Oops... Sorry. I'll make new tests for the multiple sheets and sizes too.
Christophe. Le 05/01/2011 15:46, m. allan noah a ?crit : > If you wish to get multiple images, or use duplex, you must add the -b > flag to scanimage. it will make multiple image files in the current > directory. see the manpage for naming of files. > > if you wish to change the size of the scan, you must set the paper > size, and then set the width and height of the image. see scanimage > --help for list of options. > > allan > > On Wed, Jan 5, 2011 at 9:43 AM, Christophe Largeau (liste) > <liste at alixen.fr> wrote: >> Ok for other tests based on the resolution. >> >> I've done more tests just "to see" : >> - loading 2 A4 sheets on the scanner feeder => only one processed >> - I've placed one A4 sheet in the feeder but in a landscape position : nice >> try (no left or right side ;) ) >> >> I also thought about the log of windows driver. >> >> Christophe. >> >> Le 05/01/2011 13:56, m. allan noah a ?crit : >>> >>> Ok. Perhaps you can do some more tests in grayscale with sane, where >>> you change something like resolution or the scan width each time. I >>> want to make sure that gray works properly. If you find any problems, >>> please send the logs and the command line you used. >>> >>> After that, I am afraid we will need to get another log of the windows >>> driver, this time making a black&white scan. >>> >>> allan >>> >>> On Wed, Jan 5, 2011 at 5:50 AM, Christophe Largeau (liste) >>> <liste at alixen.fr> wrote: >>>> >>>> just done test7 (Lineart mode). The result is a black image ( >>>> http://dl.free.fr/bDipeF5mF >>>> ) >>>> >>>> Christophe. >>>> >>>> Le 05/01/2011 09:23, Christophe Largeau (liste) a ?crit : >>>>> >>>>> Great, it's working fine (see the test6.tar.gz at >>>>> http://dl.free.fr/bGEgn9yFu ) >>>>> >>>>> I'll make series of tests at other resolutions. >>>>> >>>>> Thanx. >>>>> >>>>> Le 04/01/2011 17:53, m. allan noah a ?crit : >>>>>> >>>>>> ok- let us try again, slightly updated file. >>>>>> >>>>>> allan >>>>>> >>>>>> On Tue, Jan 4, 2011 at 11:26 AM, Christophe Largeau (liste) >>>>>> <liste at alixen.fr> wrote: >>>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> thank you for the new version. >>>>>>> >>>>>>> The scan is not exactly what it should be (see the file >>>>>>> test5.tar.gz). The >>>>>>> scanned image is not at the right position. Probably a shift problem. >>>>>>> >>>>>>> Note that for all the tests I've done it was a A4 paper and the Canon >>>>>>> DR-5060-F is a A3 scanner. >>>>>>> >>>>>>> the file test5.tar.gz can be downloaded here : >>>>>>> http://dl.free.fr/baKWwnrcy >>>>>>> >>>>>>> Christophe. >>>>>>> >>>>>>> Le 04/01/2011 16:23, m. allan noah a ?crit : >>>>>>>> >>>>>>>> here is a new version of two files. use these to replace your >>>>>>>> existing >>>>>>>> copies, and recompile. This should contain all of your current fixes, >>>>>>>> and it should (hopefully) produce proper grayscale scans. >>>>>>>> >>>>>>>> If you can test this also in lineart mode, it might need the same >>>>>>>> width fix as grayscale... >>>>>>>> >>>>>>>> allan >>>>>>>> >>>>>>>> On Tue, Jan 4, 2011 at 4:33 AM, Christophe Largeau (liste) >>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>> >>>>>>>>> Thank you for the information, waiting for your fix. >>>>>>>>> >>>>>>>>> Christophe. >>>>>>>>> >>>>>>>>> Le 03/01/2011 20:03, m. allan noah a ?crit : >>>>>>>>>> >>>>>>>>>> It appears that the corrupt image is because the scanner sends us >>>>>>>>>> 1728 >>>>>>>>>> pixels per line, but we asked for only 1700. Likely this means that >>>>>>>>>> the scanner is limited to image widths which are a multiple of 32 >>>>>>>>>> pixels. I will see if I can come up with a fix. >>>>>>>>>> >>>>>>>>>> allan >>>>>>>>>> >>>>>>>>>> On Mon, Jan 3, 2011 at 12:54 PM, m. allan noah<kitno455 at gmail.com> >>>>>>>>>> wrote: >>>>>>>>>>> >>>>>>>>>>> jpg destroys too much image information. Any chance to can >>>>>>>>>>> compress >>>>>>>>>>> the pnm instead, and send that to me directly? >>>>>>>>>>> >>>>>>>>>>> allan >>>>>>>>>>> >>>>>>>>>>> On Mon, Jan 3, 2011 at 12:11 PM, Christophe Largeau (liste) >>>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>>> >>>>>>>>>>>> OK, >>>>>>>>>>>> >>>>>>>>>>>> my A4 page (basically 0.5 millimeter squares) has been processed >>>>>>>>>>>> >>>>>>>>>>>> you can view the result here >>>>>>>>>>>> http://i37.servimg.com/u/f37/15/57/48/39/test3p10.jpg : not >>>>>>>>>>>> really the >>>>>>>>>>>> expected result ;) >>>>>>>>>>>> >>>>>>>>>>>> You'll find the compressed test3.log attached to this message. >>>>>>>>>>>> >>>>>>>>>>>> Do you need other informations for ssm_df() and ssm_do() >>>>>>>>>>>> debugging ? >>>>>>>>>>>> >>>>>>>>>>>> Christophe. >>>>>>>>>>>> >>>>>>>>>>>> Le 03/01/2011 17:45, m. allan noah a ?crit : >>>>>>>>>>>>> >>>>>>>>>>>>> Ah- same thing, this time also comment out ssm_df(). It would >>>>>>>>>>>>> be nice >>>>>>>>>>>>> to get those two commands working for your machine (if they are >>>>>>>>>>>>> supported by the hardware), but they are not required for proper >>>>>>>>>>>>> functioning. >>>>>>>>>>>>> >>>>>>>>>>>>> allan >>>>>>>>>>>>> >>>>>>>>>>>>> On Mon, Jan 3, 2011 at 11:40 AM, Christophe Largeau (liste) >>>>>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>> Here is the new test2.log ;) >>>>>>>>>>>>>> >>>>>>>>>>>>>> Christophe. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Le 03/01/2011 17:31, m. allan noah a ?crit : >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Excellent. set_window is now accepted by the scanner, but it >>>>>>>>>>>>>>> does >>>>>>>>>>>>>>> not >>>>>>>>>>>>>>> like our ssm_do() call. So, edit canon_dr.c around line 3273, >>>>>>>>>>>>>>> and >>>>>>>>>>>>>>> comment out the call to ssm_do(). Then try again with test2 :) >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> allan >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Mon, Jan 3, 2011 at 11:19 AM, Christophe Largeau (liste) >>>>>>>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Hi, >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> change, recompile and test done. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> The test1pnm file is empty. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> The compressed test1.log is attached to this message. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Christophe. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Le 03/01/2011 16:50, m. allan noah a ?crit : >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> ok- can you make some changes, recompile, and test? >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> canon_dr.c in function set_window, around line 3615 comment >>>>>>>>>>>>>>>>> out >>>>>>>>>>>>>>>>> these >>>>>>>>>>>>>>>>> lines: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> set_WD_brightness (desc1, s->brightness+128); >>>>>>>>>>>>>>>>> set_WD_threshold (desc1, s->threshold); >>>>>>>>>>>>>>>>> set_WD_contrast (desc1, s->contrast+128); >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Then compile, copy the library, and scan again, using this >>>>>>>>>>>>>>>>> command: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage --resolution 200 --mode >>>>>>>>>>>>>>>>> Gray >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> test1pnm 2>test1.log >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Hopefully test1.pnm will contain an image. If not, compress >>>>>>>>>>>>>>>>> the >>>>>>>>>>>>>>>>> log >>>>>>>>>>>>>>>>> and send it to me. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> allan >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Mon, Jan 3, 2011 at 10:11 AM, m. allan >>>>>>>>>>>>>>>>> noah<kitno455 at gmail.com> >>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Yes- I can see some set window data in it, though I am not >>>>>>>>>>>>>>>>>> sure >>>>>>>>>>>>>>>>>> it >>>>>>>>>>>>>>>>>> is >>>>>>>>>>>>>>>>>> complete. This sniffer program seems to miss some of the >>>>>>>>>>>>>>>>>> data. I >>>>>>>>>>>>>>>>>> will >>>>>>>>>>>>>>>>>> look some more today. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> allan >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Mon, Jan 3, 2011 at 8:06 AM, Christophe Largeau (liste) >>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Hi, >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> have you checked the log ? Is it helpful ? >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Christophe. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Le 29/12/2010 17:04, Christophe Largeau (liste) a ?crit : >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Thank you. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Note that I'll be away until next monday. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Christophe. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Le 29/12/2010 17:00, m. allan noah a ?crit : >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Thanks. I'll look at it tonight. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> allan >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 10:07 AM, Christophe Largeau >>>>>>>>>>>>>>>>>>>>> (liste) >>>>>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> the trace.wsl file taken from the snifer is attached >>>>>>>>>>>>>>>>>>>>>> to this >>>>>>>>>>>>>>>>>>>>>> message. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Christophe. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Le 29/12/2010 15:38, m. allan noah a ?crit : >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> the sniffer utility: >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> ftp://ftp.compuware.com/pub/driverstudio/outgoing/utility/wdmsniffer.zip >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> We need to use that to capture traffic of a >>>>>>>>>>>>>>>>>>>>>>> low-resolution >>>>>>>>>>>>>>>>>>>>>>> black >>>>>>>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>>>>>>> white >>>>>>>>>>>>>>>>>>>>>>> scan. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> I cannot give more specific instructions, because I >>>>>>>>>>>>>>>>>>>>>>> rarely >>>>>>>>>>>>>>>>>>>>>>> use >>>>>>>>>>>>>>>>>>>>>>> this >>>>>>>>>>>>>>>>>>>>>>> program. