Hi Daniel,
options defined in PM tab are used to pass custom settings
of specific fence agent. In you case please take a look
at man page for fence_ilo2. I looked there briefly and
I'm afraid that your parameter is not supported.
I see that fence_ilo3_ssh and fence_ilo4_ssh should support
passing
Hi Johan,
Which oVirt version are you using?
Was the VM is in UP state?
Under the Host general tab, which running the VM, what do you see for "Live
Snapshot Support" (should be "Live Snapshot Support: Active")?
Regards,
Maor
- Original Message -
> From: "Johan Kooijman"
> To: "users"
- Original Message -
> From: "Christopher Young"
> To: users@ovirt.org
> Sent: Monday, May 11, 2015 8:12:22 PM
> Subject: [ovirt-users] MAC spoofing for specific VMs
>
> I'm working on some load-balancing solutions and they appear to require MAC
> spoofing. I did some searching and read
- Original Message -
> From: "Tigran Baluyan"
> To: users@ovirt.org
> Sent: Tuesday, May 5, 2015 10:54:10 AM
> Subject: [ovirt-users] Problems with installing second host with hosted
> engine
>
> Hi,
>
> I've stumbled across a very strange bug and been trying to work around it for
Hi Daniel,
Well, I have glusterfs up and running:
# service glusterd status
Redirecting to /bin/systemctl status glusterd.service
glusterd.service - GlusterFS, a clustered file-system server
Loaded: loaded (/usr/lib/systemd/system/glusterd.service; enabled)
Active: active (running) since Mo
This is the engine log:
2015-05-12 10:27:44,012 INFO [org.ovirt.engine.core.bll.ActivateVdsCommand]
(ajp--127.0.0.1-8702-2) [76c5a7e7] Lock Acquired to object EngineLock
[exclusiveLocks= key: b505a91a-38b2-48c9-a161-06f1360a3d6f value: VDS
, sharedLocks= ]
2015-05-12 10:27:44,186 INFO [org.ov
On Mon, May 11, 2015 at 02:12:22PM -0400, Christopher Young wrote:
> I'm working on some load-balancing solutions and they appear to require MAC
> spoofing. I did some searching and reading and as I understand it, you can
> disable the MAC spoofing protection through a few methods.
>
> I was wond
Hi Luciano,
I suggest you to check log files which usually provide a goof indication of
what is going on usually
You want to check the engine logs (ssh into your hosted engine, then
/var/log/ovirt-engine) and vdsm logs on your hosts (/var/log/vdsm/vdsm.log)
You want also to check if you mul
vdsm-gluster installed on your node?
From logs - it seems to indicate that it is not.
On 05/12/2015 03:02 PM, supo...@logicworks.pt wrote:
This is the engine log:
2015-05-12 10:27:44,012 INFO
[org.ovirt.engine.core.bll.ActivateVdsCommand] (ajp--127.0.0.1-8702-2)
[76c5a7e7] Lock Acquired to o
Hi,
we were supposed to release oVirt 3.6.0 Alpha release today but after
repository composition it didn't pass basic sanity test, hitting
Bug 1220772 - [Admin Portal] Can't create a VM using New Virtual Machine dialog
Postponing oVirt 3.6.0 Alpha by one week[1].
Maintainers: please ensure that
It would be nice, if ovirt snapshots were more safe. When a VM has the
ovirt-agent installed, ovirt could tell the agent to run site-speficic
actions. What I have in mind is:
linux vms:
- sync
- echo 3 > /proc/sys/vm/drop_caches
- zerofill empty space (this takes long but saves precious backup
I always do this, maybe a oVirt bug ?
2015-05-12 0:28 GMT-05:00 Yedidyah Bar David :
> - Original Message -
> > From: "Julián Tete"
> > To: "Yedidyah Bar David"
> > Cc: users@ovirt.org
> > Sent: Monday, May 11, 2015 7:46:40 PM
> > Subject: Re: [SOLVED] [ovirt-users] Problem with a secon
Hello,
why we have in reports host cores but not logical cpu cores? For example
in "Cluster Capacity Vs. Usage" report I always have more vCores then
Host Cores.
Thank you.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/use
- Original Message -
> From: "Julián Tete"
> To: "Yedidyah Bar David"
> Cc: users@ovirt.org
> Sent: Tuesday, May 12, 2015 3:22:02 PM
> Subject: Re: [SOLVED] [ovirt-users] Problem with a second host: Exit message:
> internal error: Cannot find suitable
> CPU model for given data.
>
> I a
Hi,
I was looking into a way to import our KVM VM's/images into oVirt 3.5. Some of
the VM's are Centos and others are Windows 2012. Some suggest to use virt-v2v
but the version that can be used in CentOS 7(.1) does not support the "-ic"
flag. See https://bugzilla.redhat.com/show_bug.cgi?id=1138
Hi ml,
oVirt should not prevent you from creating 11 thin provisioned disks.
