Thanks Tom, interesting to know.
*When troubleshooting it would still be of great help to know how the KX2
encoder is connected to the main bord - plugged in or soldered?*
73,
Heinz HB9BCB
Tommy wrote
> I have seen the same on my KX2, while dialing it seems to freeze at
> times for a second
Eric/Wayne,
Has there been any work done for a potential dedicated remote antenna tuner?
A remote tuner that could handle 500 or 1500 watts to match up with amps power
wise (Or just a barefoot K3/K4). Maybe a black box between the LAN on the K4 or
ACC on the K3 so control signals could be sent
All encoders in the KX2 are soldered you the control panel board.
73,
Lyle KK7P
Sent from my iPhone
> On Apr 19, 2020, at 3:57 AM, Heinz Baertschi
> wrote:
>
>
> Thanks Tom, interesting to know.
>
> *When troubleshooting it would still be of great help to know how the KX2
> encoder is co
Hi Rich,
I totally agree with your last statement about the tuner placement.
I can't answer for Eric and Wayne and I am sure they will chime in in due
time. I haven't heard of any plans to introduce a weatherproofed version of
any of their tuners.
But the KAT500 is very easy to remote control an
Rich -
" I’m a firm believer in 50 ohm matched antennas, but if a tuner is required it
needs to be at the feed point."
While I prefer unmatched antennas fed with very low loss ladder line, I have
always felt the tuner should be at the feedpoint of that line. When I added
the KPA500, I s
As we all await the arrival of the K-4, I'm wondering if the radio will
"remember" all of the settings per band. Specifically, I use different RF
settings per band and have to remember to reset the RF as I go from 160 to
20, for example. Will these settings and AF gain, etc be recalled per band?
W
Hi,
This doesn't sound like an encoder problem to me. Encoders have no memory,
so if the radio eventually responds to the encoder pulses and displays the
correct frequency after a delay, that delay must have occurred in the
microcontroller itself or possibly in the display module if it is an
"inte
Wayne,
In these times of lockdown some of us are buoyed up with the prospect of
the new K4. Well some of the fortunate who are waiting for early
delivery.It is a bit like waiting for Santa as a kid. When a toy
catalogue came in the door I devoured it; well maybe these catalogues are a
I can hear the ATU in my KX-2 running when the ATU button is pushed but it is
not changing the SWR. An Elecraft T1 works and lowers the SWR. Any thoughts or
is this a mail-in repair solution?
73 - Peter - VE3HG
__
Elecraft mailing list
Hi All - wondering if any of you KX2 (or even KX3) owners have built and are
using the W9RAN "Versatile T/R Switch for SDRs and Vintage Radios” featured on
page 30 of the December 2018 issue of QST?
I enjoy the P3 that I use with my K3 and sure miss “seeing” the band when I use
the little QRP
Sorry, if someone mentioned this, but the original KUSB uses a Prolific chipset.
That’s always been temperamental. Plugable.com have drivers for 10.15.3 but you
have to buy them and I haven’t tried them.
73 de David, M0XDF
The difference between genius and stupidity is that genius has its limits.
Anxiously awaiting it. There was promises of more and frequent conversation
unless I am mistaken. I paid for it in full and am not going to cancel it but
would like more information
Thank youWB8PKK
Sent from Yahoo Mail on Android
On Sun, Apr 19, 2020 at 1:09 PM, Doug Turnbull wrote:
On 4/19/2020 8:51 AM, ab2tc wrote:
I totally agree with your last statement about the tuner placement.
The importance of a tuner being at the feedpoint depends entirely on the
antenna, the frequency(ies), and the feedline. The lower the operating
frequency, and lower the feedline loss charact
Yes getting some more info would be great. I have been bugging the boys
at Elecraft for an electronic copy of the manual, but nothing yet. I
have all the cabling done and a spot cleared on the desk beside my
KPA1500 for either my K4D or K4HD, I too have paid the full amount and
just waiting for
I don't think that's actually true in most cases. For example, a load
of 35 - j45 gives a 3:1 SWR at the load for 50 ohm coax, and the
additional line loss at 14 MHz due to SWR over 200 feet of LMR-400
(moderate cost) is about 0.5 dB.
