Re: [AFMUG] Wireless HDMI

[Chuck McCown]

Which one is this?

-Original Message- 
From: Paul McCall

Sent: Thursday, March 30, 2017 9:43 AM
To: af@afmug.com
Subject: Re: [AFMUG] Wireless HDMI

Reporting back after a couple hours in use.

This one works very well.  Fast refresh.  Watching videos is as smooth as my 
normal monitor


Paul

-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Seth Mattinen
Sent: Tuesday, March 28, 2017 6:15 PM
To: af@afmug.com
Subject: Re: [AFMUG] Wireless HDMI

On 3/28/17 12:16, Paul McCall wrote:

I will report after I try the 60ghz one



I have an older model DVDO 60GHz HDMI thing for a projector. Sometimes it 
gets angry to where the HDMI won't handshake (hooray for copy
protection) and I have to power cycle them. It's also significantly slower 
to re-sync when resolutions change compared to a cable. Other than that it's 
great. I haven't tried their current model to see of those issues have been 
improved.


~Seth 

Re: [AFMUG] Wireless HDMI

[Paul McCall]

https://www.youtube.com/watch?v=b12_UcmjWNc


-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Paul McCall
Sent: Thursday, March 30, 2017 11:43 AM
To: af@afmug.com
Subject: Re: [AFMUG] Wireless HDMI

Reporting back after a couple hours in use.

This one works very well.  Fast refresh.  Watching videos is as smooth as my 
normal monitor

Paul

-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Seth Mattinen
Sent: Tuesday, March 28, 2017 6:15 PM
To: af@afmug.com
Subject: Re: [AFMUG] Wireless HDMI

On 3/28/17 12:16, Paul McCall wrote:
> I will report after I try the 60ghz one


I have an older model DVDO 60GHz HDMI thing for a projector. Sometimes it gets 
angry to where the HDMI won't handshake (hooray for copy
protection) and I have to power cycle them. It's also significantly slower to 
re-sync when resolutions change compared to a cable. Other than that it's 
great. I haven't tried their current model to see of those issues have been 
improved.

~Seth

Re: [AFMUG] Wireless HDMI

[Paul McCall]

Reporting back after a couple hours in use.

This one works very well.  Fast refresh.  Watching videos is as smooth as my 
normal monitor

Paul

-Original Message-
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Seth Mattinen
Sent: Tuesday, March 28, 2017 6:15 PM
To: af@afmug.com
Subject: Re: [AFMUG] Wireless HDMI

On 3/28/17 12:16, Paul McCall wrote:
> I will report after I try the 60ghz one


I have an older model DVDO 60GHz HDMI thing for a projector. Sometimes it gets 
angry to where the HDMI won't handshake (hooray for copy
protection) and I have to power cycle them. It's also significantly slower to 
re-sync when resolutions change compared to a cable. Other than that it's 
great. I haven't tried their current model to see of those issues have been 
improved.

~Seth

Re: [AFMUG] Wireless HDMI

[Seth Mattinen]

On 3/28/17 12:16, Paul McCall wrote:

I will report after I try the 60ghz one



I have an older model DVDO 60GHz HDMI thing for a projector. Sometimes 
it gets angry to where the HDMI won't handshake (hooray for copy 
protection) and I have to power cycle them. It's also significantly 
slower to re-sync when resolutions change compared to a cable. Other 
than that it's great. I haven't tried their current model to see of 
those issues have been improved.


~Seth

Re: [AFMUG] Wireless HDMI

[Paul McCall]

Solid ceiling, then goes up about a ft. of hard A/C duct before I could angle 
something towards an “outside” interior wall.  would have to cut an access in 
the ceiling to get above the 1ft mark and get my arm and drill from up above it 
laterally,

If it were being sent out to bid, I would “No-Bid” it   $ 150 for the 
electronics, if it solves the problem, works for me.
From: Af [mailto:af-boun...@afmug.com] On Behalf Of ch...@wbmfg.com
Sent: Tuesday, March 28, 2017 3:32 PM
To: af@afmug.com
Subject: Re: [AFMUG] Wireless HDMI

But if you get in the ceiling down below, you can drill sizeways to an area 
above with access.

