Re: [toaster] Simplehelpdeskfinal wont send mail through qmail setup
Thanks a lot! I took what you said and applied it to the toaster directions and it works now. What I think happened is simple operator error. During the setup of simplehelpdesk, I noticed that the 'mail' command was missing. I then proceeded to install mailx which also installed postfix. I removed postfix (and mailx). I ran the rpm -e --nodeps postfix command and didn't realize that I had to re-create the symbolic links to /usr/sbin/sendmail again... Thanks for the help. Deion Mule Christopher Original Message Follows From: Bill Shupp [EMAIL PROTECTED] Reply-To: toaster@shupp.org To: toaster@shupp.org Subject: Re: [toaster] Simplehelpdeskfinal wont send mail through qmail setup Date: Mon, 26 Mar 2007 12:15:38 -0700 Mo Mule wrote: I think it has something to do with: rpm -e --nodeps sendmail postfix So is it possible to have the qmail toaster AND mailx(postfix) running on the same machine? I don't recommend it. Or like I asked before, could it just need a new php command or wrapper to have it deliver email messages to the local qmail accounts? Does /usr/sbin/sendmail exist? And is it a symbolic link to /var/qmail/bin/sendmail? That's all you need for local injection to work. Regards, Bill _ The average US Credit Score is 675. The cost to see yours: $0 by Experian. http://www.freecreditreport.com/pm/default.aspx?sc=660600bcd=EMAILFOOTERAVERAGE
RE: [toaster] Whitelist error after mail server upgrade
For an update: I found info below on the Spamassassin site. I applied the change and restarted spamd to temporarily remove auto-whitelist option until someone can figure out what is causing the errors. I also noticed that in Spamassassin archives, there were other posters with similar problems, but no offers for a solution. Note for Users Upgrading to SpamAssassin 3.1.0 --- The use_auto_whitelist config option has been moved to a user config option, this allows individual users to turn on or off whitelisting regardless of what is set in the system config. If you would like to disable AWL (auto-whitelist) on a site-wide basis, then you can comment out the plugin in v310.pre. Mule --Mule was here!--
[toaster] Whitelist error after mail server upgrade
I updated my mail server and successfully transfered my mail backups over to the new machine. All is working fine except that I keep getting the following error in my /var/log/spamd/current file: @40004353abe90e173744 [6103] error: auto-whitelist: cannot open auto_whitelist_path /home/vpopmail/.spamassassin/auto-whitelist: Inappropriate ioctl for device @40004353abe90e2112b4 [6103] warn: auto-whitelist: open of auto-whitelist file failed: auto-whitelist: cannot open auto_whitelist_path /home/vpopmail/.spamassassin/auto-whitelist: Inappropriate ioctl for device @40004353abe90e2a462c [6103] error: Can't call method finish on an undefined value at /usr/lib/perl5/site_perl/5.8.6/Mail/SpamAssassin/Plugin/AWL.pm line 397, GEN77 line 1750. Any idea why I am getting this error? I checked the permissions on the .spamassassin folder and it has: drwx-- 2 vpopmail vchkpw 4096 Oct 17 08:49 ./ drwx-- 10 vpopmail vchkpw 4096 Oct 8 02:46 ../ -rw--- 1 vpopmail vchkpw 225280 Oct 9 23:01 auto-whitelist [EMAIL PROTECTED] The .spamassassin/ folder has the same: vpopmail vchkpw ownership. Thanks, Mule --Mule was here!--
Re: [toaster] SpamAssassin's Autolearn feature
Hi Hank, Thanks for the info. I will give both a try! Mule --Mule was here!-- --Republican Team Leader And Proud Of It!-- http://www.gopteamleader.com/about.asp
Re: [toaster] gmake problems
Thanks Bill! It was entirely my fault. I told my buddy to start _below_ where it lists the required applications needing installed (openssl, stunnel, etc). Now the whole ./configure --with-redhat did throw me... Thanks again, Deion Mule Christopher --Mule was here!-- --Republican Team Leader And Proud Of It!-- http://www.gopteamleader.com/about.asp Original Message Follows From: Bill Shupp [EMAIL PROTECTED] Reply-To: toaster@shupp.org To: toaster@shupp.org Subject: Re: [toaster] gmake problems Date: Thu, 25 Aug 2005 15:28:08 -0700 Mo Mule wrote: Whenever I type in ./configure --with-redhat I get at the end of the printout: configure: error: Cannot find either the gdbm or the db library. You need to install gdbm and gdbm-devel. Running gmake after this says: gmake: *** No targets specified and no makefile found. Stop. As it should. If configure fails, there will not be a Makefile. Regards, Bill
[toaster] gmake problems
