Re: [AFMUG] Multiple cable wall pass-through

2018-05-31 Thread Eric Kuhnke 
Choose a standard Andrew (Commscope) cable entry panel such as you would
find installed in the wall of a shelter.

https://www.commscope.com/catalog/wireless/product.aspx?id=24



On Fri, May 25, 2018 at 1:43 PM, Mike Davis  wrote:

> Any suggestions on where to get a cable wall pass-through for a 1/2" steel
> plate? I am out of ideas of where to try. I need to get 6 cat cables from
> the inside of a water tower to the outside at the top of the tower.
> --
> *Mike Davis*
> General Manager
> Office: 260-349-1799
> Email: *mikeda...@allianceinternet.net *
>
> *Alliance Internet Communications* | www.allianceinternet.net
> PO Box 1100 | 1220 South Wayne Street | Angola, IN | 46703
> 
> | 260-349-1799
>
>
>

Re: [AFMUG] Multiple cable wall pass-through

2018-05-30 Thread Robert 

I am assuming here you meant tannerite

On 5/30/18 10:59 AM, Dave wrote:
I heard Tenamite works well in these situations LOL kidding dont use 
that stuff



On 05/25/2018 10:16 PM, Steve Jones wrote:
you want six cables in one hole or 6 holes? 1/2 inch glands is what i 
use on single cables, available at any hardware store, they have like 
3/4" thread, so the lock nut would affix. Theyre cheaper in bulk than 
a hardware store, like 6 for 30 bucks at hardware store or 50 for 100 
bucks in bulk online


On Fri, May 25, 2018 at 3:48 PM, Bill Prince > wrote:


A 1" conduit bulkhead connector will do the trick. Attach a short
length of conduit on the outside with a sweep.

If the nipple on the bulkhead connector is not long enough, you
can get longer nipples at any hardware store (1" though 3 or 4
inches).

bp


On 5/25/2018 1:43 PM, Mike Davis wrote:


Any suggestions on where to get a cable wall pass-through for a
1/2" steel plate? I am out of ideas of where to try. I need to
get 6 cat cables from the inside of a water tower to the outside
at the top of the tower.

-- 
*Mike Davis*

General Manager
Office: 260-349-1799
Email: _mikeda...@allianceinternet.net
_

*Alliance Internet Communications* | www.allianceinternet.net

PO Box 1100 | 1220 South Wayne Street | Angola, IN | 46703


| 260-349-1799







--

Re: [AFMUG] Multiple cable wall pass-through

2018-05-30 Thread Dave 
I heard Tenamite works well in these situations LOL kidding dont use 
that stuff



On 05/25/2018 10:16 PM, Steve Jones wrote:
you want six cables in one hole or 6 holes? 1/2 inch glands is what i 
use on single cables, available at any hardware store, they have like 
3/4" thread, so the lock nut would affix. Theyre cheaper in bulk than 
a hardware store, like 6 for 30 bucks at hardware store or 50 for 100 
bucks in bulk online


On Fri, May 25, 2018 at 3:48 PM, Bill Prince > wrote:


A 1" conduit bulkhead connector will do the trick. Attach a short
length of conduit on the outside with a sweep.

If the nipple on the bulkhead connector is not long enough, you
can get longer nipples at any hardware store (1" though 3 or 4
inches).

bp


On 5/25/2018 1:43 PM, Mike Davis wrote:


Any suggestions on where to get a cable wall pass-through for a
1/2" steel plate? I am out of ideas of where to try. I need to
get 6 cat cables from the inside of a water tower to the outside
at the top of the tower.

-- 
*Mike Davis*

General Manager
Office: 260-349-1799
Email: _mikeda...@allianceinternet.net
_

*Alliance Internet Communications* | www.allianceinternet.net

PO Box 1100 | 1220 South Wayne Street | Angola, IN | 46703


| 260-349-1799







--

Re: [AFMUG] Multiple cable wall pass-through

2018-05-30 Thread Mike Davis 
Six cables through one hole - don't want any more holes than necessary 
in the water tower. I figure it will be easier to drill the one larger 
hole, too.


I had not thought about using a bulkhead connector. At this point, that 
seems like the best solution.


On 5/25/2018 11:16 PM, Steve Jones wrote:
you want six cables in one hole or 6 holes? 1/2 inch glands is what i 
use on single cables, available at any hardware store, they have like 
3/4" thread, so the lock nut would affix. Theyre cheaper in bulk than 
a hardware store, like 6 for 30 bucks at hardware store or 50 for 100 
bucks in bulk online


On Fri, May 25, 2018 at 3:48 PM, Bill Prince > wrote:


A 1" conduit bulkhead connector will do the trick. Attach a short
length of conduit on the outside with a sweep.

