On 2/20/2013 5:55 AM, Anton Shterenlikht wrote:
From feenb...@nber.org Wed Feb 20 13:39:28 2013
>From: Fleuriot Damien
>To: me...@bristol.ac.uk
>Subject: Re: cannot ssh into a box with DHCP assigned IP address
>Date: Wed, 20
hided by the AP (or by some other router more
> far away) behind a real IP addr. You can check what this addr is by
> going to the page http://myip.nl/
>
> And you can not SSH to the addr shown there, at least normally it would
> not
> be NAT'ed to yo
El día Wednesday, February 20, 2013 a las 03:43:43PM +0100, Matthias Apitz
escribió:
> El día Wednesday, February 20, 2013 a las 03:18:47PM +0100, Fleuriot Damien
> escribió:
>
> > > Well.. what should it be?
> > > I have on the problem box (ssh server):
> >
El día Wednesday, February 20, 2013 a las 03:18:47PM +0100, Fleuriot Damien
escribió:
> > Well.. what should it be?
> > I have on the problem box (ssh server):
> >
> > wlan0: flags=8943 metric 0
> > mtu 1
> > 500
> >ether 00:21:5c:50:6
e...@bristol.ac.uk
> > Subject: Re: cannot ssh into a box with DHCP assigned
IP address
> > Date: Wed, 20 Feb 2013 10:31:22 +0100
> > Cc: freebsd-questions@freebsd.org
> >
> > On Feb 2
On Feb 20, 2013, at 2:55 PM, Anton Shterenlikht wrote:
> From feenb...@nber.org Wed Feb 20 13:39:28 2013
>
> > From: Fleuriot Damien
> > To: me...@bristol.ac.uk
> > Subject: Re: cannot ssh into a box with DHCP assigned IP addr
From: Fleuriot Damien
To: me...@bristol.ac.uk
Subject: Re: cannot ssh into a box with DHCP assigned IP address
Date: Wed, 20 Feb 2013 10:31:22 +0100
Cc: freebsd-questions@freebsd.org
On Feb 20, 2013, at 10:28 AM, Anton Shterenlikht
wrote
From feenb...@nber.org Wed Feb 20 13:39:28 2013
> From: Fleuriot Damien
> To: me...@bristol.ac.uk
> Subject: Re: cannot ssh into a box with DHCP assigned IP address
> Date: Wed, 20 Feb 2013 10:31:22 +0100
>
From m...@my.gd Wed Feb 20 10:28:54 2013
Ok I think you've got a DNS resolution problem here,
so when you try to establish the connection,
SSHD tries to resolve your client's hostname.
It fails and times out, however your ssh login gracetime
Ok I think you've got a DNS resolution problem here, so when you try to
establish the connection, SSHD tries to resolve your client's hostname.
It fails and times out, however your ssh login gracetime is already over.
You have several options here:
1/ increase the login gra
From m...@my.gd Wed Feb 20 10:11:12 2013
Run this on your server:
tcpdump -ni wlan0 ip and port 22
Then try to ssh to the box,
see if SYN packets arrive,
see if your box sends SYN/ACK back.
172.21.220.12 is the ssh server
137.222.187.241 is the
On Feb 20, 2013, at 10:45 AM, Anton Shterenlikht wrote:
> From: Fleuriot Damien
> To: me...@bristol.ac.uk
> Subject: Re: cannot ssh into a box with DHCP assigned IP address
> Date: Wed, 20 Feb 2013 10:31:22 +0100
> Cc: freebsd-questions@freebsd.or
From: Fleuriot Damien
To: me...@bristol.ac.uk
Subject: Re: cannot ssh into a box with DHCP assigned IP address
Date: Wed, 20 Feb 2013 10:31:22 +0100
Cc: freebsd-questions@freebsd.org
On Feb 20, 2013, at 10:28 AM, Anton Shterenlikht
wrote
On Feb 20, 2013, at 10:28 AM, Anton Shterenlikht wrote:
> I have a laptop with FreeBSD -current,
> with ip address assigned via DHCP.
> The laptop has neither a static ip address,
> nor a domain.