From: Paul McCall
Sent: Tuesday, March 28, 2017 1:23 PM
To: af@afmug.com<mailto:af@afmug.com>
Subject: Re: [AFMUG] Wireless HDMI

If my life depended on finding a way, then yeah, I could make a new path 

Ripping up a floor with equipment on it currently to get to my ceiling is not 
my idea of a good time.



From: Af [mailto:af-boun...@afmug.com] On Behalf Of 
ch...@wbmfg.com<mailto:ch...@wbmfg.com>
Sent: Tuesday, March 28, 2017 3:04 PM
To: af@afmug.com<mailto:af@afmug.com>
Subject: Re: [AFMUG] Wireless HDMI

I have used those super long flexible drill bits to place cables in impossible 
locations before.

From: Paul McCall
Sent: Tuesday, March 28, 2017 1:00 PM
To: af@afmug.com<mailto:af@afmug.com>
Subject: Re: [AFMUG] Wireless HDMI

No chance we can pull it through.  Long story on the construction that has 
taken place after this was put in, but yeah, no chance

From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Reynolds
Sent: Tuesday, March 28, 2017 2:27 PM
To: af@afmug.com<mailto:af@afmug.com>
Subject: Re: [AFMUG] Wireless HDMI

No ability to tape one end of the old cable to the new one and pull it through?

On Mar 28, 2017 1:18 PM, "Paul McCall" 
<pa...@pdmnet.net<mailto:pa...@pdmnet.net>> wrote:
Anybody have a wireless HDMI transmitter receiver that they are in love with?

We have a ceiling mount projector that we replaced recently with an Optomo.  
The old projector that got replaced worked with the HDMI that we ran 10 years 
ago when we built the room, but the new one won’t.  I tried a couple of the 
“boosters” and they don’t work for me.  We ran a long New cable with better 
specs and it works just fine.  It’s a HUGE undertaking to remove the floor of 
the unit above us to get to a place where we could replace the existing one, so 
looking for wireless.

It would be LOS to my desktop PC at about 20 feet away (at the most).

Paul

Paul McCall, President
PDMNet, Inc. / Florida Broadband, Inc.
658 Old Dixie Highway
Vero Beach, FL 32962
772-564-6800<tel:(772)%20564-6800>
pa...@pdmnet.net<mailto:pa...@pdmnet.net>
www.pdmnet.com<http://www.pdmnet.com>
www.floridabroadband.com<http://www.floridabroadband.com>

Re: [AFMUG] Wireless HDMI

[chuck]

But if you get in the ceiling down below, you can drill sizeways to an area 
above with access.  

From: Paul McCall 
Sent: Tuesday, March 28, 2017 1:23 PM
To: af@afmug.com 
Subject: Re: [AFMUG] Wireless HDMI

If my life depended on finding a way, then yeah, I could make a new path 

 

Ripping up a floor with equipment on it currently to get to my ceiling is not 
my idea of a good time.

 

 

 

From: Af [mailto:af-boun...@afmug.com] On Behalf Of ch...@wbmfg.com
Sent: Tuesday, March 28, 2017 3:04 PM
To: af@afmug.com
Subject: Re: [AFMUG] Wireless HDMI

 

I have used those super long flexible drill bits to place cables in impossible 
locations before.  

 

From: Paul McCall 

Sent: Tuesday, March 28, 2017 1:00 PM

To: af@afmug.com 

Subject: Re: [AFMUG] Wireless HDMI

 

No chance we can pull it through.  Long story on the construction that has 
taken place after this was put in, but yeah, no chance

 

From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Reynolds
Sent: Tuesday, March 28, 2017 2:27 PM
To: af@afmug.com
Subject: Re: [AFMUG] Wireless HDMI

 

No ability to tape one end of the old cable to the new one and pull it through?

