Bill Longman gmail.com> writes:
>
> Roc, in one of your posts, you listed your grub.conf line and, according
> to the gmane entry, anyway, it looks like it's split across two lines.
> Could it be that simple? Is your grub.conf entry for the kernel command
> on just one line? (Genkernel added the
On 06/25/2010 12:17 PM, rocwhite168 wrote:
> "Root-NFS: No NFS server available, giving up.
> VFS: Unable to mount root fs via NFS, trying floppy.
> VFS: Cannot open root device "sda5" or unknown-block(2,0)
> Please append ac correct "root=" boot option; here are the
> available partitions:
> Kerne
Dale gmail.com> writes:
>
> Do you have SATA drives or IDE? If you have IDE, try changing your
> fstab and grub line from sda5 to hda5. That error is caused by that
> pretty much every time. Keep in mind, it doesn't matter what the drive
> reports itself as when booted off the CD, it only
rocwhite168 wrote:
Bill Longman gmail.com> writes:
Yikes. Sorry, I didn't look back through the thread.
Did you notice that you have an extra zero in your CONFIG_PHYSICAL:
CONFIG_PHYSICAL_START=0x100
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100
The default is 0x1
Bill Longman gmail.com> writes:
>
> Yikes. Sorry, I didn't look back through the thread.
>
> Did you notice that you have an extra zero in your CONFIG_PHYSICAL:
>
> CONFIG_PHYSICAL_START=0x100
> # CONFIG_RELOCATABLE is not set
> CONFIG_PHYSICAL_ALIGN=0x100
>
> The default is 0x10
On 06/22/2010 05:35 PM, rocwhite168 wrote:
>>> Yes, it's built-in. I have attached a copy of my kernel config file in the
>>> original post.
>>
>> I'll bet you don't have HUGETLBFS turned on in your kernel. It's
>> required for ext4.
>>
>
> I checked and both HUGETLBFS and HUGETLB_PAGE are enable
rocwhite168 wrote:
Dale gmail.com> writes:
I did some googling. Seriously grasping at straws here. Do you have
SMP enabled? If so, do you really have a multiprocessor or multicore
machine? I ask beause I did find where someone else had SMP enabled and
it shouldn't have been. I notic
Dale gmail.com> writes:
>
> I did some googling. Seriously grasping at straws here. Do you have
> SMP enabled? If so, do you really have a multiprocessor or multicore
> machine? I ask beause I did find where someone else had SMP enabled and
> it shouldn't have been. I noticed it shows i
Bill Longman gmail.com> writes:
>
> > Yes, it's built-in. I have attached a copy of my kernel config file in the
> > original post.
>
> I'll bet you don't have HUGETLBFS turned on in your kernel. It's
> required for ext4.
>
I checked and both HUGETLBFS and HUGETLB_PAGE are enabled. Actually
walt gmail.com> writes:
>
> I recall reading threads about problems caused by putting the root partition
> on a raid volume, but I've never understood what the problems are. Is that
> your situation? Maybe someone else can remind us about it.
>
I guess not. I'm not using RAID.
Thanks,
Roc
On 06/21/2010 10:20 PM, rocwhite168 wrote:
> Dale gmail.com> writes:
>
>>
>> I notice you are using ext4 for the root partition file system. Do you
>> have support for ext4 compiled in the kernel? Not as a module but built
>> into the kernel? Using modules is OK but things that it has to h
On Tue, 22 Jun 2010 16:00:08 +0300, Arttu V. wrote:
> > fstab
> > --
> > /dev/sda1 /boot ext4
> > noauto,noatime 1 2 /dev/sda5 /
> > ext4noatime 0
> > 1 /dev/sda3 /usrext4
> > noatime
On 6/22/10, rocwhite168 wrote:
> fstab
> --
> /dev/sda1 /boot ext4noauto,noatime 1 2
> /dev/sda5 / ext4noatime 0 1
> /dev/sda3 /usrext4noatime
On 06/21/2010 09:46 PM, rocwhite168 wrote:
Walter Dnes waltdnes.org> writes:
On Mon, Jun 21, 2010 at 02:57:58PM +0800, rocwhite168 wrote
On the other hand, I'm trying to configure the kernel manually. I
did this according to several online tutorials, but it still won't
even start up: "Root
rocwhite168 wrote:
Dale gmail.com> writes:
I sort of think this is in there but make sure you did the same for your
drive controllers as well. You may also want to try this link.
http://forums.gentoo.org/viewtopic-p-4173972.html#4173972
I haven't had to put that on mine but maybe somet
Dale gmail.com> writes:
>
> I sort of think this is in there but make sure you did the same for your
> drive controllers as well. You may also want to try this link.
>
> http://forums.gentoo.org/viewtopic-p-4173972.html#4173972
>
> I haven't had to put that on mine but maybe something is dif
rocwhite168 wrote:
Dale gmail.com> writes:
I notice you are using ext4 for the root partition file system. Do you
have support for ext4 compiled in the kernel? Not as a module but built
into the kernel? Using modules is OK but things that it has to have to
get to the point where it can
Dale gmail.com> writes:
>
> I notice you are using ext4 for the root partition file system. Do you
> have support for ext4 compiled in the kernel? Not as a module but built
> into the kernel? Using modules is OK but things that it has to have to
> get to the point where it can read the r
rocwhite168 wrote:
Kaddeh gmail.com> writes:
it would help to also put your /etc/fstaband let us know what FS you have root
setup asin addition to your /boot/grub/grub.conf
2010/6/20 rocwhite168 163.com>
I used genkernel to configure the kernel. It complained every time at shu
Walter Dnes waltdnes.org> writes:
>
> On Mon, Jun 21, 2010 at 02:57:58PM +0800, rocwhite168 wrote
>
> > On the other hand, I'm trying to configure the kernel manually. I
> > did this according to several online tutorials, but it still won't
> > even start up: "Root filesystem could not be mount
Walter Dnes waltdnes.org> writes:
>
> On Mon, Jun 21, 2010 at 02:57:58PM +0800, rocwhite168 wrote
>
> > On the other hand, I'm trying to configure the kernel manually. I
> > did this according to several online tutorials, but it still won't
> > even start up: "Root filesystem could not be mount
Kaddeh gmail.com> writes:
>
> it would help to also put your /etc/fstaband let us know what FS you have
> root
setup asin addition to your /boot/grub/grub.conf
> 2010/6/20 rocwhite168 163.com>
> I used genkernel to configure the kernel. It complained every time at
> shutdown
that
>
> "Code:
22 matches
Mail list logo