If the nipple on the bulkhead connector is not long enough, you
can get longer nipples at any hardware store (1" though 3 or 4
inches).

bp


On 5/25/2018 1:43 PM, Mike Davis wrote:


Any suggestions on where to get a cable wall pass-through for a
1/2" steel plate? I am out of ideas of where to try. I need to
get 6 cat cables from the inside of a water tower to the outside
at the top of the tower.

-- 
*Mike Davis*

General Manager
Office: 260-349-1799
Email: _mikeda...@allianceinternet.net
_

*Alliance Internet Communications* | www.allianceinternet.net

PO Box 1100 | 1220 South Wayne Street | Angola, IN | 46703


| 260-349-1799

Re: [AFMUG] Multiple cable wall pass-through

2018-05-30 Thread Chuck McCown 
Plasma or acetylene. 

From: Steve Jones 
Sent: Friday, May 25, 2018 9:16 PM
To: af@afmug.com 
Subject: Re: [AFMUG] Multiple cable wall pass-through

you want six cables in one hole or 6 holes? 1/2 inch glands is what i use on 
single cables, available at any hardware store, they have like 3/4" thread, so 
the lock nut would affix. Theyre cheaper in bulk than a hardware store, like 6 
for 30 bucks at hardware store or 50 for 100 bucks in bulk online

On Fri, May 25, 2018 at 3:48 PM, Bill Prince  wrote:

  A 1" conduit bulkhead connector will do the trick. Attach a short length of 
conduit on the outside with a sweep. 


  If the nipple on the bulkhead connector is not long enough, you can get 
longer nipples at any hardware store (1" though 3 or 4 inches).


bp


On 5/25/2018 1:43 PM, Mike Davis wrote:

Any suggestions on where to get a cable wall pass-through for a 1/2" steel 
plate? I am out of ideas of where to try. I need to get 6 cat cables from the 
inside of a water tower to the outside at the top of the tower.

-- 
Mike Davis
General Manager
Office: 260-349-1799
Email: mikeda...@allianceinternet.net

Alliance Internet Communications | www.allianceinternet.net
PO Box 1100 | 1220 South Wayne Street | Angola, IN | 46703 | 260-349-1799

Re: [AFMUG] Multiple cable wall pass-through

2018-05-25 Thread Steve Jones 
you want six cables in one hole or 6 holes? 1/2 inch glands is what i use
on single cables, available at any hardware store, they have like 3/4"
thread, so the lock nut would affix. Theyre cheaper in bulk than a hardware
store, like 6 for 30 bucks at hardware store or 50 for 100 bucks in bulk
online

On Fri, May 25, 2018 at 3:48 PM, Bill Prince  wrote:

> A 1" conduit bulkhead connector will do the trick. Attach a short length
> of conduit on the outside with a sweep.
>
> If the nipple on the bulkhead connector is not long enough, you can get
> longer nipples at any hardware store (1" though 3 or 4 inches).
>
> bp
> 
>
>
> On 5/25/2018 1:43 PM, Mike Davis wrote:
>
> Any suggestions on where to get a cable wall pass-through for a 1/2" steel
> plate? I am out of ideas of where to try. I need to get 6 cat cables from
> the inside of a water tower to the outside at the top of the tower.
> --
> *Mike Davis*
> General Manager
> Office: 260-349-1799
> Email: *mikeda...@allianceinternet.net *
>
> *Alliance Internet Communications* | www.allianceinternet.net
> PO Box 1100 | 1220 South Wayne Street | Angola, IN | 46703
> 
> | 260-349-1799
>
>
>
>

Re: [AFMUG] Multiple cable wall pass-through

2018-05-25 Thread Bill Prince 
A 1" conduit bulkhead connector will do the trick. Attach a short length 
of conduit on the outside with a sweep.


If the nipple on the bulkhead connector is not long enough, you can get 
longer nipples at any hardware store (1" though 3 or 4 inches).


bp


On 5/25/2018 1:43 PM, Mike Davis wrote:


Any suggestions on where to get a cable wall pass-through for a 1/2" 
steel plate? I am out of ideas of where to try. I need to get 6 cat 
cables from the inside of a water tower to the outside at the top of 
the tower.


--
*Mike Davis*
General Manager
Office: 260-349-1799
Email: _mikeda...@allianceinternet.net 
_


*Alliance Internet Communications* | www.allianceinternet.net 


PO Box 1100 | 1220 South Wayne Street | Angola, IN | 46703 | 260-349-1799

[AFMUG] Multiple cable wall pass-through

2018-05-25 Thread Mike Davis 
Any suggestions on where to get a cable wall pass-through for a 1/2" 
steel plate? I am out of ideas of where to try. I need to get 6 cat 
cables from the inside of a water tower to the outside at the top of the 
tower.


--
*Mike Davis*
General Manager
Office: 260-349-1799
Email: _mikeda...@allianceinternet.net 
_


*Alliance Internet Communications* | www.allianceinternet.net 


PO Box 1100 | 1220 South Wayne Street | Angola, IN | 46703 | 260-349-1799