Re: [Elecraft] K3s WSJT-x V2.1.2 no vox

2019-12-03 Thread Bob McGraw K4TAX 
Glad to share what I've learned. Thank you. 

73
Bob, K4TAX


Sent from my iPhone

> On Dec 3, 2019, at 11:00 AM, David Thompson  wrote:
> 
> 
>> On Dec 3, 2019, at 07:20, Bob McGraw K4TAX  wrote:
>> 
>> If the WSJT Tune frequency is 1500 Hz, there is a beating between 1500 and 
>> the refresh rate of the ALC displayed value. Simply move the TX audio 
>> frequency up or down to eliminate this.  Makes for MUCH easier adjustment of 
>> audio levels. 
> 
> 
> Bob,
> 
> I’m filing this away for safe keeping! That’s a bit of a gem in my book.
> 
> Thanks and 73 de AG7TX...
> 
> David Thompson, AG7TX
> Jack of All Trades
> Master of None
> dbthomp...@me.com
> 
> 
> 
> 


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3s WSJT-x V2.1.2 no vox

2019-12-03 Thread David Thompson via Elecraft 

> On Dec 3, 2019, at 07:20, Bob McGraw K4TAX  wrote:
> 
> If the WSJT Tune frequency is 1500 Hz, there is a beating between 1500 and 
> the refresh rate of the ALC displayed value. Simply move the TX audio 
> frequency up or down to eliminate this.  Makes for MUCH easier adjustment of 
> audio levels. 


Bob,

I’m filing this away for safe keeping! That’s a bit of a gem in my book.

Thanks and 73 de AG7TX...

David Thompson, AG7TX
Jack of All Trades
Master of None
dbthomp...@me.com



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3s WSJT-x V2.1.2 no vox

2019-12-03 Thread Bob McGraw K4TAX 
There were known changes in the version up to resolve a bug in a previous 
version. 

If the WSJT Tune frequency is 1500 Hz, there is a beating between 1500 and the 
refresh rate of the ALC displayed value. Simply move the TX audio frequency up 
or down to eliminate this.  Makes for MUCH easier adjustment of audio levels. 

73
Bob, K4TAX


Sent from my iPhone

> On Dec 3, 2019, at 9:41 AM, cx...@4email.net wrote:
> 
> Hola Bob and Jim,
> 
> I checked all settings, I had not clicked on "Tune".
> Computer sound settings were all good. Mic and spkr USB both on Audio codex.
> Changed from Vox to CAT as per Bob's advice.
> 
> Still nothing until I changed the 'power slider' in WSJT-x to 100% vs
> 50. Then got 8 barschanged to about 70% and got five bars with fifth
> flickering, although sometimes all five would momentarily blink off for
> less than one sec, then come back.
> 
> Also discovered that had to make adjustments to power slider in software
> whenever I changed bands. K3s Mic gain set at 39,up from original 30 to
> get proper ALC.
> 
> Strange, all of this due to update to v 2.1.2.
> 
> Tnx for all the suggestions, at least back in operation.
> 
> 73
> Tom
> HP1XT
> 
>> On 2/12/2019 2:24 PM, Jim Rhodes wrote:
>> And make sure that your operating system has not changed your sound
>> device settings. Win 10 is bad about that (ask me how I know!)
>> 
>> On Mon, Dec 2, 2019 at 12:24 PM Bob McGraw K4TAX > > wrote:
>> 
>>Add to my earlier.  You may need to adjust levels as previous
>>version and this one will be different.
>> 
>>Also suggest you use CAT control and not VOX as CAT is not affected
>>by audio levels.
>> 
>>73
>>Bob, K4TAX
>> 
>> 
>>Sent from my iPhone
>> 
>>> On Dec 2, 2019, at 11:23 AM, cx...@4email.net
>> wrote:
>>> 
>>> Hola,
>>> 
>>> Problem with keying the VOX on the K3s with new install. Select
>>"Tune",
>>> it turns red but xmtr does not key VOX.
>>> 
>>> Never had this problem with v 2.0.0. Double checked USB audio
>>codex for
>>> both speaker and microphone. Parameters checked for Radio tab, K3s,
>>> using usb from KIO3 to computer, com4 (doublechecked Device
>>manager for
>>> correct port), VOX tab checked, 38400 and 8-1-none for
>>Data/stop/handshake.
>>> 
>>> Line in selected at 30 on K3s along with Vox gain at 30 (same as
>>> before). K3s mode selected for TX data and Data A menu selected.
>>> Received and decode FT8 no problem, still no xmit with VOX.
>>> 
>>> Do not see where I can go back to v2.0.0 as it no longer appears on
>>> WSJT-x website.
>>> 
>>> Suggestions?
>>> 73
>>> Tom
>>> HP1XT
>>> 
>> 
> 


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3s WSJT-x V2.1.2 no vox

2019-12-03 Thread cx7tt 
Hola Bob and Jim,

I checked all settings, I had not clicked on "Tune".
Computer sound settings were all good. Mic and spkr USB both on Audio codex.
Changed from Vox to CAT as per Bob's advice.

