Op maandag 20-02-2012 om 18:54 uur [tijdzone +0100], schreef Christian Gmeiner: > 2012/2/20 Christian Gmeiner <[email protected]>: > > 2012/2/20 Christian Gmeiner <[email protected]>: > >> 2012/2/20 Kevin O'Connor <[email protected]>: > >>> On Mon, Feb 20, 2012 at 02:39:27PM +0100, Christian Gmeiner wrote: > >>>> Hi all, > >>>> > >>>> I am trying my luck with coreboot and seabios to get VGA working on an > >>>> LX800 > >>>> platform. At the moment I am not sure what options I need to enable in > >>>> coreboot > >>>> and seabios to enable VGA. > >>> > >>> Nils recently reported success using the SeaVGABIOS on his Geode GX2 > >>> based machine. I don't think anyone has tried recently on the Geode > >>> LX. > >>> > >>>> Coreboot does its jobs and starts SeaBIOS, but VGA seems not to work. > >>>> > >>>> thanks for every hint > >>> > >>> Please send the coreboot plus seabios log (with debugging set to 8) to > >>> the mail list. > >> > >> Here it is http://nopaste.info/10545252c4.html > >> > > > > After some tipps on irc I get this results: > > http://nopaste.info/f22222d6d8.html
It is not clear to me if you get some text on your screen now that vga bios loading is working. For your boot problem you could try enabling CONFIG_ATA_DMA if i remember correct it doesn't boot without it on my target also.( i always set it) Greetings, Nils. _______________________________________________ SeaBIOS mailing list [email protected] http://www.seabios.org/mailman/listinfo/seabios
