[Bacula-users] OT: LOPSA-NJ Professional IT Community Conference 2010 May 7-8 New Brunswick NJ.
Please pardon the Interruption. There isn't a way to post this for just folks in the US. LOPSA-NJ Professional IT Community Conference 2010 PICC10 is a gathering of professionals from the diverse IT (computer and network administration) community in New Jersey to learn, share ideas, and network. The conference includes invited speakers and keynotes, training by top-notch experts that is relevant, useful, and recession-friendly; plus an unconference track where attendees propose and host their own topics during the event. We expect attendance of 100 to 150 IT professionals from mid- to large-sized companies and academia from New Jersey/New York/Pennsylvania. We go by many titles but everyone is invited: system administrators, network administrators, network engineers, Windows, Linux, Unix, DBAs, etc. Flyer for the event http://www.lopsanj.org/events/picc10/files/flyer.pdf Link for the event http://lopsanj.org/events/picc10/ John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! -- Download Intel#174; Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Can't find the tape changer
I have a PowerVault 124T. Under RHEL 5. Attached devices: Host: scsi0 Channel: 00 Id: 06 Lun: 00 Vendor: SUPERModel: GEM318 Rev: 0 Type: ProcessorANSI SCSI revision: 02 Host: scsi0 Channel: 01 Id: 06 Lun: 00 Vendor: SUPERModel: GEM318 Rev: 0 Type: ProcessorANSI SCSI revision: 02 Host: scsi0 Channel: 02 Id: 00 Lun: 00 Vendor: MegaRAID Model: LD0 RAID5 30505R Rev: 1L19 Type: Direct-AccessANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 02 Lun: 00 Vendor: SEAGATE Model: DAT9SP40-000 Rev: 911D Type: Sequential-AccessANSI SCSI revision: 03 Host: scsi2 Channel: 00 Id: 06 Lun: 00 Vendor: CERTANCE Model: ULTRIUM 2Rev: 1826 Type: Sequential-AccessANSI SCSI revision: 03 Host: scsi2 Channel: 00 Id: 06 Lun: 01 Vendor: DELL Model: PV-124T Rev: 0031 Type: Medium Changer ANSI SCSI revision: 02 The changer is at: /dev/sg5 The tape drive on this changer is at: Data Node /dev/st1 No Rewind Node /dev/nst1 The tape drive and changer did work under Bacula when the system was running Fedora Core 3. Since I had to upgrade to RHEL 5 I have had issues getting Bacula running but that has been just me being dumb. Hope this helps. John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! ganiuszka ganius...@gmail.com 1/19/2010 11:25 AM Here is a instruction about Dell PowerVault 124T and LUNs under Linux. http://support.dell.com/support/edocs/stor-sys/124t/en/124tvs16/install.html#enabling_lun_linux Subject Enabling LUN Support in Linux Maybe this is the solution. Regards. Marcin -- View this message in context: http://old.nabble.com/Can%27t-find-the-tape-changer-tp27216402p27228465.html Sent from the Bacula - Users mailing list archive at Nabble.com. -- Throughout its 18-year history, RSA Conference consistently attracts the world's best and brightest in the field, creating opportunities for Conference attendees to learn about information security's most important issues through interactions with peers, luminaries and emerging and established companies. http://p.sf.net/sfu/rsaconf-dev2dev ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users -- Throughout its 18-year history, RSA Conference consistently attracts the world's best and brightest in the field, creating opportunities for Conference attendees to learn about information security's most important issues through interactions with peers, luminaries and emerging and established companies. http://p.sf.net/sfu/rsaconf-dev2dev ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Problems getting Bacula to backup Windows Client
I am trying to get bacula configured to backup my windows client. I am not sure where to start with this question. I have bacula installed on my RHEL5. My Windows client is installed on Windows XP. Is there a link to a sample Director Configuration file that shows how to configure the Client protion of Director for a Windows System? I got this error when I tried what I have: 23-Nov 10:40 jerome-dir JobId 49: No prior Full backup Job record found. 23-Nov 10:40 jerome-dir JobId 49: No prior or suitable Full backup found in catalog. Doing FULL backup. 23-Nov 10:40 jerome-dir JobId 49: Start Backup JobId 49, Job=JBClient2.2009-11-23_10.40.55_03 # 23-Nov 10:45 jerome-dir JobId 49: Using Device JBFileStorage 23-Nov 10:45 jen-a-sys2-fd JobId 49: Fatal error: Failed to connect to Storage daemon: jerome:9103 23-Nov 10:45 jerome-dir JobId 49: Fatal error: Bad response to Storage command: wanted 2000 OK storage , got 2902 Bad storage 23-Nov 10:45 jerome-dir JobId 49: Error: Bacula jerome-dir 3.0.2 (18Jul09): 23-Nov-2009 10:45:43 Build OS: i686-redhat-linux-gnu redhat JobId: 49 Job:JBClient2.2009-11-23_10.40.55_03 Backup Level: Full (upgraded from Incremental) Client: jen-a-sys2-fd 3.0.2 (18Jul09) Linux,Cross-compile,Win32 FileSet:Windows Full Set 2009-11-23 10:30:11 Pool: Default (From Job resource) Catalog:MyCatalog (From Client resource) Storage:JBFile (From Job resource) Scheduled time: 23-Nov-2009 10:40:53 Start time: 23-Nov-2009 10:40:57 End time: 23-Nov-2009 10:45:43 Elapsed time: 4 mins 46 secs Priority: 10 FD Files Written: 0 SD Files Written: 0 FD Bytes Written: 0 (0 B) SD Bytes Written: 0 (0 B) Rate: 0.0 KB/s Software Compression: None VSS:no Encryption: no Accurate: no Volume name(s): Volume Session Id: 1 Volume Session Time:1258990838 Last Volume Bytes: 0 (0 B) Non-fatal FD errors:0 SD Errors: 0 FD termination status: Error SD termination status: Waiting on FD Termination:*** Backup Error *** I can run the Windows console on the Windows machine and connect to my Bacula Director on the LINUX box. I have the passwords synched I think. So I am looking for some examples that will help me. TIA John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! -- Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Problems getting Bacula to backup Windows Client
What kind of firewall you have in the windows client? No firewall Can you ping jerome from the command prompt of that machine? Yes. I can run the bwx-console and connect o the director on Jerome from the Windows Client. Can you telnet jerome 9103 from the command prompt of that machine? If the telnet just hangs there it might have a connection, but if it says connection refused there is a problem. Yes I can telnet to port 9103 on Jerome Do you have own DNS in your LAN? Or are the hosts names in some hosts files? The hosts machines are in host tables but not in DNS as this is a private network behind a firewall. The units are all on the same network and switch. -- http://www.iki.fi/jarif/ You will get what you deserve. John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! -- Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Confusion in setting up Bacula to Windows Clients
