Hola a todos!!!
Aquí vuelvo desde Uruguay después de una pausa de varios meses por los
estudios. Les deseo a todos muy feliz año 2000
On Sun, Jan 09, 2000 at 07:29:36AM -0300, Alvarez Ricardo Marcelo wrote:
Alguien sabe de algun parche para el kernel para que me soporte la placa
de
The included message could not be delivered to the following invalid mail
names. Please verify these names and try them again.
Bad name: jcarlosh
---BeginMessage---
Hola a todos!!!
Aquí vuelvo desde Uruguay después de una pausa de varios meses por los
estudios. Les deseo a todos muy feliz
El domingo 09 de enero de 2000 a la(s) 21:09:32 +0100, Manel Marin contaba:
Me lo he estado pensando y con opciones tan peligrosas como Umount, Boot,
Reboot
no me parece apropiado que todo principante utilice la tecla MAGIC... aunque
a mi me parece GENIAL!!!
También la opción kIll
Hola a todos.
Al fin he conseguido actualizar mi kernel de 2.0.36 a 2.2.4 pero no
tenía ni idea de que hubiese tantas opciones para configurar y en la mayoría
he dejado lo que venía por defecto. Se puede volver a recompilar si es
necesario, ¿no?
Bueno, lo que a mí principalmente me
El domingo 09 de enero de 2000 a la(s) 22:13:33 +0100, Manel Marin contaba:
(Nadie ha sabido decirme que comando usar para reiniciar el modo grafico VGA)
El paquete svgatextmode tiene buena pinta. 'man stm':
-o Force all standard VGA registers to a known
On Mon, Jan 10, 2000 at 01:41:49AM +0100, Emilio Hernández Martín wrote:
que será en type pero no estoy seguro y tampoco sé si bastará con escribir
ahí vfat y borrar msdos y ya está.
Por favor, ¿me podríais ayudar? Muchas gracias.
Te basta con eso, si.
Jordi
Así como lo tienes ahora,
Hola a todos,
On Fri, Jan 07, 2000 at 09:58:38PM -, Miguel A. Abarca wrote:
1) ¿Por qué cuando ejecuto 'startx' como usuario normal me sale el
siguiente mensaje de error:?
Fatal server error:
Eso es porque sólo le has dado permiso al root para ejecutarlo. En la segunda
linea
Es solo una idea pero nos pico un pelin y queremos intentarlo... y
prefiero saber si es posible antes de descubrir que es imposible y
haberme tiradotropecientos años y medio intentándolo...
Puedes hacerlo de la misma forma que todas las distribuciones lo hacen,
copian un kernel en alguna
At 02:23 AM 2000-01-10 +0100, [EMAIL PROTECTED] wrote:
Es solo una idea pero nos pico un pelin y queremos intentarlo... y
prefiero saber si es posible antes de descubrir que es imposible y
haberme tiradotropecientos años y medio intentándolo...
Puedes hacerlo de la misma forma que todas las
Si la placa de sonido es esa.
Gracias.
Marcelo Ramos wrote:
Hola a todos!!!
Aquí vuelvo desde Uruguay después de una pausa de varios meses por los
estudios. Les deseo a todos muy feliz año 2000
On Sun, Jan 09, 2000 at 07:29:36AM -0300, Alvarez Ricardo Marcelo wrote:
Alguien sabe de
-Mensaje original-
De: Raul Gonzalez [SMTP:[EMAIL PROTECTED]
Enviado el: sábado 8 de enero de 2000 18:51
Para: debian-user-spanish@lists.debian.org
Asunto: CD completo
Acabo de comprarme el grabador de CD, y hablando con un amigo se nos
ocurrió la idea de poner el kernel
On Sat, 8 Jan 2000, Raul Gonzalez wrote:
Acabo de comprarme el grabador de CD, y hablando con un amigo se nos
ocurrió la idea de poner el kernel en un cd para poder arrancar más
rapidillo que desde diskette (paso de lilo que si no papi se queja...) Y
comentando más la cosa llegamos a
Guenas
On Sat, Jan 08, 2000 at 11:53:40AM +0100, Manel Marin wrote:
¿Tiene squid, estando offline, la posibilidad de marcar para bajar paginas de
internet y bajarlas en una conexión determinada (y en otras no)?
