Hi,
Another new user here. I'm on linux 64 so take my advice with a grain of
salt but I would start by reducing the .liq down to almost nothing (i.e.
get rid of the crossfade) turn up logging ( set("log.level",4) ) and then
work on eliminating all log errors. So for the "Unknown protocol "'C" in
URI "'C:/Charts - Dance Girl.mp3'"!" error, try as a single instead of a
playlist ( intro = single("C:/Charts - Dance Girl.mp3") ) And try it these
ways too:
C:\Charts - Dance Girl.mp3 (turn slash around)
\Charts - Dance Girl.mp3 (get rid of C:)
Charts - Dance Girl.mp3 (put song in same path as .liq)
Hopefully, once you've gotten rid of all the errors, it will play.
Or pray for a response from one of the LS devs. But pray hard. :)
s
On Fri, Dec 1, 2017 at 1:40 AM, Joe Panarello <[email protected]>
wrote:
> Hi Nick;
>
> Thanks for the reply. It was my typo in the email the actual file name was
> “test.liq” I wish it was that simple.
>
> Here is what I have found so far.
>
> The manual states;
>
> liquidsoap ’out(playlist("playlist.pls"))’
>
> *This does not work on windows.*
>
>
>
> *BUT this does seem to work??? I have wget installed on this machine and a
> sound card. But it does not play.??*
>
> Microsoft Windows [Version 6.1.7601]
>
> Copyright (c) 2009 Microsoft Corporation. All rights reserved.
>
>
>
> C:\Program Files\Savonet\Liquidsoap>liquidsoap out(playlist('test.pls'))
>
> 2017/11/30 19:32:58 >>> LOG START
>
> 2017/11/30 19:32:58 [protocols.external:3] Didn't find "wget".
>
> 2017/11/30 19:32:58 [main:3] Liquidsoap 1.1.1+scm ([email protected]:
> savonet/liquid
>
> soap.git@dfbb7bb3556e8d615cc5692001778878e0fbf454:20140128:055946)
>
> 2017/11/30 19:32:58 [main:3] Using: pcre=7.0.4 dtools=0.3.1 duppy=0.5.1
> cry=0.2.
>
> 2 mm=0.2.1 xmlplaylist=0.1.3 lastfm=0.3.0 ogg=0.4.5 vorbis=0.6.1
> opus=0.1.0 spee
>
> x=0.2.0 mad=0.4.4 flac=0.1.1 flac.ogg=0.1.1 dynlink=[distributed with
> Ocaml] lam
>
> e=0.3.2 shine=0.1.1 fdkaac=0.2.0 theora=0.3.0 schroedinger=0.1.0
> gavl=0.1.5 ao=0
>
> .2.0 samplerate=0.1.2 taglib=0.3.1 camomile=0.8.4 faad=0.3.2
> portaudio=0.2.0 lad
>
> spa=0.1.4 yojson=1.1.8 winsvc=0.0.1
>
> 2017/11/30 19:32:58 [main:2]
>
> 2017/11/30 19:32:58 [main:2] DISCLAIMER: This version of Liquidsoap has
> been
>
> 2017/11/30 19:32:58 [main:2] compiled from a snapshot of the development
> code.
>
> 2017/11/30 19:32:58 [main:2] As such, it should not be used in production
>
> 2017/11/30 19:32:58 [main:2] unless you know what you are doing!
>
> 2017/11/30 19:32:58 [main:2]
>
> 2017/11/30 19:32:58 [main:2] We are, however, very interested in any
> feedback
>
> 2017/11/30 19:32:58 [main:2] about our development code and committed to
> fix
>
> 2017/11/30 19:32:58 [main:2] issues as soon as possible.
>
> 2017/11/30 19:32:58 [main:2]
>
> 2017/11/30 19:32:58 [main:2] If you are interested in collaborating to
>
> 2017/11/30 19:32:58 [main:2] the development of Liquidsoap, feel free to
>
> 2017/11/30 19:32:58 [main:2] drop us a mail at <[email protected]>
>
> 2017/11/30 19:32:58 [main:2] or to join the #savonet IRC channel on
> Freenode.
>
> 2017/11/30 19:32:58 [main:2]
>
> 2017/11/30 19:32:58 [main:2] Please send any bug report or feature request
>
> 2017/11/30 19:32:58 [main:2] at <https://github.com/savonet/
> liquidsoap/issues>.
>
> 2017/11/30 19:32:58 [main:2]
>
> 2017/11/30 19:32:58 [main:2] We hope you enjoy this snapshot build of
> Liquidsoap
>
> !
>
> 2017/11/30 19:32:58 [main:2]
>
> 2017/11/30 19:32:58 [frame:3] Using 44100Hz audio, 25Hz video, 44100Hz
> master.
>
> 2017/11/30 19:32:58 [frame:3] Frame size must be a multiple of 1764 ticks
> = 1764
>
> audio samples = 1 video samples.
>
> 2017/11/30 19:32:58 [frame:3] Targetting 'frame.duration': 0.04s = 1764
> audio sa
>
> mples = 1764 ticks.
>
> 2017/11/30 19:32:58 [frame:3] Frames last 0.04s = 1764 audio samples = 1
> video s
>
> amples = 1764 ticks.
