Manuel,
> > I have found that any changes I make to php.ini are ignored, even after
> > restarting Apache. I have been editing httpd.conf via Webmin,
> which for most
> > configs works fine (and is displayed in phpinfo(), the sendmail
> changes are
> > never displayed (always shows sendmail_path =
Somehow this part of the string is a problem, it has underscores, but
there is probably other things in this.
_%E5%D4%13%82%C9%DFN%5EFs%5E47%B2v%2F%D7%A4%0C%C6%9EnJ
On 23/02/2006, at 6:01 PM, Dan Rossi wrote:
Hi ive been trying to find answers with no luck. I am sending a
urlencoded encrypted
Hello,
on 02/23/2006 03:55 AM George Pitcher said the following:
> Jochem,
>
> Thanks, but I tried that and it made no difference.
>
> I have found that any changes I make to php.ini are ignored, even after
> restarting Apache. I have been editing httpd.conf via Webmin, which for most
> configs
Hi ive been trying to find answers with no luck. I am sending a
urlencoded encrypted string made with mcrypt. what is happening is
there is somehow special characters that mod_rewrite doesnt like so it
wont find a regex match properly with this rule
RewriteRule ^feeds/(.*)$ refer.php?$1 [L,QSA
Jochem,
Thanks, but I tried that and it made no difference.
I have found that any changes I make to php.ini are ignored, even after
restarting Apache. I have been editing httpd.conf via Webmin, which for most
configs works fine (and is displayed in phpinfo(), the sendmail changes are
never displa
Your example fails for me, Firefox and Mozilla. The rpc.php file
doesn't seem to return anything.
To answer your question though, a bot is capable of getting anything
that a human can, probably more. It's all a question of effort. As the
email scrapers get plenty of hits looking for standar
Thanks for all of the help!
Thanks for all of the help and resources!
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
Hello,
on 02/21/2006 03:19 PM cKc Consultants said the following:
> An email form that uses a simple server side php code to send the variable
> values managed to send:
>
>
> Content-Type: multipart/alternative;
>> boundary=5c7c7e682d991e8ec1f6825582ea2103
>> MIME-Version: 1.0
>> Subject: round a
Hello,
on 02/19/2006 09:12 PM tedd said the following:
> Manuel:
>
>> A good CAPTCHA must be fuzzy. If you know other fuzzy CAPTCHA besides
>> these, it may help to sharing that knowledge.
>
> Try this:
>
> http://xn--ovg.com/no_bot
>
> The point of CAPTCHA is to provide something that a bot c
Hello,
on 02/17/2006 05:10 PM tedd said the following:
> Manuel:
>
> Your points are well taken.
>
>> A good CAPTCHA must be fuzzy. If you know other fuzzy CAPTCHA besides
>> these, it may help to sharing that knowledge.
>
> The CAPTCHA I was primarily referring to was the image one -- however,
Hello,
on 02/21/2006 03:40 PM Dirk Vanden Boer said the following:
> I have a C++ application that posts binary data to a php script that I
> created using libcurl. Everything works fine except when my binary data
> happens to start with the '&' symbol. In that case I can't read the http
> post
Chuck, you are the man! I decided to reread the manual word for word but
have only gotten through Strings as of last night. Thanks for zeroing me in
on the right spot.
txs
2dogs
"Chuck Anderson" <[EMAIL PROTECTED]> wrote in message
news:[EMAIL PROTECTED]
> 2dogs wrote:
>
>>I recently encou
scribe, visit: http://www.php.net/unsub.php
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
__ NOD32 1.1416 (20060222) Information __
This message was checked by NOD32 antivirus system. http://www.eset.com
--
PHP General Mailing
It also seems that any forward slash being encoded if it encodes,
mod_rewrite doesnt like, therefore I have to split up the urls using
parse_url, but it seems it still doesnt like the query part and some
special characters like ampersands and equals ?
On 23/02/2006, at 12:30 PM, Dan Rossi w
Ok it looks like when i exploded the urls by a comma, one has space
padding, i had to trim it first, the array was coming out like
host=>__http path=>//www.thedomain.com :\
On 23/02/2006, at 1:05 PM, Chris wrote:
Dan Rossi wrote:
Ive just discovered a strange issue where parse_url is not spli
Senior PHP Developer, Boca Raton, FL | 80-125k
Senior PHP Developer/Lead Programmer that has a solid object-oriented analysis
and design background. The new team member will be involved in the planning and
development of a variety of in-house, enterprise level e-commerce and marketing
applicati
Dan Rossi wrote:
Ive just discovered a strange issue where parse_url is not splitting up
the url properly. in the host key its returning like //www.php.net where
the url is http://www.php.net. any ideas ?
