Re: kernel 4.15.7/64bit, C3600 is unstable during heavy I/O on PCI

On Mon, Mar 19, 2018 at 8:37 PM, Grant Grundler wrote: ... >> this is an old log >> http://93.55.217.0/wonderland/chunk_of/user/ivelegacy/hppa-dev/ser-prim-2018-03-12--sata-crash BTW, I should point out one needs to give "CLEARPIM" command at PDC command line in order to

Re: kernel 4.15.7/64bit, C3600 is unstable during heavy I/O on PCI

[adding public lists back to CC since I can't sort this by myself any more] On Sat, Mar 17, 2018 at 6:45 PM, Carlo Pisani wrote: >> While the symptom (HPMC) looks the same, the details are likely >> different for each card. It's been over 10 years but ISTR that "SER >> PIM" command when entered a

Re: kernel 4.15.7/64bit, C3600 is unstable during heavy I/O on PCI

Hi John! On Sat, Mar 17, 2018 at 6:47 PM, John David Anglin wrote: > Hi Grant, > > On 2018-03-17 12:12 PM, Grant Grundler wrote: >> >> "Master Abort" means the MMIO >> transaction timed out - usually due to the device not responding to an >> MMIO read

Re: kernel 4.15.7/64bit, C3600 is unstable during heavy I/O on PCI

[adding lists back to CC since this is a public discussion] On Sat, Mar 17, 2018 at 5:36 PM, Carlo Pisani wrote: >> Would have to see dmesg output if the driver ever complains about >> invalid MMIO read data (~0L). > > I repeat AGAIN > > I have tested different sATA controllers > - via6421 > - SI

Re: kernel 4.15.7/64bit, C3600 is unstable during heavy I/O on PCI

Hi Helge, just a nit on PCI terminology... On Sat, Mar 17, 2018 at 12:36 PM, Helge Deller wrote: > * Carlo Pisani : >> I have created and applied the following patch >> testing the kernel with heavy I/O seems now stable >> >> my C3600 is still under testing, moving chunks of 500Mbyte and compilin

Re: Hp a180c

On Mon, Jun 19, 2017 at 12:45 AM, Mike Hosken wrote: > Hi team can anyone tell me if the SCSI terminator on the a180c is passive or > active and or if it matters which type you use. IIRC, a180c was SCSI-2 and thus should work fine with passive termination. I don't recall if the built-in scsi was

Re: A400 HP Server Issue

On Thu, Jul 21, 2016 at 6:05 AM, Mike Hosken wrote: > Hi Helge, > > The DD of image worked but still no interaction however I've made some > progress but still can interact via serial. What I've done is installed a > fresh Debian Jessie on my A180c installed sshd and then the 64 bit kernel, > via

Re: About structure sk_buff

On Mon, Jun 6, 2016 at 3:10 AM, Corcodel Marian wrote: > > > On 06.06.2016 12:59, Corcodel Marian wrote: > >> Hi >> Why sk_buff have memory allocated on hardware drivers on majority nic >> drivers? >> > This seems like an appropriate question for netdev mailing list: http://vger.kernel.org/

Re: question about HP Visualize B2000

On Mon, May 11, 2015 at 1:38 PM, Claudio Cailotto wrote: > Hi all, > > I’m Claudio and I write from Verona/Italy. > > I need a suggestion about an old HP PARISC workstation ( B2000 ) that I wish > restore to new life > > with Debian release. > > I’have install , of course , some release of Debian

Re: E Class and SCSI (53c700 driver)

On Thu, Apr 2, 2015 at 4:58 AM, James Bottomley wrote: ... > Well, what do you know: HP has a computer museum full of obsolete > documentation. > > http://www.hpmuseum.net/collection_document.php oh wow... > If anyone can identify the programming specs for the HP-PB (or better > still the actual

Re: E Class and SCSI (53c700 driver)

On Thu, Apr 2, 2015 at 1:59 AM, James Bottomley wrote: > Probably all that's needed is a tiny wrapper driver for whatever bus > it's on (what bus is this?). If you look at lasi, it basically pulls > the parameters out of firmware, translates the lasi specific IRQ setting > and enables the GS

Re: Report: success with debian 8.0 on C8000 via a console installation

On Fri, Mar 20, 2015 at 2:49 PM, Grant Grundler wrote: ... > You can also check the "LED Error Codes" as described in: > https://parisc.wiki.kernel.org/images-parisc/d/d5/B1xx-owners.pdf "TOC Button" is what I was looking for. Before booting linux, run "CL

Re: Report: success with debian 8.0 on C8000 via a console installation

On Thu, Mar 19, 2015 at 8:36 PM, Dmitry the Zuryanovich wrote: > Hi All, > >>> If anyone interested (and if the installation finishs fine in a hour >>> or so) I can post dmesg/lspci/whatever tomorrow. >> >> >> Yes, ok. > > B180 console log with lspci: > > http://pastebin.com/QvaWTggT Dmitry, than

