|
Hi all, as suggested by pavlushka on irc, I am posting my problem to this list. I am using a Xerox Workcentre 3220 MFP. I have the issue that the scanning area is broken for all resolutions >150dpi. To be exact, only resolution 150 and 1200 works. When using 300dpi, for example, about 20% of the page is cut at the top. It looks like the page is shifted up. The same amount (of course) then stays white at the bottom of the page. I am using git snapshot ppa: scanimage (sane-backends) 1.0.26git; backend version 1.0.26 OS: Kubuntu trusty. Scanner details (output from "scanimage -A -d "xerox_mfp:tcp print1"): All options specific to device `xerox_mfp:tcp print1': Standard: --resolution 75|100|150|200|300|600|1200dpi [150] Sets the resolution of the scanned image. --mode Lineart|Halftone|Gray|Color [Color] Selects the scan mode (e.g., lineart, monochrome, or color). --highlight 30..70% (in steps of 10) [inactive] Select minimum-brightness to get a white point --source Flatbed|ADF|Auto [Flatbed] Selects the scan source (such as a document-feeder). Geometry: -l 0..215.9mm (in steps of 1) [0] Top-left x position of scan area. -t 0..297.18mm (in steps of 1) [0] Top-left y position of scan area. -x 0..215.9mm (in steps of 1) [215.9] Width of scan-area. -y 0..297.18mm (in steps of 1) [297.18] Height of scan-area Regarding the support page the support for Workcentre 3220 should be "good". Though, not being able to use 200 and 300dpi is not so good ;-) Any idea how to get around this issue? Any customizable parameters? Thanks a lot for any help! Cheers, Matt |
-- sane-devel mailing list: [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel Unsubscribe: Send mail with subject "unsubscribe your_password" to [email protected]