 

On Mar 28, 2017 1:18 PM, "Paul McCall" <pa...@pdmnet.net> wrote:

  Anybody have a wireless HDMI transmitter receiver that they are in love with? 
 

   

  We have a ceiling mount projector that we replaced recently with an Optomo.  
The old projector that got replaced worked with the HDMI that we ran 10 years 
ago when we built the room, but the new one won’t.  I tried a couple of the 
“boosters” and they don’t work for me.  We ran a long New cable with better 
specs and it works just fine.  It’s a HUGE undertaking to remove the floor of 
the unit above us to get to a place where we could replace the existing one, so 
looking for wireless.

   

  It would be LOS to my desktop PC at about 20 feet away (at the most).

   

  Paul

   

  Paul McCall, President

  PDMNet, Inc. / Florida Broadband, Inc.

  658 Old Dixie Highway

  Vero Beach, FL 32962

  772-564-6800  

  pa...@pdmnet.net

  www.pdmnet.com

  www.floridabroadband.com

   

   

Re: [AFMUG] Wireless HDMI

[Paul McCall]

If my life depended on finding a way, then yeah, I could make a new path 

Ripping up a floor with equipment on it currently to get to my ceiling is not 
my idea of a good time.



From: Af [mailto:af-boun...@afmug.com] On Behalf Of ch...@wbmfg.com
Sent: Tuesday, March 28, 2017 3:04 PM
To: af@afmug.com
Subject: Re: [AFMUG] Wireless HDMI

I have used those super long flexible drill bits to place cables in impossible 
locations before.

From: Paul McCall
Sent: Tuesday, March 28, 2017 1:00 PM
To: af@afmug.com<mailto:af@afmug.com>
Subject: Re: [AFMUG] Wireless HDMI

No chance we can pull it through.  Long story on the construction that has 
taken place after this was put in, but yeah, no chance

From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Reynolds
Sent: Tuesday, March 28, 2017 2:27 PM
To: af@afmug.com<mailto:af@afmug.com>
Subject: Re: [AFMUG] Wireless HDMI

No ability to tape one end of the old cable to the new one and pull it through?

On Mar 28, 2017 1:18 PM, "Paul McCall" 
<pa...@pdmnet.net<mailto:pa...@pdmnet.net>> wrote:
Anybody have a wireless HDMI transmitter receiver that they are in love with?

We have a ceiling mount projector that we replaced recently with an Optomo.  
The old projector that got replaced worked with the HDMI that we ran 10 years 
ago when we built the room, but the new one won’t.  I tried a couple of the 
“boosters” and they don’t work for me.  We ran a long New cable with better 
specs and it works just fine.  It’s a HUGE undertaking to remove the floor of 
the unit above us to get to a place where we could replace the existing one, so 
looking for wireless.

It would be LOS to my desktop PC at about 20 feet away (at the most).

Paul

Paul McCall, President
PDMNet, Inc. / Florida Broadband, Inc.
658 Old Dixie Highway
Vero Beach, FL 32962
772-564-6800<tel:(772)%20564-6800>
pa...@pdmnet.net<mailto:pa...@pdmnet.net>
www.pdmnet.com<http://www.pdmnet.com>
www.floridabroadband.com<http://www.floridabroadband.com>

Re: [AFMUG] Wireless HDMI

[Paul McCall]

I will report after I try the 60ghz one

From: Af [mailto:af-boun...@afmug.com] On Behalf Of ch...@wbmfg.com
Sent: Tuesday, March 28, 2017 3:04 PM
To: af@afmug.com
Subject: Re: [AFMUG] Wireless HDMI

I have used those super long flexible drill bits to place cables in impossible 
locations before.

From: Paul McCall
Sent: Tuesday, March 28, 2017 1:00 PM
To: af@afmug.com<mailto:af@afmug.com>
Subject: Re: [AFMUG] Wireless HDMI

No chance we can pull it through.  Long story on the construction that has 
taken place after this was put in, but yeah, no chance

From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Reynolds
Sent: Tuesday, March 28, 2017 2:27 PM
To: af@afmug.com<mailto:af@afmug.com>
Subject: Re: [AFMUG] Wireless HDMI

No ability to tape one end of the old cable to the new one and pull it through?