Re: State of the PA-RISC/HPPA port (August 2013)

On Sun, Aug 4, 2013 at 8:38 AM, John David Anglin wrote: ... > The root= parameter mostly works for me. However, different kernels > sometimes change the order of disk discovery when you have multiple > drives. Helge thinks it would be easy to specify file system by uuid. Helge is as usual corr

Re: New install on HP C3750

On Mon, Dec 10, 2012 at 6:46 AM, Laurent Menase wrote: > for cksum error, did you put terminators on scsi buses? worse it trying I don't believe his problems have anything to do with SCSI termination. I believe C3xxx use IDE DVD-ROM drives, not SCSI. The key problems appeared to be (1) 64-bit ke

Re: hppa packages missing?

On Fri, Dec 16, 2011 at 5:28 PM, John David Anglin wrote: > On 16-Dec-11, at 8:34 AM, John David Anglin wrote: > >> On 15-Dec-11, at 8:06 PM, Grant Grundler wrote: >> >>> The main problem was dselect wanted to remove locales among many >>> packages because g

hppa packages missing?

Hi Folks! I tried to power up and update my j6k and failed badly. I wanted to test a kernel change for Michael Tsirkin: http://www.spinics.net/lists/linux-parisc/msg03896.html The main problem was dselect wanted to remove locales among many packages because glibc and other dependencies couldn

Re: Status of hppa on debian-ports.

On Sat, Jul 09, 2011 at 11:07:03AM +0200, Thibaut VARENE wrote: ... > > is there really a spam problem to not open it up to registered users ? > > No. The WikiAccessPolicy page is full of lies and this system is only > there to annoy people... > :-/ Sorry Mike. We did have a real spam problem wit

Re: kernel 2.6.32-5-parisc64 doesn't boot

On Wed, Sep 22, 2010 at 02:09:11PM +1200, Michal Ludvig wrote: > On 06/23/2010 05:47 PM, Michal Ludvig wrote: > > Hi all, > > > > After recent dist-upgrade in Squeeze my HP9000 RP3410 no longer boots. I > > can still boot the previous linux-image 2.6.32-3-parisc64 but the new > > 2.6.32-5-parisc64

Re: kernel 2.6.32-5-parisc64 doesn't boot

On Wed, Jun 23, 2010 at 05:47:35PM +1200, Michal Ludvig wrote: > Hi all, > > After recent dist-upgrade in Squeeze my HP9000 RP3410 no longer boots. I > can still boot the previous linux-image 2.6.32-3-parisc64 but the new > 2.6.32-5-parisc64 never finished booting. I just want to confirm that 2.6

Re: kernel 2.6.32-5-parisc64 doesn't boot

+linux-parisc (seems like a known kernel issue) On Wed, Jun 23, 2010 at 05:47:35PM +1200, Michal Ludvig wrote: > Hi all, > > After recent dist-upgrade in Squeeze my HP9000 RP3410 no longer boots. I > can still boot the previous linux-image 2.6.32-3-parisc64 but the new > 2.6.32-5-parisc64 never f

Re: failed hppa build of hpcc 1.4.0-2

On Fri, May 07, 2010 at 12:32:45PM +0200, Lucas Nussbaum wrote: > Dear Debian-hppa, > > On 06/05/10 at 20:30 +, Debian buildds wrote: > > * Source package: hpcc > > * Version: 1.4.0-2 > > * Architecture: hppa > > * State: failed > > * Suite: unstable > > * Builder: lafayette.debian.org >

Re: Install hangs on HP c8000 - 'Turn off boot console ttyB0'

On Wed, May 05, 2010 at 04:23:13PM +0200, Geert Lorang wrote: > > > Actually I'm not the author of this tip... Geert Lorang told me to do > > this, but I don't have any serial card around. Anyways, it's great to hear > > it works. Maybe now I can convince my boss to buy one for me to do these > >

Re: 9000/785/C8000 - turn off boot console ttyB0

On Tue, Mar 23, 2010 at 10:10:29PM +0100, Geert Lorang wrote: > On 22/03/2010 19:55, Frans Pop wrote: >> My own parisc box is headless and works fine over serial console. > I'm trying to install this box but can't get into the installer. >> Have you checked the firmware configuration for your box?