Hi all, I am helping a friend set up qmail with all the fixings offered by this list. He is running Mandrake 10.1 (3 CD version) with a basic install (with URPMI), and high security. He is stuck on the courier-imap section - specifically with the ./configure command after tar -xjf tar/courier-authlib-0.56.tar.bz2 cd courier-authlib-0.56 ./configure It spits out toward the end: checking for perl5... /usr/bin/perl5 checking for courier-config... no then it displays a lot of configure: WARNING: === messages about it thinking he is running Redhat. Trying to run gmake after this will not work. Any ideas? Thanks, Deion Mule Christopher --Mule was here!-- --Republican Team Leader And Proud Of It!-- http://www.gopteamleader.com/about.asp Original Message Follows From: rene marticke [EMAIL PROTECTED] Reply-To: toaster@shupp.org To: toaster@shupp.org Subject: [toaster] High CPU-Load clamd Date: Thu, 25 Aug 2005 11:26:15 +0200 Hi group, At one of my mailserver something magic happen. Since 6pm yesterday, the CPU-Load is near 100% constant. So the system is very slow. The Process is the clamd. (I use toaster + simscan + clamd + spamd) I wonder, that there is no mail to scan by clamd for eg. 20 Minutes but the load don't go down. Can you give me some hints ? regards rene
Re: [toaster] gmake problems
Whenever I type in ./configure --with-redhat I get at the end of the printout: configure: error: Cannot find either the gdbm or the db library. Running gmake after this says: gmake: *** No targets specified and no makefile found. Stop. Deion Mule Christopher --Mule was here!-- --Republican Team Leader And Proud Of It!-- http://www.gopteamleader.com/about.asp Original Message Follows From: Bob Hutchinson [EMAIL PROTECTED] Reply-To: toaster@shupp.org To: toaster@shupp.org Subject: Re: [toaster] gmake problems Date: Thu, 25 Aug 2005 16:03:25 +0100 On Thursday 25 Aug 2005 15:19, Mo Mule wrote: Hi all, I am helping a friend set up qmail with all the fixings offered by this list. He is running Mandrake 10.1 (3 CD version) with a basic install (with URPMI), and high security. He is stuck on the courier-imap section - specifically with the ./configure command after tar -xjf tar/courier-authlib-0.56.tar.bz2 cd courier-authlib-0.56 ./configure maybe ./configure --with-redhat It spits out toward the end: checking for perl5... /usr/bin/perl5 checking for courier-config... no then it displays a lot of configure: WARNING: === messages about it thinking he is running Redhat. Trying to run gmake after this will not work. Any ideas? Thanks, Deion Mule Christopher --Mule was here!-- --Republican Team Leader And Proud Of It!-- http://www.gopteamleader.com/about.asp
RE: [toaster] Chkuser problem??
Believe me when I say I am _far_ from understanding this stuff. Do you have a Catch All account enabled? Where did the message end up? Deion Mule Christopher --Mule was here!-- --Republican Team Leader And Proud Of It!-- http://www.gopteamleader.com/about.asp Original Message Follows From: [EMAIL PROTECTED] Reply-To: toaster@shupp.org To: toaster@shupp.org Subject: [toaster] Chkuser problem?? Date: Wed, 27 Jul 2005 13:42:57 +0800 (HKT) Dear all, I found a strange problem in my server. Chkuser seems not work porperly. Here is the information: 2005-07-27 13:07:31.616557500 CHKUSER accepted rcpt: from [EMAIL PROTECTED]:[EMAIL PROTECTED]: remote www.ezrs.com:unknown:202.130.120.114 rcpt [EMAIL PROTECTED] : found existing recipient slx:~ # vuserinfo [EMAIL PROTECTED] no such user [EMAIL PROTECTED] [EMAIL PROTECTED] does not exist but chkuser let the message pass through. How can I fix the problem? Thanks a lot. Regards, qing.
[toaster] simscan query
I'm probably shooting myself in the foot - and quite possibly showing my ignorance - but in reference to: Received: by simscan 1.1.0 ppid: 26655, pid: 26656, t: 0.4758s scanners: attach: 1.1.0 clamav: 0.83/m:31/d:867 spam: 3.0.2 ...I was missing this too, until I started going back through the toaster and found two mistakes I had made. Under Vpopmail - echo '127.:allow,RELAYCLIENT=' ~vpopmail/etc/tcp.smtp (cd ~vpopmail/etc ; tcprules tcp.smtp.cdb tcp.smtp.tmp tcp.smtp) and under simscan - echo ':allow,QMAILQUEUE=/var/qmail/bin/simscan' ~vpopmail/etc/tcp.smtp ...I used the ~'s [`] instead of the 's ['] After I corrected these mistakes, I found that simscan and clamav were working properly. If this doesn't help, then please forget I ever posted this embarrasing work... MoMule --Mule was here!-- --Republican Team Leader And Proud Of It!-- http://www.gopteamleader.com/about.asp