En lo que lo he usado, no.
Me explico: mi PC ATX se enciende solito de madrugada se
No me funciona bien la conversión de un fuente a RTF. Con sgml2rtf uso las
opciones -c latin y -l es; no da mensajes de error en el proceso, pero cuando
quiero abrir el archivo resultante, no aparacen los caracteres españoles: ni
tildes ni eñes. En su lugar [ntilde] o [aacute]...
¿Me podríais
1º En la web de Debian puedes BUSCAR PAQUETES por NOMBRE. Esto es lo que
he encontrado sobre less, espero que te sirva de ayuda.
Package: less 332-4.1
A file pager program, similar to more(1)
Less is a program similar to more (1), but which allows backward movement
in the file as well as
Guenas
On Mon, Jan 10, 2000 at 01:19:39PM +0100, Miguel Angel Ordoñez Moya wrote:
Me he recogido un disco duro de 250Mb que voy a instalar junto a uno de
300Mb así podré reinstalar debian eligiendo una selección de paquetes
(tipo Workstation, ...), pero ¿como reparto los paquetes entre ambos
At 08:33 AM 2000-01-10 +0100, Tejada Lacaci, Antonio wrote:
[...]
Respecto a lo que tienes que meter en la imagen del diskette, léete
el bootdisk howto, ahí lo explica todo todito.
O echarle una miradita a los boot-floppies de Debian. Los de potato
ya están casi listos (por lo menos se puede
On Mon, Jan 10, 2000 at 10:51:28AM +0100, Antonio Castro wrote:
Existe una versi?n comercial de eso. Concretamente de SuSE as? que la
respuesta es que si es posible. Estar?a muy bien es que Debian tuviera
algo as?.
Ummm... no estoy seguro, pero por ahí han comentado que Corel Linux
Bien... he perdido el mail original con la pregunta sobre los problemas de
converion de SGML a RTF...
A ver con esto: los codigos (segun el abiword) en RTF para eñes y acentuadas
serian para:
ñ á é í ó ú Ñ Á É Í Ó Ú
\'f1 \'e1 \'e9 \'ed \'f3 \'fa \'d1 \'c1 \'c9 \'cd \'d3 \'da
En el
G'day all,
I am having some problems with the new network setup at work.
The powers that be have passed on internet costs to individual sections
anin order tinforce this have added a password/username authentication
to the web proxy. My problem is how do I get apt-get to use my usend
On Mon, 10 Jan 2000, Gareth wrote:
I havtried to use a line like this in the apt.conf
http::username:[EMAIL PROTECTED]:port
but nothing seemed to happen.
You used the wrong syntax..
acquire::http::proxy http://username:[EMAIL PROTECTED]:port;
Jason
Why on Earth would u want to???
unless u have a really, really good reason to, don't bother and just have the
one superuser. the more superusers u have the more of a security risk you
create since it makes available more priveleged accounts for malicious users
to hack and do whatever they please
Robert Marlow (2) [EMAIL PROTECTED] writes:
Why on Earth would u want to???
Well, I have two superuser accounts on my system: root with default
shell bash, and toor with default shell sh. This is very common
usage on BSD systems -- if bash becomes corrupted or inaccessible, you
can login with
On Sun, 9 Jan 2000, aphro wrote:
however unlikely did you try setting the date back before the year2000
? one of my friend's computers had a similar problem(although not as
severe) and when he set the clock back it was ok, i have a
486DX4-100(rather new ~1995) and sofar it hasnt experienced
Hello:
I'm new to Debian but really like the idea of the distribution and am
trying hard to make things work. One thing I find especially troublesome
is that the wuftpd that can be installed to slink is a version with a DOS
vulnerability that has been published for almost a year. I found a
john smith wrote:
Hello!,
I wanted to install sawmill with slink.when I checked their website, it
instructed me that it needs librep, rep-gtk,gtk and imlib so I downloaded
some of those and then when I tried to install the first one rep-gtk , it
said that it depended on libglib1.2.6 but
Arcady Genkin writes:
Well, I have two superuser accounts on my system: root with default shell
bash, and toor with default shell sh.