Re: PA8800/8900 status & HPPA for Squeeze

On Mon, Mar 15, 2010 at 04:50:02PM -0300, Kurt Fitzner wrote: > Being a great fan of HPPA (these machines just last forever) I have the > opportunity to pick up a cheap C8000. I noticed a few notes about > instability of Linux with PA8800/8900. The most up-to-date reference I > could find, though

Re: access to hppa machine to work on Bug#558980

On Mon, Dec 14, 2009 at 07:46:52AM -0500, Stephen Leake wrote: ... > Ludovic also suggested removing '-fstack-check' from the list of > compiler options. I did that, rebuilt the static and dynamic > libraries, and the bug went away; the test code works with both static > and dynamic libraries. Dav

Re: Bug in V_Sim package

On Sat, Nov 28, 2009 at 02:52:50PM -0500, Carlos O'Donell wrote: > On Sat, Nov 28, 2009 at 12:52 AM, Grant Grundler > wrote: ... > > https://buildd.debian.org/build.php agrees that none of the above > > exists for hppa. That seemsodd. There should be at least

Re: Bug in V_Sim package

On Fri, Nov 27, 2009 at 10:52:58PM -0700, Grant Grundler wrote: > On Fri, Nov 27, 2009 at 02:17:13PM +0100, Damien Caliste wrote: > > Hello, > > > >I'm developer of the v-sim package (see > > http://packages.qa.debian.org/v/v-sim.html) and I see that the p

Re: Bug in V_Sim package

On Fri, Nov 27, 2009 at 02:17:13PM +0100, Damien Caliste wrote: > Hello, > >I'm developer of the v-sim package (see > http://packages.qa.debian.org/v/v-sim.html) and I see that the package > is blocked because of failing compilation on hppa architecture. > >I've looked at the logs, but I

Re: Reproducible random python crash.

On Fri, Aug 21, 2009 at 07:36:47PM +0200, Frans Pop wrote: ... > John David Anglin wrote: > > Do you have Grant's last patch installed? Although it's early yet > > to say for sure, I think it may have fixed the random segv problem > > on gsyprf11 with 2.6.30.5. > > What patch is that? Link? here

Re: Cannot boot 2.6.26 kernel on HPPA N4000

On Mon, Jul 27, 2009 at 11:16:21PM +0200, Moritz Muehlenhoff wrote: ... > However, maybe the PCI card, which causes the collision can be temporarily > removed, so that the installation proceeds. After that, the 2.6.30 kernel > from unstable could be installed and the PCI card re-plugged in. That s

Re: Cannot boot 2.6.26 kernel on HPPA N4000

On Sat, Jul 25, 2009 at 05:08:24PM +0200, Thibaut VARENE wrote: > On Sat, Jul 25, 2009 at 4:10 PM, Moritz Muehlenhoff wrote: > > > [Adding debian-hppa to CC and quoting in full] > > > > Is this a known issue, has it been fixed in current kernels from unstable? > > I believe this relates to that p

Re: Cannot boot 2.6.26 kernel on HPPA N4000

Moritz, thanks for forwarding... On Sat, Jul 25, 2009 at 04:10:04PM +0200, Moritz Muehlenhoff wrote: > > Attempting to boot a 2.6.26 kernel on an HP N4000 machine (64 bit PA-RISC) > > yields the following results (beginning at system startup): > > <> ... > > Elroy version TR3.0 (0x4) found at 0xf

Re: HPPA and Squeeze

On Sat, Jun 20, 2009 at 06:25:20PM -0400, John David Anglin wrote: > > > I've never been able to file any (non-automated) bug report in > > > 5 minutes. And if you don't even have direct access to the > > > hardware it takes longer. > > > > I agree. I'm trying to build netgen here too and if the

Re: HPPA and Squeeze

On Sat, Jun 20, 2009 at 07:48:38PM +0200, Kurt Roeckx wrote: ... > I know how to file gcc bugs. I've just filed one. I didn't > have time to try and reduce the testcase, and I can't try > different versions of g++ yet. I've asked to have different > versions installed on paer. > > The bug repor

Re: HPPA and Squeeze

On Tue, Jun 16, 2009 at 05:13:44PM -0600, dann frazier wrote: > On Wed, Jun 17, 2009 at 12:01:31AM +0100, Stephen Gran wrote: > > This one time, at band camp, dann frazier said: > > > Are we still having random segfaults on paer? If so - that's be a good > > > one to resolve. Not sure if DSA would

Re: HPPA and Squeeze

On Tue, Jun 16, 2009 at 08:25:31AM +0200, Lucas Nussbaum wrote: ... > > BTW, that firewall was reviewed and approved by Lamont (a pretty well > > known DD and buildd maintainer). > > > > Thibaut Varene (who is a DD) has offered to host HPPA buildd machines > > as well but hasn't heard any response

Re: HPPA and Squeeze

On Fri, Jun 12, 2009 at 08:49:26AM +0200, Luk Claes wrote: > Grant Grundler wrote: > > +linux-parisc (hppa kernel, compiler and !debian tech forum) > > > > Neil, > > thanks for the summary. I know this is an unpleasant business in general. > > > > On Tue,