I had to rebuild my Bacula setup here and lost all of my setups. Currently I am trying to get the Windows client to talk to my Bacula on my RHEL 5 setup. Looking at the manual I can't wrap my head around the configuration. In my director I have this setup: Client { Name = John Address = 172.31.6.95 FDPort = 9102 Catalog = MyCatalog Password = XX2 # password for FileDaemon 2 File Retention = 30 days# 30 days Job Retention = 6 months# six months AutoPrune = yes # Prune expired Jobs/Files } on the Windows machine I have # List Directors who are permitted to contact this File daemon # Director { Name = jerome-dir Password = @client_password@ } # # Restricted Director, used by tray-monitor to get the # status of the file daemon # Director { Name = jen-a-sys2-mon Password = Y Monitor = yes When I try to find the status using bconsole it keeps telling me that it can't connect to the client here is the error message: Connecting to Client John at 172.31.6.95:9102 Failed to connect to Client John. 08-Oct 12:24 jerome-dir JobId 0: Fatal error: Unable to authenticate with File daemon at 172.31.6.95:9102. Possible causes: Passwords or names not the same or Maximum Concurrent Jobs exceeded on the FD or FD networking messed up (restart daemon). Please see http://www.bacula.org/en/rel-manual/Bacula_Freque_Asked_Questi.html#SECTION00376 for help. Any help or pointer to an explanation would be appreciated. John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! -- Come build with us! The BlackBerry(R) Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9 - 12, 2009. Register now! http://p.sf.net/sfu/devconference ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Confusion in setting up Bacula to Windows Clients
Yes. That was my first step. I opened 9102 and 9103 and 9101 John Drescher dresche...@gmail.com 10/8/2009 12:51 PM On Thu, Oct 8, 2009 at 12:26 PM, John BORIS jbo...@adphila.org wrote: I had to rebuild my Bacula setup here and lost all of my setups. Currently I am trying to get the Windows client to talk to my Bacula on my RHEL 5 setup. Looking at the manual I can't wrap my head around the configuration. In my director I have this setup: Client { Name = John Address = 172.31.6.95 FDPort = 9102 Catalog = MyCatalog Password = XX2 # password for FileDaemon 2 File Retention = 30 days# 30 days Job Retention = 6 months# six months AutoPrune = yes # Prune expired Jobs/Files } on the Windows machine I have # List Directors who are permitted to contact this File daemon # Director { Name = jerome-dir Password = @client_password@ } # # Restricted Director, used by tray-monitor to get the # status of the file daemon # Director { Name = jen-a-sys2-mon Password = Y Monitor = yes When I try to find the status using bconsole it keeps telling me that it can't connect to the client here is the error message: Connecting to Client John at 172.31.6.95:9102 Failed to connect to Client John. 08-Oct 12:24 jerome-dir JobId 0: Fatal error: Unable to authenticate with File daemon at 172.31.6.95:9102. Possible causes: Passwords or names not the same or Maximum Concurrent Jobs exceeded on the FD or FD networking messed up (restart daemon). Please see http://www.bacula.org/en/rel-manual/Bacula_Freque_Asked_Questi.html#SECTION00376 for help. Any help or pointer to an explanation would be appreciated. Have you disabled windows firewall or allowed bacula-fd through the firewall. John -- Come build with us! The BlackBerry(R) Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9 - 12, 2009. Register now! http://p.sf.net/sfu/devconference ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Confusion in setting up Bacula to Windows Clients
That is where I think I have things confused. I tried to follow the manual but what about the line @client_password@ That is exactly how it is in the file. The other two are not the exact passwords but are different. should they be the same? John Drescher dresche...@gmail.com 10/8/2009 12:52 PM On Thu, Oct 8, 2009 at 12:26 PM, John BORIS jbo...@adphila.org wrote: I had to rebuild my Bacula setup here and lost all of my setups. Currently I am trying to get the Windows client to talk to my Bacula on my RHEL 5 setup. Looking at the manual I can't wrap my head around the configuration. In my director I have this setup: Client { Name = John Address = 172.31.6.95 FDPort = 9102 Catalog = MyCatalog Password = XX2 # password for FileDaemon 2 File Retention = 30 days# 30 days Job Retention = 6 months# six months AutoPrune = yes # Prune expired Jobs/Files } on the Windows machine I have # List Directors who are permitted to contact this File daemon # Director { Name = jerome-dir Password = @client_password@ } I hope you set the correct password in the line above. John -- Come build with us! The BlackBerry(R) Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9 - 12, 2009. Register now! http://p.sf.net/sfu/devconference ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Confusion in setting up Bacula to Windows Clients
John, Thanks for the quick response. Also should the names match. In my director I have the Client named John but that machine has a different name. I figure the Ciient name on the server (bacula-dir.conf) is a place holder and it uses the IP address to handle the connection and sends the password. John Drescher dresche...@gmail.com 10/8/2009 1:15 PM On Thu, Oct 8, 2009 at 1:01 PM, John BORIS jbo...@adphila.org wrote: That is where I think I have things confused. I tried to follow the manual but what about the line @client_password@ That is exactly how it is in the file. You need to fill that in. The other two are not the exact passwords but are different. should they be the same? I believe this password should match the Client password in bacula-dir.conf. The reason I say believe is because I have not implemented rigorous security and I have all bacula passwords being the same. John -- Come build with us! The BlackBerry(R) Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9 - 12, 2009. Register now! http://p.sf.net/sfu/devconference ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users -- Come build with us! The BlackBerry(R) Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9 - 12, 2009. Register now! http://p.sf.net/sfu/devconference ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Trouble installing on RHEL 5
I just installed bacula on my RHEL 5 server using rpm bacula-mysql-3.0.2-1.el5.i386.rpm I have a few questions: 1. Where did it install it? Can't find it anywhere but it says its installed 2. The database portion failed as it never prompted me for the database password. Is there a How-To on manually creating the database? Thanks in advance for now. John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! -- Come build with us! The BlackBerryreg; Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9#45;12, 2009. Register now#33; http://p.sf.net/sfu/devconf ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Trouble installing on RHEL 5
Thanks to Ryan and Jari for the quick response. I found what I needed. The issue is the bacula rpm and scripts assume that the mysql installation doesn't require a password. I modified the scripts to prompt for the password and things proceeded just fine. I previously had an installation of bacula on this server but it was under Fedora Core. I since had moved it to RHEL because of a major failure in hardware. Now I just have to recreate things. Thanks again. John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! Ryan Novosielski novos...@umdnj.edu 9/25/2009 10:21 AM -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 John BORIS wrote: I just installed bacula on my RHEL 5 server using rpm bacula-mysql-3.0.2-1.el5.i386.rpm I have a few questions: 1. Where did it install it? Can't find it anywhere but it says its installed rpm -ql rpmname shows you, if I'm not mistaken. If it's not that, it's very similar. man rpm. - -- _ _ _ _ ___ _ _ _ |Y#| | | |\/| | \ |\ | | |Ryan Novosielski - Systems Programmer II |$| |__| | | |__/ | \| _| |novos...@umdnj.edu - 973/972.0922 (2-0922) \__/ Univ. of Med. and Dent.|IST/CST - NJMS Medical Science Bldg - C630 -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkq80fMACgkQmb+gadEcsb4I/wCfTpGuyjO3KNe6banrUeMAjX1C Xp8AoMIusKmQrBlILUsi2QSr3MQKzmiz =jrJ1 -END PGP SIGNATURE- -- Come build with us! The BlackBerryreg; Developer Conference in SF, CA is the only developer event you need to attend this year. Jumpstart your developing skills, take BlackBerry mobile applications to market and stay ahead of the curve. Join us from November 9#45;12, 2009. Register now#33; http://p.sf.net/sfu/devconf ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Connecting Windows Client to LINUX Director