In most cases with typical antennas and decent feedline,
Why? Specifically (numbers please), what would it gain you that would
be cost effective versus other alternatives?
73,
Dave AB7E
On 4/19/2020 8:52 AM, Lyn Norstad wrote:
That being said, a “remote” version of the KAT500 (or a KAT1500) would be of
immense interest to me – so I will fo
Hello Mike and friends,
Well you are not in the EU and do not need to wait for CE approval.
The start of this process can only begin as I understand with a production
model.Until CE approval is obtained Elecraft can not shirt to the EU.
I am not complaining about EI being in the EU but am
And, how will I be able to interface CW Skimmer for contesting? Will there
be a I&Q output available in MME format as there will be no IF.
73,
Barry
K3NDM
On Sun, Apr 19, 2020, 12:37 PM Art Suberbielle wrote:
> As we all await the arrival of the K-4, I'm wondering if the radio will
> "remember"
>In the meantime I guess we will have to wait and stare at pictures of
the K4 Front panel.
While anxiously waiting in line for the KPA500 to be released, I printed out a
picture of the front panel
of the '500, cut it out and placed it on the shelf where the '500 would go.
Then I could pretend
Ralph -
I love that story. When I was in high school I saw a full page photo of the
Hallicrafters SX-101A in CQ Magazine. I cut out that photo and had it taped
to my desk while I finished saving for that beast of a receiver.
Dave - K9FN
On Sun, Apr 19, 2020 at 2:46 PM Ralph Parker wrote:
> >I
Wayne et all
My only concern before I order a K4 is how it will work with two high power
AM transmitters near me.
10KW day,1kw night KVOI south of me and a 50kw day only KUAT AM north of me.
At some time, I will need to borrow or rent a k4 for a week and see how it
behaves
The majority of my ope
Greetings from locked-down California I hope everyone, near and far, is
staying safe!
I thought I'd take a break from playing with the K4 and tweaking firmware to
give everyone a status report from the engineering side. (Eric has been keeping
everyone informed about how Elecraft has been af
This is definitely planned.
Wayne
> On Apr 19, 2020, at 11:41 AM, Barry LaZar wrote:
>
> And, how will I be able to interface CW Skimmer for contesting? Will there
> be a I&Q output available in MME format as there will be no IF.
>
> 73,
> Barry
> K3NDM
>
> On Sun, Apr 19, 2020, 12:37 PM Art
Thank you very much. More updates like this will make your bankers (those
that pre-ordered) feel a lot better. Please keep it up and Stay Safe!
Richard
*W7ZR* ex:5C5Z, CN2ZR, K2JSP, W6SBZ, W7KXR, K9ZIJ, W9KNF, W0KDF, W0MQU,
J68ZR, KC6ZR, PJ4/W7ZR, KH2,W7ZR, KH6/W7ZR, V31ZR, VK4AAZ, XE2DV
*Be j
When I read about the touch controls, I suddenly had an image in my mind of a
small touch tablet on the desk that had all the controls on it that were on the
K4 display.
Kind of a touch panel Kpod...
Jack BMW Motorcycles
Chuck KE9UW
c-haw...@illinois.edu
Sent from my iPad
> On Apr 19, 2020, at
Simpler yet, use an appropriate size (for your desk) tablet to manage the K4.
Then take that with you when you’re in another room, traveling, etc.
Rick NK7I
Smell Czech corruptions are inevitable
> On Apr 19, 2020, at 1:11 PM, hawley, charles j jr
> wrote:
>
> When I read about the touch
We already have this capability, too
Wayne
N6KR
> On Apr 19, 2020, at 1:10 PM, hawley, charles j jr
> wrote:
>
> When I read about the touch controls, I suddenly had an image in my mind of a
> small touch tablet on the desk that had all the controls on it that were on
> the K4 display.