Thin provisioning lets you create disks with minimum initial size and while the
VM writes data to them, they will get extended every time needed.
file system usually manages the initial size of the file and the extension
- Original Message -
> From: "Yedidyah Bar David"
> To: "Tigran Baluyan"
> Cc: users@ovirt.org
> Sent: Tuesday, 12 May, 2015 11:49:12 AM
> Subject: [ovirt-users] underscode at end of mount point (was: Problems with
> installing second host with hosted
> engine)
>
> - Origin
Thanks Sahina, you were right. vdsm-gluster was not installed. Weird, I don't
remember to remove it, but now I have the 2 nodes green.
Thanks a lot
- Mensagem original -
De: "Sahina Bose"
Para: supo...@logicworks.pt, "Daniel Helgenberger"
Cc: users@ovirt.org
Enviadas: Terça-feira
Hi all
We are using oVirt engine 3.5.1-0.0 on Centos 6.6
We have two DC. One with hosts using vdsm-4.16.10-8.gitc937927.el7.x86_64, the
other vdsm-4.16.12-7.gita30da75.el6.x86_64 on Centos6.6
No hosted-engine, it run on a dedicates VM, outside oVirt.
Behavior: When try to put the NFS export curr
Hello,
a week ago I set up a HE (3.5.2) with no problems; now this fails. I
suspect storage trouble but cannot pinpoint it. Did someth. change there
with the recent async release?
The storage domain is NFS3 via a 1G link to a ZFS storage appliance. The
export is working quite fast; tested with io
Yep. I had found that and applied it. Great solution! I actually wrote
about it to the zen load balancer list. I will add it here for
semi-documentation:
--
just wanted to follow-up so that it is documented on how to get this
working on oVirt/RHEV. I had to install a VDSM hook to allow
We are running oVirt Engine Version: 3.5.0.1-1.el6, this is running on
Super micros. We have 5 hosts in a cluster on VMs built on this. Hosts
Network interfaces are bonded and mode 4 (LACP). On the bonds we have VLANS
for different networks, and all linux vms built on these hosts work and can
acces
Hi,
On Tue, 12 May 2015, gefter chongong - NOAA Affiliate wrote:
We are running oVirt Engine Version: 3.5.0.1-1.el6, this is running on Super
micros. We have 5 hosts in a cluster on VMs built on this. Hosts Network
interfaces are bonded and mode 4
(LACP). On the bonds we have VLANS for differe
- Original Message -
> From: "Daniel Helgenberger"
> To: users@ovirt.org
> Sent: Tuesday, May 12, 2015 7:48:42 PM
> Subject: [ovirt-users] HE setup failing: Cannot set temporary password for
> console connection
>
> Hello,
>
> a week ago I set up a HE (3.5.2) with no problems; now thi
The problem has been solved. The reason that vdsm cannot see the vgs is the
permission of sudoers had been changed by somebody who hacked into our system.
After restoring the permission of sudoers everyting is fine.
like...@cs2c.com.cn
From: like...@cs2c.com.cn
Date: 2015-05-07 20:01
To: Nir
Hello.I'm just following up on an mailing list exchange from earlier in the
month that was asking about the possibility of an updated libvirt for
EL7.Sandro mentioned that this was being talked about but that the vdsm team
had worked around the issue and could do what they needed with the existi
- Original Message -
> From: "John Joseph"
> To: "Yedidyah Bar David"
> Cc: users@ovirt.org, "Petr Horacek"
> Sent: Monday, May 11, 2015 12:25:36 PM
> Subject: Re: [ovirt-users] My feedback on network setting after installing
> OVirt
>
>
>
>
>
>
> On Monday, 11 May 2015 2:14 PM, Y
Hey guys, my name is Javier and I'm currently working for Red Hat Argentina
as technical support for the LATAM GEO. I've been working @ RH for 2 years
now and in the virtualization team. I'm looking forward to learn more on
the upstream project and contribute as I can.
Cheers!!
___
Hi,
We have no blockers for 3.5.3[1] and no blocking dependencies.
We still have 18 bugs in MODIFIED and 2 on QA[2]:
MODIFIEDON_QA Total
external1 0 1
gluster 1 0 1
infra 5 1 6
integra
Hi, here's an update on 3.6 status on integration / rel-eng side
The tracker bug for 3.6.0 [1] currently shows 2 blockers:
Bug ID Whiteboard Status Summary
1119225 integration POST[engine-setup] 'Execution of setup
failed' message is odd if only nfs start failed
1220
Hi all,
There is any reason to choose to install a CentOS 6/7 and add it to oVirt
Manager instead of an oVirt Node ? It's just for managability or there is
other technical reasons ?
Thanks
--
Kevin
___
Users mailing list
Users@ovirt.org
http:
31 matches
Mail list logo