ping -- Christian Gmeiner, MSc
Am 21. Februar 2012 09:17 schrieb Christian Gmeiner <[email protected]>: > 2012/2/21 Nils <[email protected]>: >> Op maandag 20-02-2012 om 18:54 uur [tijdzone +0100], schreef Christian >> Gmeiner: >>> 2012/2/20 Christian Gmeiner <[email protected]>: >>> > 2012/2/20 Christian Gmeiner <[email protected]>: >>> >> 2012/2/20 Kevin O'Connor <[email protected]>: >>> >>> On Mon, Feb 20, 2012 at 02:39:27PM +0100, Christian Gmeiner wrote: >>> >>>> Hi all, >>> >>>> >>> >>>> I am trying my luck with coreboot and seabios to get VGA working on an >>> >>>> LX800 >>> >>>> platform. At the moment I am not sure what options I need to enable in >>> >>>> coreboot >>> >>>> and seabios to enable VGA. >>> >>> >>> >>> Nils recently reported success using the SeaVGABIOS on his Geode GX2 >>> >>> based machine. I don't think anyone has tried recently on the Geode >>> >>> LX. >>> >>> >>> >>>> Coreboot does its jobs and starts SeaBIOS, but VGA seems not to work. >>> >>>> >>> >>>> thanks for every hint >>> >>> >>> >>> Please send the coreboot plus seabios log (with debugging set to 8) to >>> >>> the mail list. >>> >> >>> >> Here it is http://nopaste.info/10545252c4.html >>> >> >>> > >>> > After some tipps on irc I get this results: >>> > http://nopaste.info/f22222d6d8.html >> >> It is not clear to me if you get some text on your screen now that vga >> bios loading is working. > > It does not work.. any hints how to debug it. I can say, that linux lxfb > works. > >> >> For your boot problem you could try enabling CONFIG_ATA_DMA if i >> remember correct it doesn't boot without it on my target also.( i always >> set it) > > On some of your devices UDMA is broken due some wrong schematics. So I > enabled PIO32 > > Greets > -- > Christian Gmeiner, MSc _______________________________________________ SeaBIOS mailing list [email protected] http://www.seabios.org/mailman/listinfo/seabios