I have been following the thread Windows client unable to connect and it almost answered all of my questions. I have some Windows Desktops I want Bacula to backup to a directory on my Backup Server. Do I put the job information in the Director's configuration on my backup server as well as the client information. Then in the Client configuration on the windows machines I just have which director can connect to it? I haven't found this in the documentation , or maybe I am just too dense to find it. TIA John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Connecting Windows Client to LINUX Director
Thanks for the help. I got this working. I was unsure at first about / or \ so after a few false starts and getting the correct password in the Windows Client I got this going. Thanks again. John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! Jérôme Massano [EMAIL PROTECTED] 03/29/07 8:59 AM Oops, I answered to Boris and not to the mailing list. Maybe it can help making things clear for another person. Le jeudi 29 mars 2007 à 14:57 +0200, Jérôme Massano a écrit : Hello Le jeudi 29 mars 2007 à 08:50 -0400, John BORIS a écrit : I have been following the thread Windows client unable to connect and it almost answered all of my questions. I have some Windows Desktops I want Bacula to backup to a directory on my Backup Server. Do I put the job information in the Director's configuration on my backup server as well as the client information. Then in the Client configuration on the windows machines I just have which director can connect to it? Exactly. All you have to put in your client (file daemon) configuration is the Director (Name password), and the informations about the file daemon itself (name, port, working directory, pid directory, max concurrent jobs, etc...). When you install windows client, nearly everything will be configured, you have very little things to change. I haven't found this in the documentation , or maybe I am just too dense to find it. TIA John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Question on mailcommand
I am having a bit of a problem getting the mailcommand setup properly. Here is what I have now: mailcommand = /root/bacula/bin/bsmtp -h jc.mydomain.org -f \\(Bacula\) [EMAIL PROTECTED] -s \Bacula: %t %e of %c %l\ %r operatorcommand = /root/bacula/bin/bsmtp -h jc.mydomain.org -f \\(Bacula\) [EMAIL PROTECTED] -s \Bacula: Intervention needed for %j\ %r When the mail shows up at my mail server jc.mydomain.org it is malformed and is in this form: @jerome:[EMAIL PROTECTED] This format is screwing up my email server. Should that say [EMAIL PROTECTED]:[EMAIL PROTECTED] I am hesitant to start modifying the line because I am not sure which is required and which isn't. Any help on this would be greatly appreciated. John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Question about setting up bsmtp
I am using Bacula 2.0.2 on Fedora Core 6 and I am bit confused about the mailcommand line. mailcommand = /home/bacula/bin/bsmtp -h mail.domain.com -f \\(Bacula\) %r\ -s \Bacula: %t %e of %c %l\ %r the -h option (per the instructions) is for your bsmtp mail server. I replaced the mail.domain.com with the Fully qualified name of my bacula server. That gets rejected. If I leave this out it sends to localhost and that gets rejected. Mail will leave my server just by doing mail -s Test [EMAIL PROTECTED] Reading the Manual it said provided you want to use bsmtp. Does that mean I can just replace this with the regular mail command. The Fedora Install is out of the box and I used the default mail settings. Can anyone shed some light onto this setting. Thanks John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Sony LTO-2/LTO-3
Although I am going through a reinstall on an upgraded server I can attest that it works with my Dell-124T which has a Certance LTO-2 tape drive in it. It worked okay under 1.36 and so far it has tested okay on 2.0.2 John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! Fausto Barros de Sá Teles [EMAIL PROTECTED] 03/01/07 3:15 PM Has anyone there ever used Bacula for backin up to Sony LTO-2/LTO-3 tapes? I have to implement Bacula but I'm not sure if it works with this kind of tape. Does anybody know? Thanks. FAUSTO BARROS DE SÁ TELES __ Fale com seus amigos de graça com o novo Yahoo! Messenger http://br.messenger.yahoo.com/ - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] problem with configure on FC 6
I am trying to install Bacula 2.0.2 from the source distribution. When I run this: ./configure --sbindir=$HOME/bacula/bin / --sysconfdir=$HOME/bacula/bin / --with-pid-dir=$HOME/bacula/bin / --with-subsys-dir=$HOME/bacula/bin / --enable-gnome / --with-mysql=/usr/include/mysql / --with-working-dir=$HOME/bacula/bin/working / --with-dump-email=myemail.mydomain.com / [EMAIL PROTECTED] / --with-smtp-host=localhost I get this error at the end: configure: error: Invalid MySQL directory /usr/include/mysql - unable to find mysql.h under /usr/include/mysql So I did a find / -name mysql.h and got this back: /usr/include/mysql/mysql.h Is this a bug? or a feature? ;-) I am doing the install as root. John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] problem with configure on FC 6
Thanks. About 5 minutes ago I found a message to that. They should change the README and INSTALL files. I installed Bacula a while back but I lost the installation when I had to rebuild the RAID array for more space. So I sort of lost the original config. Thanks again. John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! Martin Simmons [EMAIL PROTECTED] 02/23/07 3:47 PM On Fri, 23 Feb 2007 11:42:57 -0500, John BORIS said: I am trying to install Bacula 2.0.2 from the source distribution. When I run this: ./configure --sbindir=$HOME/bacula/bin / --sysconfdir=$HOME/bacula/bin / --with-pid-dir=$HOME/bacula/bin / --with-subsys-dir=$HOME/bacula/bin / --enable-gnome / --with-mysql=/usr/include/mysql / --with-working-dir=$HOME/bacula/bin/working / --with-dump-email=myemail.mydomain.com / [EMAIL PROTECTED] / --with-smtp-host=localhost I get this error at the end: configure: error: Invalid MySQL directory /usr/include/mysql - unable to find mysql.h under /usr/include/mysql So I did a find / -name mysql.h and got this back: /usr/include/mysql/mysql.h Is this a bug? or a feature? ;-) Try --with-mysql i.e. without the =dir, which is optional. __Martin - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys-and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Autoloaders