Still nothing until I changed the 'power slider' in WSJT-x to 100% vs
50. Then got 8 barschanged to about 70% and got five bars with fifth
flickering, although sometimes all five would momentarily blink off for
less than one sec, then come back.

Also discovered that had to make adjustments to power slider in software
whenever I changed bands. K3s Mic gain set at 39,up from original 30 to
get proper ALC.

Strange, all of this due to update to v 2.1.2.

Tnx for all the suggestions, at least back in operation.

73
Tom
HP1XT

On 2/12/2019 2:24 PM, Jim Rhodes wrote:
> And make sure that your operating system has not changed your sound
> device settings. Win 10 is bad about that (ask me how I know!)
> 
> On Mon, Dec 2, 2019 at 12:24 PM Bob McGraw K4TAX  > wrote:
> 
> Add to my earlier.  You may need to adjust levels as previous
> version and this one will be different.
> 
> Also suggest you use CAT control and not VOX as CAT is not affected
> by audio levels.
> 
> 73
> Bob, K4TAX
> 
> 
> Sent from my iPhone
> 
> > On Dec 2, 2019, at 11:23 AM, cx...@4email.net
>  wrote:
> >
> > Hola,
> >
> > Problem with keying the VOX on the K3s with new install. Select
> "Tune",
> > it turns red but xmtr does not key VOX.
> >
> > Never had this problem with v 2.0.0. Double checked USB audio
> codex for
> > both speaker and microphone. Parameters checked for Radio tab, K3s,
> > using usb from KIO3 to computer, com4 (doublechecked Device
> manager for
> > correct port), VOX tab checked, 38400 and 8-1-none for
> Data/stop/handshake.
> >
> > Line in selected at 30 on K3s along with Vox gain at 30 (same as
> > before). K3s mode selected for TX data and Data A menu selected.
> > Received and decode FT8 no problem, still no xmit with VOX.
> >
> > Do not see where I can go back to v2.0.0 as it no longer appears on
> > WSJT-x website.
> >
> > Suggestions?
> > 73
> > Tom
> > HP1XT
> >
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3s WSJT-x V2.1.2 no vox

2019-12-02 Thread Bob McGraw K4TAX 
As I recall in the current version or maybe it was the previous version, there 
was a change which affects the way it handles TX audio level.   I wouldn't at 
all be surprised that update a version does changes audio level.   I believe it 
is a bug fix to prevent audio distortion due to excessive gain and thus 
distortion in the computer.   

I don't use VOX for  transmit but prefer CAT for transmit as it is not affected 
by audio level or VOX hang time. 

73
Bob, K4TAX


Sent from my iPhone

> On Dec 2, 2019, at 2:24 PM, Jim Rhodes  wrote:
> 
> And make sure that your operating system has not changed your sound device 
> settings. Win 10 is bad about that (ask me how I know!)
> 
>> On Mon, Dec 2, 2019 at 12:24 PM Bob McGraw K4TAX  wrote:
>> Add to my earlier.  You may need to adjust levels as previous version and 
>> this one will be different. 
>> 
>> Also suggest you use CAT control and not VOX as CAT is not affected by audio 
>> levels. 
>> 
>> 73
>> Bob, K4TAX
>> 
>> 
>> Sent from my iPhone
>> 
>> > On Dec 2, 2019, at 11:23 AM, cx...@4email.net wrote:
>> > 
>> > Hola,
>> > 
>> > Problem with keying the VOX on the K3s with new install. Select "Tune",
>> > it turns red but xmtr does not key VOX.
>> > 
>> > Never had this problem with v 2.0.0. Double checked USB audio codex for
>> > both speaker and microphone. Parameters checked for Radio tab, K3s,
>> > using usb from KIO3 to computer, com4 (doublechecked Device manager for
>> > correct port), VOX tab checked, 38400 and 8-1-none for Data/stop/handshake.
>> > 
>> > Line in selected at 30 on K3s along with Vox gain at 30 (same as
>> > before). K3s mode selected for TX data and Data A menu selected.
>> > Received and decode FT8 no problem, still no xmit with VOX.
>> > 
>> > Do not see where I can go back to v2.0.0 as it no longer appears on
>> > WSJT-x website.
>> > 
>> > Suggestions?
>> > 73
>> > Tom
>> > HP1XT
>> > 
>> > __
>> > Elecraft mailing list
>> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> > Help: http://mailman.qth.net/mmfaq.htm
>> > Post: mailto:Elecraft@mailman.qth.net
>> > 
>> > This list hosted by: http://www.qsl.net
>> > Please help support this email list: http://www.qsl.net/donate.html
>> > Message delivered to rmcg...@blomand.net 
>> 
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to jimk...@gmail.com 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3s WSJT-x V2.1.2 no vox

2019-12-02 Thread Jim Rhodes 
And make sure that your operating system has not changed your sound device
settings. Win 10 is bad about that (ask me how I know!)