Re: HPPA and Squeeze

olitician. No > expenses though... No problem. > > On Sat, Jun 06, 2009 at 12:36:01PM -0600, Grant Grundler wrote: > > Carlos O'Donnell asked some questions in response to [0] and I never > > saw any response. Can an attendee of the above meeting please reply > >

Re: HPPA and Squeeze

+linux-parisc (hppa kernel, compiler and !debian tech forum) Neil, thanks for the summary. I know this is an unpleasant business in general. On Tue, Jun 02, 2009 at 03:07:35PM +0100, Neil McGovern wrote: > Hi, > > As mentioned previously[0], the release team haven't been happy with the > state o

Re: Boost build failure on hppa

On Sat, May 16, 2009 at 02:53:41PM +, Philipp Kern wrote: > [ Please Cc me as I'm not subscribed to the list. ] > > On 2009-05-14, Steve M. Robbins wrote: > > On Wed, May 13, 2009 at 05:37:36PM +0200, Domenico Andreoli wrote: > >> On 5/12/09, Steve M. Robbins wrote: > >> > > >> > No other a

Re: Fixed strace [ was Re: ls -l is broken ]

On Wed, May 06, 2009 at 12:04:42PM -0400, Kyle McMartin wrote: ... > At a guess, you're probably right, the faulting insn is a load: > > 0x0002b3a8 <__canonicalize_funcptr_for_compare+48>: bb,>= r26,1e,0x2b394 > <__canonicalize_funcptr_for_compare+28> > 0x0002b3ac <__canonicalize_funcptr_for_co

Re: hppa in danger of being ignored for testing migration and eventual removal

On Tue, Apr 28, 2009 at 03:34:36PM -0600, dann frazier wrote: ... > > > * The machines that host the buildds still seem to have a very > > > unreliable kernel. Is there any update on this? > > > > I can't comment on this. > > Thibaut had planned to setup a second buildd (and I think had it up > f

Re: Re : lenny / testing : missing USB device files

On Sun, Feb 15, 2009 at 11:54:58AM +0100, Helge Deller wrote: > Hi Jean-Pierre, > (added linux-parisc mailing list) > > I just tested the debian kernel on my c3k. c3k is a totally different chipset and MMIO mapping than the C360 (original problem report). > For me a small external USB disk (250G

Re: HPPA and lenny

On Fri, Dec 19, 2008 at 06:57:07PM +0100, Luk Claes wrote: > Kyle McMartin wrote: > > On Fri, Dec 19, 2008 at 05:19:46PM +0100, Peter Palfrader wrote: > >> I know very little about hppa, but from what I read in this thread - > >> which was surprisingly helpful so far - it's the kernel that makes st

Re: status of ruby1.9 on hppa

On Thu, Oct 16, 2008 at 01:55:57PM +0300, Aioanei Rares wrote: ... > AFAICT Gentoo supports HPPA too. But I expect they depend heavily on debian. ie installer, compiler, source packages, etc. They have even fewer people working on hppa. cheers, grant -- To UNSUBSCRIBE, email to [EMAIL PROTECTE

Re: Status of HPPA in Lenny

On Mon, Oct 13, 2008 at 03:44:07PM -0700, kfitzner wrote: > > The talk in the ruby thread about dropping HPPA from the Lenny architectures > has concerned me. I'm wondering if anything definite has been decided, and > if not, when a decision is likely? I have several HPPA machines in > productio

Fwd: Etch 4.0ra Installer Hang on J6000 Workstation

, score=-2.5 required=5.5 tests=BAYES_00,FORGED_RCVD_HELO autolearn=ham version=3.1.4 From: "Mark S. Kolich" <[EMAIL PROTECTED]> Reply-To: [EMAIL PROTECTED] To: Grant Grundler <[EMAIL PROTECTED]> Subject: Re: [Fwd: Etch 4.0ra Installer Hang on J6000 Workstation] X

Re: compiling 64-bit binaries?

On Thu, Aug 28, 2008 at 10:31:54PM -0400, Brian Szymanski wrote: > Hello all... > > 2 new questions from the proud new owner of an old PA-RISC machine :-) > > Is it possible to compile 64 bit binaries on debian/hppa? All the docs > out there seem to indicate no, but there is a 64-bit kernel avail

Re: who actually cares about debian on hppa?

On Tue, Jul 22, 2008 at 10:54:28AM -0400, Kyle McMartin wrote: > Informal poll time. > > Please only say you care iff, > 1 - you are going to fix things > 2 - you have time to fix things I can fix some things but only have 1-2 hours per week to fix them. > > Let's not delude ourselv

Re: cursor under emacs on a c3750 with fxe graphics

On Thu, Jun 26, 2008 at 03:06:41PM +0200, howlingmadhowie wrote: > hi :) > > i just got a c3750 hp workstation and installed etch on it. emacs21-nox > works fine apart from the fact that i can't see a cursor. is there an easy > fix for this? Is emacs21-nox using xterm or something else? If it's x

Re: Ethernet bonding possible ?