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> allan >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 9:29 AM, Christophe Largeau >>>>>>>>>>>>>>>>>>>>>>> (liste) >>>>>>>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> I will replug the scsi card into the orignal windows >>>>>>>>>>>>>>>>>>>>>>>> machine. >>>>>>>>>>>>>>>>>>>>>>>> Do >>>>>>>>>>>>>>>>>>>>>>>> you have >>>>>>>>>>>>>>>>>>>>>>>> instruction for the log capture on windows ? >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Christophe. >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> Le 29/12/2010 15:22, m. allan noah a ?crit : >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> hmm- it is mad about something we ask it to do in >>>>>>>>>>>>>>>>>>>>>>>>> the set >>>>>>>>>>>>>>>>>>>>>>>>> window >>>>>>>>>>>>>>>>>>>>>>>>> command. I don't have a protocol manual for this >>>>>>>>>>>>>>>>>>>>>>>>> machine, >>>>>>>>>>>>>>>>>>>>>>>>> so >>>>>>>>>>>>>>>>>>>>>>>>> we >>>>>>>>>>>>>>>>>>>>>>>>> have >>>>>>>>>>>>>>>>>>>>>>>>> to guess what the problem is. Or, we have to try and >>>>>>>>>>>>>>>>>>>>>>>>> capture a >>>>>>>>>>>>>>>>>>>>>>>>> log >>>>>>>>>>>>>>>>>>>>>>>>> from Windows driver. Can you use this machine on >>>>>>>>>>>>>>>>>>>>>>>>> windows? >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> allan >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:55 AM, Christophe Largeau >>>>>>>>>>>>>>>>>>>>>>>>> (liste) >>>>>>>>>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> the new dr.log is attached to this message. >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Christophe. >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> Le 29/12/2010 14:46, m. allan noah a ?crit : >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> Sorry, hit 'send' too soon- you should try: >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d >>>>>>>>>>>>>>>>>>>>>>>>>>> canon_dr:/dev/sg2 >>>>>>>>>>>>>>>>>>>>>>>>>>> 2>dr.log>dr.pnm >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> allan >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:35 AM, m. allan >>>>>>>>>>>>>>>>>>>>>>>>>>> noah<kitno455 at gmail.com> >>>>>>>>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> "scanimage: output is not a file, exiting" >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> allan >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:23 AM, Christophe >>>>>>>>>>>>>>>>>>>>>>>>>>>> Largeau >>>>>>>>>>>>>>>>>>>>>>>>>>>> (liste) >>>>>>>>>>>>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi, >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> I'm testing Canon DR-5060-F (SCSI) under Ubuntu >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 10.10 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> ii libsane 1.0.21-2ubuntu2 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> API >>>>>>>>>>>>>>>>>>>>>>>>>>>>> library for scanners >>>>>>>>>>>>>>>>>>>>>>>>>>>>> ii sane-utils 1.0.21-2ubuntu2 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> API >>>>>>>>>>>>>>>>>>>>>>>>>>>>> library for scanners -- utilities >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> The sane-find-scanner commands returns : >>>>>>>>>>>>>>>>>>>>>>>>>>>>> # sane-find-scanner will now attempt to detect >>>>>>>>>>>>>>>>>>>>>>>>>>>>> your >>>>>>>>>>>>>>>>>>>>>>>>>>>>> scanner. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> If the >>>>>>>>>>>>>>>>>>>>>>>>>>>>> # result is different from what you expected, >>>>>>>>>>>>>>>>>>>>>>>>>>>>> first >>>>>>>>>>>>>>>>>>>>>>>>>>>>> make >>>>>>>>>>>>>>>>>>>>>>>>>>>>> sure >>>>>>>>>>>>>>>>>>>>>>>>>>>>> your >>>>>>>>>>>>>>>>>>>>>>>>>>>>> # scanner is powered up and properly connected >>>>>>>>>>>>>>>>>>>>>>>>>>>>> to >>>>>>>>>>>>>>>>>>>>>>>>>>>>> your >>>>>>>>>>>>>>>>>>>>>>>>>>>>> computer. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> found SCSI scanner "CANON DR-5060F 0110" at >>>>>>>>>>>>>>>>>>>>>>>>>>>>> /dev/sg2 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Your SCSI scanner was detected. It may or may >>>>>>>>>>>>>>>>>>>>>>>>>>>>> not >>>>>>>>>>>>>>>>>>>>>>>>>>>>> be >>>>>>>>>>>>>>>>>>>>>>>>>>>>> supported by >>>>>>>>>>>>>>>>>>>>>>>>>>>>> SANE. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Try >>>>>>>>>>>>>>>>>>>>>>>>>>>>> # scanimage -L and read the backend's manpage. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> # No USB scanners found. If you expected >>>>>>>>>>>>>>>>>>>>>>>>>>>>> something >>>>>>>>>>>>>>>>>>>>>>>>>>>>> different, >>>>>>>>>>>>>>>>>>>>>>>>>>>>> make >>>>>>>>>>>>>>>>>>>>>>>>>>>>> sure >>>>>>>>>>>>>>>>>>>>>>>>>>>>> that >>>>>>>>>>>>>>>>>>>>>>>>>>>>> # you have loaded a kernel driver for your USB >>>>>>>>>>>>>>>>>>>>>>>>>>>>> host >>>>>>>>>>>>>>>>>>>>>>>>>>>>> controller >>>>>>>>>>>>>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>>>>>>>>>>>>> have >>>>>>>>>>>>>>>>>>>>>>>>>>>>> setup >>>>>>>>>>>>>>>>>>>>>>>>>>>>> # the USB system correctly. See man sane-usb for >>>>>>>>>>>>>>>>>>>>>>>>>>>>> details. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Not checking for parallel port scanners. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Most Scanners connected to the parallel port >>>>>>>>>>>>>>>>>>>>>>>>>>>>> or >>>>>>>>>>>>>>>>>>>>>>>>>>>>> other >>>>>>>>>>>>>>>>>>>>>>>>>>>>> proprietary >>>>>>>>>>>>>>>>>>>>>>>>>>>>> ports >>>>>>>>>>>>>>>>>>>>>>>>>>>>> # can't be detected by this program. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> when I tried the command "scanimage -L" the >>>>>>>>>>>>>>>>>>>>>>>>>>>>> scanner >>>>>>>>>>>>>>>>>>>>>>>>>>>>> wasn't >>>>>>>>>>>>>>>>>>>>>>>>>>>>> recognized >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> thanks to this message : >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://lists.alioth.debian.org/pipermail/sane-devel/2010-March/026220.html >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> , >>>>>>>>>>>>>>>>>>>>>>>>>>>>> I've added the following lines to canon_dr.c at >>>>>>>>>>>>>>>>>>>>>>>>>>>>> line >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1203. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> else if (strstr (s->model_name,"DR-5060F")){ >>>>>>>>>>>>>>>>>>>>>>>>>>>>> s->can_write_panel = 0; >>>>>>>>>>>>>>>>>>>>>>>>>>>>> } >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Then I replace the compiled versions of >>>>>>>>>>>>>>>>>>>>>>>>>>>>> libsane-canon_dr.la >>>>>>>>>>>>>>>>>>>>>>>>>>>>> and >>>>>>>>>>>>>>>>>>>>>>>>>>>>> libsane-canon_dr.so.1.0.21 in /usr/lib/sane >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Now, the "scanimage -L" command returns : >>>>>>>>>>>>>>>>>>>>>>>>>>>>> device `canon_dr:/dev/sg2' is a CANON DR-5060F >>>>>>>>>>>>>>>>>>>>>>>>>>>>> scanner >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Great, but the scanner doesn't work : >>>>>>>>>>>>>>>>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d >>>>>>>>>>>>>>>>>>>>>>>>>>>>> canon_dr:/dev/sg2 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [sanei_debug] Setting debug level of canon_dr >>>>>>>>>>>>>>>>>>>>>>>>>>>>> to 30. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: start >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: canon_dr backend 1.0.35, >>>>>>>>>>>>>>>>>>>>>>>>>>>>> from >>>>>>>>>>>>>>>>>>>>>>>>>>>>> sane-backends >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1.0.21 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: finish >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: start >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: no scanners currently >>>>>>>>>>>>>>>>>>>>>>>>>>>>> attached, >>>>>>>>>>>>>>>>>>>>>>>>>>>>> attaching >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: start >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: reading config file >>>>>>>>>>>>>>>>>>>>>>>>>>>>> canon_dr.conf >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: looking for 'scsi >>>>>>>>>>>>>>>>>>>>>>>>>>>>> CANON >>>>>>>>>>>>>>>>>>>>>>>>>>>>> DR' >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: start >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: looking for '/dev/sg2' >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: start >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: cannot get requested >>>>>>>>>>>>>>>>>>>>>>>>>>>>> buffer >>>>>>>>>>>>>>>>>>>>>>>>>>>>> size >>>>>>>>>>>>>>>>>>>>>>>>>>>>> (2097152/524288) >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: start >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> ...... >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: finish >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: finish >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: start >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 12 00 00 00 30 00 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> ....0. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: reading 48 bytes >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in:<< >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 06 00 02 02 1f 00 00 10 43 41 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 4e 4f >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 4e >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........CANON >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 010: 44 52 2d 35 30 36 30 46 20 20 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20 20 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> DR-5060F >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 020: 30 31 31 30 32 30 30 31 30 36 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 30 37 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 011020010607 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: read 48 bytes >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: Found CANON scanner >>>>>>>>>>>>>>>>>>>>>>>>>>>>> DR-5060F >>>>>>>>>>>>>>>>>>>>>>>>>>>>> version >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0110 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> at >>>>>>>>>>>>>>>>>>>>>>>>>>>>> /dev/sg2 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: finish >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: start >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 12 01 f0 00 1e 00 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> ...... >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: reading 30 bytes >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in:<< >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 06 f0 02 00 23 01 2c 01 2c a5 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 01 2c >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 01 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2c >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 00 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> c8 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> ....#.,.,..,.,.. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 010: 00 64 01 c0 00 00 0d a0 00 00 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 13 ee >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0e >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 00 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> .d............ >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: read 30 bytes >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: length=23 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] standard options >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] basic x res: 300 dpi >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] basic y res: 300 dpi >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] step x res: 1 dpi >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] step y res: 0 dpi >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max x res: 300 dpi >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max y res: 300 dpi >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] min x res: 200 dpi >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] min y res: 100 dpi >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 60 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 75 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 100 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 120 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 150 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 160 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 180 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 200 dpi: 1 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 240 dpi: 1 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 300 dpi: 1 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 320 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 400 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 480 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 600 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 800 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 1200 dpi: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max width: 13952 (11.63 in) >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max length: 20408 (17.01 in) >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] AWD: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] CE Emphasis: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] C Emphasis: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] High quality: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] grayscale: 1 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] halftone: 1 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] monochrome: 1 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] overflow: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: finish >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_model: start >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_model: finish >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_panel: start >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] read_panel: start >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] read_panel: finish 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] send_panel: start >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] send_panel: unsupported, finishing >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_panel: finish >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_user: start >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_user: finish >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_options: start >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_options: finish >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnecting scsi device >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: finish >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: found scanner >>>>>>>>>>>>>>>>>>>>>>>>>>>>> /dev/sg2 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: found 1 scanner(s) >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: finish >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 requested >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 found >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: start >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: start >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> ...... >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: finish >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: finish >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: finish >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for >>>>>>>>>>>>>>>>>>>>>>>>>>>>> '' (0) >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for >>>>>>>>>>>>>>>>>>>>>>>>>>>>> '' (0) >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 1 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 2 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 3 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 4 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 5 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 6 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 7 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 10 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 11 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 12 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 13 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 14 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 15 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 16 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 