...
IIRC, bash is almost always dynamically linked, while sh is statically
linked.
lrwxrwxrwx1 root root4 Nov 6 19:39 /bin/sh - bash
It sounds like a strange ATX problem to me. I had similar things happen
before. For
whatever reason the switch on my computer doesn't work to power it up.
My switch does seem to be working. The power stays on and everything, but
it's just
that the computer doesn't seem to be doing what the
John Hasler [EMAIL PROTECTED] writes:
lrwxrwxrwx1 root root4 Nov 6 19:39 /bin/sh - bash
Geez! Thanks for pointing this out, I had no idea. I wonder what would
be the rationale for not including a standard sh in a distro... 8-/
Make 'sash' toor's shell.
Done. Thanks for
Brian Servis writes:
If sh - ash and 'things break' then those 'things' should call bash or
whatever shell explicitly, and a bug report should be filed against that
'thing' .
Yes, of course. However, the gentleman's goal appears to be improved
robustness, not Debian debugging.
I have had sh
On 10/1/2000 Brian May wrote:
However, I see you are now correct. Now data is written to the disk
almost immediately (1 second delay) after it is dirty. This means the
developers have put the safety of the disk ahead of performance
issues...
this is not necessarily the case, from my tests
On Sun, 9 Jan 2000, Patrick Kirk wrote:
I need to add a second superuser.
No you don't.
If you want someone else to have root access, then just give them the root
password.
If you want someone else to be able to do some root tasks but not really
be root, you have two choices.
1) Make the
On Sun, Jan 09, 2000 at 09:47:44PM -0600, ktb wrote:
I'm looking into buying a computer with either a 366 or 400MHz Celeron
processor. It has an L2 cache size of 128 Kb. I've read somewhere that
an L2 cache under something like 512 kb, will slow down your computer if
there is more than 64 MB
On Sun, 9 Jan 2000, George Bonser wrote:
There is no policy for ensuring that the Packages file on 63.209.15.252
matches the files on 207.69.194.216 so failures are frequent. To avoid the
Actually 63.209.15.252 recently had some sort of mirroring problem, it
should be fixed now. Otherwise the
k == ktb [EMAIL PROTECTED] writes:
k I'm looking into buying a computer with either a 366 or 400MHz Celeron
k processor. It has an L2 cache size of 128 Kb. I've read somewhere that
k an L2 cache under something like 512 kb, will slow down your computer if
k there is more than 64 MB of RAM
What is utility of identd daemon?
Also, is it normail that it restarts once every five minutes or more
often?
,[ flom logs ]
| [ ... ]
| Jan 9 23:09:28 tea identd[14851]: started
| Jan 9 23:14:36 tea identd[14938]: started
| Jan 9 23:19:44 tea identd[14965]: started
| Jan 9 23:24:52 tea
Isn't the 8390 module needed as well? Try to insmod it before the ne module.
I am trying to install the latest potato
I have an ISA NE2000 clone. it worked fine when i booted from the
rescue disc. Ieben installed the base system over NFS. It's IO is at
0x280, and
On Sun, 9 Jan 2000, ktb wrote:
processor. It has an L2 cache size of 128 Kb. I've read somewhere
that an L2 cache under something like 512 kb, will slow down your
computer if there is more than 64 MB of RAM added. On the other hand
Ancient problem. Only afflicts Pentiums under about 200
A long time ago, in a galaxy far, far way, someone said...
I'm looking into buying a computer with either a 366 or 400MHz Celeron
processor. It has an L2 cache size of 128 Kb. I've read somewhere that
an L2 cache under something like 512 kb, will slow down your computer if
there is more
On Sun, 9 Jan 2000, Carl Fink wrote:
: Has anyone else noticed that the main (US) Debian servers have been
: remarkably slow lately? Both trying to use the web site, and
: ftp.debian.org for apt.
The web site is on a different server altogether as far as I know.
: I've switched apt to a
On Sun, 9 Jan 2000, George Bonser wrote:
: On Sun, 9 Jan 2000, Carl Fink wrote:
:
: Has anyone else noticed that the main (US) Debian servers have been
: remarkably slow lately? Both trying to use the web site, and
: ftp.debian.org for apt.
