Re: [Asterisk-Users] Chan_H323, G729 (minor problem)
ok ... I removed the dtmfmode=inband from the h323.conf file which resulted in the error messages vanishing .. ya I thought ... alas DTMF tones sent to an IVR at the other end of the connection do not work either!!! My incoming calls are coming from PSTN lines through an E1 so DTMF must be inline .. THe (thousands of) error messages aren't really a problem, just annoying. Dave - Original Message - From: Martin Pycko [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, July 15, 2003 4:28 PM Subject: Re: [Asterisk-Users] Chan_H323, G729 (minor problem) You're trying to detect inband dtmfs from the codec stream. Martin On Tue, 15 Jul 2003, Dave Alan Caruana wrote: hi .. I have finally managed to get Chan_H323 G729 working flawlessly, thanks to some help from Jerry McNamara. For those out there who are stuck with the same problem the procedure is : 1. install on RedHat 8.0 and nothing else (RH9 doesn't work!) 2. Install asterisk, zaptel etc. the normal way 3. Compile Pwlib oH323 with versions taken from nufone's site (http://www.nufone.net/downloads) since the latest versions do not have support for G729. Remember to set the environment versions as described in the Readme files. 4. Modify the makefile of chan_h323 (which is in /usr/src/asterisk/channels/h323) to re-enable the G729 code. 5. in h323.conf put in allow=g729 and you should have a working configuration .. now for my question .. during G729 calls I am getting repeatedly the message WARNING[311314]: File dsp.c, Line 1198 (ast_dsp_process): Unable to detect process 256 frames this scrolls up the screen at a very high rate of knots.. the call is unaffected and goes through normally. Is this something wrong? normal? can it be fixed/suppressed? cheers Dave ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Chan_H323, G729 (minor problem)
dtmfmode=rfc2833 or dtmfmode=info try that instead Martin On Thu, 17 Jul 2003, Dave Alan Caruana wrote: ok ... I removed the dtmfmode=inband from the h323.conf file which resulted in the error messages vanishing .. ya I thought ... alas DTMF tones sent to an IVR at the other end of the connection do not work either!!! My incoming calls are coming from PSTN lines through an E1 so DTMF must be inline .. THe (thousands of) error messages aren't really a problem, just annoying. Dave - Original Message - From: Martin Pycko [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, July 15, 2003 4:28 PM Subject: Re: [Asterisk-Users] Chan_H323, G729 (minor problem) You're trying to detect inband dtmfs from the codec stream. Martin On Tue, 15 Jul 2003, Dave Alan Caruana wrote: hi .. I have finally managed to get Chan_H323 G729 working flawlessly, thanks to some help from Jerry McNamara. For those out there who are stuck with the same problem the procedure is : 1. install on RedHat 8.0 and nothing else (RH9 doesn't work!) 2. Install asterisk, zaptel etc. the normal way 3. Compile Pwlib oH323 with versions taken from nufone's site (http://www.nufone.net/downloads) since the latest versions do not have support for G729. Remember to set the environment versions as described in the Readme files. 4. Modify the makefile of chan_h323 (which is in /usr/src/asterisk/channels/h323) to re-enable the G729 code. 5. in h323.conf put in allow=g729 and you should have a working configuration .. now for my question .. during G729 calls I am getting repeatedly the message WARNING[311314]: File dsp.c, Line 1198 (ast_dsp_process): Unable to detect process 256 frames this scrolls up the screen at a very high rate of knots.. the call is unaffected and goes through normally. Is this something wrong? normal? can it be fixed/suppressed? cheers Dave ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Chan_H323, G729 (minor problem)
hi .. I have finally managed to get Chan_H323 G729 working flawlessly, thanks to some help from Jerry McNamara. For those out there who are stuck with the same problem the procedure is : 1. install on RedHat 8.0 and nothing else (RH9 doesn't work!) 2. Install asterisk, zaptel etc. the normal way 3. Compile Pwlib oH323 with versions taken from nufone's site (http://www.nufone.net/downloads) since the latest versions do not have support for G729. Remember to set the environment versions as described in the Readme files. 4. Modify the makefile of chan_h323 (which is in /usr/src/asterisk/channels/h323) to re-enable the G729 code. 5. in h323.conf put in allow=g729 and you should have a working configuration .. now for my question .. during G729 calls I am getting repeatedly the message WARNING[311314]: File dsp.c, Line 1198 (ast_dsp_process): Unable to detect process 256 frames this scrolls up the screen at a very high rate of knots.. the call is unaffected and goes through normally. Is this something wrong? normal? can it be fixed/suppressed? cheers Dave ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Chan_H323, G729 (minor problem)
You're trying to detect inband dtmfs from the codec stream. Martin On Tue, 15 Jul 2003, Dave Alan Caruana wrote: hi .. I have finally managed to get Chan_H323 G729 working flawlessly, thanks to some help from Jerry McNamara. For those out there who are stuck with the same problem the procedure is : 1. install on RedHat 8.0 and nothing else (RH9 doesn't work!) 2. Install asterisk, zaptel etc. the normal way 3. Compile Pwlib oH323 with versions taken from nufone's site (http://www.nufone.net/downloads) since the latest versions do not have support for G729. Remember to set the environment versions as described in the Readme files. 4. Modify the makefile of chan_h323 (which is in /usr/src/asterisk/channels/h323) to re-enable the G729 code. 5. in h323.conf put in allow=g729 and you should have a working configuration .. now for my question .. during G729 calls I am getting repeatedly the message WARNING[311314]: File dsp.c, Line 1198 (ast_dsp_process): Unable to detect process 256 frames this scrolls up the screen at a very high rate of knots.. the call is unaffected and goes through normally. Is this something wrong? normal? can it be fixed/suppressed? cheers Dave ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users