On Tue, Jun 24, 2008 at 04:46:37AM -0700, ChatUser wrote: > I usually use ethernet bonding on x86 machines, but the module bonding is not > present on the modules directory. > > Is it possible to use this feature on Debian/HPPA ? Yes. bonding is implemented in the higher level networking stack a

Re: HP-HIL Technical Reference Information Needed

On Fri, Jun 20, 2008 at 09:22:35AM -0400, Carlos O'Donell wrote: > On Thu, Jun 19, 2008 at 6:49 PM, Jim Flanagan <[EMAIL PROTECTED]> wrote: > > I am trying to track down the HP-HIL Technical reference manual (HP > > #45918A). > > PARISC linux supports HP-HIL devices, so someone must have access to

Re: Trying to boot a C360 with graphic console

On Thu, Jun 12, 2008 at 11:49:19PM +0200, Jean-Pierre HOFER wrote: ... > > Maybe it's even possible to do a BIOS/ROM/PDC update to get the card on > > a higher/supported ROM version level? I don't know for sure. > > I suppose that such an update would require a running HP-UX operating system ? M

Re: kde4libs vs qt4

On Wed, Jun 11, 2008 at 11:54:49PM +0200, Helge Deller wrote: > Hello Sune, ... > Attached are the basic pieces which should get it working with the > qt4-x11_4.4.0-3 source package. My machine is still compiling, but it seems > OK so far... > > First of all, I reused the "parisc" architecture co

Re: kde4libs vs qt4

On Tue, Jun 10, 2008 at 09:27:41AM -0400, Carlos O'Donell wrote: ... > Unfortunately I think you're approach won't work due to the alignment > requirements placed on ldcw? It has to be 16-byte aligned according to > the architecture docs. I'll remind of the comments added to our asm/system.h: 168

AUTOTEST: hppa support for libaio

Hi Martin (Bligh), I am trying to follow directions on: http://test.kernel.org/autotest/QuickStart on a parisc machine and quickly ran into this error: j6k:/usr/local/autotest# bin/autotest tests/fsx/control Initializing the state engine. Symlinking init scripts START timest

Re: C200: 64bit install problems

On Mon, Jun 02, 2008 at 05:23:14PM +0200, Christian Hilgers wrote: > Dear all, > > I was able to install a C200 via network from this image: > > file /tftpboot/debian-40r3-hppa-netinst.iso > /tftpboot/debian-40r3-hppa-netinst.iso: ISO 9660 CD-ROM filesystem data > 'Debian 4.0 r3 hppa Bin-1 '

Re: Bug#482902: please provide libc6-hppa64 and libc6-hppa64-dev packages

On Mon, May 26, 2008 at 01:05:49AM -0700, Matt Taggart wrote: > > > The developer machines have been unavailable for months, so Debian > > > developers who don't have their own hppa machine are unable to work on > > > their own packages or fix bugs. > > > > We had some machines setup and running l

Re: developer accessible machines

On Fri, May 16, 2008 at 08:13:08PM +0200, Mike Hommey wrote: > On Wed, May 14, 2008 at 03:07:44AM +0200, Thibaut VARENE wrote: > > On Tue, May 13, 2008 at 8:38 AM, Mike Hommey <[EMAIL PROTECTED]> wrote: > > > Hi, > > > > > > Are there plans to make hppa machines available to developers in the > >

Re: Erlang 12.b.2-2 FTBFS on hppa architecture

On Sun, Apr 27, 2008 at 03:20:30PM +0400, Sergei Golovan wrote: > Hi! > > The latest version of erlang package FTBFS on hppa architecture (see > [1]). The error message (and digging into the source) shows that there > could be a race condition or monotonic clock on hppa isn't really > monotonic.

Re: Kernel panic after upgrade from 2.6.22-1 to 2.6.24-1

On Sun, Apr 20, 2008 at 06:33:53PM +0200, J??rgen Leibner wrote: > Hello, > > today I upgraded my HP9000 running debian lenny/sid. > Mostly all went well. > Unfortunatly after reboot the kernel panics. Thanks for the reportthis is a fixed problem: http://www.kernel.org/pub/linux/kernel/v2

Re: Approval to upload gcc-defaults 1.70?

On Thu, Apr 17, 2008 at 11:54:13AM -0400, Kyle McMartin wrote: > On Thu, Apr 17, 2008 at 12:11:30PM +0200, Aurelien Jarno wrote: > > Have you narrowed done the problem to find if it is a gcc bug or a > > kernel bug? > > > > It fails with gcc-4.3, and works fine with all previous versions... > >

Re: Approval to upload gcc-defaults 1.70?