:
: I've switched apt to a mirror, but
On Sun, Jan 09, 2000 at 05:17:36PM -0800, Mike Z. wrote:
All I really need is an ftp server (I like wu for various reasons) on a
stable system. Why is it that simply upgrading the ftpd would throw my
setup into an 'unstable' version? Is this likely to be a problem whenever
I install
At 06:34 PM 1/9/00 -0500, Jim B wrote:
OK another issue I'm having with setting resource limits. How can I
[snip]
I look in my /etc/limits and see a way to restrict just about all those
[snip]
Where can I find more info on /etc/limits ?
Regards,
Onno
Should be in your limits man page.
If you're running potato then you'd probably want to use PAM and
/etc/security/limits.conf instead.
Look at the files themselves to see how they are set up.
On Mon, 10 Jan 2000, Onno Ebbinge wrote:
At 06:34 PM 1/9/00 -0500, Jim B wrote:
OK another issue
in slink its in nfs-server ..
if you need it you could prob grab it from there ..
nate
On Sun, 9 Jan 2000, Joseph Heenan wrote:
joseph None of my systems (all running unstable) have a man page for
joseph /etc/exports - am I missing a package somewhere, or is this a bug? I
joseph expected it to
oh, thought u said u were on a 486 ..thats why i suggested that :)
nate
On Sun, 9 Jan 2000, Bart Szyszka wrote:
barts
barts
barts On Sun, 9 Jan 2000, aphro wrote:
barts
barts however unlikely did you try setting the date back before the year2000
barts ? one of my friend's computers had a
Just transferred over from Red Hat 6.1 to Debian 2.1. My NIC card worked
fine in Red Hat and appears to work okay in Debian _if_ I issue an
ifconfig eth0
command. Naturally, though, I'd like this to happen on boot. I have the
appropriate lines in conf.modules, but I have a feeling there is some
you should have no problems, i cant imagine where you read that..
i am running 466 celerons with 256MB ram, and its _quite_ fast. it may be
true that not all of the memory is cached(i can't say wether it is or
not). On older i430TX boards(i have one) they could not cache memory
beyond 64MB, i
Okay, my mouse (a Logitech 3 button mouse, new) seems to work fine in X,
and I know that it is connected to /dev/ttyS0. However, when I issue a gpm
command, I get
gpm: freopen(stderr) failed
I've run the gpm config program many times, and the gpm config file
appears to be built properly. In any
I'm very sorry but I have to do this test.
One of my email filter failed and I have to
see if they work properly now.
I hope you understand...
Regards,
Onno
You can put:
ifconfig eth0 ip netmask netmask
into /etc/init.d/network .
You will probably also have to add your route line in there as well.
On Mon, 10 Jan 2000, Paul M. Foster wrote:
Just transferred over from Red Hat 6.1 to Debian 2.1. My NIC card worked
fine in Red Hat and appears
I'm very sorry but I have to do this test.
One of my email filter failed and I have to
see if they work properly now.
I hope you understand...
Regards,
Onno
it returns the userid of the process, really the only thing that is
popular and needs identd is if you use IRC. identd can also be used in
combonation with tcp_wrappers to allow/deny certain users, although it is
not that secure, ident can easily be spoofed.
nate
On 9 Jan 2000, Arcady Genkin
Hello:
I know this is not Debian specific, but I was hoping some kind
person would help me...
I just put together a new AMD Athlon based system. Here's my
configuration: 600 Mhz Athlon, MSI mother board, 128M ECC memory,
3dFx Voodoo3 3000 AGP video, Toshiba ATAPI DVD drive,
when i want to change network settings to take effect everytime it boots i
edit /etc/init.d/network
hope you enjoy debian, ive played with a few rh boxes and they about drove
me mad.
nate
On Mon, 10 Jan 2000, Paul M. Foster wrote:
paulf
paulf Just transferred over from Red Hat 6.1 to Debian
I've got an AOpen PT75 II card that I tried to set up under X. It has an
86C385 chip on it. I tried S3V, SVGA and VGA16 servers, I tried
autoprobing it, specifying the chipset, calling it a generic VGA, etc. In
almost all cases, X windows worked fine, but when I came out of X windows
to a
I'm having problems booting into a fresh installation of potato in my
second harddrive. The installation is on /dev/hdc with root in
/dev/hdc1.