>
> I can ping the laptop fine, but cannot
> ssh into it. The sshd is running
I have a laptop with FreeBSD -current,
with ip address assigned via DHCP.
The laptop has neither a static ip address,
nor a domain.
I can ping the laptop fine, but cannot
ssh into it. The sshd is running, /etc/ssh/ssd_config
seems fine, /etc/hosts.allow is fine.
However, /etc/hosts is just the
PM
To: Volodymyr Kostyrko
Cc: Erich Dollansky; questi...@freebsd.org; Mannase Nyathi
Subject: Re: SSH on FreeBSD
El dÃa Tuesday, January 15, 2013 a las 02:40:32PM +0200, Volodymyr Kostyrko
escribió:
> > In FreeBSD it is in rc.conf
> >
> > $ man rc.conf | col -b | fgrep -i ssh
&g
15.01.2013 14:48, Frank Staals:
Volodymyr Kostyrko writes:
In FreeBSD there are two ways of enabling sshd: default, fast and easy through
rc.conf and a bit tricky and secure via inetd.conf. Everyone can select their
own poison. I personally prefer the latter one.
You seem to imply that enab
On 15/01/2013 12:51, Matthias Apitz wrote:
Why it is more secure via inetd.conf?
You can centralise access control via TCP Wrappers -
http://www.freebsd.org/doc/handbook/tcpwrappers.html .
--
Bruce Cran
___
freebsd-questions@freebsd.org mailing lis
El día Tuesday, January 15, 2013 a las 02:40:32PM +0200, Volodymyr Kostyrko
escribió:
> > In FreeBSD it is in rc.conf
> >
> > $ man rc.conf | col -b | fgrep -i ssh
>
> In FreeBSD there are two ways of enabling sshd: default, fast and easy
> through rc.conf and
Volodymyr Kostyrko writes:
>
> In FreeBSD there are two ways of enabling sshd: default, fast and easy through
> rc.conf and a bit tricky and secure via inetd.conf. Everyone can select their
> own poison. I personally prefer the latter one.
You seem to imply that enabling sshd through inetd is
FreeBSD on my server. I would like to find out
how can I be able to login to it via ssh?
Looking forward to hear from you soon.
Thank you
you must enable ssh in /etc/inetd.conf and then read
In FreeBSD it is in rc.conf
$ man rc.conf | col -b | fgrep -i ssh
In FreeBSD there are two ways of
On Tue, 15 Jan 2013 10:52:04 +
Matthew Seaman articulated:
> On 15/01/2013 10:10, Mannase Nyathi wrote:
> > I have just configured FreeBSD on my server. I would like to find
> > out how can I be able to login to it via ssh?
>
> Start by editing /etc/rc.conf and add the l
> >
> > I have just configured FreeBSD on my server. I would like to find out
> > how can I be able to login to it via ssh?
> >
> > Looking forward to hear from you soon.
> >
> > Thank you
> >
>
> you must enable ssh in /etc/inetd.conf and th
root logins by
default. You can change that by editing /etc/ssh/sshd_config .
--
Bruce Cran
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"
On 15/01/2013 10:10, Mannase Nyathi wrote:
> I have just configured FreeBSD on my server. I would like to find out
> how can I be able to login to it via ssh?
Start by editing /etc/rc.conf and add the line:
sshd_enable="YES"
(anywhere in the file -- order doesn't matter)
T
Hi,
>> I have just configured FreeBSD on my server. I would like to find out
>> how can I be able to login to it via ssh?
>>
>> Looking forward to hear from you soon.
>>
>> Thank you
>>
>
> you must enable ssh in /etc/inetd.conf and then read
Or be
Hi,
On Tue, 15 Jan 2013 10:10:16 +
Mannase Nyathi wrote:
> CipherWave Fibre Broadband with FREE installation from only
> R8840/month
>
> Good day,
>
> I have just configured FreeBSD on my server. I would like to find out
> how can I be able to login to it via ssh?
&g
CipherWave Fibre Broadband with FREE installation from only R8840/month
Good day,
I have just configured FreeBSD on my server. I would like to find out how can I
be able to login to it via ssh?