On Wed, Apr 16, 2008 at 02:48:09PM +0200, Matthias Klose wrote: > Grant Grundler writes: ... > > Has anyone built a kernel with this version of gcc-4.3 and tried it? > > Can I "apt-get install -t sid gcc-4.3" on my hybrid system and get > > the right version? >

Re: Approval to upload gcc-defaults 1.70?

On Wed, Apr 16, 2008 at 02:48:09PM +0200, Matthias Klose wrote: > Grant Grundler writes: > > On Sun, Apr 13, 2008 at 11:53:54PM +0200, Aurelien Jarno wrote: > > ... > > > FYI the glibc testsuite with gcc-4.3 on HPPA now gives the same results > > > than with gcc-4.

Re: Approval to upload gcc-defaults 1.70?

On Sun, Apr 13, 2008 at 11:53:54PM +0200, Aurelien Jarno wrote: ... > FYI the glibc testsuite with gcc-4.3 on HPPA now gives the same results > than with gcc-4.2, except on one FPU test, due to a bug in the *glibc*. > > So it *seems* HPPA is ready for gcc-4.3 by default. Has anyone built a kernel

Re: [alpha, hppa] GCC-4.3 as the default compilers for lenny?

On Sat, Mar 29, 2008 at 06:24:12PM +, rubisher wrote: ... >> I looked at gcc-43 build output to check warnings related to networking >> as suggest by John David Anglin. ... > That remember me that when I discover those new warnings with gcc-4.2 >

Re: [alpha, hppa] GCC-4.3 as the default compilers for lenny?

On Wed, Mar 26, 2008 at 10:20:35AM -0600, Grant Grundler wrote: > Another gcc problem report: > > That past weekend I built the latest parisc-2.6-25-rc6 kernel from > Kyle's tree using gcc-4.1, gcc-4.2, and gcc-4.3. All three kernels > booted but the networking only worke

Re: [alpha, hppa] GCC-4.3 as the default compilers for lenny?

On Tue, Mar 25, 2008 at 06:42:44PM -0400, Carlos O'Donell wrote: > On Sat, Mar 22, 2008 at 6:10 PM, Aurelien Jarno <[EMAIL PROTECTED]> wrote: > > I have tried to build the glibc with GCC 4.3 on hppa, and rpcgen > > segfaults when it is used, so the build fails. I haven't start to > > investigate

Re: [alpha, hppa] GCC-4.3 as the default compilers for lenny?

On Wed, Mar 26, 2008 at 10:20:35AM -0600, Grant Grundler wrote: > Another gcc problem report: > > That past weekend I built the latest parisc-2.6-25-rc6 kernel from > Kyle's tree using gcc-4.1, gcc-4.2, and gcc-4.3. All three kernels > booted but the networking only worke

Re: Pa8900 support

On Tue, Feb 26, 2008 at 04:56:03PM +0100, Tonton wrote: > http://cdimage.debian.org/debian-cd/4.0_r3/hppa/iso-cd Can you try the "testing" netinstall CD from here? http://www.debian.org/devel/debian-installer/ Specifically, this image: http://cdimage.debian.org/cdimage/daily-builds/daily

Re: [Fwd: Hardware]

On Tue, Jan 15, 2008 at 11:05:05PM +0100, wr35nn89 wrote: > Hi, > sorry for this post, i've found the problem . I have reseat the RAM. > So, Debian testing is on, i'm running 2.6.22-3-parisc64 image. > I have add a nvidia quadro4 nvs280 PCI card and I'd like to know if > there is a chance that

Re: what about a second nic?

On Sun, Jan 13, 2008 at 12:21:18PM +0100, kmaziz wrote: > well which cards should I aim to buy? > I thought any of these would work since they are supported for J-Class > according to the previous pdf. > > Which one is to prefer? > A4926A > A4926 > A4929A > J3515A > J3516A Sorry, I have no idea w

Re: what about a second nic?

On Sat, Jan 12, 2008 at 08:09:08AM -0700, Matthew Wilcox wrote: > On Sat, Jan 12, 2008 at 02:55:20PM +0100, kmaziz wrote: > > The system is a J6700 with debian parisc installed. I need a second network > > card in this but which sort of lan cards will fit this system? A regular pci > > nic for PC c

Re: Only 2 port maintainers?

On Fri, Dec 28, 2007 at 11:37:27AM +0100, Thibaut VARENE wrote: > On Dec 28, 2007 9:34 AM, Grant Grundler <[EMAIL PROTECTED]> wrote: > > > glibc/toolchain also have a few people looking at it. But if you can > > remind "us" ([EMAIL PROTECTED]) kernel stuff is br

Re: Only 2 port maintainers?