Lilo displays LI and dies there. I tried adding linear to
lilo.conf (that helped me once on another computer), but that didn't
help. My setup looks sane
What is the default fixed font used with X?
james
You did run /sbin/lilo after making *any* edits to your lilo.conf right?
Also, how had you booted when you were making those edits? If /dev/hdc1
was not your root partition at the time (for example, if you had booted
off a floppy), I wonder if the wrong lilo.conf was read to write your
boot
from what i've read DVD on linux requires hardware playback to work, i
read in a mailing list that some people were starting to get the G400
cards working.
see:
http://linuxvideo.org/
the linux video and dvd project ..
nate
On Mon, 10 Jan 2000, Ryan Losh wrote:
rklosh Hello:
rklosh I
Jim B [EMAIL PROTECTED] writes:
You did run /sbin/lilo after making *any* edits to your lilo.conf right?
Yes, I did.
Also, how had you booted when you were making those edits? If /dev/hdc1
was not your root partition at the time (for example, if you had booted
off a floppy), I wonder if
Anyone else is experiencing this problem? Here are the messages that X
gives me at startup
_FontTransSocketUNIXConnect: Can't connect: errno = 2
failed to set default font path
When I was playing with xfs, I never could get local unix sockets to
work vis-a-vis /unix:7100. However, it worked using tcp as
tcp/localhost:7100. xfs slows down the system though, so I went back
to direct path specification (don't use true type fonts).
--
On Sun, Jan 09, 2000 at 03:01:32PM +0100, Fam. Engelen wrote:
After having crashed my slink-with-a-bit-potato, the following appears on
boot:
---
/dev/hda5 contains a fs with errors, check forced.
/dev/hda5: Inode 87941 has illegal block(s).
UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
When starting iprofd I get the message:
Version of kernel modem-profile (5) does NOT match version of iprofd (4)!
Make sure, you are using the correct version.
(Try recompiling iprofd).
I'm using a 2.2.13 kernel on Debian 2.1
I guess iprofd in in the isdnutils package, I'm using version 3.0beta2
On 10/1/2000 Jim B wrote:
If you're running potato then you'd probably want to use PAM and
/etc/security/limits.conf instead.
Look at the files themselves to see how they are set up.
I have figured out how to set these limits up well enough, but I have
a related question, how can i set
Package: xterm
Version: 3.3.5-2
Package: fvwm
Version: 2.2.4-1
Does anybody else have instances in which the xterm icon insists to place
itself in a point that is already taken by some other icon? Perhaps it is
Netscape or exmh icons fault?
I am using Fvwm for WM.
- -- System Information
I think this mail didn't arrive when I send it last time, so here it is
again:
When starting iprofd I get the message:
Version of kernel modem-profile (5) does NOT match version of iprofd (4)!
Make sure, you are using the correct version.
(Try recompiling iprofd).
I'm using a 2.2.13 kernel on
I think this mail didn't arrive when I send it last time, so here it is
again:
When starting iprofd I get the message:
Version of kernel modem-profile (5) does NOT match version of iprofd (4)!
Make sure, you are using the correct version.
(Try recompiling iprofd).
I'm using a 2.2.13 kernel on
Subject: Re: /etc/limits
Date: Mon, Jan 10, 2000 at 07:26:19AM +0100
In reply to:Onno Ebbinge
Quoting Onno Ebbinge([EMAIL PROTECTED]):
| At 06:34 PM 1/9/00 -0500, Jim B wrote:
| OK another issue I'm having with setting resource limits. How can I
| [snip]
| I look in my
See the list of packages on the Debian packages page, searching for perl.
There is a fake package that allows you to upgrade; I believe you will have
upgrade problems if you do not install the fake perl package first. I believe
it is called perl-base.
