level of canon_dr to 30. >>>>>>>>>>>>>>> [canon_dr] sane_init: start >>>>>>>>>>>>>>> [canon_dr] sane_init: canon_dr backend 1.0.35, from >>>>>>>>>>>>>>> sane-backends >>>>>>>>>>>>>>> 1.0.21 >>>>>>>>>>>>>>> [canon_dr] sane_init: finish >>>>>>>>>>>>>>> [canon_dr] sane_open: start >>>>>>>>>>>>>>> [canon_dr] sane_open: no scanners currently attached, >>>>>>>>>>>>>>> attaching >>>>>>>>>>>>>>> [canon_dr] sane_get_devices: start >>>>>>>>>>>>>>> [canon_dr] sane_get_devices: reading config file canon_dr.conf >>>>>>>>>>>>>>> [canon_dr] sane_get_devices: looking for 'scsi CANON DR' >>>>>>>>>>>>>>> [canon_dr] attach_one: start >>>>>>>>>>>>>>> [canon_dr] attach_one: looking for '/dev/sg2' >>>>>>>>>>>>>>> [canon_dr] connect_fd: start >>>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device >>>>>>>>>>>>>>> [canon_dr] connect_fd: cannot get requested buffer size >>>>>>>>>>>>>>> (2097152/524288) >>>>>>>>>>>>>>> [canon_dr] wait_scanner: start >>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start >>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes >>>>>>>>>>>>>>> [canon_dr] cmd:>> >>>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00 >>>>>>>>>>>>>>> ...... >>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish >>>>>>>>>>>>>>> [canon_dr] wait_scanner: finish >>>>>>>>>>>>>>> [canon_dr] connect_fd: finish >>>>>>>>>>>>>>> [canon_dr] init_inquire: start >>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start >>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes >>>>>>>>>>>>>>> [canon_dr] cmd:>> >>>>>>>>>>>>>>> [canon_dr] 000: 12 00 00 00 30 00 >>>>>>>>>>>>>>> ....0. >>>>>>>>>>>>>>> [canon_dr] in: reading 48 bytes >>>>>>>>>>>>>>> [canon_dr] in:<< >>>>>>>>>>>>>>> [canon_dr] 000: 06 00 02 02 1f 00 00 10 43 41 4e 4f 4e 20 20 >>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>> ........CANON >>>>>>>>>>>>>>> [canon_dr] 010: 44 52 2d 35 30 36 30 46 20 20 20 20 20 20 20 >>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>> DR-5060F >>>>>>>>>>>>>>> [canon_dr] 020: 30 31 31 30 32 30 30 31 30 36 30 37 20 20 20 >>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>> 011020010607 >>>>>>>>>>>>>>> [canon_dr] in: read 48 bytes >>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish >>>>>>>>>>>>>>> [canon_dr] init_inquire: Found CANON scanner DR-5060F version >>>>>>>>>>>>>>> 0110 >>>>>>>>>>>>>>> at >>>>>>>>>>>>>>> /dev/sg2 >>>>>>>>>>>>>>> [canon_dr] init_inquire: finish >>>>>>>>>>>>>>> [canon_dr] init_vpd: start >>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start >>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes >>>>>>>>>>>>>>> [canon_dr] cmd:>> >>>>>>>>>>>>>>> [canon_dr] 000: 12 01 f0 00 1e 00 >>>>>>>>>>>>>>> ...... >>>>>>>>>>>>>>> [canon_dr] in: reading 30 bytes >>>>>>>>>>>>>>> [canon_dr] in:<< >>>>>>>>>>>>>>> [canon_dr] 000: 06 f0 02 00 23 01 2c 01 2c a5 01 2c 01 2c 00 >>>>>>>>>>>>>>> c8 >>>>>>>>>>>>>>> ....#.,.,..,.,.. >>>>>>>>>>>>>>> [canon_dr] 010: 00 64 01 c0 00 00 0d a0 00 00 13 ee 0e 00 >>>>>>>>>>>>>>> .d............ >>>>>>>>>>>>>>> [canon_dr] in: read 30 bytes >>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish >>>>>>>>>>>>>>> [canon_dr] init_vpd: length=23 >>>>>>>>>>>>>>> [canon_dr] standard options >>>>>>>>>>>>>>> [canon_dr] basic x res: 300 dpi >>>>>>>>>>>>>>> [canon_dr] basic y res: 300 dpi >>>>>>>>>>>>>>> [canon_dr] step x res: 1 dpi >>>>>>>>>>>>>>> [canon_dr] step y res: 0 dpi >>>>>>>>>>>>>>> [canon_dr] max x res: 300 dpi >>>>>>>>>>>>>>> [canon_dr] max y res: 300 dpi >>>>>>>>>>>>>>> [canon_dr] min x res: 200 dpi >>>>>>>>>>>>>>> [canon_dr] min y res: 100 dpi >>>>>>>>>>>>>>> [canon_dr] 60 dpi: 0 >>>>>>>>>>>>>>> [canon_dr] 75 dpi: 0 >>>>>>>>>>>>>>> [canon_dr] 100 dpi: 0 >>>>>>>>>>>>>>> [canon_dr] 120 dpi: 0 >>>>>>>>>>>>>>> [canon_dr] 150 dpi: 0 >>>>>>>>>>>>>>> [canon_dr] 160 dpi: 0 >>>>>>>>>>>>>>> [canon_dr] 180 dpi: 0 >>>>>>>>>>>>>>> [canon_dr] 200 dpi: 1 >>>>>>>>>>>>>>> [canon_dr] 240 dpi: 1 >>>>>>>>>>>>>>> [canon_dr] 300 dpi: 1 >>>>>>>>>>>>>>> [canon_dr] 320 dpi: 0 >>>>>>>>>>>>>>> [canon_dr] 400 dpi: 0 >>>>>>>>>>>>>>> [canon_dr] 480 dpi: 0 >>>>>>>>>>>>>>> [canon_dr] 600 dpi: 0 >>>>>>>>>>>>>>> [canon_dr] 800 dpi: 0 >>>>>>>>>>>>>>> [canon_dr] 1200 dpi: 0 >>>>>>>>>>>>>>> [canon_dr] max width: 13952 (11.63 in) >>>>>>>>>>>>>>> [canon_dr] max length: 20408 (17.01 in) >>>>>>>>>>>>>>> [canon_dr] AWD: 0 >>>>>>>>>>>>>>> [canon_dr] CE Emphasis: 0 >>>>>>>>>>>>>>> [canon_dr] C Emphasis: 0 >>>>>>>>>>>>>>> [canon_dr] High quality: 0 >>>>>>>>>>>>>>> [canon_dr] grayscale: 1 >>>>>>>>>>>>>>> [canon_dr] halftone: 1 >>>>>>>>>>>>>>> [canon_dr] monochrome: 1 >>>>>>>>>>>>>>> [canon_dr] overflow: 0 >>>>>>>>>>>>>>> [canon_dr] init_vpd: finish >>>>>>>>>>>>>>> [canon_dr] init_model: start >>>>>>>>>>>>>>> [canon_dr] init_model: finish >>>>>>>>>>>>>>> [canon_dr] init_panel: start >>>>>>>>>>>>>>> [canon_dr] read_panel: start >>>>>>>>>>>>>>> [canon_dr] read_panel: finish 0 >>>>>>>>>>>>>>> [canon_dr] send_panel: start >>>>>>>>>>>>>>> [canon_dr] send_panel: unsupported, finishing >>>>>>>>>>>>>>> [canon_dr] init_panel: finish >>>>>>>>>>>>>>> [canon_dr] init_user: start >>>>>>>>>>>>>>> [canon_dr] init_user: finish >>>>>>>>>>>>>>> [canon_dr] init_options: start >>>>>>>>>>>>>>> [canon_dr] init_options: finish >>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start >>>>>>>>>>>>>>> [canon_dr] disconnecting scsi device >>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish >>>>>>>>>>>>>>> [canon_dr] attach_one: finish >>>>>>>>>>>>>>> [canon_dr] sane_get_devices: found scanner /dev/sg2 >>>>>>>>>>>>>>> [canon_dr] sane_get_devices: found 1 scanner(s) >>>>>>>>>>>>>>> [canon_dr] sane_get_devices: finish >>>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 requested >>>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 found >>>>>>>>>>>>>>> [canon_dr] connect_fd: start >>>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device >>>>>>>>>>>>>>> [canon_dr] wait_scanner: start >>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start >>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes >>>>>>>>>>>>>>> [canon_dr] cmd:>> >>>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00 >>>>>>>>>>>>>>> ...... >>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish >>>>>>>>>>>>>>> [canon_dr] wait_scanner: finish >>>>>>>>>>>>>>> [canon_dr] connect_fd: finish >>>>>>>>>>>>>>> [canon_dr] sane_open: finish >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0 >>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for '' (0) >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0 >>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for '' (0) >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 1 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 2 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 3 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 4 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 5 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 6 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 7 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 10 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 11 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 12 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 13 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 14 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 15 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 16 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 17 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 18 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 19 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 20 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 21 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 22 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 23 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 24 