On Mar 28, 2017 1:18 PM, "Paul McCall" 
<pa...@pdmnet.net<mailto:pa...@pdmnet.net>> wrote:
Anybody have a wireless HDMI transmitter receiver that they are in love with?

We have a ceiling mount projector that we replaced recently with an Optomo.  
The old projector that got replaced worked with the HDMI that we ran 10 years 
ago when we built the room, but the new one won’t.  I tried a couple of the 
“boosters” and they don’t work for me.  We ran a long New cable with better 
specs and it works just fine.  It’s a HUGE undertaking to remove the floor of 
the unit above us to get to a place where we could replace the existing one, so 
looking for wireless.

It would be LOS to my desktop PC at about 20 feet away (at the most).

Paul

Paul McCall, President
PDMNet, Inc. / Florida Broadband, Inc.
658 Old Dixie Highway
Vero Beach, FL 32962
772-564-6800<tel:(772)%20564-6800>
pa...@pdmnet.net<mailto:pa...@pdmnet.net>
www.pdmnet.com<http://www.pdmnet.com>
www.floridabroadband.com<http://www.floridabroadband.com>

Re: [AFMUG] Wireless HDMI

[Paul McCall]

There a couple on Amazon that use 5.8 autoswitching, could work here.  I found 
a 60ghz one for $ 150 there, and I ordered it.  We’ll see

Paul

From: Af [mailto:af-boun...@afmug.com] On Behalf Of Jaime Solorza
Sent: Tuesday, March 28, 2017 2:37 PM
To: Animal Farm <af@afmug.com>
Subject: Re: [AFMUG] Wireless HDMI

There is one that works on 60Ghz

On Mar 28, 2017 12:29 PM, <ch...@wbmfg.com<mailto:ch...@wbmfg.com>> wrote:
I think we could all use this.  I use an HDMI-over-two-CAT5 device to pipe it 
around my house.

From: Josh Reynolds
Sent: Tuesday, March 28, 2017 12:26 PM
To: af@afmug.com<mailto:af@afmug.com>
Subject: Re: [AFMUG] Wireless HDMI

No ability to tape one end of the old cable to the new one and pull it through?

On Mar 28, 2017 1:18 PM, "Paul McCall" 
<pa...@pdmnet.net<mailto:pa...@pdmnet.net>> wrote:
Anybody have a wireless HDMI transmitter receiver that they are in love with?

We have a ceiling mount projector that we replaced recently with an Optomo.  
The old projector that got replaced worked with the HDMI that we ran 10 years 
ago when we built the room, but the new one won’t.  I tried a couple of the 
“boosters” and they don’t work for me.  We ran a long New cable with better 
specs and it works just fine.  It’s a HUGE undertaking to remove the floor of 
the unit above us to get to a place where we could replace the existing one, so 
looking for wireless.

It would be LOS to my desktop PC at about 20 feet away (at the most).

Paul

Paul McCall, President
PDMNet, Inc. / Florida Broadband, Inc.
658 Old Dixie Highway
Vero Beach, FL 32962
772-564-6800<tel:(772)%20564-6800>
pa...@pdmnet.net<mailto:pa...@pdmnet.net>
www.pdmnet.com<http://www.pdmnet.com>
www.floridabroadband.com<http://www.floridabroadband.com>

Re: [AFMUG] Wireless HDMI

[chuck]

I have used those super long flexible drill bits to place cables in impossible 
locations before.  

From: Paul McCall 
Sent: Tuesday, March 28, 2017 1:00 PM
To: af@afmug.com 
Subject: Re: [AFMUG] Wireless HDMI

No chance we can pull it through.  Long story on the construction that has 
taken place after this was put in, but yeah, no chance

 

From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Reynolds
Sent: Tuesday, March 28, 2017 2:27 PM
To: af@afmug.com
Subject: Re: [AFMUG] Wireless HDMI

 

No ability to tape one end of the old cable to the new one and pull it through?