My Powervault works with these settings : # # An autochanger device with two drives # Autochanger { Name = Autochanger Device = Drive-0 # Device = Drive-2 Changer Command = /root/bacula/bin/mtx-changer %c %o %S %a %d Changer Device = /dev/sg2 } Device { Name = Drive-0 # Drive Index = 0 Media Type = LTO-2 Archive Device = /dev/nst1 AutomaticMount = yes; # when device opened, read it AlwaysOpen = yes; RemovableMedia = yes; RandomAccess = no; AutoChanger = yes # # Enable the Alert command only if you have the mtx package loaded Alert Command = sh -c 'tapeinfo -f %c |grep TapeAlert|cat' } The autochanger is at /dev/sg2 I had some difficulty using the /dev/sg* when I first started. I have other issues but the Powervault is recognized. I am running RedHat Fedora Core 3 John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! Jaime Ventura [EMAIL PROTECTED] 09/12/06 10:57 AM weird...:P do you have graphic interface? run the harware browser (hwbroswer on the command line) take a look on a screenshot I send as attachment. You should see you tape loader under the system devices. As you ca seen in the picture mine is on /dev/sg5. If doesn't work or if you don't have access to the harware browser let me see what you have on /proc/scsi (ls /proc/scsi ) - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Bacula and DELL PV124T
Djoni, I have one and here is the settings on my box. I also have an internal tape drive that came configured with the system. I am running RH FC3 bacula-sd.conf Autochanger { Name = Autochanger Device = Drive-0 # Device = Drive-2 Changer Command = /root/bacula/bin/mtx-changer %c %o %S %a %d Changer Device = /dev/sg2 } Device { Name = Drive-0 # Drive Index = 0 Media Type = LTO-2 Archive Device = /dev/nst1 AutomaticMount = yes; # when device opened, read it AlwaysOpen = yes; RemovableMedia = yes; RandomAccess = no; AutoChanger = yes # # Enable the Alert command only if you have the mtx package loaded Alert Command = sh -c 'tapeinfo -f %c |grep TapeAlert|cat' } John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! Djoni Windberg [EMAIL PROTECTED] 07/03/06 9:03 AM Somebody have this equipment working with bacula ? I don´t know the configuration on bacula-sd. I will appreciate any help. Thanks Djoni Bacula 1.38.11 - Red Hat Enterprise 4 Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] How can you get bacula to relabel a tape
I am trying to get bacula to relabel the tapes I have in my autochanger. They were already labeled through the label barcode command in vconsole but the labels aren't being recognized. When bacula tries to use the tape it says it can't find an appendable volume. Any ideas on this one. I issued the label barcode command thinking it would relabel the tape but I was wrong. John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] How do I get Bacula to stop asking for Volume_0001 when that Volume was deleted from the Database?
Okay, I've asked this question a few times and I am still trying to get bacula back to a working state. I had a working configuration on Fedora Core 4, Athlon 64 bit, attached to a Dell 124T Tape library. I use Bacula to do a Master Backup once a month and incrementals the rest. This server handles disk backups from other servers and then bacula backs it up to tape. It was working fine backing up and changing tapes as they became full or somewhat full until the File System filled up. Sorry poor planning. So I cleaned up my mess and then after doing some RTFM'n about reusing tapes I did a Prune and purge and then deleted the Volumes in the database. My Intent was to start over and to force bacula to do a Full backup on the first tape. Now I get this error message. All I want to do is start over without reinstalling bacula. Can anyone point to some help on this? Thanks Error message follows. 20-Jun 03:05 jerome-dir: Client2.2006-06-10_13.05.00 Error: Bacula 1.38.5 (18Jan06): 20-Jun-2006 03:05:10 JobId: 127 Job:Client2.2006-06-10_13.05.00 Backup Level: Full (upgraded from Differential) Client: jerome-fd i686-pc-linux-gnu,redhat,(Heidelberg) FileSet:Full Set 2006-04-17 14:08:52 Pool: Default Storage:Drive-0 Scheduled time: 10-Jun-2006 13:05:00 Start time: 14-Jun-2006 20:05:08 End time: 20-Jun-2006 03:05:10 Priority: 10 FD Files Written: 0 SD Files Written: 0 FD Bytes Written: 0 SD Bytes Written: 0 Rate: 0.0 KB/s Software Compression: None Volume name(s): Volume Session Id: 2 Volume Session Time:1149866416 Last Volume Bytes: 0 Non-fatal FD errors:0 SD Errors: 0 FD termination status: Error SD termination status: Error Termination:*** Backup Error *** 20-Jun 03:05 jerome-dir: sql_find.c:126 No Job record found: ERR= CMD=SELECT StartTime FROM Job WHERE JobStatus='T' AND Type='B' AND Level='F' AND Name='Client2' AND ClientId=1 AND FileSetId=3 ORDER BY StartTime DESC LIMIT 1 20-Jun 03:05 jerome-dir: No prior or suitable Full backup found. Doing FULL backup. 20-Jun 03:05 jerome-dir: Start Backup JobId 129, Job=Client2.2006-06-11_13.05.00 20-Jun 03:05 jerome-sd: Client2.2006-06-11_13.05.00 Warning: Director wanted Volume Volume_0001. Current Volume 000101L2 not acceptable because: 1997 Volume 000101L2 not in catalog. 20-Jun 03:05 jerome-sd: Please mount Volume Volume_0001 on Storage Device Drive-0 (/dev/nst1) for Job Client2.2006-06-11_13.05.00 20-Jun 04:05 jerome-sd: Please mount Volume Volume_0001 on Storage Device Drive-0 (/dev/nst1) for Job Client2.2006-06-11_13.05.00 20-Jun 06:05 jerome-sd: Please mount Volume Volume_0001 on Storage Device Drive-0 (/dev/nst1) for Job Client2.2006-06-11_13.05.00 20-Jun 10:05 jerome-sd: Please mount Volume Volume_0001 on Storage Device Drive-0 (/dev/nst1) for Job Client2.2006-06-11_13.05.00 20-Jun 18:05 jerome-sd: Please mount Volume Volume_0001 on Storage Device Drive-0 (/dev/nst1) for Job Client2.2006-06-11_13.05.00 21-Jun 10:05 jerome-sd: Please mount Volume Volume_0001 on Storage Device Drive-0 (/dev/nst1) for Job Client2.2006-06-11_13.05.00 22-Jun 10:05 jerome-sd: Please mount Volume Volume_0001 on Storage Device Drive-0 (/dev/nst1) for Job Client2.2006-06-11_13.05.00 John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Bacula keeps asking for a Volume that was deleted
I am trying to start over with my backup process. I think I screwed up the Volume naming or something. When I set things up I had set the label Format to Volume_. Things ran smoothly but then Bacula started marking tapes as full when they weren't and started loading new tapes. It got to the last tape and then asked for me to load new tapes since the retention time wasn't exceeded for the other tapes in the changer. I looked an I had it set at 365 days when it should have been 30 days. So I did a purge and delete thinking that would clear the Catalog and database so I could continue on. That didn't work since it now is asking for Volume_0001 which doesn't exist since when I did a delete I remember deleting that volume from the Catalog. All of the tapes in the changer have been labeled using the btape command of using the barcodes. Can anyone shed some light on this as to how I can just tell bacula to start from scratch. Should I just do an SQl and clear out the table manually? I have searched the lists and docs and haven't found anything yet. In bconsole I did a status of the Director and I get this: Scheduled Jobs: Level Type Pri Scheduled Name Volume === Differential Backup10 09-Jun-06 13:05Client2 Volume_0001 Full Backup11 09-Jun-06 23:10BackupCatalog Volume_0001 The Volume named Volume_0001 was deleted. TIA John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] How to start from a clean slate.
