Re: [Asterisk-Users] wct1xxp module and the T100P
Hello! On Wed, 3 Mar 2004 [EMAIL PROTECTED] wrote: Here's a question, though: does the wct1xxp module read from either zaptel.conf or zapata.conf when loaded? AFAIK it does not. These settings are really exerting their action by auxiliary utilities like ztcfg after successful driver loading, see /etc/modules.conf: === post-install tor2 /sbin/ztcfg post-install wcfxo /sbin/ztcfg post-install wct1xxp /sbin/ztcfg post-install wct4xxp /sbin/ztcfg post-install wcfxs /sbin/ztcfg post-install wcfxsusb /sbin/ztcfg post-install torisa /sbin/ztcfg === -- WBR, Yury Bokhoncovich, Senior System Administrator, NOC of F1 Group. Phone: +7 (3832) 106228, ext.140, E-mail: [EMAIL PROTECTED] Unix is like a wigwam -- no Gates, no Windows, and an Apache inside. ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] wct1xxp module and the T100P
I'm having trouble turning up a PRI to a T100P. I've read on the Digium FAQ's that once the wct1xxp module is loaded correctly, the LED on the T100P will flash red. I believe I've loaded the module correctly because both wct1xxp and zaptel are listed when I do the lsmod command. The LED on the card does not flash on and off. Does anyone have any recommendations on what I could be doing wrong? Thanks in advance! chris
Re: [Asterisk-Users] wct1xxp module and the T100P
On Wed, 2004-03-03 at 17:01, [EMAIL PROTECTED] wrote: I'm having trouble turning up a PRI to a T100P. I've read on the Digium FAQ's that once the wct1xxp module is loaded correctly, the LED on the T100P will flash red. I believe I've loaded the module correctly because both wct1xxp and zaptel are listed when I do the lsmod command. The LED on the card does not flash on and off. Does anyone have any recommendations on what I could be doing wrong? Could be wrong or bad cable, could be incorrect configuration, could be no service on the line yet. Must provide data to get information. -- Steven Critchfield [EMAIL PROTECTED] ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] wct1xxp module and the T100P
On Wed, 3 Mar 2004 [EMAIL PROTECTED] wrote: I'm having trouble turning up a PRI to a T100P. I've read on the Digium FAQ's that once the wct1xxp module is loaded correctly, the LED on the T100P will flash red. I believe I've loaded the module correctly because both wct1xxp and zaptel are listed when I do the lsmod command. The LED on the card does not flash on and off. Does anyone have any recommendations on what I could be doing wrong? Switch type, line code, framing all matter. How about posting your config? -- Andrew McRory - President/CTO Linux Systems Engineers, Inc. PO BOX 3791 Tallahassee, FL 32315 (850)224-5737 (850)294-7567 ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] wct1xxp module and the T100P
Steven Critchfield [EMAIL PROTECTED] Sent by: [EMAIL PROTECTED] 03/03/2004 04:06 PM Please respond to asterisk-users To:[EMAIL PROTECTED] cc: Subject:Re: [Asterisk-Users] wct1xxp module and the T100P On Wed, 2004-03-03 at 17:01, [EMAIL PROTECTED] wrote: I'm having trouble turning up a PRI to a T100P. I've read on the Digium FAQ's that once the wct1xxp module is loaded correctly, the LED on the T100P will flash red. I believe I've loaded the module correctly because both wct1xxp and zaptel are listed when I do the lsmod command. The LED on the card does not flash on and off. Does anyone have any recommendations on what I could be doing wrong? Could be wrong or bad cable, could be incorrect configuration, could be no service on the line yet. Must provide data to get information. -- Steven Critchfield [EMAIL PROTECTED] __ I know the PRI is good to the RJ-45 right before it goes into the T100P; I've made calls on it with our T-Berd. So I'm sure the cable is ok and there is service on the line. I haven't run Asterisk yet; shouldn't the card look alive once its driver module is loaded? Thanks! chris
Re: [Asterisk-Users] wct1xxp module and the T100P
Andrew McRory [EMAIL PROTECTED] Sent by: [EMAIL PROTECTED] 03/03/2004 04:11 PM Please respond to asterisk-users To:[EMAIL PROTECTED] cc: Subject:Re: [Asterisk-Users] wct1xxp module and the T100P On Wed, 3 Mar 2004 [EMAIL PROTECTED] wrote: I'm having trouble turning up a PRI to a T100P. I've read on the Digium FAQ's that once the wct1xxp module is loaded correctly, the LED on the T100P will flash red. I believe I've loaded the module correctly because both wct1xxp and zaptel are listed when I do the lsmod command. The LED on the card does not flash on and off. Does anyone have any recommendations on what I could be doing wrong? Switch type, line code, framing all matter. How about posting your config? -- Andrew McRory - President/CTO Linux Systems Engineers, Inc. PO BOX 3791 Tallahassee, FL 32315 (850)224-5737 (850)294-7567 ___ Sure: zaptel.conf: span=1,1,0,esf,b8zs bchan=1-23 dchan=24 loadzone = us defaultzone=us zapata.conf: [channels] context=cyperpri switchtype=national pridialplan=unknown signalling=pri_cpe channel=1-23 Here's a question, though: does the wct1xxp module read from either zaptel.conf or zapata.conf when loaded? Thanks! chris