On Fri, Dec 28, 2007 at 01:56:25AM +0100, Domenico Andreoli wrote: > On Fri, Oct 26, 2007 at 10:58:55AM +0200, Luk Claes wrote: > > Hi > > Hi, > > > Please add yourself to [0] if you're actively working on hppa issues. Feel > > free to complete the page for the other criteria too. > > I have a

Re: Only 2 port maintainers?

On Fri, Oct 26, 2007 at 10:58:55AM +0200, Luk Claes wrote: > Please add yourself to [0] if you're actively working on hppa issues. Feel > free to complete the page for the other criteria too. > > Cheers > > Luk > > [0] http://wiki.debian.org/hppaLennyReleaseRecertification Can anyone else sign up

Re: Mouse is not working under Gnome

On Wed, Sep 19, 2007 at 02:06:43PM +0100, BETA CAROTIN wrote: > the X-Server is starting up properly, but my mouse just > won't work. Do you have any idea why that is so? Well, X11 is finding some sort of mouse or it wouldn't start. Can you try a different mouse? > [EMAIL PROTECTED]:~$ cat /

Re: Request assistance with monotone package on alpha, hppa, mipsel, powerpc, s390

On Thu, Sep 06, 2007 at 08:59:18AM -0600, Grant Grundler wrote: > Build results for hppa: > > Of 446 tests run: > 0 succeeded > 444 failed > 2 had expected failures > 0 succeeded unexpectedly > 0 were skipp

Re: Request assistance with monotone package on alpha, hppa, mipsel, powerpc, s390

[ dropped alpha/mips/powerpc MLs from CC list] On Mon, Sep 03, 2007 at 06:59:28PM -0700, Zack Weinberg wrote: > I'm one of the maintainers of the Debian package of monotone; I'm also > one of its upstream developers. For the new 0.36-1 package presently > in unstable, we decided to run the progra

Re: Request assistance with monotone package on alpha, hppa, mipsel, powerpc, s390

On Mon, Sep 03, 2007 at 06:59:28PM -0700, Zack Weinberg wrote: > I'm one of the maintainers of the Debian package of monotone; I'm also > one of its upstream developers. For the new 0.36-1 package presently > in unstable, we decided to run the program's testsuite during the > build. This found fa

Re: apt-cache causes freeze and aptitude a kernel panic on hp9000 d360/2 with fresh installed debian etch

On Wed, Aug 22, 2007 at 11:16:08PM +0200, J??rgen Leibner wrote: > Hello to all, > > any hints to the following? > Linux version 2.6.18-5-parisc-smp (Debian 2.6.18.dfsg.1-13etch1) ... > Backtrace:0% > [<101135c4>] L34+0x1c/0x84 > [<101093c4>] handle_interruption+0x404/0x59c > [<1010d090>

Re: Bug#433768: FTBFS[hppa]: QMAKESPEC has not been set, so configuration cannot be deduced.

On Fri, Jul 20, 2007 at 07:49:22AM -0500, Steve M. Robbins wrote: ... > > cd src && qmake-qt4 > > QMAKESPEC has not been set, so configuration cannot be deduced. > > Error processing project file: /build/buildd/ipe-6.0pre28/src/main.pro > > #v- > > So what's special about hppa? All the other arch

Re: help needed on installing Debian 4.0 on A180C

On Thu, Jul 19, 2007 at 11:24:37PM +0200, Angelo Machils wrote: >> yes, there should be - assuming /boot was created and mounted properly. >> If not, hunt for the right linux-image (32-bit UP) and install it. > > The /boot has been created and is mounted, but I thought I made it 100mb > and it's i

Re: help needed on installing Debian 4.0 on A180C

On Tue, Jul 17, 2007 at 01:04:38AM +0200, Angelo Machils wrote: > > On 16-jul-2007, at 20:24, Grant Grundler wrote: > >> On Mon, Jul 16, 2007 at 08:44:49AM +0200, Angelo Machils wrote: >> ... >>> I'm sorry to say so, but apparently it *is* possible. uname -r

Re: help needed on installing Debian 4.0 on A180C

On Mon, Jul 16, 2007 at 08:44:49AM +0200, Angelo Machils wrote: ... > I'm sorry to say so, but apparently it *is* possible. uname -r gives > me a 2.4.x kernel as response. I did do an install of 3.0r4 and > *then* a dist-upgrade to 4.0rx, perhaps that is the reason. It is. AFAICT, parisc will

Re: [OMPI devel] Build failures of 1.2.3 on Debian hppa, mips, mipsel, s390, m68k

On Sat, Jul 14, 2007 at 04:03:44PM -0600, Matthew Wilcox wrote: ... > This makes implementing atomic functionality "interesting", to say > the least. Carlos O'Donell has implemented some kernel helper routines > to aide this, but that would tie the implementation to linux -- I don't > know if you

