On Monday 08 February 2010 21:23:00 Mauro Carvalho Chehab wrote:
> Maupin, Chase wrote:
> > All,
> >
> > Texas Instruments (TI) is working on the design for the V4L2 capture and
> > display drivers for our next generation system-on-chip (SoC) processor and
> > would like to solicit your feedback
Hi All
Fix compilation tm6000 module.
diff -r 690055993011 linux/drivers/staging/tm6000/tm6000-cards.c
--- a/linux/drivers/staging/tm6000/tm6000-cards.c Sun Feb 07 22:26:10
2010 -0200
+++ b/linux/drivers/staging/tm6000/tm6000-cards.c Tue Feb 09 10:44:14
2010 +0900
@@ -45,6 +45,8 @@
On Mon, Feb 8, 2010 at 11:43 PM, Richard Lemieux wrote:
> Hi,
>
> I got some driver crashes after upgrading to kernel 2.6.32.7. It seems that
> activating either TBS8920 (DVB-S) and HVR950Q (ATSC) after the other one has
> run (and is no longer in use by an application) triggers a driver crash.
Hi,
I got some driver crashes after upgrading to kernel 2.6.32.7. It seems that
activating either TBS8920 (DVB-S) and HVR950Q (ATSC) after the other one has
run (and is no longer in use by an application) triggers a driver crash.
Each device individually works fine (as long as the other one doe
Am Montag, den 08.02.2010, 08:14 -0800 schrieb Linus Torvalds:
>
> On Mon, 8 Feb 2010, Chicken Shack wrote:
> >
> > This is a SCANDAL, not fun! This is SCANDALOUS!
>
> I agree that this whole thread has been totally inappropriate from
> beginning to end.
The initial problem was, how to find s
Hello.
I use a Creatix ctx929 card as dvb-s adapter.
Whenever I watch tv with it there are lots of glitches.
The card has a TDA10086 tuner and a saa7134 chip.
I am using kernel 2.6.32.5 at the moment.
The card is autodetected as card number 93.
(Medion 7134 Bridge #2) which is possibly right
From: Randy Dunlap
This patch reduces static stack usage of one of the 2 top offenders
as listed by 'make checkstack':
Building with CONFIG_FRAME_WARN=2048 produces:
drivers/media/dvb/frontends/dib3000mc.c:853: warning: the frame size of 2224
bytes is larger than 2048 bytes
and in 'make check
From: Randy Dunlap
This patch reduces static stack usage of one of the 2 top offenders
as listed by 'make checkstack':
Building with CONFIG_FRAME_WARN=2048 produces:
drivers/media/dvb/frontends/dib7000p.c:1367: warning: the frame size of 2320
bytes is larger than 2048 bytes
and in 'make check
Chicken Shack wrote:
ok anonymous chicken
you've managed a distinct first: i've installed a block filter on your
email address.
Rudy
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vg
Hi,
the linuxtv.org server is going to be moved to a new location
on Wednesday, around 2pm CET (UTC+1:00).
There'll be a bit of downtime.
Johannes
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info a
On Thu, Feb 04, 2010 at 04:07:36PM +0200, Pekka Sarnila wrote:
> Yes, my comment maybe criticizes more the basic architectural structure of
> usb putting it's own work up to higher layer. The only practical thing is
> that, if there is a non-HID device suffering from that FULLSPEED problem,
> th
On Monday 08 February 2010, Guennadi Liakhovetski wrote:
> To save power soc-camera powers subdevices down, when they are not in use,
> if this is supported by the platform. However, the V4L standard dictates,
> that video nodes shall preserve configuration between uses. This requires
> runtime
Maupin, Chase wrote:
> All,
>
> Texas Instruments (TI) is working on the design for the V4L2 capture and
> display drivers for our next generation system-on-chip (SoC) processor and
> would like to solicit your feedback. Our new SoCs have been improved to
> allow for higher video resolutions a
I have switched from hack to zl10353 module, and I have tested more
different setups. I have found what wrong is, in function
tl10353_read_status() and zl10353_read_snr(), not positive value.
zl10353_read_status()
reghas digitalhasn't
digital
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Mon Feb 8 19:00:05 CET 2010
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 14164:690055993011
gcc version: i686-
Hi Val
On Mon, 8 Feb 2010, Valentin Longchamp wrote:
> > /*
> > * Power Management:
> > * This function does nothing for now but must be present for pm to work
> > */
> > static int mt9t031_runtime_suspend(struct device *dev)
> > {
> > return 0;
> > }
>
> First, can you confirm me that th
Am Montag, den 08.02.2010, 11:09 -0800 schrieb Linus Torvalds:
>
> On Mon, 8 Feb 2010, Chicken Shack wrote:
> > ...