It is called perl_5.004.05-2.deb
Stef
I installed the two fake packages perl-base_5.004.05-1.1.deb and
perl_5.004.05-2.deb. But still wehn I want to install
perl-5.005-base_5.005.03-4.1.deb I get the following error:
# dpkg -i perl-5.005-base_5.005.03-4.1.deb
dpkg: regarding perl-5.005-base_5.005.03-4.1.deb containing
Just transferred over from Red Hat 6.1 to Debian 2.1. My NIC card worked
fine in Red Hat and appears to work okay in Debian _if_ I issue an
ifconfig eth0
This is typically done in the script /etc/init.d/network That script is
generated at install when you answer the questions about your
ISDN won't work, I get the following messages in syslog, kern.log,
isdn.log, ppp.log, dmesg.
HiSax: debugging flags card 1 set to 4
isdn: Verbose-Level is 3
isdn: Global Mode running
isdn: Verbose-Level is 2
ippp, open, slot: 0, minor: 0, state:
ippp_ccp: allocating reset data structure
You might want to check /usr/doc/sysvinit/examples/network (from the sysvinit
package).
Just transferred over from Red Hat 6.1 to Debian 2.1. My NIC card worked
fine in Red Hat and appears to work okay in Debian _if_ I issue an
ifconfig eth0
command. Naturally, though, I'd like this to
heya, paul
have a look in /etc/init.d/network
from
da bobstopper
-Original Message
Just transferred over from Red Hat 6.1 to Debian 2.1. My NIC card worked
fine in Red Hat and appears to work okay in Debian _if_ I issue an
ifconfig eth0
command.
On 08-Jan-2000, Bryan Scaringe [EMAIL PROTECTED] wrote:
Lilo must be installed in the MBR of /dev/hda. That is where your BIOS
looks to boot your system. change your boot line to look like:
boot=/dev/hda
This will install LILO in the MBR of /dev/hda.
LILO can *boot* things pretty much
Attached is my /etc/lilo.conf. I hope it will help.
[14:46:02 /tmp]$ cat /etc/lilo.conf
# /etc/lilo.conf
boot=/dev/hda
compact
install=/boot/boot.b
map=/boot/map
vga=normal
prompt
timeout=50
other=/dev/hda1
label=MS
table=/dev/hda
image=/vmlinuz
label=Linux
A long time ago, in a galaxy far, far way, someone said...
I've got an AOpen PT75 II card that I tried to set up under X. It has an
86C385 chip on it. I tried S3V, SVGA and VGA16 servers, I tried
autoprobing it, specifying the chipset, calling it a generic VGA, etc. In
almost all cases, X
is ther a debian package for nisplus out already? i haven't seen it so
far an want to try it out...
gerhard
On Sat, Jan 08, 2000 at 09:17:05PM +0100, Robert Waldner wrote:
I find that sometimes I cannot use that interface after the network
is changed I get something like network unreachable when
I try to ping some hosts on that network. The NIC is fine after
a reboot. Most of the time I was
I found this file somewhere:
c---r- 1 8224 10280 49, 117 Dec 1 2031 fonts
Can anybody tell me what that c is all about???
This 'thing' is the reason for some trouble with apt / dpkg (something to
do with xlib6g-dev) perhaps this c has something to do with that.
Ron
Hi,
I have been playing with a DPT smartRaid V card for some
days, using the driver from their homepage. (the kernel
drivers don't seem to work for SmartRaid V?)
However, for some reason the Raid V drive doesn't seem
to perform very well. It often just stops during disk writes
without doing
* Phil Brutsche said:
capability does it mostly work (in this case, the X screen bulges outward
at the sides.
This is a fairly common card. I finally replaced it with an older Diamond
Stealth 3D 2000. But surely someone has had success setting it up?
There is nothing wrong with what
Quoting William T Wilson ([EMAIL PROTECTED]):
On Fri, 7 Jan 2000, Jesse Jacobsen wrote:
So do the SCSI UMAX Scanners use a 50-pin connection?
Yes. (Wow, wasn't that a waste of bandwidth)
My UMAX Astra 1200S uses a DB25.