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 25 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 26 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 27 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 28 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 29 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 30 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 31 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 32 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 33 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 34 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 35 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 36 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 37 >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 38 >>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'br-x' (8) >>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-x' (6) >>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'br-y' (9) >>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-y' (7) >>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-x' (6) >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8 >>>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for 'br-x' (8) >>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-y' (7) >>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9 >>>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for 'br-y' (9) >>>>>>>>>>>>>>> scanimage: output is not a file, exiting >>>>>>>>>>>>>>> [canon_dr] sane_close: start >>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start >>>>>>>>>>>>>>> [canon_dr] disconnecting scsi device >>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish >>>>>>>>>>>>>>> [canon_dr] image_buffers: start >>>>>>>>>>>>>>> [canon_dr] image_buffers: finish >>>>>>>>>>>>>>> [canon_dr] offset_buffers: start >>>>>>>>>>>>>>> [canon_dr] offset_buffers: finish >>>>>>>>>>>>>>> [canon_dr] gain_buffers: start >>>>>>>>>>>>>>> [canon_dr] gain_buffers: finish >>>>>>>>>>>>>>> [canon_dr] sane_close: finish >>>>>>>>>>>>>>> [canon_dr] sane_exit: start >>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start >>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish >>>>>>>>>>>>>>> [canon_dr] sane_exit: finish >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Any idea ? >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Christophe. >>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> Christophe Largeau >>>>>>>>>>>>>>> Alixen >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> sane-devel mailing list: sane-devel at lists.alioth.debian.org >>>>>>>>>>>>>>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel >>>>>>>>>>>>>>> Unsubscribe: Send mail with subject "unsubscribe >>>>>>>>>>>>>>> your_password" >>>>>>>>>>>>>>> to sane-devel-request at lists.alioth.debian.org >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>>>>> "The truth is an offense, but not a sin" >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> Christophe Largeau >>>>>>>>>>>> Alixen >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> Christophe Largeau >>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> Christophe Largeau >>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>> >>>>> -- >>>>> Christophe Largeau >>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>> >>>> >>>> >>>> >>>> -- >>>> "The truth is an offense, but not a sin" >>>> >>> >>> >>> >> >> >> -- >> Christophe Largeau >> Alixen 20 rue Jean Rostand 91 400 Orsay >> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >> > > > -- Christophe Largeau Alixen 20 rue Jean Rostand 91 400 Orsay Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 -------------- next part -------------- A non-text attachment was scrubbed... Name: test2.log.gz Type: application/x-gzip Size: 2596 bytes Desc: not available URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20110103/f499af57/attachment-0001.bin>