>
> Please stop emailing me. I'm simply not interested in your political
> troubles with the DVB people.
>
> I see with my own eyes why people have issues with your way of
> comm
Stefan Ringel wrote:
> Am 08.02.2010 19:14, schrieb Mauro Carvalho Chehab:
>> Stefan Ringel wrote:
>>
>> We'll need some function to change between analog and digital modes, doing
>> the right
>> GPIO changes. See em28xx_set_mode() for a way of implementing it.
>>
>>
> I don't mean that
On Mon, 8 Feb 2010, Chicken Shack wrote:
> ...
Please stop emailing me. I'm simply not interested in your political
troubles with the DVB people.
I see with my own eyes why people have issues with your way of
communication, and quite frankly, I'm not interested in discussing
name-calling wit
Am 08.02.2010 19:14, schrieb Mauro Carvalho Chehab:
> Stefan Ringel wrote:
>
>> Am 08.02.2010 12:21, schrieb Mauro Carvalho Chehab:
>>
>>> Hi Stefan,
>>>
>>> First, a few comments about your patch series:
>>>
>>> I've committed almost of your patches, and added an extra patch to make the
>>
Am 08.02.2010 16:55, schrieb Stefan Ringel:
> Am 08.02.2010 03:55, schrieb Mauro Carvalho Chehab:
>
>> stefan.rin...@arcor.de wrote:
>>
>>
>>
>>> + ctl.vhfbw7 = 1;
>>> + ctl.uhfbw8 = 1;
>>>
>>>
>> I don't think you need to set this, as the driver will auto
Hello Guennadi,
Guennadi Liakhovetski wrote:
First more details about what I do with the camera: I open the device, issue
the S_CROP / S_FMT calls and read images, the behaviour is fine, then close
the device.
Then if I reopen the device, reissue the S_CROP / S_FMT calls with the same
params, b
Linus Torvalds wrote:
>
> On Mon, 8 Feb 2010, Mauro Carvalho Chehab wrote:
>> are available in the git repository at:
>>
>> ssh://linuxtv.org/git/fixes.git v4l_for_linus
>
> I don't have ssh access to that thing, and git:// doesn't work.
Sorry for the bad link. We've recently moved our master
Am Montag, den 08.02.2010, 08:14 -0800 schrieb Linus Torvalds:
>
> On Mon, 8 Feb 2010, Chicken Shack wrote:
> >
> > This is a SCANDAL, not fun! This is SCANDALOUS!
>
> I agree that this whole thread has been totally inappropriate from
> beginning to end.
Yes, as a matter of frustration and th
On Mon, 8 Feb 2010, Mauro Carvalho Chehab wrote:
>
> are available in the git repository at:
>
> ssh://linuxtv.org/git/fixes.git v4l_for_linus
I don't have ssh access to that thing, and git:// doesn't work.
You probably meant
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/li
Op maandag 08-02-2010 om 14:43 uur [tijdzone +0100], schreef Chicken
Shack:
> Now if I were a cynical or ranter or another kind of dumb primitive
> persona non grata I would just add "Lol" or stuff like that and turn
> myself away.
>
> But this is no fun here.