On Mon, Dec 2, 2019 at 12:24 PM Bob McGraw K4TAX 
wrote:

> Add to my earlier.  You may need to adjust levels as previous version and
> this one will be different.
>
> Also suggest you use CAT control and not VOX as CAT is not affected by
> audio levels.
>
> 73
> Bob, K4TAX
>
>
> Sent from my iPhone
>
> > On Dec 2, 2019, at 11:23 AM, cx...@4email.net wrote:
> >
> > Hola,
> >
> > Problem with keying the VOX on the K3s with new install. Select "Tune",
> > it turns red but xmtr does not key VOX.
> >
> > Never had this problem with v 2.0.0. Double checked USB audio codex for
> > both speaker and microphone. Parameters checked for Radio tab, K3s,
> > using usb from KIO3 to computer, com4 (doublechecked Device manager for
> > correct port), VOX tab checked, 38400 and 8-1-none for
> Data/stop/handshake.
> >
> > Line in selected at 30 on K3s along with Vox gain at 30 (same as
> > before). K3s mode selected for TX data and Data A menu selected.
> > Received and decode FT8 no problem, still no xmit with VOX.
> >
> > Do not see where I can go back to v2.0.0 as it no longer appears on
> > WSJT-x website.
> >
> > Suggestions?
> > 73
> > Tom
> > HP1XT
> >
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to rmcg...@blomand.net
>
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jimk...@gmail.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3s WSJT-x V2.1.2 no vox

2019-12-02 Thread Bob McGraw K4TAX 
Add to my earlier.  You may need to adjust levels as previous version and this 
one will be different. 

Also suggest you use CAT control and not VOX as CAT is not affected by audio 
levels. 

73
Bob, K4TAX


Sent from my iPhone

> On Dec 2, 2019, at 11:23 AM, cx...@4email.net wrote:
> 
> Hola,
> 
> Problem with keying the VOX on the K3s with new install. Select "Tune",
> it turns red but xmtr does not key VOX.
> 
> Never had this problem with v 2.0.0. Double checked USB audio codex for
> both speaker and microphone. Parameters checked for Radio tab, K3s,
> using usb from KIO3 to computer, com4 (doublechecked Device manager for
> correct port), VOX tab checked, 38400 and 8-1-none for Data/stop/handshake.
> 
> Line in selected at 30 on K3s along with Vox gain at 30 (same as
> before). K3s mode selected for TX data and Data A menu selected.
> Received and decode FT8 no problem, still no xmit with VOX.
> 
> Do not see where I can go back to v2.0.0 as it no longer appears on
> WSJT-x website.
> 
> Suggestions?
> 73
> Tom
> HP1XT
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcg...@blomand.net 


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3s WSJT-x V2.1.2 no vox

2019-12-02 Thread Bob McGraw K4TAX 
Check SPKR level on the computer.  Also check PWR slider on WSJT-X.  

Check Audio tab on WSJT, F2 Menu, Audio tab to see that both Transmit and Tune 
boxes are checked. This remembers the settings per band. 

73
Bob, K4TAX


Sent from my iPhone

> On Dec 2, 2019, at 11:23 AM, cx...@4email.net wrote:
> 
> Hola,
> 
> Problem with keying the VOX on the K3s with new install. Select "Tune",
> it turns red but xmtr does not key VOX.
> 
> Never had this problem with v 2.0.0. Double checked USB audio codex for
> both speaker and microphone. Parameters checked for Radio tab, K3s,
> using usb from KIO3 to computer, com4 (doublechecked Device manager for
> correct port), VOX tab checked, 38400 and 8-1-none for Data/stop/handshake.
> 
> Line in selected at 30 on K3s along with Vox gain at 30 (same as
> before). K3s mode selected for TX data and Data A menu selected.
> Received and decode FT8 no problem, still no xmit with VOX.
> 
> Do not see where I can go back to v2.0.0 as it no longer appears on
> WSJT-x website.
> 
> Suggestions?
> 73
> Tom
> HP1XT
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcg...@blomand.net 


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3s WSJT-x V2.1.2 no vox

2019-12-02 Thread cx7tt 

Hola,

Problem with keying the VOX on the K3s with new install. Select "Tune",
it turns red but xmtr does not key VOX.

Never had this problem with v 2.0.0. Double checked USB audio codex for
both speaker and microphone. Parameters checked for Radio tab, K3s,
using usb from KIO3 to computer, com4 (doublechecked Device manager for
correct port), VOX tab checked, 38400 and 8-1-none for Data/stop/handshake.

Line in selected at 30 on K3s along with Vox gain at 30 (same as
before). K3s mode selected for TX data and Data A menu selected.
Received and decode FT8 no problem, still no xmit with VOX.

Do not see where I can go back to v2.0.0 as it no longer appears on
WSJT-x website.

Suggestions?
73
Tom
HP1XT

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com