info on either appreciated.
Oh and while I have your attention a reminder that I posted a video to Youtube
showing my P3 during the ANZA Net,
see : http://www.youtube.com/watch?v=aiUUO1pzM0k
Cheers for now and vry 73 to all
Peter ZL1PWD
K3#139
P3#33
with
KI6KFB (Kentucky Fried Bannanas) as net control
Notice the width and strength of the Chinese OTHR signal which was still there
at 07.00z.
vry 73
Peter ZL1PWD
K3#139
P3#33
__
Elecraft mailing list
Home: http://mailman.qth.net
side.Its like there was a fault in the press that was used to make the cutout.
4/ I notice a red light flashing at about 50-60 hz from the underside thru a
join in the steel panels.
Any thoughts?
vry 73
Peter ZL1PWD
K3 #139
__
Elecraft
Can we have regular updates from attendees as to what is new,whats upgraded
etc and all the scuttlebut!!!
P3 delivery would also be good as would updates on the KPA 500!!
Enjoy Dayton
vry 73
Peter ZL1PWD
K3#139
.
To sumamrise:
K3 with 13 khz filter at #1 pos and 2.7 at #2
KRX3 with 2.7 khz filter at # 1 pos
KDVR also installed
I can confirm that the lineout level was FB before the latest hardware upgrades.
Any and all help very much appreciated.
Peter ZL1PWD
K3#139
help via the list [digest] or direct (peterdatigrindotcodotnz) tnx
vry much
Peter ZL1PWD
K3#139___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc
Seasons greetings from ZL,
I have just upgraded to the 2nd RX and DVR and now get very little signal
showing on the MixW waterfall. Not sure if there is a connection
Using the latest FW and Menu item MIC SEL = LINE IN
Config Item LIN OUT=3
Any thoughts??
TIA and 73
Peter ZL1PWD
K3
Hi all,
I have had a query from a friend Bob ZL1VJ who has no tx on ssb in his K2.
It has rx on ssb and works fb on cw,both tx and rx.
This set was purchased from Ron ZL1TW not long before he became SK so our usual
guru in ZL in not available and any advice appreciated.
vry 73
Peter ZL1PWD
Is the mail-archive server down or has my link gone bad?
It's just that I notice the last listing is dated May 25 0!!
73
Peter ZL1PWD
K3#139
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
..
It WILL be operator error I am sure so just need some insight as to where to go
from here.
Any info appreciated
vry 73
Peter ZL1PWD
K3#139
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
Never mind Julian, I am sure there is counselling available under the NHS :)
:)
Peter Zl1PWD
K3#139
G4ILO wrote:
Gary Krause wrote:
I run 5 to 10 watts on my K2 all the time.
So have I for the last 9 years. And my K3 for the last 4 months. But with
the current state
power to about 20 watts.
I agree with other posters who have commented on being able to load memories
via the com port and with different configurations loaded it would be possible
to have unlimited memories over all portions of the HF spectrum.
Just a couple of thoughts from ZL
73
Peter ZL1PWD
UPDATE
Funeral Details :
Morris and Morris Funeral Directors
199 Kamo Road
Whangarei
Thursday 1.30 pm 7th February (NZDT)
Any messages and cards should be sent to:
Willcocks family
35 Puriri St,
Kamo
Whangarei 0112
NEW ZEALAND
Peter ZL1PWD
and
overseas.
Will keep you posted re funeral arrangements etc.
Peter ZL1PWD dit dit
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
Hi all,
I have just worked WA6CDR/MM 7080 on MV/Braveheart which is on it's way to VP6
Ducie Is.
Rob said I was the second K3 he had worked this evening, he was using #395
Cheers and 73
Peter ZL1PWD
K3#139
___
Elecraft mailing list
Post
Hi Stan,
I can confirm the k3 cabinet color is All Black as in the New Zealand rugby
football team!!
Cheers for now and take care
Peter ZL1PWD
K3#139
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
That's a bit low Simon!!
Cheers for now
Peter ZL1PWD
K3#139
It sure is a great radio
- Original Message -
From: Simon Brown (HB9DRV) [EMAIL PROTECTED]
To: Peter ZL1PWD [EMAIL PROTECTED]; elecraft@mailman.qth.net
Sent: Tuesday, January 08, 2008 9:28 PM
Subject: Re: [Elecraft] K3
. Make sure you use the MENU option MIC SEL and choose
Line In.
In this setup CMP is locked at zero (you need the current FW from the
website). And MIC will control the output level.
As you can see it was again a very simple solution..
Many thanks and a Happy New Year to all.
Peter
ZL1PWD
K3#139
and HNY
Peter ZL1PWD
K3#139
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
to K3 qso!!
Cheers for now and HNY
Peter ZL1PWD
K3#139
Phil Holliday wrote:
I was delighted to receive my K3 s/n 138 here in the Land of the Long
White
Cloud recently. Here are some notes for anyone else in ZL who is waiting
for their shipment to clear NZ Customs.
'snip
???
Peter ZL1PWD
K3 #0139
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
Hi all,
I have just had the word of the coming dispatch of my K3 in7 to 10 days
PTL and all that; YEESS
I may have a project over the holiday season!!
BTW it was ordered May 2
Cheers for now and 73
Peter ZL1PWD
___
Elecraft
22 matches
Mail list logo