>
> It's nothing but a big proof tha
Richard wrote:
> Hi all,
>
> Pardon my green-ness to the whole process of the v4l-dvb and would like
> some pointers on how to build the TM6000 components of the drivers
>
> in v4l/ directtory I edited the .config to enable the TM6000_DVB=m
> clause and rebuilt.. but lo and behold there were stil
Stefan Ringel wrote:
> Am 08.02.2010 12:21, schrieb Mauro Carvalho Chehab:
>> Hi Stefan,
>>
>> First, a few comments about your patch series:
>>
>> I've committed almost of your patches, and added an extra patch to make the
>> driver to compile it with -git. There were other broken things when comp
Guennadi Liakhovetski wrote:
> Hi Mauro
>
> Thanks for your comments.
>
> On Mon, 8 Feb 2010, Mauro Carvalho Chehab wrote:
>
>> Guennadi Liakhovetski wrote:
>>> To save power soc-camera powers subdevices down, when they are not in use,
>>> if this is supported by the platform. However, the V4L
Stefan Ringel wrote:
> Am 08.02.2010 03:55, schrieb Mauro Carvalho Chehab:
>> stefan.rin...@arcor.de wrote:
>>
>>
>>> + ctl.vhfbw7 = 1;
>>> + ctl.uhfbw8 = 1;
>>>
>> I don't think you need to set this, as the driver will automatically do the
>> firmware
>> tricks for the
Stefan Ringel wrote:
> Am 08.02.2010 12:27, schrieb Mauro Carvalho Chehab:
>> stefan.rin...@arcor.de wrote:
>>
>>> From: Stefan Ringel
>>>
>>> Signed-off-by: Stefan Ringel
>>> ---
>>> drivers/media/common/tuners/tuner-xc2028.c |7 ++-
>>> 1 files changed, 6 insertions(+), 1 deletions(
Stefan Ringel wrote:
> Am 08.02.2010 18:34, schrieb Stefan Ringel:
>> Am 08.02.2010 18:29, schrieb Mauro Carvalho Chehab:
>>
>>> Stefan Ringel wrote:
>>>
>>>
Am 08.02.2010 12:37, schrieb Mauro Carvalho Chehab:
> Mauro Carvalho Chehab wrote:
>
>
Ok. 3rd try (and i hope the last) to submit this stupid patch. This
patch applies correctly to current mercurial revision (tried 2 times.
patch -p 1 vp1027+ir.patch).
Now about changes. Patch add support of TwinHan 1027 DVB-S card.
Original author is Manu Abraham (abraham dot manu at gmail dot com)
Am 08.02.2010 18:34, schrieb Stefan Ringel:
> Am 08.02.2010 18:29, schrieb Mauro Carvalho Chehab:
>
>> Stefan Ringel wrote:
>>
>>
>>> Am 08.02.2010 12:37, schrieb Mauro Carvalho Chehab:
>>>
>>>
Mauro Carvalho Chehab wrote:
>> +
Am 08.02.2010 18:29, schrieb Mauro Carvalho Chehab:
> Stefan Ringel wrote:
>
>> Am 08.02.2010 12:37, schrieb Mauro Carvalho Chehab:
>>
>>> Mauro Carvalho Chehab wrote:
>>>
>>>
> + tm6000_read_write_usb (dev, 0xc0, 0x10, 0x7f1f, 0x, buf, 2);
>
>
Am 08.02.2010 12:21, schrieb Mauro Carvalho Chehab:
> Hi Stefan,
>
> First, a few comments about your patch series:
>
> I've committed almost of your patches, and added an extra patch to make the
> driver to compile it with -git. There were other broken things when compiling
> against -git.
>
> Sev
Stefan Ringel wrote:
> Am 08.02.2010 12:37, schrieb Mauro Carvalho Chehab:
>> Mauro Carvalho Chehab wrote:
>>
+ tm6000_read_write_usb (dev, 0xc0, 0x10, 0x7f1f, 0x, buf, 2);
>>
>>> Most of the calls there are read (0xc0). I don't know any device that
>>> requires
Linus Torvalds wrote:
> - if somebody reports a regression, IT MUST BE FIXED. Not "discussed" for
>two weeks. Not talked around. If we have a bisected commit that starts
>oopsing with an existing setup that used to work, there is no
>discussion. That commit absolutely _has_ to be r
Am 08.02.2010 12:27, schrieb Mauro Carvalho Chehab:
> stefan.rin...@arcor.de wrote:
>
>> From: Stefan Ringel
>>
>> Signed-off-by: Stefan Ringel
>> ---
>> drivers/media/common/tuners/tuner-xc2028.c |7 ++-
>> 1 files changed, 6 insertions(+), 1 deletions(-)
>>
>> diff --git a/drivers/m
Hi
On Monday 08 February 2010 17:49:29 Markus Rechberger wrote:
> To write a driver with good quality it takes alot more than just 50
> hours, it took us
> around 1 year to have a certain quality now.
