Pascal Georges wrote:
Hi!
> We had the feeling that the mac might not like serial
> IO without _any_ flow control as it is used by DGT.
> Ie. dgtdrv2 starts up, searches for the board and
> hangs there right after the first char send to the
> serial port even in the init routines of dgtnix.
>
> This looks very much like a flow control problem. Did you
> try to link pin 7 and 8 (CTS and RTS) if you use a RS232
> cable ?
Well, we have here the classical hen and egg problem. I've a
board but no Mac, the only people I know that have a Mac do
not have a board (as there is no support for Mac yet I can
understand that...) I still hope that by sheer incoincidence
I may have some day my board and a Mac together at the same
place.
--
Kind regards, / War is Peace.
| Freedom is Slavery.
Alexander Wagner | Ignorance is Strength.
|
| Theory : G. Orwell, "1984"
/ In practice: USA, since 2001
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Scid-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/scid-users
