From: Yusuke Goda
commit 1d40ccc5723b9b3028829194c422a01cf8afd2a3 from
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas-bsp.git
This patch adds reserved memory regions:
- Lossy Decompression
48 MiB : 0x005400 -> 0x0056ff
- Default CMA area
400 MiB :
From: Andrey Gusakov
Add PCIe regulators for KingFisher board.
Signed-off-by: Meng Li
---
arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 47 +
drivers/pci/controller/pcie-rcar.c | 64
2 files changed, 111 insertions(+)
diff --git
From: Takeshi Kihara
commit 3c3b44c752c4eef9a29694f4262934445c5f5da9 from
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas-bsp.git
This patch enables CPUIdle (Core shutdown) support for R-Car H3.
Signed-off-by: Takeshi Kihara
Signed-off-by: Meng Li
---
From: Limeng
If disable a clock when it is already in disable status, there
will be a warning trace generated. So, it is need to confirm
whether what status the clock is in before disable it.
Signed-off-by: Meng Li
---
drivers/net/can/rcar/rcar_can.c | 5 -
1 file changed, 4
From: Limeng
Hi Bruce,
I am working on BSP renesas-rcar platform, and intend to merge this BSP
supporting into yocto community.
Below 5 patches are used to improve gpio, CAN BUS, audio and PCIe features
0001-arch-arm64-dts-Set-gpio5-pin9-as-input-by-default.patch
From: Limeng
The gpio5-pin9 is used as the interrupt pin of i2c external
gpio chip, so set this pin as input by default.
Signed-off-by: Meng Li
---
arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 9 +
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
On Thu, Oct 24, 2019 at 6:26 AM wrote:
>
> From: Quanyang Wang
>
> Hi all,
>
> V1 ---> V2:
>
> 1. delete the patch "arch: arm64: dts: add overlay dts file" because it is
> improper
> to add into kernel source.
>
> 2. modify the patch " i2c: cadence: do not clear bus_hold_flag in mrecv" by
>
On Thu, Oct 24, 2019 at 3:49 AM wrote:
>
> From: He Zhe
>
> Thess options have been remove from mainline kernel.
>
> CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION removed by
> 4c145dce2601 ("xfrm: make xfrm modes builtin")
>
> CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE removed by
> be6ec88f41ba
On Thu, Oct 24, 2019 at 2:00 AM wrote:
>
> From: Limeng
>
> Hi Bruce,
>
> I am working on BSP renesas-rcar platform, and intend to merge this BSP
> supporting into yocto community.
> Below 4 patches are used to improve gpio, CAN BUS, audio and PCIe features
> This first patch is from mainline
In message: [linux-yocto][PATCH 0/2] xilinx-zynq: fix kdump hang issue
on 22/10/2019 quanyang.w...@windriver.com wrote:
> From: Quanyang Wang
>
> Hi Bruce, Michal,
>
> There are 2 patches.
>
> The patch "ARM: zynq: use physical cpuid in zynq_slcr_cpu_stop/start"
> fix the kdump hang issue
In message: [linux-yocto][kernel v5.2/standard/xlnx-soc][PATCH 0/1] [V2]
xilinx-zynqmp: fix calltrace
on 23/10/2019 quanyang.w...@windriver.com wrote:
> From: Quanyang Wang
>
> Hi Bruce,
>
> This patch is a V2 patch but no change against V1. Just add some comments
> in the temporary section
Hi Michal,
On 10/23/19 6:55 PM, Michal Simek wrote:
On 21. 10. 19 14:13, qwang2 wrote:
Hi Michal,
On 2019/10/21 下午6:45, Michal Simek wrote:
On 21. 10. 19 10:45, Quanyang Wang wrote:
Hi Michal,
On 10/21/19 4:16 PM, Michal Simek wrote:
On 21. 10. 19 7:50, quanyang.w...@windriver.com wrote:
From: Quanyang Wang
When using i2c_smbus_read_byte_data to read one byte from a
slave device, because of the commit d358def70688
("i2c: cadence: Fix the hold bit setting"), the transaction becomes:
S Addr Wr [A] Comm [A] P S Addr Rd [A] [Data] NA P
^
From: Quanyang Wang
Hi all,
V1 ---> V2:
1. delete the patch "arch: arm64: dts: add overlay dts file" because it is
improper
to add into kernel source.
2. modify the patch " i2c: cadence: do not clear bus_hold_flag in mrecv" by
adding
a I2C_M_NOSTART flag check according to Shubhrajyoti's
From: He Zhe
Thess options have been remove from mainline kernel.
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION removed by
4c145dce2601 ("xfrm: make xfrm modes builtin")
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE removed by
be6ec88f41ba ("selinux: Remove SECURITY_SELINUX_BOOTPARAM_VALUE")
From: Andrey Gusakov
Add PCIe regulators for KingFisher board.
Signed-off-by: Meng Li
---
arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 47 +
drivers/pci/controller/pcie-rcar.c | 64
2 files changed, 111 insertions(+)
diff --git
From: Yusuke Goda
commit 1d40ccc5723b9b3028829194c422a01cf8afd2a3 from
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas-bsp.git
This patch adds reserved memory regions:
- Lossy Decompression
48 MiB : 0x005400 -> 0x0056ff
- Default CMA area
400 MiB :
From: Takeshi Kihara
commit 3c3b44c752c4eef9a29694f4262934445c5f5da9 from
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas-bsp.git
This patch enables CPUIdle (Core shutdown) support for R-Car H3.
Signed-off-by: Takeshi Kihara
Signed-off-by: Meng Li
---
From: Limeng
The gpio5-pin9 is used as the interrupt pin of i2c external
gpio chip, so set this pin as input by default.
Signed-off-by: Meng Li
---
arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 9 +
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
From: Limeng
Hi Bruce,
I am working on BSP renesas-rcar platform, and intend to merge this BSP
supporting into yocto community.
Below 4 patches are used to improve gpio, CAN BUS, audio and PCIe features
This first patch is from mainline upstream, the other 3 patches merged into
From: Limeng
If disable a clock when it is already in disable status, there
will be a warning trace generated. So, it is need to confirm
whether what status the clock is in before disable it.
Signed-off-by: Meng Li
---
drivers/net/can/rcar/rcar_can.c | 5 -
1 file changed, 4
21 matches
Mail list logo