We have been running bacula for over a month and I now found I had things a bit misconfigured. I want to start over so I purged and deleted the contents of the catalog through the console. So the catalog showed no volumes. When my scheduled job kicked off I get an error that says: 06-Jun 23:10 jerome-dir: Start Backup JobId 120, Job=BackupCatalog.2006-06-06_23.10.00 06-Jun 23:10 jerome-dir: Created new Volume Volume_0001 in catalog. 06-Jun 23:10 jerome-sd: 3301 Issuing autochanger loaded drive 0 command. 06-Jun 23:10 jerome-sd: 3302 Autochanger loaded drive 0, result is Slot 1. 06-Jun 23:10 jerome-sd: BackupCatalog.2006-06-06_23.10.00 Warning: Director wanted Volume Volume_0001. Current Volume 000101L2 not acceptable because: 1997 Volume 000101L2 not in catalog. 06-Jun 23:10 jerome-sd: Please mount Volume Volume_0001 on Storage Device Drive-0 (/dev/nst1) for Job BackupCatalog.2006-06-06_23.10.00 06-Jun 23:17 jerome-dir: BackupCatalog.2006-06-06_23.10.00 Fatal error: Network error with FD during Backup: ERR=No data available 06-Jun 23:17 jerome-dir: BackupCatalog.2006-06-06_23.10.00 Fatal error: No Job status returned from FD. 06-Jun 23:17 jerome-dir: BackupCatalog.2006-06-06_23.10.00 Error: Bacula 1.38.5 (18Jan06): 06-Jun-2006 23:17:22 I also got this error when the catalog tried to write: 06-Jun 23:10 jerome-sd: Please mount Volume Volume_0001 on Storage Device Drive-0 (/dev/nst1) for Job BackupCatalog.2006-06-06_23.10.00 Is this a label issue? Is this covered in the Manual? I just want to start over. TIA John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Tapes marked full when they aren't
On my Dell 124-T we are using ULTRIUM 2 Tapes that should hold 400gb compressed. While troubleshooting a different issue I found that the tapes are being marked as full when there is over 100GB of space left on the tape. Is this normal or is this a configuration issue/bug? This is on bacula 1.38.5 on Fedora Core 3. I did a list media pool=Default and got this: | MediaId | VolumeName | VolStatus | VolBytes| VolFiles | VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten | | 1 | Volume_0001 | Append| 0 |0 | 31,536,000 | 1 |0 | 0 | LTO-2 | -00-00 00:00:00 | | 2 | 000101L2| Full | 308,602,587,688 | 334 | 31,536,000 | 1 |1 | 1 | LTO-2 | 2006-05-05 13:12:46 | | 3 | 000102L2| Full | 293,808,721,114 | 314 | 31,536,000 | 1 |2 | 1 | LTO-2 | 2006-05-18 13:08:31 | | 4 | 000103L2| Full | 295,880,169,952 | 308 | 31,536,000 | 1 |3 | 1 | LTO-2 | 2006-05-26 13:23:21 | | 5 | 000104L2| Full | 288,972,568,943 | 299 | 31,536,000 | 1 |4 | 1 | LTO-2 | 2006-06-02 13:11:52 | | 6 | 000105L2| Full | 1,013,411,445 |3 | 31,536,000 | 1 |5 | 1 | LTO-2 | 2006-06-03 13:05:52 | | 7 | 000106L2| Full | 1,013,427,113 |3 | 31,536,000 | 1 |6 | 1 | LTO-2 | 2006-06-04 13:07:12 | | 8 | 000107L2| Full | 1,021,029,624 |3 | 31,536,000 | 1 |7 | 1 | LTO-2 | 2006-06-05 13:05:52 | | 9 | 000108L2| Append| 21,109,523 |1 | 31,536,000 | 1 |8 | 1 | LTO-2 | 2006-06-05 23:13:32 | In MediaID 6,7,8,9 I believe those rows are low because the server ran out of drive space. That was poor planning on my part since this is a new project and the server came in undersized. I am working to correct that. The first row is when I first started this and is most likely wrong. But I am concerned about 2,3,4,5. Can anyone shed some light or pointers about this. TIA John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Backup to disk then tape
John, We do that here (Backup to disk and then to tape). We have just started using Bacula but we us it to backup to tape. I use Microlite's BackupEDGE to backup my remote Servers to disk on my main backup server. I have a network that is only used by me over night so differentials at night are a piece of cake. We have a long time invested in BackupEDGE on our SCO Servers. Then during the day I use Bacula to backup my Server that holds the nightly backups. This works fine for us. I am not a Bacula Guru but I think it would be just a matter of setting up different jobs at the right interval to do what you want. As for restores here we would first look to the on disk differentials to see if the required file is there. In case of a disaster here I would have to make a site visit to rebuild things so I would have a tape on site of the Master, then once the system is back online I would just restore the last differential. If I had to go to a previous volume that was no longer on Disk I would locate that volume in the tape library and restore that volume to disk and then restore that to my system. Before we went to this we only kept the last thirty days of data anyway so this provides us a longer recovery trail. I have had users delete something and then ask me 45 days later if I still have the file. But in those cases it was usually just a report format that could be recreated in less time than it takes to restore the file. John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! John Gerritse [EMAIL PROTECTED] 05/01/06 3:11 AM Hi all, I work in a ICT company and we are looking to replace Amanda. I figured Bacula would be te best solution, but we hit a snag. A feature my boss feels is paramount to a back-up package is write the data to disk, then to tape. Bacula does that in a way, but data spooling does only that; spooling. I need it to write to disk, then copy or migrate the data to tape. According to the documentation, that is a feature planned for the future. Unfortunately, I need it now. I've considered simply backing data up to disk volumes, then copy that to tape by other means, but I'm puzzled how a restore would work in that sort of situation. Is there a workaround someone has successfully used in the field, on production servers? Hating to have to reinvent a proverbial wheel, I figured I'd ask the community. I really love Bacula and I would love to use it in stead of giving Amanda a version bump and a fresh install on our shiny new backup server. So in short; I want backups on disk, then copy them to tape (with Bacula, other backup software, commandline script, whatever). We run a schedule much like the one explained in the manual (a daily, weekly, monthly tape usage example). Thanks in advance! John Gerritse Sogeti Nederland B.V. http://www.sogeti.nl ''~`` ( o o ) +--.oooO--(_)--Oooo.--+ | This email was brought to you by LINUX| |.oooO| |( ) Oooo.| +-\ (( )+ \_)) / (_/ We don't make mistakes, just happy little accidents. Disclaimer: This message contains information that may be privileged or confidential and is the property of Sogeti Nederland B.V. or its Group members. It is intended only for the person to whom it is addressed. If you are not the intended recipient, you are not authorized to read, print, retain, copy, disseminate, distribute, or use this message or any part thereof. If you receive this message in error, please notify the sender immediately and delete all copies of this message. --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Problem with an autoloader