But the DB25 is functionally the same as 50-pin SCSI,
I have a Debian box which has been rock-solid in the three years I've
been using it. Currently it's slink with the 2.0.38 kernel
(custom-compiled) and just a few extras in /usr/local. No other OS.
Until recently it had just 32MB of RAM. I added 64 more on
Saturday. Everything seemed fine to
LILO can only boot Opertive Systems located in primary partitions
(max 4) and located in the first hard drive that usually is /dev/hda .
Bye bye.
-- Memo - Header ---
To: Bryan Scaringe [EMAIL PROTECTED]
cc: Arcady Genkin [EMAIL PROTECTED]
On 10/1/2000 Ron Rademaker wrote:
c---r- 1 8224 10280 49, 117 Dec 1 2031 fonts
Can anybody tell me what that c is all about???
This 'thing' is the reason for some trouble with apt / dpkg (something to
do with xlib6g-dev) perhaps this c has something to do with that.
the c
Ron Rademaker wrote:
I found this file somewhere:
c---r- 1 8224 10280 49, 117 Dec 1 2031 fonts
Can anybody tell me what that c is all about???
This 'thing' is the reason for some trouble with apt / dpkg (something to
do with xlib6g-dev) perhaps this c has something to
*- On 10 Jan, Ron Rademaker wrote about What is this
I found this file somewhere:
c---r- 1 8224 10280 49, 117 Dec 1 2031 fonts
Can anybody tell me what that c is all about???
This 'thing' is the reason for some trouble with apt / dpkg (something to
do with
I found this file somewhere:
c---r- 1 8224 10280 49, 117 Dec 1 2031 fonts
Can anybody tell me what that c is all about???
The c means that it is a character device, e.g. like /dev/tty or
/dev/psmouse. However, since the group and user owners of the file seem
unknown
A better instruction would be to umount /dev/cdrom,
since this will almost always be a symlink pointing to
your cdrom device. Far more systems use /dev/cdrom
for their cdrom devices than use /dev/hdd, because
this includes nearly everybody with /dev/hdd,
/dev/sdd, /dev/hdsomeotherletter and
hello
thanks for reading this mail
which sound controller must i choose in the kernel configuration for
making work the following notebook ?
Texas Instruments 5300
which has a:
Media Vision Pro Audio De Luxe/ProSonic/Jazz 16 sound card
i pressume that the sound controller is
*- On 10 Jan, [EMAIL PROTECTED] wrote about memories
I have a Debian box which has been rock-solid in the three years I've
been using it. Currently it's slink with the 2.0.38 kernel
(custom-compiled) and just a few extras in /usr/local. No other OS.
Until recently it had just 32MB of RAM.
[EMAIL PROTECTED] writes:
I have a Debian box which has been rock-solid in the three years I've
been using it. Currently it's slink with the 2.0.38 kernel
(custom-compiled) and just a few extras in /usr/local. No other OS.
Until recently it had just 32MB of RAM. I added 64 more on
Saturday.
[EMAIL PROTECTED] wrote:
LILO can only boot Opertive Systems located in primary partitions
(max 4) and located in the first hard drive that usually is /dev/hda .
Bye bye.
This is not correct as stated.
Here is an informative item :
http://www.heise.de/ct/english/99/12/166/
I quote a
What kind of training does Debian offer and at what cost?
Thanks,
JoHanna
Thank you,
Succeded. And with xf86config also
inserted mouse default as
/dev/psaux
after that - it works perfectly :-)
At 2000.01.09 14:32:00, you wrote:
|{.f|. wrote:
Can't configure my 2 buttons PS/2
mouse for X windows.
In XF96Config file pointer
is set to PS/2.
Tried with
Go into your cpu and check all the ribbon cable connections.
Push each one in to insure it is tight. Just one loose connection
can keep your system from taking its first breath.
On Sun, 9 Jan 2000, Bart Szyszka wrote:
Hi,
I've been having problems in both Debian and Windows,
so I'm not
I asked myself the same question, so I logged into my shell account at a
local ISP and took a look at what they use on their FreeBSD machine with
512 MB of RAM:
core file size (blocks) unlimited
data seg size (kbytes) 22528
file size (blocks) unlimited
max locked memory
1 - 100 of 144 matches
Mail list logo