Looking forward to hear from you soon.
Thank you
--
Mannase Nyathi
Support Technician
sb: 011 541
There are a number of keys involved in ssh. The host keys are used at
>the start of the connection to make sure that some other machine doesn't
>impersonate the one you wanted.
and
On Wed, Jan 2, 2013 at 2:22 PM, Polytropon wrote:
>The key received in the first step of a SSH sessio
On Tue, 1 Jan 2013 18:59:05 +0330, takCoder wrote:
> thank you for the details mentioned :)
>
> but now, a questions occurred to me about this ssh key.
> as i don't know enough about its process, would you please tell me whether
> this key is a shared key for all ssh client
Don't top-post, please.
takCoder writes:
> but now, a questions occurred to me about this ssh key.
> as i don't know enough about its process, would you please tell me whether
> this key is a shared key for all ssh clients who send a request? or it
> differs as the client
thank you for the details mentioned :)
but now, a questions occurred to me about this ssh key.
as i don't know enough about its process, would you please tell me whether
this key is a shared key for all ssh clients who send a request? or it
differs as the client changes?
(this question may
On Tue, 1 Jan 2013 14:11:21 +0330, takCoder wrote:
> everything is fine until i restart my nanoBSD server. the problem is that
> each time i restart my server, the source system is complaining about that
> i need to edit my known_hosts file cause my nanoBSD hash-code is not
> matched..
>
> how ca
>-- Forwarded message --
>From: Aldis Berjoza
>Date: Tue, Jan 1, 2013 at 2:17 PM
>Subject: Re: ssh server hashcode change on nanoBSD
>
>I've never used NanoBSD, but, check if ssh daemon can write to /etc/ssh/
otherwise it >won't be able to save ssh
On Fri, Nov 23, 2012 at 6:43 PM, Paul Kraus wrote:
> I am seeing very poor response time running the VitrualBox GUI via X11
> tunneled over SSH via the Internet. The issue _appears_ to be limited
> to the VBox GUI as Firefox is reasonable. I am well aware of the
> latency issues t
Paul Kraus writes:
> On Fri, Nov 23, 2012 at 4:31 PM, Lowell Gilbert
> wrote:
>
> Yup, I just have not had a chance to chase that one down, and
> given that it happens once per SSH session, has not been a high
> priority. I mentioned it in the spirit
On Fri, Nov 23, 2012 at 4:31 PM, Lowell Gilbert
wrote:
>> Observations:
>>
>> 1. When I first SSH into the box I see a long delay after the SSH
>> tunnel is setup before being prompted for a password, and I do not
>> know if this delay is related to the VBox issue.
Paul Kraus writes:
> I am seeing very poor response time running the VitrualBox GUI via X11
> tunneled over SSH via the Internet. The issue _appears_ to be limited
> to the VBox GUI as Firefox is reasonable. I am well aware of the
> latency issues tunneling X11 over SSH across the I
On Fri, Nov 23, 2012 at 1:01 PM, Adam Vande More wrote:
> On Fri, Nov 23, 2012 at 11:43 AM, Paul Kraus wrote:
>>
>> I am seeing very poor response time running the VitrualBox GUI via X11
>> tunneled over SSH via the Internet. The issue _appears_ to be limited
>> to
On Fri, Nov 23, 2012 at 11:43 AM, Paul Kraus wrote:
> I am seeing very poor response time running the VitrualBox GUI via X11
> tunneled over SSH via the Internet. The issue _appears_ to be limited
> to the VBox GUI as Firefox is reasonable. I am well aware of the
> latency issues t
I am seeing very poor response time running the VitrualBox GUI via X11
tunneled over SSH via the Internet. The issue _appears_ to be limited
to the VBox GUI as Firefox is reasonable. I am well aware of the
latency issues tunneling X11 over SSH across the Internet, but that is
what we are stuck
On 13 Apr 2012 at 23:51, Frank Staals wrote:
> "John McDonnell" writes:
>
> > All in all, creating an entry in Site Manager makes more sense if
> > it's something you connect to from your own hardware. From someone
> > else's machine, the quick connect is quite handy though.