Stefan, Speaking as a newbie that was a bit overwhelmed when I first started with Bacula and a bit confused about the configuration file. I am not sure which files you started with but the ones I downloaded (I started just a few months back) had good examples in the default conf files. There is one there for an autochanger with two drives. If you look at that and just change things to match your setup it should work out of the box. I commented out the second drive designation. I am not going to try and explain this in detail since I am still new at this but here is my setup: # # An autochanger device with two drives # Autochanger { Name = Autochanger Device = Drive-0 # Device = Drive-2 Changer Command = /root/bacula/bin/mtx-changer %c %o %S %a %d Changer Device = /dev/sg2 } Device { Name = Drive-0 # Drive Index = 0 Media Type = LTO-2 Archive Device = /dev/nst1 AutomaticMount = yes; # when device opened, read it AlwaysOpen = yes; RemovableMedia = yes; RandomAccess = no; AutoChanger = yes # # Enable the Alert command only if you have the mtx package loaded Alert Command = sh -c 'tapeinfo -f %c |grep TapeAlert|cat' } This is in bacual-sd.conf. The /dev stuff would go in Changer Device and in the Archive Device. The Device= I believe is actually a label bacula uses to find the correct device. I hope that helps. John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! eklektik [EMAIL PROTECTED] 04/28/06 7:51 AM Hi evrybody I just install an autoloader (HP SureStore DAT24x6) on my PC but i don't know how to configue bacula-sd.conf. I had seen the tutorial but nothing run. My current bacula-sd.conf : Device { Name = HPloader Media Type = DDS-4 Changer Device = /dev/st0 Archive Device = /dev/nst0 Changer Command = /etc/bacula/scripts/mtx-changer %c %o %S %a %d AutomaticMount = yes; # when device opened, read it AlwaysOpen = yes; Label media = yes; RemovableMedia = yes; RandomAccess = no; AutoChanger = yes } I had find this configuraion in an example file in the bacula install, but when i want to label my tapes, i can't do. I just have the possibility to label my autoloader (slot 0). Bacula don't ask me which slot i want labelling. I think i have a wrong bacula-sd.conf ... Is somebody run bacula with an HP-autoloader ?? Can somebody help me ? Thanks !!! -- View this message in context: http://www.nabble.com/Problem-with-an-autoloader-t1524028.html#a4138834 Sent from the Bacula - Users forum at Nabble.com. --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Problem with an autoloader
I am not sure since I don't know the entire History. I am using 1.38.5. What is line 63 column 12. That should give you some clue as to what is misconfigured. What I did when I was starting out was to go back and read again the manual. I set aside free time where I wouldn't be disturbed so I could read the docs through. Then run the tests line by line as you go through the tutorial. You have to have an Autochanger section defined that has a device = portion that points to a Device section of the same name. Then in the Device section you have to tell it that there is an autochanger but setting the field AutoChanger = yes. John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! eklektik [EMAIL PROTECTED] 04/28/06 9:07 AM Thanks for your answer. But when i tried to run bacula-sd with this configuration, i had this message. Starting Bacula Storage daemon: 28-Apr 14:57 bacula-sd: ERROR TERMINATION at parse_conf.c:781 Config error: expected resource name, got: Autochanger : line 63, col 12 of file /etc/bacula/bacula-sd.conf Autochanger { Did Autochanger ressource run on all Bacula version ?? (mine is bacula 1.36.3-2) -- View this message in context: http://www.nabble.com/Problem-with-an-autoloader-t1524028.html#a4139905 Sent from the Bacula - Users forum at Nabble.com. --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Problem with an autoloader
You have this wrong. The Device is just one unit the Tape Drive not each slot in the autochanger. So change the line: Device = tape1, tape2, tape3, tape4, tape5, tape6 in the Autochanger to Device = tape1 Then delete all of the Device sections Device { ... } except the first one. Also add the Archive Device = /dev/whatevere your tape drive is Then try it. John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! eklektik [EMAIL PROTECTED] 04/28/06 9:38 AM My bacula-sd.conf file is Autochanger { Name = Autochanger Device = tape1, tape2, tape3, tape4, tape5, tape6 Changer Device = /dev/st0 Changer Command = /etc/bacula/scripts/mtx-changer %c %o %S %a %d } Device { Name = tape1 Media Type = DDS-4 Drive Index = 0 AlwaysOpen = yes; Label media = yes; AutoChanger = yes } Device { Name = tape2 Media Type = DDS-4 Drive Index = 1 AlwaysOpen = yes; Label media = yes; AutoChanger = yes } Device { Name = tape3 Media Type = DDS-4 Drive Index = 2 AlwaysOpen = yes; Label media = yes; AutoChanger = yes } Device { Name = tape4 Media Type = DDS-4 Drive Index = 3 AlwaysOpen = yes; Label media = yes; AutoChanger = yes } Device { Name = tape5 Media Type = DDS-4 Drive Index = 4 AlwaysOpen = yes; Label media = yes; AutoChanger = yes } Device { Name = tape6 Media Type = DDS-4 Drive Index = 5 AlwaysOpen = yes; Label media = yes; AutoChanger = yes } It's an example which is in the bacula's doc -- View this message in context: http://www.nabble.com/Problem-with-an-autoloader-t1524028.html#a4140439 Sent from the Bacula - Users forum at Nabble.com. --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Autochanger suggestions..
