[Asterisk-Users] Re: can't make my PRI dial out
On April 22, 2005 05:35 pm, Mark Phillips wrote: Ext: 1 Cause: Invalid information element contents (100), class = Protocol Error (6) ] -- Processing IE 8 (cs0, Cause) Your zapata.conf does not match your telco's provisioning of the PRI. Contact your switch tech and verify your settings. I happened to notice that your cell number is in the 917 area. Is your PRI provider Verizon? If so, I can send you my config that works for a Verizon PRI. Offhand, I am going to guess that you should *NOT* set caller ID **NAME** -- send only the number. Failing that, don't even set the CID number. Yes, Verizon lets me specify CID number, but not name. - Noah ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Re: can't make my PRI dial out
On Fri, Apr 22, 2005 at 11:10:43AM -0500, [EMAIL PROTECTED] wrote: I have a full PRI installed on my * machine. I can get inbound calls just fine but can't make outbound ones. If you run pri debug span x, you might see this behaviour: PRI debugging with the inbound numbers show that there is a minor difference in the SETUP frame: In the Channel ID, Telstra hasn't set the exclusive bit, AAPT has. Solution for me was in zapata.conf: - spanmap = 1,1,1 + spanmap = 1,1 Edwin -- Edwin Groothuis |Personal website: http://www.mavetju.org [EMAIL PROTECTED]| Weblog: http://weblog.barnet.com.au/edwin/ ___ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users