Re: [Asterisk-Users] wct1xxp module and the T100P
Man your email client is borked! zaptel looks good. try removing pridialplan=unknown and add group=1. -- Andrew McRory - President/CTO Linux Systems Engineers, Inc. PO BOX 3791 Tallahassee, FL 32315 (850)224-5737 (850)294-7567 ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] wct1xxp module and the T100P
On Wed, 2004-03-03 at 17:01, [EMAIL PROTECTED] wrote: I'm having trouble turning up a PRI to a T100P. I've read on the Digium FAQ's that once the wct1xxp module is loaded correctly, the LED on the T100P will flash red. I believe I've loaded the module correctly because both wct1xxp and zaptel are listed when I do the lsmod command. The LED on the card does not flash on and off. Does anyone have any recommendations on what I could be doing wrong? Thanks! chris Could be wrong or bad cable, could be incorrect configuration, could be no service on the line yet. Must provide data to get information. -- Steven Critchfield [EMAIL PROTECTED] __ I know the PRI is good to the RJ-45 right before it goes into the T100P; I've made calls on it with our T-Berd. So I'm sure the cable is ok and there is service on the line. I haven't run Asterisk yet; shouldn't the card look alive once its driver module is loaded? Thanks! Chris Nope, What would answer the request placed on the line. BTW, please see about putting some sane configuration options in your mailer. I know Lotus is notoriously crappy when viewed by other readers, but that was really bad. -- Steven Critchfield [EMAIL PROTECTED] __ Steven, Perhaps I should have posted my question differently to the list: After installing the CVS version of Asterisk, I type, modprobe xct1xxp. The machine accepts the command but the LED on the T100P does not flash. How do I know that the T100P module has loaded correctly? (What sort of mailer config options do you recommend?) Thanks! chris
Re: [Asterisk-Users] wct1xxp module and the T100P
Steven, Perhaps I should have posted my question differently to the list: After installing the CVS version of Asterisk, I type, modprobe xct1xxp. The machine accepts the command but the LED on the T100P does not flash. How do I know that the T100P module has loaded correctly? Do you see any errors showing up in the output from dmesg? ___ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] wct1xxp module and the T100P
Use default configuration as below should work if you have PRIline. zaptel.conf: span=1,1,0,esf,b8zs bchan=1-23 dchan=24 loadzone = us defaultzone=us zapata.conf: [channels] context=default switchtype=national signalling=pri_cpe channel=1-23 group = 1 If it's not green, make sure you put in right framing, coding, signalling, switchtype. Call your telco and ask them if you do not know for sure. It could be EM Wink (channel bank line) which uses different settings. Hope this help. Tools: /sbin/ztcfg or /sbin/zttool -Tri. - Original Message - From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, March 03, 2004 3:28 PM Subject: Re: [Asterisk-Users] wct1xxp module and the T100P Andrew McRory [EMAIL PROTECTED] Sent by: [EMAIL PROTECTED] 03/03/2004 04:11 PM Please respond to asterisk-users To: [EMAIL PROTECTED] cc: Subject:Re: [Asterisk-Users] wct1xxp module and the T100POn Wed, 3 Mar 2004 [EMAIL PROTECTED] wrote: I'm having trouble turning up a PRI to a T100P. I've read on the Digium FAQ's that once the wct1xxp module is loaded correctly, the LED on the T100P will flash red. I believe I've loaded the module correctly because both wct1xxp and zaptel are listed when I do the "lsmod" command. The LED on the card does not flash on and off. Does anyone have any recommendations on what I could be doing wrong?Switch type, line code, framing all matter. How about posting your config?-- Andrew McRory - President/CTOLinux Systems Engineers, Inc.PO BOX 3791Tallahassee, FL 32315(850)224-5737(850)294-7567___ Sure: zaptel.conf: span=1,1,0,esf,b8zs bchan=1-23 dchan=24 loadzone = us defaultzone=us zapata.conf: [channels] context=cyperpri switchtype=national pridialplan=unknown signalling=pri_cpe channel=1-23 Here's a question, though: does the wct1xxp module read from either zaptel.conf or zapata.conf when loaded? Thanks! chris
