2012/2/21 Nils <[email protected]>: > Op maandag 20-02-2012 om 18:54 uur [tijdzone +0100], schreef Christian > Gmeiner: >> 2012/2/20 Christian Gmeiner <[email protected]>: >> > 2012/2/20 Christian Gmeiner <[email protected]>: >> >> 2012/2/20 Kevin O'Connor <[email protected]>: >> >>> On Mon, Feb 20, 2012 at 02:39:27PM +0100, Christian Gmeiner wrote: >> >>>> Hi all, >> >>>> >> >>>> I am trying my luck with coreboot and seabios to get VGA working on an >> >>>> LX800 >> >>>> platform. At the moment I am not sure what options I need to enable in >> >>>> coreboot >> >>>> and seabios to enable VGA. >> >>> >> >>> Nils recently reported success using the SeaVGABIOS on his Geode GX2 >> >>> based machine. I don't think anyone has tried recently on the Geode >> >>> LX. >> >>> >> >>>> Coreboot does its jobs and starts SeaBIOS, but VGA seems not to work. >> >>>> >> >>>> thanks for every hint >> >>> >> >>> Please send the coreboot plus seabios log (with debugging set to 8) to >> >>> the mail list. >> >> >> >> Here it is http://nopaste.info/10545252c4.html >> >> >> > >> > After some tipps on irc I get this results: >> > http://nopaste.info/f22222d6d8.html > > It is not clear to me if you get some text on your screen now that vga > bios loading is working.
It does not work.. any hints how to debug it. I can say, that linux lxfb works. > > For your boot problem you could try enabling CONFIG_ATA_DMA if i > remember correct it doesn't boot without it on my target also.( i always > set it) On some of your devices UDMA is broken due some wrong schematics. So I enabled PIO32 Greets -- Christian Gmeiner, MSc _______________________________________________ SeaBIOS mailing list [email protected] http://www.seabios.org/mailman/listinfo/seabios