17 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 18 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 19 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 20 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 21 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 22 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 23 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 24 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 25 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 26 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 27 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 28 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 29 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 30 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 31 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 32 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 33 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 34 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 35 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 36 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 37 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 38 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'br-x' >>>>>>>>>>>>>>>>>>>>>>>>>>>>> (8) >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-x' >>>>>>>>>>>>>>>>>>>>>>>>>>>>> (6) >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'br-y' >>>>>>>>>>>>>>>>>>>>>>>>>>>>> (9) >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-y' >>>>>>>>>>>>>>>>>>>>>>>>>>>>> (7) >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-x' >>>>>>>>>>>>>>>>>>>>>>>>>>>>> (6) >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'br-x' >>>>>>>>>>>>>>>>>>>>>>>>>>>>> (8) >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-y' >>>>>>>>>>>>>>>>>>>>>>>>>>>>> (7) >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9 >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for >>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'br-y' >>>>>>>>>>>>>>>>>>>>>>>>>>>>> (9) >>>>>>>>>>>>>>>>>>>>>>>>>>>>> scanimage: output is not a file, exiting >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_close: start >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnecting scsi device >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] image_buffers: start >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] image_buffers: finish >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] offset_buffers: start >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] offset_buffers: finish >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] gain_buffers: start >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] gain_buffers: finish >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_close: finish >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_exit: start >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish >>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_exit: finish >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Any idea ? >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Christophe. >>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Christophe Largeau >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Alixen >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>> sane-devel mailing list: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> sane-devel at lists.alioth.debian.org >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>> Unsubscribe: Send mail with subject "unsubscribe >>>>>>>>>>>>>>>>>>>>>>>>>>>>> your_password" >>>>>>>>>>>>>>>>>>>>>>>>>>>>> to sane-devel-request at lists.alioth.debian.org >>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>>>> "The truth is an offense, but not a sin" >>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>>>> Christophe Largeau >>>>>>>>>>>>>>>>>>>>>>>>>> Alixen >>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>>> Christophe Largeau >>>>>>>>>>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>>>>>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>> Christophe Largeau >>>>>>>>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>>>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>> Christophe Largeau >>>>>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>> "The truth is an offense, but not a sin" >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>> Christophe Largeau >>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>>>>> Christophe Largeau >>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> Christophe Largeau >>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> "The truth is an offense, but not a sin" >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> Christophe Largeau >>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> Christophe Largeau >>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>> >>>> -- >>>> Christophe Largeau >>>> Alixen 20 rue Jean Rostand 91 400 Orsay >>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >>>> >>> >>> >>> >> >> >> -- >> Christophe Largeau >> Alixen 20 rue Jean Rostand 91 400 Orsay >> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54 >> > > > -- Christophe Largeau Alixen 20 rue Jean Rostand 91 400 Orsay Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