> We now support Linux, FreeBSD and MacOSX with the same driver as well as
> embedded ARM devices
On Sat, Feb 6, 2010 at 12:14 PM, edm wrote:
>> (switched to email. Please respond via emailed reply-to-all, not via the
>> bugzilla web interface).
> Hi, using the last version of v4l-dvb driver from hg, solved this
> issue. I tested the card in the last days and it seems to work well
> now; t
On Mon, Feb 8, 2010 at 4:56 PM, Markus Moll
wrote:
> Hi
>
> I have just bought one of these terratec usb sticks (without looking at the
> list of supported devices first, my fault, I know) and I guess I'm unable to
> return it. Before I give it away for free or sell it at a much lower price, I
> w
The following changes since commit 6339204ecc2aa2067a99595522de0403f0854bb8:
Linus Torvalds (1):
Merge branch 'for-linus' of git://git.kernel.org/.../viro/vfs-2.6
are available in the git repository at:
ssh://linuxtv.org/git/fixes.git v4l_for_linus
Those patches addresses the regress
Hi
I have just bought one of these terratec usb sticks (without looking at the
list of supported devices first, my fault, I know) and I guess I'm unable to
return it. Before I give it away for free or sell it at a much lower price, I
wanted to ask a few things. Let me recapitulate the story as
On Mon, 8 Feb 2010, Chicken Shack wrote:
>
> This is a SCANDAL, not fun! This is SCANDALOUS!
I agree that this whole thread has been totally inappropriate from
beginning to end.
On all sides, btw. I would suggest that somebody who can't even use his
own name should be the last to complain a
Hello Mr. Shack,
On Mon, Feb 8, 2010 at 8:43 AM, Chicken Shack wrote:
> I vote for Andy Walls, Devin Heitmueller. There are a couple of capable
> candidates here who can really do that job with a better output for the
> whole Linux community.
> There is ABSOLUTELY NO necessity to continue with Ma
Am 08.02.2010 12:37, schrieb Mauro Carvalho Chehab:
> Mauro Carvalho Chehab wrote:
>
>>> + tm6000_read_write_usb (dev, 0xc0, 0x10, 0x7f1f, 0x, buf, 2);
>>>
>
>> Most of the calls there are read (0xc0). I don't know any device that
>> requires
>> a read for it to work. I
Am 08.02.2010 03:55, schrieb Mauro Carvalho Chehab:
> stefan.rin...@arcor.de wrote:
>
>
>> +ctl.vhfbw7 = 1;
>> +ctl.uhfbw8 = 1;
>>
> I don't think you need to set this, as the driver will automatically do the
> firmware
> tricks for the firmwares. This will probably
On Fri, 5 Feb 2010, Pekka Sarnila wrote:
> > Can't be HID bus with a specific driver used instead now?
>
> Well it could, but this way it is much less work and more generic. I use many
> different joysticks, yokes and pedals. And with some generic modifications and
> improvements into generic HID
Hi all,
Pardon my green-ness to the whole process of the v4l-dvb and would like
some pointers on how to build the TM6000 components of the drivers
in v4l/ directtory I edited the .config to enable the TM6000_DVB=m
clause and rebuilt.. but lo and behold there were still no modules
built.. I a
Hi Andy,
Thanks for taking the time to do some testing in your environment.
On Sun, Feb 7, 2010 at 7:10 PM, Andy Walls wrote:
> My observations:
>
> 1. With the amplifier on and anti-alias filter off things looked fine.
> 2. With the amplifier on and anti-alias filter on things looked fine.
> 3.
