Re: [AFMUG] AirFiber24 repair

[SmarterBroadband]

I have emailed support to see what they can do.

 

Thanks

 

Adam

 

From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Nate Burke
Sent: Wednesday, June 26, 2019 2:51 PM
To: AnimalFarm Microwave Users Group 
Subject: Re: [AFMUG] AirFiber24 repair

 

Like I said, it was 2 years ago, but I had to go through support to verify
the broken radios before it let me purchase it from the store.  They gave me
a special code to use at the store.  

Nate

On 6/26/2019 4:48 PM, SmarterBroadband wrote:

Followed the link and it says "Sold Out"...

 

From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Tim Withrow via AF
Sent: Monday, June 24, 2019 6:21 PM
To: af@af.afmug.com  
Cc: Tim Withrow   
Subject: Re: [AFMUG] AirFiber24 repair

 

Thanks for the tip

  _  

On Monday, June 24, 2019 Nate Burke mailto:af@af.afmug.com> > wrote:

There's an official repair channel through UBNT I Believe.   In 2017 I sent
in 2 broken AF24 radios, and they let me buy refurbed radios for $400 each.
Everything was coordinated through Support and then ordered via the UBNT
Store.  Unless thing have changed since then.

https://store.ui.com/search?mockup=airfiber+repair

=airfiber+repair*






On 6/24/2019 6:10 PM, SmarterBroadband wrote:

I have a couple of AirFiber24s that need repair.   

 

Anyone doing this?

 

Thanks

 

Adam






-- 
AF mailing list
AF@af.afmug.com  
http://af.afmug.com/mailman/listinfo/af_af.afmug.com





 

-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] Looking for Fiber Job Postings

[Mike Hammett]

Maybe just pull, blow, push? ;-) 




I got some ballpark pricing for someone to do that work, but I figured with the 
amount we're doing, we'd see what it would cost to bring it in-house. 




- 
Mike Hammett 
Intelligent Computing Solutions 

Midwest Internet Exchange 

The Brothers WISP 




- Original Message -

From: ch...@wbmfg.com 
To: "AnimalFarm Microwave Users Group"  
Sent: Wednesday, June 26, 2019 5:12:15 PM 
Subject: Re: [AFMUG] Looking for Fiber Job Postings 




Push, pull, blow, splice is gonna cost you. 




From: Mike Hammett 
Sent: Wednesday, June 26, 2019 3:41 PM 
To: AnimalFarm Microwave Users Group 
Subject: [AFMUG] Looking for Fiber Job Postings 


I'm looking for places you see fiber-related job postings. I'm looking to see 
what everyone else is putting in their requests so I know how to best phrase 
mine. 

So far I've looked here: http://www.joink.com/careers and here: 
https://www.jdhcontracting.com/careers-at-jdh/ 


My ideal person is someone that can push\pull\blow fiber in existing conduit 
and can handle splicing it. 

I'll no doubt come up with other positions, but that's the itch that needs 
scratching. 




- 
Mike Hammett 
Intelligent Computing Solutions 

Midwest Internet Exchange 

The Brothers WISP 






-- 
AF mailing list 
AF@af.afmug.com 
http://af.afmug.com/mailman/listinfo/af_af.afmug.com 

-- 
AF mailing list 
AF@af.afmug.com 
http://af.afmug.com/mailman/listinfo/af_af.afmug.com 

-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] Looking for Fiber Job Postings

[Mike Hammett]

Quincy's a little far from Glen Ellyn. ;-) Point noted, though. 




We do have a relationship with a search firm. Just wanted to browse at what 
everyone was asking so I can setup our ask to be reasonable. 


I can do it, but I also have 1,400 other things to be doing. I do have a green 
guy, but I figured I'd see what was out there for people that already know what 
they're doing and can supplement the training we get. 




- 
Mike Hammett 
Intelligent Computing Solutions 

Midwest Internet Exchange 

The Brothers WISP 




- Original Message -

From: "Ken Hohhof"  
To: "AnimalFarm Microwave Users Group"  
Sent: Wednesday, June 26, 2019 4:55:51 PM 
Subject: Re: [AFMUG] Looking for Fiber Job Postings 



Maybe check out vocational schools and community colleges that offer courses 
leading to fiber optic certification. For example: 
https://www.jwcc.edu/business-resources/fiber-optic-training/ 

Given the state of the job market, I’m not sure you will find an experienced 
fiber tech just through advertising. Usually in a tight job market you need to 
use a search firm or somehow get a list of employees at a competitor that you 
can poach. 