Brett, I am using Bacula on Fedora Core 3 with the Dell 124T. It took me a while to get it working but so far it has proven to be a good buy. We got it on an Educational Pricing from Dell but it was near your budget figure. We got it with one magazine and 10 Ultrium-2 Data cartridges. We also purchased the Adaptec 39160 card to go with it. I didn't want any reason for them (Dell) to say it wasn't working because of the card. The entire package came in just under $5k. That is $1k over your budget but if you have the correct controller and the tapes you save there. I am planning on adding the other Magazine next fiscal year. If you go the Dell route make sure you upgrade the firmware on the Drive and the Loader before hassling with Bacula. The one other nice thing on the 124T is that you can upgrade the drive to an LTO-3 if you want to later. Although we are a large school district this is a small operation. The space on this device will allow me a lot of flexibility. You didn't say your OS or the amount of data so this unit may be too large or not large enough. John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! Brett Curtis [EMAIL PROTECTED] 04/24/06 11:31 AM Hi, First post to the list. I have been using bacula for a few months now. Doing basic backups to the files system. I am looking into buying an autochanger. I was wondering if folks have had any luck with the adic faststor 1? Looking at the Supported_Autochanges.html I see the adic faststor 2 but not 1. Or if folks have any recommendations on a changer to buy please let me know. We are a small company looking to spend no more then ~4000.00 USD. TIA Brett --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users --- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Success with PowerVault 124T
I want to thank everyone on the list especially Pierre for helping me with my setup. I was finally able to get things working here. Here is what I had to do. 1. The first hurdle was to understand bacula's configuration and this took some quiet time to RTFM. 2. My setup is: Fedora Core 3 on a Dual Athlon 64bit processor, Adaptec 39160 and Dell PowerVault 124-T with LTO-2 Drive and one magazine. 3. Load the mtx rpm for FC 3 4. Edit rc.local to get sg_mod loaded (added line modprobe sg). Other Fedora admins might know the proper way but it works for me. 5. Ran the btape test program which passed with flying colors but failed the autochanger test. 6. Ran the autochanger test separately and it passed. 7. Ran the fill command and found that this failed when it tried to change tapes. 8. After a 3 hour phone call session with Dell it turns out that the Firmware on the 124T was outdated. I got the correct file from Dell and ran the utility from the command line and updated the Drive's firmware, restarted the 124T and the server, using the Web interface upgraded the Loaders firmware and restarted the 124T and my server. 9. Edited the mtx-changer to use wait_for_device option. 10. Ran bconsole and did label barcodes Everything ran fine until the job that I had scheduled a week ago at the start kicked off and stopped the labeling process. But while I was trying to figure out what happened it had done two backups. So the firmware upgrade seems to be a must for things to work. The firmware version on the autoloader is 31.0 and the Drives firmware is version 1826. Again thanks to everyone on the list for their patience and help. John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! --- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnkkid=110944bid=241720dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Newbie Configuration Question
I am new to bacula and I am trying to configure my setup. I am running Fedora Core 3 and using a Dell 124T. From what I can see the Dell 124T has passed all of the tests. So now I am trying to edit the configuration files. In the bacula-sd.conf I have this defined: Autochanger { Name = Autochanger Device = Drive-0 # Device = Drive-2 Changer Command = /root/bacula/bin/mtx-changer %c %o %S %a %d Changer Device = /dev/sg2 } Device { Name = Drive-0 # Drive Index = 0 Media Type = LTO-2 Archive Device = /dev/nst1 AutomaticMount = yes; # when device opened, read it AlwaysOpen = yes; RemovableMedia = yes; RandomAccess = no; AutoChanger = yes # # Enable the Alert command only if you have the mtx package loaded Alert Command = sh -c 'tapeinfo -f %c |grep TapeAlert|cat' } In the bacula-dir.conf I have this defined: JobDefs { Name = MainJob Type = Backup Level = Incremental Client = jerome-fd FileSet = Full Set Schedule = WeeklyCycle Storage = Drive-0 Messages = Standard Pool = Default Priority = 10 } Job { Name = Client2 Client = jerome-fd JobDefs = MainJob Write Bootstrap = /root/bacula/bin/working/Client2.bsr } Job { Name = BackupCatalog JobDefs = MainJob Level = Full FileSet=Catalog Schedule = WeeklyCycleAfterBackup # This creates an ASCII copy of the catalog RunBeforeJob = /root/bacula/bin/make_catalog_backup bacula bacula # This deletes the copy of the catalog RunAfterJob = /root/bacula/bin/delete_catalog_backup Write Bootstrap = /root/bacula/bin/working/BackupCatalog.bsr Priority = 11 # run after main backup } # List of files to be backed up FileSet { Name = Full Set Include { Options { signature = MD5 } File = / } Exclude { File = /proc File = /tmp File = /.journal File = /.fsck } } Client { Name = jerome-fd Address = jerome FDPort = 9102 Catalog = MyCatalog Password = f0/iy0aB0V0gK9YxE2M3BPzEp1IkW9sbcysZ69mSSC1f # password for FileDaemon File Retention = 30 days# 30 days Job Retention = 6 months# six months AutoPrune = yes # Prune expired Jobs/Files } And in jerome-fd.conf I have this defined: FileDaemon { # this is me Name = jerome-fd FDport = 9102 # where we listen for the director WorkingDirectory = /root/bacula/bin/working Pid Directory = /root/bacula/bin/working Maximum Concurrent Jobs = 20 } When I try and start bacula I get this error: ./bacula start Starting the Bacula Storage daemon Starting the Bacula File daemon Starting the Bacula Director daemon 17-Apr 12:06 bacula-dir: ERROR TERMINATION at parse_conf.c:508 Config error: Could not find config Resource storage referenced on line 32 : Storage = Drive-0 : line 32, col 19 of file /root/bacula/bin/bacula-dir.conf Storage = Drive-0 Looking at that it says that the Storgae = Drive-0 is wrong. Should this be set to Device = Autochanger? Looking at the configuration it looks like you can have multiple Device {} sections but the names must be different? Any help would be appreciated. If this is explained in the manual than pointing to that section is fine. Thanks in Advance. John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! --- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnkkid=110944bid=241720dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
RE: [Bacula-users] Newbie Configuration Question
OK I see where I made that mistake. I now get the following errors at startup: [EMAIL PROTECTED] bin]# ./bacula start Starting the Bacula Storage daemon Starting the Bacula File daemon Starting the Bacula Director daemon 17-Apr 13:27 bacula-dir: Fatal error: type directive in Job BackupCatalog resource is required, but not found. 17-Apr 13:27 bacula-dir: Fatal error: messages directive in Job BackupCatalog resource is required, but not found. 17-Apr 13:27 bacula-dir: Fatal error: storage directive in Job BackupCatalog resource is required, but not found. 17-Apr 13:27 bacula-dir: Fatal error: pool directive in Job BackupCatalog resource is required, but not found. 17-Apr 13:27 bacula-dir: Fatal error: client directive in Job BackupCatalog resource is required, but not found. 17-Apr 13:27 bacula-dir ERROR TERMINATION Please correct configuration file: /root/bacula/bin/bacula-dir.conf Looking at bacula-dir.conf the BackupCatalog resource is entered twice in my configuration. The first one was the default that is made at Install and has the JobDefs set to DefaultJob. I copied this and changed the JobDefs field to point to MainJob. Is this correct? John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! Robert Nelson [EMAIL PROTECTED] 04/17/06 12:37 PM You need to add a storage resource to bacula-dir.conf. This is the abstraction for a device controlled by a Storage Daemon. You probably want something like Storage { Name = name, this is what you put in the Job / JobDefs Address = IP Address or Name of system running bacula-sd SDPort = 9103 Must match the Storage resource in bacula-sd.conf Password = password matching the one in the Director resource in bacula-sd.conf Device = Drive-0 Media Type = LTO-2 } --- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnkkid=110944bid=241720dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