>
> 2017/11/30 19:32:59 [threads:3] Created thread "generic queue #1".
>
> 2017/11/30 19:32:59 [threads:3] Created thread "generic queue #2".
>
> 2017/11/30 19:32:59 [test(dot)pls:3] Loading playlist...
>
> 2017/11/30 19:32:59 [test(dot)pls:3] No mime type specified, trying
> autodetectio
>
> n.
>
> 2017/11/30 19:32:59 [test(dot)pls:3] Playlist treated as format
> application/x-mp
>
> egURL
>
> 2017/11/30 19:32:59 [test(dot)pls:3] Successfully loaded a playlist of 2
> tracks.
>
>
>
> 2017/11/30 19:32:59 [threads:3] Created thread "wallclock_pa" (1 total).
>
> 2017/11/30 19:32:59 [clock.wallclock_pa:3] Streaming loop starts,
> synchronized b
>
> y active sources.
>
> 2017/11/30 19:32:59 [request:3] Unknown protocol "'C" in URI "'C:/Halos -
> Crazy
>
> Bells.mp3'"!
>
> 2017/11/30 19:32:59 [mksafe:3] Switch to safe_blank.
>
> 2017/11/30 19:32:59 [request:3] Unknown protocol "'C" in URI "'C:/Charts -
> Dance
>
> Girl.mp3'"!
>
> 2017/11/30 19:32:59 [request:3] Unknown protocol "'C" in URI "'C:/Halos -
> Crazy
>
> Bells.mp3'"!
>
> 2017/11/30 19:32:59 [request:3] Unknown protocol "'C" in URI "'C:/Charts -
> Dance
>
> Girl.mp3'"!
>
> 2017/11/30 19:33:01 [request:3] Unknown protocol "'C" in URI "'C:/Halos -
> Crazy
>
> Bells.mp3'"!
>
> 2017/11/30 19:33:47 [main:3] Shutdown started!
>
> 2017/11/30 19:33:47 [main:3] Waiting for threads to terminate...
>
> 2017/11/30 19:33:47 [clock.wallclock_pa:3] Streaming loop stopped.
>
> 2017/11/30 19:33:47 [threads:3] Thread "wallclock_pa" terminated (0
> remaining).
>
> 2017/11/30 19:33:47 [main:3] Cleaning downloaded files...
>
> 2017/11/30 19:33:47 [main:3] Freeing memory...
>
> 2017/11/30 19:33:47 >>> LOG END
>
>
>
> C:\Program Files\Savonet\Liquidsoap>
>
>
>
>
>
> *From:* Nicholas Vrtis [mailto:[email protected]]
> *Sent:* Thursday, November 30, 2017 6:16 PM
> *To:* [email protected]
> *Subject:* Re: [Savonet-users] Problem with Using Liquid Soap on Win32
>
>
>
> Joe,
>
>
>
> Not sure which is the typo, but your command line say test.lig and your
> note says it is test.liq
>
>
>
> (note the difference between the 'G', and the 'Q'...
>
>
>
> Could it be that it's just trying to tell you that it can't find the file?
>
>
>
> Nick
>
>
>
> On Sun, Nov 26, 2017 at 3:43 PM, Joe Panarello <[email protected]>
> wrote:
>
> Hello;
>
> I have been working on trying to get Liquid Soap to run on a Windows 7 Pro
> OS for the last 2 days.
>
> Build From: https://codeload.github.com/savonet/liquidsoapwin32/zip/
> 1c6abf050bb2736b54b9e083e1b0f906371adfa8
>
>
>
> When I try to run from a command line I get this!
>
>
>
> *C:\Program Files\Savonet\Liquidsoap>Liquidsoap.exe .\test.lig*
>
> *Line 1, char 2: Empty token!*
>
>
>
> Here is test.liq:
>
> set("log.stdout",true)
>
> set("log.file",false)
>
>
>
> # Examples
>
>
>
> # A playlist source with a smart crossfade
>
> s = smart_crossfade(playlist("C:\Program Files\Savonet\Liquidsoap\test.
> pls"))
>
> #s = smart_crossfade(playlist("C:\Documents and
> Settings\toots\Desktop\mp3"))
>
>
>
> # A HTTP input
>
> #s = input.http("http://flows.liquidsoap.fm/radio/
> 01dbfc6d2f3e50d6ba243e68c1ca469b44babd1f/mp3/128k")
>
>
>
> # An output to the local soundcard
>
> output.ao(fallible=true,s)
>
>
>
> # An output to a local file, encoding
>
> # in ogg/vorbis+ogg/theora
>
> #output.file(%ogg(%theora,%vorbis),
>
> # fallible=true,
>
> # "z:\tmp\output.ogv",
>
> # s)
>
>
>
> # An icecast output in AAC+ format
>
> #output.icecast(%aacplus(bitrate=32),
>
> # fallible=true,
>
> # mount="test",
>
> # s)
>
>
>
> Any help would be GREATLY appreciated.
>
> Best
>
> Joe Panarello
>
>
>
>
>
>
>
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Savonet-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/savonet-users
>
>
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Savonet-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/savonet-users
>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Savonet-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/savonet-users