If the behaviour changed between versions without it being documented or
noted somewh
Ive just discovered a strange issue where parse_url is not splitting up
the url properly. in the host key its returning like //www.php.net
where the url is http://www.php.net. any ideas ?
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
hi there im having issue decoding an encoded string created with a pear
package Crypt_CBC which i am encoding a uri into the string and sending
to a rewrite url. The query string is not returning the encoded part of
the url properly for some reason and not decoding properly.
I have already
#x27;re using the eregi_replace function - which does case insensitive
replaces (read the man page).
Change it to use
ereg_replace
--
Postgresql & php tutorials
http://www.designmagick.com/
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
Nicolas Verhaeghe wrote:
That's not where the issue is.
Eregi_replace conducts a case insensitive SEARCH but how the REPLACE
operates has nothing to do with it.
If you use ereg_replace, then it is most obviously not going to replace
"MacOS" with "macos" or even "MacOS", because the string searc
That's not where the issue is.
Eregi_replace conducts a case insensitive SEARCH but how the REPLACE
operates has nothing to do with it.
If you use ereg_replace, then it is most obviously not going to replace
"MacOS" with "macos" or even "MacOS", because the string searched for is of a
different c
Here is the function:
function highlight_text($text, $highlight) {
return eregi_replace($highlight, "" . $highlight .
"", $text);
}
In this case, if the text to highglight is:
MacOS X Super Gizmo
And a client searches for the string "macos", the result will be:
macos X Super Gizmo
You'
Roy Souther wrote:
How can I make PHP use the symlink and stop trying to resolve the
original files?
Can you try:
$mydir = dirname(__FILE__);
include($mydir . '/../config.php');
?
or
$mydir = dirname(__FILE__);
include(dirname($mydir) . '/config.php');
--
Postgresql & php tutorials
http:/
Hi all!
I have a text highlight function which does not behave exactly as
needed. Behavior is logical but result is cumbersome.
Instead of replacing the portion of the text with the same portion of
text with some highlighting code added before and after, it replaces the
said text with the chunk o
I am trying to stop PHP from resolving symlinks. I have a PHP CMS that I use to host dozens of sites using Apache virtual hosting features. I need all the sites to run the exact same PHP CMS code but use their unique directories to host the different config files. The problem is that the PHP sc
IG wrote:
Is it possible to alter a subject line (or
body for that matter) of an email in a pop3 mailbox?
If it's already in the mailbox, then I highly doubt you can do this.
You need to do this on the way in before it gets to the account.
Consider the ramifications if you could:
Anyone coul
Hi tedd...
is this enough... : http://www.xn--ovg.com/aja/rpc.php?action=start
in my opinion, an is a
handy way...
cheers
bb
>Hi gang:
>
>A few days ago I posted my first attempt ajax. I posed the question
>"Could a bot find my email address contained within the code?"
>
>There was some discus
Hi gang:
A few days ago I posted my first attempt ajax. I posed the question
"Could a bot find my email address contained within the code?"
There was some discussion, but I wasn't sure as to what the decision
was, so I made another example, which can be found at:
http://www.xn--ovg.com/aja
On Wednesday 22 February 2006 15:09, John Nichel wrote:
> Jay Paulson wrote:
> > Just came across some code I haven't seen before and can't find anything
> > on php.net or google about it (maybe I'm not searching for the right
> > thing?). What is the following doing?
> >
> > // $dataobject is hold
Jay Paulson wrote:
Just came across some code I haven't seen before and can't find anything on
php.net or google about it (maybe I'm not searching for the right thing?).
What is the following doing?
// $dataobject is holding a bunch of variables like:
// $dataobject->var1
// $dataobjec
Just came across some code I haven't seen before and can't find anything on
php.net or google about it (maybe I'm not searching for the right thing?).
What is the following doing?
// $dataobject is holding a bunch of variables like:
// $dataobject->var1
// $dataobject->var2
// etc..
I believe it is because without the quotes, it is expecting a predefined
constant. With the quotes, it is expecting an array key. This is why if you
use a word that is not defined as a constant, php will first look for it as
a constant, won't find it, then looks through the array treating it like
Hello list,
it has been a while since I've posted the last time, but now I need your
help/ opinion again. I'm re-designing an existing page for an online
shop which is supposed to be used in different languages. The former
design was just a plan echo for an output since the page was only
intended
Peter Brawley on the mySQL list pointed me at:
http://www.artfulsoftware.com/mysqlbook/sampler/mysqled1ch20.html
Which uses mySQL 5's procedures and such.
I haven't implemented this yet, but it appears to be what I wanted for the
most part.