>
> Don't forget to
"John McDonnell" writes:
> All in all, creating an entry in Site Manager makes more sense if it's
> something you connect to from your own hardware. From someone else's
> machine, the quick connect is quite handy though.
Don't forget to clear out the entry from the dropdown list then. Because
I
On 13 Apr 2012 at 9:21, John McDonnell wrote:
> > From: owner-freebsd-questi...@freebsd.org [mailto:owner-freebsd-
> > questi...@freebsd.org] On Behalf Of Dave B
>
> > FYI, you have to create an entry in FileZilla's Site Manager, for it
> > to invoke SFTP, the "Quickconnect" feature just uses pla
> From: owner-freebsd-questi...@freebsd.org [mailto:owner-freebsd-
> questi...@freebsd.org] On Behalf Of Dave B
> FYI, you have to create an entry in FileZilla's Site Manager, for it
> to invoke SFTP, the "Quickconnect" feature just uses plain vanilla FTP.
>
> Best Regards.
>
> Dave Baxter.
> I have a small FreeBSD 8.0 system (above, yes I know, not current,
> > but it works.) That is mainly used for timekeeping with an attached
> > PPS equipped GPS. No problems with that.
> >
> > It also has a small web server (Hiawatha) FTP server and SSH portal,
>
On 12 Apr 2012 at 9:32, Frank Staals wrote:
> "Dave B" writes:
>
> > Hi, ordinarily perhaps yes, if I could only figure out how to set it
> > up on the FreeBSD box. As always, the "Manuals" though no doubt
> > correct and complete as a "reference", are no good to people who
> > don't already kn
On 12 Apr 2012 at 11:28, Frank Bonnet wrote:
> > "Dave B" writes:
> >
> >> Hi, ordinarily perhaps yes, if I could only figure out how to set
> >> it up on the FreeBSD box. As always, the "Manuals" though no doubt
> >> correct and complete as a "reference", are no good to people who
> >> don't a
ere's a little-used PUT command, or you can use such things
as WEBDAV. Easy to run over TLS by using HTTPS.
* RSYNC -- has an anonymous mode which works fine for generic
downloads. For authenticated access defaults to ssh(1) for all
traffic.
* SFTP or SCP -- for those wh
why not ftp over TLS ? like proftpd or pure-ftpd can do ?
Envoyé de mon iPhone.
Le 12 avr. 2012 à 09:32, Frank Staals a écrit :
> "Dave B" writes:
>
>> Hi, ordinarily perhaps yes, if I could only figure out how to set it up
>> on the FreeBSD box. As always, the "Manuals" though no doubt co
"Dave B" writes:
> Hi, ordinarily perhaps yes, if I could only figure out how to set it up
> on the FreeBSD box. As always, the "Manuals" though no doubt correct and
> complete as a "reference", are no good to people who don't already know
> "How To" do it.
There is not much to set up. Just
On 11 Apr 2012 at 14:54, Mike Clarke wrote:
> On Wednesday 11 April 2012, Dave B wrote:
>
> > I just found however, that though I can reliably send a file to the
> > FTP server and it get's saved just fine, that's not true when
> > connecting this way using
timekeeping with an attached PPS equipped
GPS. No problems with that.
It also has a small web server (Hiawatha) FTP server and SSH portal, for
my own use.
The FTP "server" is the built-in OS based ftpd implementation, and works
well for all that I need.
Anyway... I found a while ago,
On Wed, Apr 11, 2012 at 8:54 AM, Mike Clarke
wrote:
> On Wednesday 11 April 2012, Dave B wrote:
>
>> I just found however, that though I can reliably send a file to the
>> FTP server and it get's saved just fine, that's not true when
>> connecting this way using
On Wednesday 11 April 2012, Dave B wrote:
> I just found however, that though I can reliably send a file to the
> FTP server and it get's saved just fine, that's not true when
> connecting this way using a SSH tunnel.
Would it not be simpler just to use sftp directly rather t
equipped
GPS. No problems with that.
It also has a small web server (Hiawatha) FTP server and SSH portal, for
my own use.
The FTP "server" is the built-in OS based ftpd implementation, and works
well for all that I need.
