Hi everyone, today I turned on my K3 and I can't receive any signal in
any band.
Then I tried to tune and power out is 0.0w.
My k3 has two ksyn3a, but in the menu I see DDS FRQ and VCO MD; also
tapping DISP I see PLL1 and PLL2 (with value ranging from 2.9 to 3.1)
So it looks like the K3
Hi Petr, I have two ksyn installed, and both worked fine for some months.
I did not open my K3 in the last weeks, and two days ago my K3 was ok,
so this happened without touching anything.
An italian OM had another problem with a deprogrammed SYN. I wonder if
Elecraft is aware of this and
hello everyone,
I just compared my k3 with a friend's one and my IF out is much lower
than his k3.
I suspected it when listening on a softrock, but now I can see a
difference like 10 or 20db off.
So I inspected my k3 and the IF out connector is fine. Multimeter says 0
ohms between bnc
her output, and it is serial number 43XX.
73,
Art WB8ENE
On Thu, Apr 7, 2016 at 3:55 PM, Enrico Lorenzoni IU3AZC
<iu3...@gmail.com <mailto:iu3...@gmail.com>> wrote:
hello everyone,
I just compared my k3 with a friend's one and my IF out is much
lower than his k3.
Hi, I confirm: R8 is labeled "133", so it is a 13k resistor.
Enrico
Il 07/04/2016 22:10, Art Hejduk ha scritto:
Enrico,
Yours should definitely have this change done then. See the attached
PDF file.
73,
Art WB8ENE
On Thu, Apr 7, 2016 at 4:04 PM, Enrico Lorenzoni IU
Lorenzoni IU3AZC
Sent: Thursday, April 7, 2016 12:55 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] low IF out on K3
hello everyone,
I just compared my k3 with a friend's one and my IF out is much lower than
his k3.
I suspected it when listening on a softrock, but now I can see a difference
hello, today I just updated my k3 with the latest beta firmware, so I
could record monitor from line out.
But as soon as I applied the update, I started hearing a white noise in
my headphones. It is indipendent from AF level.
Could you please fix the firmware so I don't have to revert and loose
7 matches
Mail list logo