> -Original Message-
> From: Curt Zirzow [mail
Hello list,
it has been a while since I've posted the last time, but now I need your
help/ opinion again. I'm re-designing an existing page for an online
shop which is supposed to be used in different languages. The former
design was just a plan echo for an output since the page was only
intended
2dogs wrote:
I recently encountered a situation where I had to retrieve data from a MYSQL
database table with a field named "include". My code looked like this:
$content_result = mysql_query('SELECT * FROM calander') or
die(mysql_error());
$content_row = mysql_fetch_array($content_result);
i
I have three links. The code already auto selects one.
I'm trying to take that one link and automaticly start the download.
I tryed with header('location:$link');
but it tells me "Warning: Cannot modify header information"
what would I use to start downloading?
one of the link is another page so I
Benjamin Adams wrote:
I have it working with javascript but the if statements are not working:
---
echo $num_download;
if($num_downlaod <= 50){
--
See a problem?
--
John C. Nichel IV
Programmer/System Admin (ÜberGeek)
Dot Com Holdings of Buffalo
716.856.9675
[EMAI
Hi all.
Tried to find this and can't find any info.
I am writing a spam filter to run over multiple pop3 mail boxes which
will work on keywords and Bayesian. With a very high score the filter
will simply delete the email, with a med-high it will back the email in
a 'bulk-mail' folder and dele
Hey guys. I would like to first say thanks for all the help you have all
given me in the past (especially in my early programming days). Once again,
I would like to show my appreciation by offering an opportunity to use a new
PHP program I have created. The program is called TotalXplorer. Ba
George Pitcher wrote:
Hi,
I am in the process of moving from Windows (NT/XP) to Linux. I'm starting
with a new small application which I have working on my Windows XP laptop.
On my Linux box, I have php.ini saying:
search this page for 'exim' - it should help:
http://php.net/mail
sendmail
I have it working with javascript but the if statements are not working:
window.open('=$conf[$links]['link1']?>');
}else if(($num_download > 50) && ($num_download <= 75) && ($conf
[$links]['link2'] != '')){
?>
window.open('=$conf[$links]['link2']?>');
}else i
Hello.
Wormux is an opensource clone of Worms (Team17) :
http://www.wormux.org.
My name is CARRÉ Anthony (yeKcim) and i'm a Wormux
contributor, i draw some characters (skins) for this
game : http://www.wormux.org/wiki/en/skins.php.
My idea is to use opensource software mascots to draw
funny
Benjamin Adams wrote:
I have three links. The code already auto selects one.
I'm trying to take that one link and automaticly start the download.
I tryed with header('location:$link');
but it tells me "Warning: Cannot modify header information"
what would I use to start downloading?
one of the li
Ray Cantwell wrote:
Hello again,
I was wondering if any of you knew of a good command line utility for
php5 on linux? The box i write on has no X-windows.
Ray.
A command line utility to do what?
--
John C. Nichel IV
Programmer/System Admin (ÜberGeek)
Dot Com Holdings of Buffalo
716.856.9675
I have three links. The code already auto selects one.
I'm trying to take that one link and automaticly start the download.
I tryed with header('location:$link');
but it tells me "Warning: Cannot modify header information"
what would I use to start downloading?
one of the link is another page so I
tedd wrote:
> Hi:
>
> Curt. said:
>
>> PHP 4.4.2 - Released Jan 13 2006
>> php 5.1.2 - Released Jan 12 2006
>> PHP 5.0.5 - Released Sept 6 2005
>>
>> I wouldn't expect any more releases of 5.0.x version.
>
>
> Pardon my ignorance -- I have enough problems pounding out code to spend
> time follo
Hi all
I didn't get that many replies (thanks to those who did reply :) ) for this,
so now I've figured out the problem I thought I'd share the solution just in
case anyone else has the same issue:
The problem stemmed from the way the return from UPDATE is handled and the
scripts reliance on the
Hi:
Curt. said:
PHP 4.4.2 - Released Jan 13 2006
php 5.1.2 - Released Jan 12 2006
PHP 5.0.5 - Released Sept 6 2005
I wouldn't expect any more releases of 5.0.x version.
Pardon my ignorance -- I have enough problems pounding out code to
spend time following what's happening at the higher lev
Hi,
As your using MySQL5, I'd recommend putting all the Nested Set code in
stored procedures, that way the client doesn't need
to know about anything about the method, and the left, right columns never need
to be retrieved.
Jared
> I've been searching the web for the past few hours
I'm waiting for the result.
It would be nice of you when you post it in this list.
Thanx.
From: "Simon O'Beirne"
On Monday, February 20, 2006 11:58 PM
Wrote:
Hi guys,
A bit of an odd request. I'm in my third and final year at university,
and
part of an assignment requires obtaining develo
function fyll_sub_konto($pv){
foreach($this->subposter AS $konto=>$kt){
$kontoen=& $this->subposter[$konto];
$kontoen->fyll_fra_post($pv);
$kontoen->endre();
}
}
the line
$kontoen=& $this->subp
53 matches
Mail list logo