You can get an AT-615B from Array Solutions now and do this. I put 10 in a club
station for our various wire arrays. They do everything you need.
BTW I disagree about this 50 Ohm antenna thing. In my world of commercial high
powered broadcasting 30 MHz and under, there are almost never resonant,
I agree. Match the antenna, whatever the Z may be, to the feed line. This is
most efficiently done at the antenna feed-point.
However with good loss coax on HF, matching at the transmitter end is easier
and less complex and less expensive.
Bob, K4TAX
Sent from my iPhone
> On Apr 19, 2
That was already demonstrated by Elecraft in what I believe was their
first video of the K4 in action at one of the trade shows. I'm sure you
can still find it on YouTube somewhere.
Dave AB7E
On 4/19/2020 1:10 PM, hawley, charles j jr wrote:
When I read about the touch controls, I sudde
Yep, got that experience last year at the Huntsville Hamfest. The K4 was being
controlled wirelessly from an iPad. Darn slick too.
Bob, K4TAX
Sent from my iPhone
> On Apr 19, 2020, at 4:43 PM, David Gilbert wrote:
>
>
> That was already demonstrated by Elecraft in what I believe was th
Hello all,
I use a remote for a 630M 60 ft vertical - more info on my web-site.
K5DNL dot com
73 Thanks Ken K5DNL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
At a “mere” $3K each, the AT-615B might be a great product, but is hardly what
I would call a universally accessible solution …
Grant NQ5T
> On Apr 19, 2020, at 5:13 PM, W2xj wrote:
>
> You can get an AT-615B from Array Solutions now and do this. I put 10 in a
> club station for our various
I will be the one that will ask ... I ASSUME it will also be accessed with
an Android tablet?
Paul Van Dyke .. KB9AVO
also on the early list
On Sun, Apr 19, 2020 at 5:47 PM Bob McGraw K4TAX
wrote:
> Yep, got that experience last year at the Huntsville Hamfest. The K4 was
> being controlled
you get what you pay for.
Sent from my iPad
> On Apr 19, 2020, at 5:58 PM, Grant Youngman wrote:
>
> At a “mere” $3K each, the AT-615B might be a great product, but is hardly
> what I would call a universally accessible solution …
>
> Grant NQ5T
>
>> On Apr 19, 2020, at 5:13 PM, W2xj wro
You might want to replace the bridge rectifier in that new 35A power supply.
Yep, right out of the box.
At some point, Astron started shipping RS-35A's with a 25A bridge
rectifier. They paralleled two out of four of the 25A diodes twice over
to make, supposedly, a pair of 50A diodes for center-
Dave -
Not as much for improved performance as to get the very annoying relay clatter
out of the shack, and back up into the attic where I don't have to listen to it.
73
Lyn, W0LEN
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net]
When you say 'blow' are you saying it short circuits internally or open
circuits internally due to the event ?
Adrian Fewster
On 20/4/20 8:07 am, Christopher Hoover wrote:
You might want to replace the bridge rectifier in that new 35A power supply.
Yep, right out of the box.
At some po
I am looking for good cond used KAT500 and KPA500
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:El
Hi,
I know nothing about BC transmitters and antennas but in our world of
amateur radio solid state transmitters it is imperative that the
transmission line presents a load close to 50 ohms resistive to the
transmitter. The transmitter doesn't care how this is accomplished as long
as it sees a goo
If the diode shorts, it Will cause excessive ripple from the half wave
rectification.
I suspect that the failure mode is an open causing the remaining diode
to carry the full current, which will cause its eventual failure.
In any case, paralleling two diodes without some form of resistance in
Regarding K4 Updates:
Chuck KE9UW has a good idea. What he is really suggesting is that the K4 be
remotely operated by an iPad with the K4 control panel replicated on the touch
screen. We know that Flex Radio has this with the 6400/6600 series. Will this
be available with the K4?