Anyway... I found a while ago, that I can tunnel connectio
On Mon, Mar 19, 2012 at 8:45 PM, Mark Felder wrote:
> Is the HPN patchset included with the base OpenSSH the full patchset? Does
> it include the threaded CTR patch? I can't seem to find a clear answer to
> this.
>
crypto/openssh/README.hpn references it so I would assume so.
--
Adam Vande Mo
Is the HPN patchset included with the base OpenSSH the full patchset? Does
it include the threaded CTR patch? I can't seem to find a clear answer to
this.
Thanks,
Mark
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailma
On Feb 8, 2012, at 11:39 AM, Henry Olyer wrote:
> Second, I am getting: inetd[1081]: ssh/tcp: bind: address already in use.
> What's the fix, please?
Don't try to run sshd via inetd when you're already starting it as a daemon.
, I have a pretty nice Fvwm environment with
some nifty plotting. (Though I wonder, is it better to be forced to
visualize the underlying curve's of a system without looking. A
philosophical problem for another day...)
Second, I am getting: inetd[1081]: ssh/tcp: bind: address already i
ss everything on loopback (lo0)
pass in quick on lo0 all
pass out quick on lo0 all
# block all badguys
table persist file "/var/db/ssh-bruteforce"
pass in log quick proto tcp from $whitelist to any port ssh
block in log quick proto tcp from to any port ssh
# setup a default deny policy
b
t on the test box. I had to set up the lan manually to
>>>> first get it up. Then you should be able to use ssh.
>>>
>>> I take it you either arranged for ssh to accept a direct root login,
>>> or added a non-root username. Does the new installer do one of
&g
On 1/6/2012 12:07 PM, Al Plant wrote:
per...@pluto.rain.com wrote:
Al Plant wrote:
I accessed the sshd from the new install screen as an option when
I loaded it on the test box. I had to set up the lan manually to
first get it up. Then you should be able to use ssh.
I take it you either
Peter Kryszkiewicz writes:
> I have several machines networked using NFS mounts or SSH and scp. Only one
> machine has internet connectivity - a laptop (machine vbear) with a wireless
> card (I'm in a temporary location for a few weeks and only wireless is
> available here).
>
I have several machines networked using NFS mounts or SSH and scp. Only one
machine has internet connectivity - a laptop (machine vbear) with a wireless
card (I'm in a temporary location for a few weeks and only wireless is
available here).
I tried to mount the ports tree on this machine t
> From owner-freebsd-questi...@freebsd.org Mon Sep 19 19:12:32 2011
> From: mer...@stonehenge.com (Randal L. Schwartz)
> To: Paul Macdonald
> Date: Mon, 19 Sep 2011 17:12:14 -0700
> Cc: James Strother , freebsd-questions@freebsd.org
> Subject: Re: limit number of ssh connectio
On Mon, Sep 19, 2011 at 05:11:28PM -0700, Randal L. Schwartz wrote:
> > "Григорьев" == Григорьев Александр writes:
>
> Григорьев> If your target is protect freebsd box from bruting passwords
> Григорьев> from inet maybe security/knockd will help you?
>
> Portknocking adds only a dozen bits o
>>>>> "Paul" == Paul Macdonald writes:
Paul> in my experience running ssh on a high port cuts the amount of unwanted
ssh
Paul> connections to approximately zero, in fact i got a surprise when seeing a
sec
Paul> log from a box which i hadn't done th
> "Григорьев" == Григорьев Александр writes:
Григорьев> If your target is protect freebsd box from bruting passwords
Григорьев> from inet maybe security/knockd will help you?
Portknocking adds only a dozen bits or so to your password. Do you
really think it helps to go from a 1024-bit key t
> Does anyone know a good way of limiting the number of ssh attempts
> from a single IP address?
>
> I found the following website, which describes a variety of approaches:
>
> http://www.freebsdwiki.net/index.php/Block_repeated_illegal_or_failed_SSH_logins
>
>
> B
Moving ssh to another port has solved the problem for me.
I had used sshguard in the past, but was always leery of locking myself out.