 

On Mar 28, 2017 1:18 PM, "Paul McCall" <pa...@pdmnet.net> wrote:

  Anybody have a wireless HDMI transmitter receiver that they are in love with? 
 

   

  We have a ceiling mount projector that we replaced recently with an Optomo.  
The old projector that got replaced worked with the HDMI that we ran 10 years 
ago when we built the room, but the new one won’t.  I tried a couple of the 
“boosters” and they don’t work for me.  We ran a long New cable with better 
specs and it works just fine.  It’s a HUGE undertaking to remove the floor of 
the unit above us to get to a place where we could replace the existing one, so 
looking for wireless.

   

  It would be LOS to my desktop PC at about 20 feet away (at the most).

   

  Paul

   

  Paul McCall, President

  PDMNet, Inc. / Florida Broadband, Inc.

  658 Old Dixie Highway

  Vero Beach, FL 32962

  772-564-6800  

  pa...@pdmnet.net

  www.pdmnet.com

  www.floridabroadband.com

   

   

Re: [AFMUG] Wireless HDMI

[Paul McCall]

No chance we can pull it through.  Long story on the construction that has 
taken place after this was put in, but yeah, no chance

From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Reynolds
Sent: Tuesday, March 28, 2017 2:27 PM
To: af@afmug.com
Subject: Re: [AFMUG] Wireless HDMI

No ability to tape one end of the old cable to the new one and pull it through?

On Mar 28, 2017 1:18 PM, "Paul McCall" 
<pa...@pdmnet.net<mailto:pa...@pdmnet.net>> wrote:
Anybody have a wireless HDMI transmitter receiver that they are in love with?

We have a ceiling mount projector that we replaced recently with an Optomo.  
The old projector that got replaced worked with the HDMI that we ran 10 years 
ago when we built the room, but the new one won’t.  I tried a couple of the 
“boosters” and they don’t work for me.  We ran a long New cable with better 
specs and it works just fine.  It’s a HUGE undertaking to remove the floor of 
the unit above us to get to a place where we could replace the existing one, so 
looking for wireless.

It would be LOS to my desktop PC at about 20 feet away (at the most).

Paul

Paul McCall, President
PDMNet, Inc. / Florida Broadband, Inc.
658 Old Dixie Highway
Vero Beach, FL 32962
772-564-6800<tel:(772)%20564-6800>
pa...@pdmnet.net<mailto:pa...@pdmnet.net>
www.pdmnet.com<http://www.pdmnet.com>
www.floridabroadband.com<http://www.floridabroadband.com>

Re: [AFMUG] Wireless HDMI

[Jaime Solorza]

There is one that works on 60Ghz

On Mar 28, 2017 12:29 PM, <ch...@wbmfg.com> wrote:

> I think we could all use this.  I use an HDMI-over-two-CAT5 device to pipe
> it around my house.
>
> *From:* Josh Reynolds
> *Sent:* Tuesday, March 28, 2017 12:26 PM
> *To:* af@afmug.com
> *Subject:* Re: [AFMUG] Wireless HDMI
>
> No ability to tape one end of the old cable to the new one and pull it
> through?
>
> On Mar 28, 2017 1:18 PM, "Paul McCall" <pa...@pdmnet.net> wrote:
>
>> Anybody have a wireless HDMI transmitter receiver that they are in love
>> with?
>>
>>
>>
>> We have a ceiling mount projector that we replaced recently with an
>> Optomo.  The old projector that got replaced worked with the HDMI that we
>> ran 10 years ago when we built the room, but the new one won’t.  I tried a
>> couple of the “boosters” and they don’t work for me.  We ran a long New
>> cable with better specs and it works just fine.  It’s a HUGE undertaking to
>> remove the floor of the unit above us to get to a place where we could
>> replace the existing one, so looking for wireless.
>>
>>
>>
>> It would be LOS to my desktop PC at about 20 feet away (at the most).
>>
>>
>>
>> Paul
>>
>>
>>
>> Paul McCall, President
>>
>> PDMNet, Inc. / Florida Broadband, Inc.
>>
>> 658 Old Dixie Highway
>>
>> Vero Beach, FL 32962
>>
>> 772-564-6800 <(772)%20564-6800>
>>
>> pa...@pdmnet.net
>>
>> www.pdmnet.com
>>
>> www.floridabroadband.com
>>
>>
>>
>>
>>
>