W9DBR
Sent
opens in my limited experience.
On Sun, Apr 19, 2020 at 4:26 PM Adrian wrote:
> When you say 'blow' are you saying it short circuits internally or open
> circuits internally due to the event ?
>
>
> Adrian Fewster
>
> On 20/4/20 8:07 am, Christopher Hoover wrote:
> > You might want to repla
What's a complete station? ;-)
/Rick N6XI
On Sun, Apr 19, 2020 at 11:46 AM Ralph Parker wrote:
>
> While anxiously waiting in line for the KPA500 to be released, I printed
> out a picture of the front panel
> of the '500, cut it out and placed it on the shelf where the '500 would
> go.
> *Then
Please don’t talk down to me or many other of us. I’ve been in this hobby for
over 60 years and I know how things worked both then and now.
To answer your question about broadcast, many systems consist of series fed
towers. In a practical world a tower presenting zero reactance is about 35 ohms
Hi Folks,
I was looking at the information on the Elecraft website regarding the K4
and its features and functions and either missed or could not find any
reference to a couple of items I wanted to know about. Specifically, I was
looking for confirmation of, or mention of, if the K4 has the same
Wayne & Crew,
Any granular details about the CW Keyer in the K4?
Any possibility of embedding WinKeyer platform?
CW Keying modes? Will you have Ultimatic, Ultimatic dit and Ultimatic dah
added as options?
73 - ki5io
Nolan Kienitz
Texas
-
73 - Nolan Kienitz, KI5IO
--
Sent from: ht
Iirc Eric's indicated it would have memory keyer/recorder, and ability to
save station config to a usb key for multiop convenience. Look for the
YouTube vid he recorded st the UK dealer a few months ago, think it was in
there.
Scott
AD6YT
On Sun, Apr 19, 2020, 7:29 PM B. wrote:
> Hi Folks,
>
>
> On Apr 19, 2020, at 7:28 PM, B. wrote:
>
> Hi Folks,
>
> I was looking at the information on the Elecraft website regarding the K4
> and its features and functions and either missed or could not find any
> reference to a couple of items I wanted to know about. Specifically, I was
> looking
> On Apr 19, 2020, at 7:47 PM, Nolan Kienitz wrote:
>
> Wayne & Crew,
>
> Any granular details about the CW Keyer in the K4?
>
> Any possibility of embedding WinKeyer platform?
This is certainly possible, but not currently in the works.
>
> CW Keying modes? Will you have Ultimatic, Ult
Or sometimes, just to get your attention, they will short out then
explosively go open with a bang. The is usually no doubt figuring out which
component is bad.
On Sun, Apr 19, 2020, 19:56 Christopher Hoover wrote:
> opens in my limited experience.
>
> On Sun, Apr 19, 2020 at 4:26 PM Adrian wro
I had a ham mention to me that this power supply blew up. He was somewhat
annoyed when I ask if anyone was injured in the explosion.
Folks, for us trying to assist with technical issues, please give complete and
accurate descriptions. You will get better answers.
Bob, K4TAX
Sent from my
Good Evening,
Twenty meters had more noise and QSB than did forty meters. It also
produced more check ins. After the twenty meter net I was surprised at
how quiet the background was on forty meters. I would rather have the
noise and not miss the signals.
Yard work seems to be the them
I took similar action: I took a screenshot of the downloaded K4 brochure and
had it put onto a mousepad. So now I have a K4 (mousepad) on my ham shack
desk.
73
Hoop K9QJS
On Sun, Apr 19, 2020 at 11:46 AM Ralph Parker wrote:
>
> While anxiously waiting in line for the KPA500 to be releas
I remember seeing Barbie Benton as the
Playboy centerfold. I tacked that in my
closet.
Posting that on my wish list never did
work...
73 :)
Gary
KA1J
> I took similar action: I took a screenshot of the downloaded K4
> brochure and had it put onto a mousepad. So now I have a K4
> (mousepad)
55 matches
Mail list logo