From: AF  On Behalf Of Mike Hammett 
Sent: Wednesday, June 26, 2019 4:41 PM 
To: AnimalFarm Microwave Users Group  
Subject: [AFMUG] Looking for Fiber Job Postings 


I'm looking for places you see fiber-related job postings. I'm looking to see 
what everyone else is putting in their requests so I know how to best phrase 
mine. 



So far I've looked here: http://www.joink.com/careers and here: 
https://www.jdhcontracting.com/careers-at-jdh/ 





My ideal person is someone that can push\pull\blow fiber in existing conduit 
and can handle splicing it. 



I'll no doubt come up with other positions, but that's the itch that needs 
scratching. 



- 
Mike Hammett 
Intelligent Computing Solutions 

Midwest Internet Exchange 

The Brothers WISP 




-- 
AF mailing list 
AF@af.afmug.com 
http://af.afmug.com/mailman/listinfo/af_af.afmug.com 

-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] AirFiber24 repair

[Tim Withrow via AF]

Ahhh Man, I didn't even get a chance to follow the rainbow.. just archived the 
link.
On Wednesday, June 26, 2019 Nate Burke  wrote:
 Like I said, it was 2 years ago, but I had to go through support to verify the 
broken radios before it let me purchase it from the store.  They gave me a 
special code to use at the store.  
 
 Nate
 
 On 6/26/2019 4:48 PM, SmarterBroadband wrote:
  
 
#yiv9961407164 #yiv9961407164 -- _filtered #yiv9961407164 {panose-1:2 4 5 3 5 4 
6 3 2 4;} _filtered #yiv9961407164 {font-family:Calibri;panose-1:2 15 5 2 2 2 4 
3 2 4;}#yiv9961407164 #yiv9961407164 p.yiv9961407164MsoNormal, #yiv9961407164 
li.yiv9961407164MsoNormal, #yiv9961407164 div.yiv9961407164MsoNormal 
{margin:0in;margin-bottom:.0001pt;font-size:10.0pt;font-family:sans-serif;}#yiv9961407164
 a:link, #yiv9961407164 span.yiv9961407164MsoHyperlink 
{color:blue;text-decoration:underline;}#yiv9961407164 a:visited, #yiv9961407164 
span.yiv9961407164MsoHyperlinkFollowed 
{color:purple;text-decoration:underline;}#yiv9961407164 
p.yiv9961407164msonormal0, #yiv9961407164 li.yiv9961407164msonormal0, 
#yiv9961407164 div.yiv9961407164msonormal0 
{margin-right:0in;margin-left:0in;font-size:10.0pt;font-family:sans-serif;}#yiv9961407164
 p.yiv9961407164msonormal, #yiv9961407164 li.yiv9961407164msonormal, 
#yiv9961407164 div.yiv9961407164msonormal 
{margin-right:0in;margin-left:0in;font-size:10.0pt;font-family:sans-serif;}#yiv9961407164
 p.yiv9961407164msochpdefault, #yiv9961407164 li.yiv9961407164msochpdefault, 
#yiv9961407164 div.yiv9961407164msochpdefault 
{margin-right:0in;margin-left:0in;font-size:10.0pt;font-family:sans-serif;}#yiv9961407164
 span.yiv9961407164msohyperlink {}#yiv9961407164 
span.yiv9961407164msohyperlinkfollowed {}#yiv9961407164 
span.yiv9961407164emailstyle17 {}#yiv9961407164 p.yiv9961407164msonormal1, 
#yiv9961407164 li.yiv9961407164msonormal1, #yiv9961407164 
div.yiv9961407164msonormal1 
{margin:0in;margin-bottom:.0001pt;font-size:10.0pt;font-family:sans-serif;}#yiv9961407164
 span.yiv9961407164msohyperlink1 
{color:#0563C1;text-decoration:underline;}#yiv9961407164 
span.yiv9961407164msohyperlinkfollowed1 
{color:#954F72;text-decoration:underline;}#yiv9961407164 
span.yiv9961407164emailstyle171 
{font-family:sans-serif;color:windowtext;}#yiv9961407164 
p.yiv9961407164msochpdefault1, #yiv9961407164 li.yiv9961407164msochpdefault1, 
#yiv9961407164 div.yiv9961407164msochpdefault1 
{margin-right:0in;margin-left:0in;font-size:10.0pt;font-family:sans-serif;}#yiv9961407164
 span.yiv9961407164EmailStyle30 
{font-family:sans-serif;color:windowtext;}#yiv9961407164 
.yiv9961407164MsoChpDefault {font-size:10.0pt;} _filtered #yiv9961407164 
{margin:1.0in 1.0in 1.0in 1.0in;}#yiv9961407164 div.yiv9961407164WordSection1 
{}#yiv9961407164  
Followed the link and it says “Sold Out”…..
 