Re: [AFMUG] Wireless HDMI

[chuck]

I think we could all use this.  I use an HDMI-over-two-CAT5 device to pipe it 
around my house.  

From: Josh Reynolds 
Sent: Tuesday, March 28, 2017 12:26 PM
To: af@afmug.com 
Subject: Re: [AFMUG] Wireless HDMI

No ability to tape one end of the old cable to the new one and pull it through?

On Mar 28, 2017 1:18 PM, "Paul McCall" <pa...@pdmnet.net> wrote:

  Anybody have a wireless HDMI transmitter receiver that they are in love with? 
 



  We have a ceiling mount projector that we replaced recently with an Optomo.  
The old projector that got replaced worked with the HDMI that we ran 10 years 
ago when we built the room, but the new one won’t.  I tried a couple of the 
“boosters” and they don’t work for me.  We ran a long New cable with better 
specs and it works just fine.  It’s a HUGE undertaking to remove the floor of 
the unit above us to get to a place where we could replace the existing one, so 
looking for wireless.



  It would be LOS to my desktop PC at about 20 feet away (at the most).



  Paul



  Paul McCall, President

  PDMNet, Inc. / Florida Broadband, Inc.

  658 Old Dixie Highway

  Vero Beach, FL 32962

  772-564-6800  

  pa...@pdmnet.net

  www.pdmnet.com

  www.floridabroadband.com

Re: [AFMUG] Wireless HDMI

[Josh Reynolds]

No ability to tape one end of the old cable to the new one and pull it
through?

On Mar 28, 2017 1:18 PM, "Paul McCall"  wrote:

> Anybody have a wireless HDMI transmitter receiver that they are in love
> with?
>
>
>
> We have a ceiling mount projector that we replaced recently with an
> Optomo.  The old projector that got replaced worked with the HDMI that we
> ran 10 years ago when we built the room, but the new one won’t.  I tried a
> couple of the “boosters” and they don’t work for me.  We ran a long New
> cable with better specs and it works just fine.  It’s a HUGE undertaking to
> remove the floor of the unit above us to get to a place where we could
> replace the existing one, so looking for wireless.
>
>
>
> It would be LOS to my desktop PC at about 20 feet away (at the most).
>
>
>
> Paul
>
>
>
> Paul McCall, President
>
> PDMNet, Inc. / Florida Broadband, Inc.
>
> 658 Old Dixie Highway
>
> Vero Beach, FL 32962
>
> 772-564-6800 <(772)%20564-6800>
>
> pa...@pdmnet.net
>
> www.pdmnet.com
>
> www.floridabroadband.com
>
>
>
>
>

[AFMUG] Wireless HDMI

[Paul McCall]

Anybody have a wireless HDMI transmitter receiver that they are in love with?

We have a ceiling mount projector that we replaced recently with an Optomo.  
The old projector that got replaced worked with the HDMI that we ran 10 years 
ago when we built the room, but the new one won't.  I tried a couple of the 
"boosters" and they don't work for me.  We ran a long New cable with better 
specs and it works just fine.  It's a HUGE undertaking to remove the floor of 
the unit above us to get to a place where we could replace the existing one, so 
looking for wireless.

It would be LOS to my desktop PC at about 20 feet away (at the most).

Paul

Paul McCall, President
PDMNet, Inc. / Florida Broadband, Inc.
658 Old Dixie Highway
Vero Beach, FL 32962
772-564-6800
pa...@pdmnet.net
www.pdmnet.com
www.floridabroadband.com