Re: help needed on installing Debian 4.0 on A180C

On Fri, Jul 13, 2007 at 09:25:32AM +0200, Angelo Machils wrote: >> I suspect an HPMC (High Priority Machine Check) when some driver gets >> loaded and it pokes around where it shouldn't. I'm not sure how to >> avoid this offhand but expect some "expert mode" would allow one >> to mount the DVD (it'

Re: help needed on installing Debian 4.0 on A180C

On Tue, Jul 10, 2007 at 12:51:03AM +0200, Angelo Machils wrote: > Hello, > > I just got 3 working A180C's from work which weren't used anymore and I > wanted to install Linux on them. But I'm having some problems installing > 4.0r0 from DVD. After booting properly and going through the language a

Re: boot 9000/800/L3000-6x failure after successful installation

On Thu, Jul 12, 2007 at 11:03:45AM +0800, Sonnie Hook wrote: > I have booted 9000/800/L3000-6x from 3.1-r6a CD. > In the partition step, I seleced /dev/sdb to install the system on > and created 3 partitions: > /boot pa 100MBboot flag on > swap 1GB > / ext3 10GB > >

Re: install debian 4.0 to HP A180

On Tue, Jun 26, 2007 at 10:35:21AM +0300, Mike Pechkin wrote: > hi, > > I need help, screen hangs > server: HP A180 > os: Debian 4.0 DVD image > console: HP Web Secure console at serial port > > 1. download DVD image, burn it > 2. plugin external HP DVD ROM > 3. boot from CD > 4. select language an

Re: Compilation linux-source-2.6.18

On Mon, Jun 18, 2007 at 12:45:49AM -0700, Ben wrote: > > > > Hello Grant, > > Thank you for looking at this. > > My build instructions come from the man page for make-kpkg. > (Is that what you meant?) > > In other words what I did was: > > apt-get linux-source-2.6.14 > unpack the archive > m

Re: Compilation linux-source-2.6.18

On Sun, Jun 17, 2007 at 03:05:30AM -0700, Ben wrote: > Hello, > > I have just upgraded my 712 to etch and am trying to compile a kernel. > Compilation fails in arch/parisc/mm/init.c with the following error: > > make-kpkg --initrd --append-to-version=-ben linux-image ... > arch/parisc/mm/init.c:3

Re: booting L2000 from netinstall image and netboot fails with panic

On Mon, Jun 04, 2007 at 08:18:47PM +0200, Christian Hilgers wrote: > Grant Grundler schrieb: > > >2) answer "y" to "Interact with Boot loader" question. > > entire the number of the last parameter (as if you wanted > > to edit that paramter. _ap

Re: booting L2000 from netinstall image and netboot fails with panic

On Fri, Jun 01, 2007 at 02:55:27PM +0200, Christian Hilgers wrote: > Hi, > > I tried to install one (of two) L2000-36 (both running fine with > HPUX 11.11, ioscan below) with Linux on a seperate disk. > > I tried to install using debian-40r0-hppa-netinst.iso > (CD was verified, md5sum taken from

Re: Kernel 2.6.21-1 oops on portmap

On Wed, May 30, 2007 at 10:27:41PM +0200, Frans Pop wrote: > I also was not able to boot my hppa with 2.6.21 (only tried parisc64-smp). > See #426391. Frans, it would be worth pulling from kyle's git tree and trying that again. He just posted three important fixes to parisc-linux mailing list. It

Re: hp j6700 and mathworks

On Mon, Mar 12, 2007 at 11:10:40PM +0100, kmaziz wrote: > I wonder if its possible to use mathworks, mathlab with J6700 -HPUX? Did you try to google for it? Really amazing thing those new fangled search engines... :) > And if anyone has done it... Not to spoil your fun, but there must be some HP

Re: still questions about J6700 - fancontrol, heat, graphics..

On Mon, Feb 19, 2007 at 12:26:56AM +0100, kmaziz wrote: > I did as Kyle said, updated the pciids, and now i have Visualize FX, still > not FX10Pro.. doesnt matter anyway.. > > I changed the fan configuration from "rack mount" to workstation, i got less > sound (but still not enough to work without

Re: questions on J6700 and its FX10-pro graphics card

On Sun, Feb 11, 2007 at 10:17:12PM +0100, kmaziz wrote: > Ive bought a HP J6700, and ive been reading that the FX10-Pro graphics card > is not supported on any linux dist. > Why is that? Lack of documentation for those graphics cards. > Is it possible to put in a supported graphic card and use Xor

Re: Reg. endianity, 32/64-bit and GCC macros.

On Mon, Jan 22, 2007 at 09:51:55PM -0500, Carlos O'Donell wrote: > 2. hppa-linux only supports a 32-bit userspace. This is true - but some folks do occassionally poke at trying to bring a 64-bit user space to life. In general, I think it's a bad idea to assume a 32-bit user space. > 3. You can us

  1   2   3   4   5   6   >