All,
Texas Instruments (TI) is working on the design for the V4L2 capture and
display drivers for our next generation system-on-chip (SoC) processor and
would like to solicit your feedback. Our new SoCs have been improved to allow
for higher video resolutions and greater frame rates. To this
Hi,
linuxtv uses mercurial (or git) not svn, please check the how-to:
http://www.linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers
regards,
Paulo
2010/2/8 loody :
> Dear all:
> I hear UVC is change its repository to linxutv.
> But I tried several possible reposit
Hi Mauro
Thanks for your comments.
On Mon, 8 Feb 2010, Mauro Carvalho Chehab wrote:
> Guennadi Liakhovetski wrote:
> > To save power soc-camera powers subdevices down, when they are not in use,
> > if this is supported by the platform. However, the V4L standard dictates,
> > that video nodes s
Dear all:
I hear UVC is change its repository to linxutv.
But I tried several possible repositories like
svn co http://linuxtv.org/hg/~pinchartl/uvcvideo/tags
svn co http://linuxtv.org/hg/~pinchartl/uvcvideo/rev/75c97b2d1a2a
But svn says the repository is incorrect.
Would anyone tell me where is t
Am Montag, den 08.02.2010, 13:24 +0100 schrieb Andreas Oberritter:
> Hello Mauro,
>
> Mauro Carvalho Chehab wrote:
> > Good catch, but it seems better to initialize both the mutex and the list
> > head
> > at dvb_dmx_dev_init. Please test if the following patch fixes the issue. If
> > so, please
Guennadi Liakhovetski wrote:
> To save power soc-camera powers subdevices down, when they are not in use,
> if this is supported by the platform. However, the V4L standard dictates,
> that video nodes shall preserve configuration between uses. This requires
> runtime power management, which is i
Franklin Meng wrote:
> This patch adds remote support for the Kworld 315U device
>
> Note: I believe I got most of the mappings correct. Though the
> source and shutdown button probably could be mapped to something
> better.
>
> To be done: Still need to get the Kworld analog patch resubmitted
On Mon, 2010-02-08 at 08:59 +0100, Hans Verkuil wrote:
> On Monday 08 February 2010 08:20:14 Dmitri Belimov wrote:
> > Hi All.
> >
> > I wrote SPI bitbang master over GPIO of saa7134. Speed of writing is much
> > slow then in a Windows systems.
> > I make some tests:
> >
> > Windows, SPI bitbang
Hello Mauro,
Mauro Carvalho Chehab wrote:
> Good catch, but it seems better to initialize both the mutex and the list head
> at dvb_dmx_dev_init. Please test if the following patch fixes the issue. If
> so, please
> sign.
please apply Francesco's original patch. Yours won't work, because
"feed"
Mauro Carvalho Chehab wrote:
>> +tm6000_read_write_usb (dev, 0xc0, 0x10, 0x7f1f, 0x, buf, 2);
> Most of the calls there are read (0xc0). I don't know any device that requires
> a read for it to work. I suspect that the above code is just probing to check
> what i2c devices are foun
stefan.rin...@arcor.de wrote:
> From: Stefan Ringel
>
> Signed-off-by: Stefan Ringel
> ---
> drivers/media/common/tuners/tuner-xc2028.c |7 ++-
> 1 files changed, 6 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/media/common/tuners/tuner-xc2028.c
> b/drivers/media/common/tuner
stefan.rin...@arcor.de wrote:
> From: Stefan Ringel
>
> Signed-off-by: Stefan Ringel
> ---
> drivers/staging/tm6000/tm6000-cards.c | 11 +++
> 1 files changed, 7 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/staging/tm6000/tm6000-cards.c
> b/drivers/staging/tm6000/tm6000-ca
Hi Stefan,
First, a few comments about your patch series:
I've committed almost of your patches, and added an extra patch to make the
driver to compile it with -git. There were other broken things when compiling
against -git.
Several of your patches are adding leading whitespaces. Please review
To save power soc-camera powers subdevices down, when they are not in use,
if this is supported by the platform. However, the V4L standard dictates,
that video nodes shall preserve configuration between uses. This requires
runtime power management, which is implemented by this patch. It allows
65 matches
Mail list logo