  
 
From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Tim Withrow via AF
 Sent: Monday, June 24, 2019 6:21 PM
 To: af@af.afmug.com
 Cc: Tim Withrow 
 Subject: Re: [AFMUG] AirFiber24 repair
 
  
 
Thanks for the tip
   
On Monday, June 24, 2019 Nate Burke  wrote:
   
There's an official repair channel through UBNT I Believe.   In 2017 I sent in 
2 broken AF24 radios, and they let me buy refurbed radios for $400 each.    
Everything was coordinated through Support and then ordered via the UBNT Store. 
 Unless thing have changed since then.
 
 https://store.ui.com/search?mockup=airfiber+repair=airfiber+repair*
 
 
 
 
   
On 6/24/2019 6:10 PM, SmarterBroadband wrote:
   
I have a couple of AirFiber24s that need repair.   
 
 
 
Anyone doing this?
 
 
 
Thanks
 
 
 
Adam
  

 
 
  
-- 
 AF mailing list
 AF@af.afmug.com
 http://af.afmug.com/mailman/listinfo/af_af.afmug.com

  
 
 -- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] OT Its 4:20 in Illinois now

[Bill Prince]

  
  
Don't know about rabbits, but those darn squirrels seem to be on
  something for sure.


bp



On 6/26/2019 2:46 PM, Ken Hohhof wrote:


  
  
  
  
No matter what I try to grow, all I get is
  weeds.  Not weed, just weeds.
 
And if some nice flower I buy at the garden
  center tries to survive, the rabbits eat it.  If you plant MJ
  and the rabbits eat it, do they get high?  And how would you
  tell?
 
From: AF
   On Behalf Of Steve
  Jones
  Sent: Wednesday, June 26, 2019 4:11 PM
  To: AnimalFarm Microwave Users Group
  
  Subject: Re: [AFMUG] OT Its 4:20 in Illinois now
 

  Im just pissed that I cant grow it, thats
all I wanted, that is a sexy plant, I have to get a medical
card if i wanna grow it. I was going to grow hemp so if it
got stole they would get sick. stupid politicians. Theyre
afraid it might create a black market for mary jane if we
could grow it.

 

  
On Wed, Jun 26, 2019 at 3:52 PM 
  wrote:
  
  

  

  
Party on
Ken (and Steve and)
  

  

-- 
  AF mailing list
  AF@af.afmug.com
  http://af.afmug.com/mailman/listinfo/af_af.afmug.com
  

  
  
  

  


-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] Looking for Fiber Job Postings

[chuck]

Push, pull, blow, splice is gonna cost you.  

From: Mike Hammett 
Sent: Wednesday, June 26, 2019 3:41 PM
To: AnimalFarm Microwave Users Group 
Subject: [AFMUG] Looking for Fiber Job Postings

I'm looking for places you see fiber-related job postings. I'm looking to see 
what everyone else is putting in their requests so I know how to best phrase 
mine. 

So far I've looked here: http://www.joink.com/careers and here: 
https://www.jdhcontracting.com/careers-at-jdh/


My ideal person is someone that can push\pull\blow fiber in existing conduit 
and can handle splicing it.

I'll no doubt come up with other positions, but that's the itch that needs 
scratching.




-
Mike Hammett
Intelligent Computing Solutions

Midwest Internet Exchange

The Brothers WISP








-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] OT Its 4:20 in Illinois now

[chuck]

A rabbit that is high will stare at you.

From: Ken Hohhof 
Sent: Wednesday, June 26, 2019 3:46 PM
To: 'AnimalFarm Microwave Users Group' 
Subject: Re: [AFMUG] OT Its 4:20 in Illinois now

No matter what I try to grow, all I get is weeds.  Not weed, just weeds.