Regards,
Matt Emmerton
-Original Message-
From: owner-freebsd-questi...@freebsd.org
[mailto:owner-freebsd-questi...@freebsd.org] On Behalf Of James
On 9/19/2011 2:05 PM, James Strother wrote:
Does anyone know a good way of limiting the number of ssh attempts
from a single IP address?
I found the following website, which describes a variety of approaches:
http://www.freebsdwiki.net/index.php/Block_repeated_illegal_or_failed_SSH_logins
rs of unauthorized
login attempts. Everything so far is highly unsophisticated, but it
did make me start to really think about the issue. I might put ssh
onto a different port, that would at least stop the sort of fishing I
am currently seeing. It's not clear if that would be "good enough.&quo
орьев Александр :
>
>> If your target is protect freebsd box from bruting passwords from inet
>> maybe security/knockd will help you?
>>
>> 19.09.2011, 23:05, "James Strother" :
>>> Does anyone know a good way of limiting the number of ssh a
2011/9/19 Григорьев Александр :
If your target is protect freebsd box from bruting passwords from inet maybe
security/knockd will help you?
19.09.2011, 23:05, "James Strother":
Does anyone know a good way of limiting the number of ssh attempts
from a single IP address?
Hi James,
19.09.2011, 23:05, "James Strother" :
>>> Does anyone know a good way of limiting the number of ssh attempts
>>> from a single IP address?
>>>
>>> I found the following website, which describes a variety of approaches:
>>>
>>> http:/
on't
think port knocking is a good fit here.
Thanks,
Jim
2011/9/19 Григорьев Александр :
> If your target is protect freebsd box from bruting passwords from inet maybe
> security/knockd will help you?
>
> 19.09.2011, 23:05, "James Strother" :
>> Does anyone kn
If your target is protect freebsd box from bruting passwords from inet maybe
security/knockd will help you?
19.09.2011, 23:05, "James Strother" :
> Does anyone know a good way of limiting the number of ssh attempts
> from a single IP address?
>
> I found the following webs
Does anyone know a good way of limiting the number of ssh attempts
from a single IP address?
I found the following website, which describes a variety of approaches:
http://www.freebsdwiki.net/index.php/Block_repeated_illegal_or_failed_SSH_logins
But I am honestly not really happy with any of
s box, please pass the -v flag to
your ssh client to toggle verbose output and post that here too.
On 9/13/11 2:14 PM, George Vagner wrote:
> I was thinking that maybe because the wired interface doesn't actually have
> An IP address it is a reverse lookup thing.
>
>
>
Allow connections to forwarded ports in sshd config
-Original Message-
From: owner-freebsd-questi...@freebsd.org
[mailto:owner-freebsd-questi...@freebsd.org] On Behalf Of George Vagner
Sent: Tuesday, September 13, 2011 8:14 AM
To: freebsd-questions@freebsd.org
Subject: RE: ssh with
er 13, 2011 5:36 AM
To: freebsd-questions@freebsd.org
Subject: Re: ssh with bridged ap
On 9/13/11 3:54 AM, george vagner wrote:
> I have set up wireless AP with a static IP and bridged it to my internal
> wired network on RE0.
>
> I can successfully connect with WPA to the wireless network
he freebsd machine using ssh no problem as long as if I
> connect via the wireless network.
>
> If I try and log into the freebsd machine using the wired network I get a
> log in prompt for username
> Then I get the password prompt but after typing in my password it always
> says login
I have set up wireless AP with a static IP and bridged it to my internal
wired network on RE0.
I can successfully connect with WPA to the wireless network and browse other
computers on the wired net fine,
I can log into the freebsd machine using ssh no problem as long as if I
connect via the
tmask 0xff00
Then in natd.conf I have nats defined like so:
redirect_port tcp 192.168.101.123:22 12322
At first _all_ my NATed ssh connections were slow until I added -tso
to the main nic ifconfig. So this -tco switch is something that I've
had to add to all my nics for NAT to work prop
Frank Shute wrote:
> On Tue, Jul 12, 2011 at 03:18:07AM -0700, per...@pluto.rain.com wrote:
> >
> > DISPLAY is not getting set in a remote shell started by "ssh -X".
