Hello Wahhab,
I do not know about using the MIMO cable between a USRP2 and a N2x0, the
USRP2 became end of life before I started at Ettus. I think it would work,
but cannot test it myself. Others at Ettus may know the answer.
You will need at least two 1 Gigabit connections to your host computer.
Thank you Derek for the comments.
I just want to clarify this point about connecting two USRP devices; first,
it seems to be fine to connect a USRPN200 with USRP2 (via a MIMO cable),
right?
Second, by connecting two devices via MIMO cable, I need to connect their
GigaBit Ethenet cables to a GigaBit
Hello Wahhab Albazrqaoe,
It is certainly possible to configure each USRP to be tuned to a different
frequency and to be synchronized closely in time. A 1 Gigabit Ethernet
connection can carry approximately 25 MS/s of 16 bit samples and 50 MS/s of
8 bit samples. We do not support sending 4 bit samp
Dear All,
We would like to sense (i.e. sample) 100 MHz of 2.4GHz spectrum. My idea is
to connect 2 USRPs (USRPN200 and USRP2) via a MIMO cable (available at
ettus.com). Then, we configure each USRP separately to monitor 50MHz of
bandwidth (8bit per sample).
My question:
1- is it possible to config