 

And if some nice flower I buy at the garden center tries to survive, the 
rabbits eat it.  If you plant MJ and the rabbits eat it, do they get high?  And 
how would you tell?

 

From: AF  On Behalf Of Steve Jones
Sent: Wednesday, June 26, 2019 4:11 PM
To: AnimalFarm Microwave Users Group 
Subject: Re: [AFMUG] OT Its 4:20 in Illinois now

 

Im just pissed that I cant grow it, thats all I wanted, that is a sexy plant, I 
have to get a medical card if i wanna grow it. I was going to grow hemp so if 
it got stole they would get sick. stupid politicians. Theyre afraid it might 
create a black market for mary jane if we could grow it.

 

On Wed, Jun 26, 2019 at 3:52 PM  wrote:

  Party on Ken (and Steve and)

  -- 
  AF mailing list
  AF@af.afmug.com
  http://af.afmug.com/mailman/listinfo/af_af.afmug.com




-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] EPMP3000 and the Smart Antenna

[Nate Burke]

Good to know.  Nice that they put it prominently in all the sales 
literature.


On 6/26/2019 4:50 PM, Ryan Ray wrote:
Smart antenna is not active in current firmware. Cambium says the 
functionality is still months out.


On Wed, Jun 26, 2019 at 2:48 PM Nate Burke > wrote:


I just put up my first EPMP 3000 radio today.  I have the 4x4 sector
antenna, and a smart Antenna connected to it.  Due to scheduling
reasons, I was able to get the radio all programmed on the bench,
but I
couldn't connect the antennas until just before it went up the tower.
Is there anywhere in the 3000 that it tells you if the smart
antenna is
working, like on the EPMP2000 radio?  Or is the smart antenna not
functional yet until a later firmware.  The 2000 radio has the
section
on the status page talking about the smart antenna, I don't see
that in
the 3000 Status page.



-- 
AF mailing list

AF@af.afmug.com 
http://af.afmug.com/mailman/listinfo/af_af.afmug.com





-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] Looking for Fiber Job Postings

[Ken Hohhof]

Maybe check out vocational schools and community colleges that offer courses 
leading to fiber optic certification.  For example:

https://www.jwcc.edu/business-resources/fiber-optic-training/

 

Given the state of the job market, I’m not sure you will find an experienced 
fiber tech just through advertising.  Usually in a tight job market you need to 
use a search firm or somehow get a list of employees at a competitor that you 
can poach.

 

 

From: AF  On Behalf Of Mike Hammett
Sent: Wednesday, June 26, 2019 4:41 PM
To: AnimalFarm Microwave Users Group 
Subject: [AFMUG] Looking for Fiber Job Postings

 

I'm looking for places you see fiber-related job postings. I'm looking to see 
what everyone else is putting in their requests so I know how to best phrase 
mine.

 

So far I've looked here: http://www.joink.com/careers and here: 
https://www.jdhcontracting.com/careers-at-jdh/

 

 

My ideal person is someone that can push\pull\blow fiber in existing conduit 
and can handle splicing it.

 

I'll no doubt come up with other positions, but that's the itch that needs 
scratching.



-
Mike Hammett
  Intelligent Computing Solutions
   
  
  
 
  Midwest Internet Exchange
   
  
 
  The Brothers WISP
   
 




-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] AirFiber24 repair

[Nate Burke]

Like I said, it was 2 years ago, but I had to go through support to 
verify the broken radios before it let me purchase it from the store.  
They gave me a special code to use at the store.


Nate

On 6/26/2019 4:48 PM, SmarterBroadband wrote:


Followed the link and it says “Sold Out”…..

*From:*AF [mailto:af-boun...@af.afmug.com] *On Behalf Of *Tim Withrow 
via AF

*Sent:* Monday, June 24, 2019 6:21 PM
*To:* af@af.afmug.com
*Cc:* Tim Withrow 
*Subject:* Re: [AFMUG] AirFiber24 repair

Thanks for the tip



On Monday, June 24, 2019 Nate Burke > wrote:


There's an official repair channel through UBNT I Believe.   In 2017 I 
sent in 2 broken AF24 radios, and they let me buy refurbed radios for 
$400 each.Everything was coordinated through Support and then 
ordered via the UBNT Store.  Unless thing have changed since then.


https://store.ui.com/search?mockup=airfiber+repair=airfiber+repair*



On 6/24/2019 6:10 PM, SmarterBroadband wrote:

I have a couple of AirFiber24s that need repair.