...
> Have you tried putting:
>
> DISPLAY=:0.0
>
> in ~/.ssh/environment on the machi
Mark Felder wrote:
> On Tue, 12 Jul 2011 00:06:33 -0500, Michael Sierchio
> wrote:
>
> > xauth not in your path?
>
> ssh -Y skips all auth stuff so you don't need xauth; he said that
> didn't work either :-(
Well, apparently, even -Y needs xauth (which was n
On Tue, Jul 12, 2011 at 03:18:07AM -0700, per...@pluto.rain.com wrote:
>
> DISPLAY is not getting set in a remote shell started by "ssh -X".
>
> $ echo $DISPLAY
> :0.0
> $ ssh -X [server] 'echo DISPLAY=%$DISPLAY%'
> DISPLAY=%%
>
> How wou
Eitan Adler wrote:
> > It still fails with the 6.1 system as the ssh client,
> > and works with the 6.1 system as the ssh server
>
> Is X11Forwarding yes set in the server config of the failing
> direction?
Both seem to be defaulted.
On 6.1:
$ egrep -C 2 X11Forwarding
>
> It still fails with the 6.1 system as the ssh client,
> and works with the 6.1 system as the ssh server
Is X11Forwarding yes set in the server config of the failing direction?
> ___
> freebsd-questions@freebsd.org mail
On Tue, 12 Jul 2011 00:06:33 -0500, Michael Sierchio
wrote:
xauth not in your path?
ssh -Y skips all auth stuff so you don't need xauth; he said that didn't
work either :-(
___
freebsd-questions@freebsd.org mailing
xauth not in your path?
On Tue, Jul 12, 2011 at 4:46 AM, wrote:
> Mark Felder wrote:
>
>> This sounds silly, but what happens if you try ssh -Y
>
> Exactly the same thing as with -X, in either direction.
>
> It still fails with the 6.1 system as the ssh client,
> an
Mark Felder wrote:
> This sounds silly, but what happens if you try ssh -Y
Exactly the same thing as with -X, in either direction.
It still fails with the 6.1 system as the ssh client,
and works with the 6.1 system as the ssh server
___
free
This sounds silly, but what happens if you try ssh -Y
Regards,
Mark
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-uns
DISPLAY is not getting set in a remote shell started by "ssh -X".
$ echo $DISPLAY
:0.0
$ ssh -X [server] 'echo DISPLAY=%$DISPLAY%'
DISPLAY=%%
How would I go about debugging this?
DISPLAY _is_ set correctly on the ssh client -- I am running in
an xterm there, and ca
when I run GNU
Screen on the remote box (which is OpenBSD). GNU Screen is not installed
on the FreeBSD box.
How can I get screen's colors to work in my FreeBSD ssh sessions? I can
connect to the remote box from other computers (using putty, xterm,
linux console, etc.) without issue. Maybe I
Figured it out. I just needed screen installed on the FreeBSD box. Thanks
for all your help!
On Sat, 9 Jul 2011, Joshua Isom wrote:
On 7/8/2011 11:07 PM, David Krauser wrote:
Hello everybody,
I've tried to setup a kind of 'dedicated ssh client' using FreeBSD, and
I'
I echoed $TERM on both boxes, and they are both cons25. I figured out,
though, that I'm only seeing the color spillover issue when I run GNU
Screen on the remote box (which is OpenBSD). GNU Screen is not installed
on the FreeBSD box.
How can I get screen's colors to work in my F
On 7/8/2011 11:07 PM, David Krauser wrote:
Hello everybody,
I've tried to setup a kind of 'dedicated ssh client' using FreeBSD, and
I'm having some issues with the terminal colors.
I have a basic install of FreeBSD 8.2-RELEASE (I only had kernel-dev
packages checked at
Hello everybody,
I've tried to setup a kind of 'dedicated ssh client' using FreeBSD, and
I'm having some issues with the terminal colors.
I have a basic install of FreeBSD 8.2-RELEASE (I only had kernel-dev
packages checked at installation) and I rebuilt the GENERIC k
1 - 100 of 2823 matches
Mail list logo