Hi
Is it possible to make create M code that corresponds to toque of the AC
servomotor?
Units of M300, for example, will be N*M/Lb*f.
At the beginning of program should be place to declare that M300 less
than 30lb*f (for example), and if it exceed than program switch to M0
program Stop.
That will
Ah ha, I remembered this from days long past, there is a command that
everyone can use to quickly learn vim, I do believe that the correct vim
is not installed by default on the current install set from the live cd,
I believe anapt-get install vim-common may do the trick, but the
command to
I agree with K Lerman. Don't mix logic and power.
Try a simple transformer and recifier for the brake power. Pretty
inexpensive
For logic (including limits, etc.) I use power supplies like this:
http://www.wolfautomation.com/Product.aspx?ProductID=21721
This is exactly what I use with my Mesa
It's generally NOT a good idea to power logic and high brakes from the
same supply. Actuating a brake can cause power surges that will
adversely affect your logic.
Ken
[EMAIL PROTECTED] wrote:
> Hi
> I have one AC servo motor IG 34 with power brake. To open that power brake
> I need 24V 1.5 amp
Hi
I have one AC servo motor IG 34 with power brake. To open that power brake
I need 24V 1.5 amp constant power. I searched and found that in the same
city where I am there are mfg. http://www.v-infinity.com/
There have very good price!
AC-DC converter 2-24 cost $43, but I want to buy power supply
On Mon, Jun 02, 2008 at 06:13:05PM +0200, jros wrote:
> I think a different aproach is
>
> sudo comp --install your_kin.c
>
> from EMC 2.1.7 and above.
>
> It compiles and installs in place (I think)
(sudo) comp --install should work for both run-installed and
run-in-place versions. The sudo
I think a different aproach is
sudo comp --install your_kin.c
from EMC 2.1.7 and above.
It compiles and installs in place (I think)
You can try, it works for us
Javier
El lun, 02-06-2008 a las 10:39 -0500, Charles Brauer escribió:
> Hi all- I am trying to compile and build the dipod, so I
Anders Wallin wrote:
> Hi all,
>
> Just wanted to let everyone know that we have now mounted an encoder on
> the spindle motor of our mill and with a little HAL-tweaking it was easy
> to get rigid tapping to work.
>
> There are two videos of M3 tapping and M6 tapping on youtube:
> http://www.an
Charles Brauer wrote:
> Hi all- I am trying to compile and build the dipod, so I placed the
> functions mentioned in the 'kematics document' keeping the file looking like
> tripod.c.
> Now what? How do I get emc to compile it? Is there a step-by-step proceedure
> for adding new files and getting em
Hi all- I am trying to compile and build the dipod, so I placed the
functions mentioned in the 'kematics document' keeping the file looking like
tripod.c.
Now what? How do I get emc to compile it? Is there a step-by-step proceedure
for adding new files and getting emc to comile them? Thanks. c brau
On Mon, Jun 02, 2008 at 02:46:19PM +, ben lipkowitz wrote:
>
> Actually, it's RS274 that's different for every manufacturer. RS274-NGC
> was an effort by NIST to clear up all the incompatibilities by saying,
> "look, here's how it should work, dammit" and EMC was the reference
> implementat
On Sun, 1 Jun 2008, Gary Fixler wrote:
> 2) NGC is different for every program that uses it. Everyone has their own
> implementation it would seem. I tried loading some of my EMC2 into a 3D
> visualizer for NGC, and it failed on just about everything. Reading NGC from
> other programs looks like a
500 RPM for tapping is really impressive in my point of view, my former
woking friend Correa couldn't do it at that speed even though it was
upgraded to a PC controller.
Regards,
Sven
2008/6/2 Anders Wallin <[EMAIL PROTECTED]>:
> > Cool, what kind of tweeking did you have to do with hal?
> > Joh
> Cool, what kind of tweeking did you have to do with hal?
> John
nothing special, just set up the spindle encoder so that
motion.spindle-revs increases by 1 when the spindle turns one
revolution, and connect the index-enable to the encoder counter.
setp m5i20.0.enc-03-scale 2000
net spindle-po
Cool, what kind of tweeking did you have to do with hal?
John
On 2 Jun 2008 at 8:39, Anders Wallin wrote:
> Hi all,
>
> Just wanted to let everyone know that we have now mounted an encoder
> on the spindle motor of our mill and with a little HAL-tweaking it was
> easy to get rigid tapping to wo
Thanks Geert,
How appropriate - I have to make two little handwheels today!!
--
Best wishes,
Ian
Ian W. Wright
Sheffield UK
"The difference between theory and practice is much smaller in theory than in
practice..."
--
Ian,
Example of while loop to make circular indents in the side of a handwheel/
DAMPER> cat 110_mill_grips.ngc
%
(mill grips on other side, 3/8mill=9.5mm, 12 deep)
(params)
#1=-15 (drill depth)
#2=10 (retraction interval)
#100=-12(depth)
(fixed)
(speed)
F80
(reset)
G0 Z5
G0 X0 Y0
G4 P5
17 matches
Mail list logo