Anyone doing this?

Thanks

Adam



--
AF mailing list
AF@af.afmug.com 
http://af.afmug.com/mailman/listinfo/af_af.afmug.com





-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] EPMP3000 and the Smart Antenna

[Ryan Ray]

Smart antenna is not active in current firmware. Cambium says the
functionality is still months out.

On Wed, Jun 26, 2019 at 2:48 PM Nate Burke  wrote:

> I just put up my first EPMP 3000 radio today.  I have the 4x4 sector
> antenna, and a smart Antenna connected to it.  Due to scheduling
> reasons, I was able to get the radio all programmed on the bench, but I
> couldn't connect the antennas until just before it went up the tower.
> Is there anywhere in the 3000 that it tells you if the smart antenna is
> working, like on the EPMP2000 radio?  Or is the smart antenna not
> functional yet until a later firmware.  The 2000 radio has the section
> on the status page talking about the smart antenna, I don't see that in
> the 3000 Status page.
>
>
>
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] EPMP3000 and the Smart Antenna

[Nate Burke]

Running the latest 4.3.2.1 firmware

On 6/26/2019 4:48 PM, Nate Burke wrote:
I just put up my first EPMP 3000 radio today.  I have the 4x4 sector 
antenna, and a smart Antenna connected to it.  Due to scheduling 
reasons, I was able to get the radio all programmed on the bench, but 
I couldn't connect the antennas until just before it went up the 
tower.  Is there anywhere in the 3000 that it tells you if the smart 
antenna is working, like on the EPMP2000 radio?  Or is the smart 
antenna not functional yet until a later firmware.  The 2000 radio has 
the section on the status page talking about the smart antenna, I 
don't see that in the 3000 Status page.







--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] AirFiber24 repair

[SmarterBroadband]

Followed the link and it says “Sold Out”…..

 

From: AF [mailto:af-boun...@af.afmug.com] On Behalf Of Tim Withrow via AF
Sent: Monday, June 24, 2019 6:21 PM
To: af@af.afmug.com
Cc: Tim Withrow 
Subject: Re: [AFMUG] AirFiber24 repair

 

Thanks for the tip

  _  

On Monday, June 24, 2019 Nate Burke mailto:af@af.afmug.com> > 
wrote:

There's an official repair channel through UBNT I Believe.   In 2017 I sent in 
2 broken AF24 radios, and they let me buy refurbed radios for $400 each.
Everything was coordinated through Support and then ordered via the UBNT Store. 
 Unless thing have changed since then.

https://store.ui.com/search?mockup=airfiber+repair 
 
=airfiber+repair*





On 6/24/2019 6:10 PM, SmarterBroadband wrote:

I have a couple of AirFiber24s that need repair.   

 

Anyone doing this?

 

Thanks

 

Adam





-- 
AF mailing list
AF@af.afmug.com  
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

[AFMUG] EPMP3000 and the Smart Antenna

[Nate Burke]

I just put up my first EPMP 3000 radio today.  I have the 4x4 sector 
antenna, and a smart Antenna connected to it.  Due to scheduling 
reasons, I was able to get the radio all programmed on the bench, but I 
couldn't connect the antennas until just before it went up the tower.  
Is there anywhere in the 3000 that it tells you if the smart antenna is 
working, like on the EPMP2000 radio?  Or is the smart antenna not 
functional yet until a later firmware.  The 2000 radio has the section 
on the status page talking about the smart antenna, I don't see that in 
the 3000 Status page.




--
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] OT Its 4:20 in Illinois now

[Ken Hohhof]

No matter what I try to grow, all I get is weeds.  Not weed, just weeds.

 

And if some nice flower I buy at the garden center tries to survive, the 
rabbits eat it.  If you plant MJ and the rabbits eat it, do they get high?  And 
how would you tell?

 

From: AF  On Behalf Of Steve Jones
Sent: Wednesday, June 26, 2019 4:11 PM
To: AnimalFarm Microwave Users Group 
Subject: Re: [AFMUG] OT Its 4:20 in Illinois now

 

Im just pissed that I cant grow it, thats all I wanted, that is a sexy plant, I 
have to get a medical card if i wanna grow it. I was going to grow hemp so if 
it got stole they would get sick. stupid politicians. Theyre afraid it might 
create a black market for mary jane if we could grow it.

 

On Wed, Jun 26, 2019 at 3:52 PM mailto:ch...@wbmfg.com> > 
wrote:

Party on Ken (and Steve and)

-- 
AF mailing list
AF@af.afmug.com  
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

[AFMUG] Looking for Fiber Job Postings

[Mike Hammett]

I'm looking for places you see fiber-related job postings. I'm looking to see 
what everyone else is putting in their requests so I know how to best phrase 
mine. 


So far I've looked here: http://www.joink.com/careers and here: 
https://www.jdhcontracting.com/careers-at-jdh/ 




My ideal person is someone that can push\pull\blow fiber in existing conduit 
and can handle splicing it. 


I'll no doubt come up with other positions, but that's the itch that needs 
scratching. 




- 
Mike Hammett 
Intelligent Computing Solutions 

Midwest Internet Exchange 

The Brothers WISP 




-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] OT Its 4:20 in Illinois now

[Steve Jones]

Im just pissed that I cant grow it, thats all I wanted, that is a sexy
plant, I have to get a medical card if i wanna grow it. I was going to grow
hemp so if it got stole they would get sick. stupid politicians. Theyre
afraid it might create a black market for mary jane if we could grow it.

On Wed, Jun 26, 2019 at 3:52 PM  wrote:

> Party on Ken (and Steve and)
> --
> AF mailing list
> AF@af.afmug.com
> http://af.afmug.com/mailman/listinfo/af_af.afmug.com
>
-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

[AFMUG] OT Its 4:20 in Illinois now

[chuck]

Party on Ken (and Steve and)-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] Google Calendar

[Adam Moffett]

A surprising number of people accepted.
To my knowledge we didn't get any extra guests on the call though.

On 6/25/2019 12:29 PM, Colin Stanners wrote:
Lol did all of those people mistakenly / jokingly click accept? Or 
were they just (like me) interested in learning about pole loading?


On Tue, Jun 25, 2019 at 11:17 AM Adam Moffett > wrote:


Ok, so again I apologize for the meeting invite on list.

I have deleted the item from my calendar.  When I deleted it I
selected
"don't send" status update to the invitees, and apparently it did
it anyway.

I never did figure out what resulted in my whole address book being
invited to the event either.  Apparently I'm getting old or something.

-Adam


-- 
AF mailing list

AF@af.afmug.com 
http://af.afmug.com/mailman/listinfo/af_af.afmug.com




-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] Google Calendar

[Adam Moffett]

I guess I'm not the only old man here.

On 6/25/2019 3:43 PM, Ken Hohhof wrote:


I didn’t accept it, yet it put a recurring appointment in my OUTLOOK 
calendar, which I don’t use, so I had to research how to delete it.  
It didn’t put it in my GOOGLE  calendar, which I do use.


*From:* AF  *On Behalf Of *Steve Jones
*Sent:* Tuesday, June 25, 2019 2:32 PM
*To:* AnimalFarm Microwave Users Group 
*Subject:* Re: [AFMUG] Google Calendar

this is pure BS. Theres no reason for you to be withholding from us, I 
had cleared my calendar for this event. We demand you invite us back, 
this is discrimination


On Tue, Jun 25, 2019 at 11:30 AM Colin Stanners > wrote:


Lol did all of those people mistakenly / jokingly click accept? Or
were they just (like me) interested in learning about pole loading?

On Tue, Jun 25, 2019 at 11:17 AM Adam Moffett mailto:dmmoff...@gmail.com>> wrote:

Ok, so again I apologize for the meeting invite on list.

I have deleted the item from my calendar.  When I deleted it I
selected
"don't send" status update to the invitees, and apparently it
did it anyway.

I never did figure out what resulted in my whole address book
being
invited to the event either.  Apparently I'm getting old or
something.

-Adam


-- 
AF mailing list

AF@af.afmug.com 
http://af.afmug.com/mailman/listinfo/af_af.afmug.com

-- 
AF mailing list

AF@af.afmug.com 
http://af.afmug.com/mailman/listinfo/af_af.afmug.com




-- 
AF mailing list
AF@af.afmug.com
http://af.afmug.com/mailman/listinfo/af_af.afmug.com