RE: [Bacula-users] Newbie Configuration Question
Ok. Thanks to Robert and some more RTFM work I was able to start bacula. I now have a new issue. This is the first time running this so bacula sees that no Full backup was performed and elevates the differential to a Full. Here is what I get: *run A job name must be specified. The defined Job resources are: 1: Client1 2: Client2 3: BackupCatalog 4: RestoreFiles Select Job resource (1-4): 2 Run Backup job JobName: Client2 FileSet: Full Set Level:Incremental Client: jerome-fd Storage: Drive-0 Pool: Default When: 2006-04-17 14:21:22 Priority: 10 OK to run? (yes/mod/no): yes Job started. JobId=17 * 17-Apr 14:21 jerome-dir: No prior Full backup Job record found. 17-Apr 14:21 jerome-dir: No prior or suitable Full backup found. Doing FULL backup. 17-Apr 14:21 jerome-dir: Start Backup JobId 17, Job=Client2.2006-04-17_14.21.32 17-Apr 14:21 jerome-sd: Job Client2.2006-04-17_14.21.32 waiting. Cannot find any appendable volumes. Please use the label command to create a new Volume for: Storage: Drive-0 (/dev/nst1) Media type: LTO-2 Pool: Default *label The defined Storage resources are: 1: File 2: Drive-0 Select Storage resource (1-2): 2 Enter new Volume name: Volume1 Enter slot (0 or Enter for none): 1 Automatically selected Pool: Default Connecting to Storage daemon Drive-0 at jerome:9103 ... Sending label command for Volume Volume1 Slot 1 ... 3301 Issuing autochanger loaded drive 0 command. 3302 Autochanger loaded drive 0, result: nothing loaded. 3304 Issuing autochanger load slot 1, drive 0 command. 3305 Autochanger load slot 1, drive 0, status is OK. 3301 Issuing autochanger loaded drive 0 command. 3302 Autochanger loaded drive 0, result is Slot 1. dev.c:362 dev.c:356 Unable to open device Drive-0 (/dev/nst1): ERR=Input/output error 3910 Unable to open device Drive-0 (/dev/nst1): ERR=dev.c:356 Unable to open device Drive-0 (/dev/nst1): ERR=Input/output error Label command failed for Volume Volume1. Do not forget to mount the drive!!! I watched the staus on the Dell-124T and bacula was succesful in loading the tape from Slot 1 into the drive. So why didn't it label the tape? Since I have 8 tapes in this magazine do I have to label each tape? John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! --- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnkkid=110944bid=241720dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Re: testing autochanger Dell-124T
Pierre, Thanks for the reply and it gives me some confidence. I am now just trying to learn how to configure bacula. I am a bit dense when it comes to following the examples in the manual. John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia 222 North 17th Street Philadelphia, Pa. 19103 Tel: 215-965-1714 Fax: 215-587-3525 Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! Pierre Dibon [EMAIL PROTECTED] 04/14/06 3:32 AM Le Jeudi 13 Avril 2006 21:51, Fred Kass a écrit : John Boris jboris at adphila.org writes: I have a Dell 124T with a CERTANCE Drive installed. I am running Fedora Core 3. I am following the manual to test bacula with my setup. ... It looks like it never changed the tape. If the idea of the fill test is to see if it will go from tape to tape without intervention, then I must have something misconfigured. Anyone on the list using the Dell-124T and can shed some light? John, Did you find a resolution to this problem elsewhere? I am considering the purchase of a tape loader and the 124T looks good on paper but after a lot of googling this is the first post I've seen with someone using a 124T and bacula, so far your results don't seem promising... ni ideas for john's problem but i can tell you that I use a 124T LTO2 autochanger with 2 magazines under a redhat entreprise server 4 without problems at all (nothing to do execpt catching the good device for the drive just doing something like cat /proc/scsi) Hey Kern! this thread is a good reason to add dell pv 124T to the list of devices working great with bacula isn't it? --- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnkkid0944bid$1720dat1642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users --- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnkkid0944bid$1720dat1642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] testing autochanger Dell-124T
I have a Dell 124T with a CERTANCE Drive installed. I am running Fedora Core 3. I am following the manual to test bacula with my setup. The main reason I am using Bacula is for the ability to write to a tape and append to the tape, when it is full load the next tape and keep going. So bacula is sitting on one server without any clients accessing it. Following the section : Testing Your Tape Drive with Bacula each step has went fine. I ran the autochanger test and there weren't any errors. When I tried the fill test from btape it will fill the first tape and give me this message: btape: btape.c:2301 Last block at: 308:8894 this_dev_block_num=8895 btape: btape.c:2335 End of tape 308:0. VolumeCapacity=212,140,903,480. Write rate = 25403.1 KB/s 06-Apr 14:18 btape: End of medium on Volume TestVolume1 Bytes=212,140,903,480 Blocks=3,288,395 at 06-Apr-2006 14:18. Mount blank Volume on device Drive-1 (/dev/nst1) and press return when ready: Per the Manual I just have to hit enter and the autochanger will unload the first tape and load the second. So I hit enter and get this message: 06-Apr 14:40 btape: 3301 Issuing autochanger loaded drive 0 command. 06-Apr 14:40 btape: 3302 Autochanger loaded drive 0, result is Slot 1. Wrote Volume label for volume TestVolume2. Mount second Volume on device Drive-1 (/dev/nst1) and press return when ready: So I hit enter and got this: 06-Apr 14:41 btape: 3301 Issuing autochanger loaded drive 0 command. 06-Apr 14:41 btape: 3302 Autochanger loaded drive 0, result is Slot 1. 06-Apr 14:41 btape: Wrote label to prelabeled Volume TestVolume2 on device Drive-1 (/dev/nst1) 06-Apr 14:41 btape: New volume TestVolume2 mounted on device Drive-1 (/dev/nst1) at 06-Apr-2006 14:41. Done writing ... Wrote End of Session label. Wrote state file last_block_num1=8894 last_block_num2=11 14:41:18 Done filling tapes at 0:13. Now beginning re-read of first tape ... Mount first tape. Press enter when ready: I hit enter and then got this: 06-Apr 14:41 btape: 3301 Issuing autochanger loaded drive 0 command. 06-Apr 14:41 btape: 3302 Autochanger loaded drive 0, result is Slot 1. 06-Apr 14:41 btape: btape Warning: acquire.c:226 Wrong Volume mounted on device Drive-1 (/dev/nst1): Wanted TestVolume1 have TestVolume2 Mount Volume TestVolume1 on device Drive-1 (/dev/nst1) and press return when ready: It looks like it never changed the tape. If the idea of the fill test is to see if it will go from tape to tape without intervention, then I must have something misconfigured. Anyone on the list using the Dell-124T and can shed some light? Thanks. --- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnkkid=110944bid=241720dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] testing autochanger Dell-124T
I have a Dell 124T with a CERTANCE Drive installed. I am running Fedora Core 3. I am following the manual to test bacula with my setup. The main reason I am using Bacula is for the ability to write to a tape and append to the tape, when it is full load the next tape and keep going. So bacula is sitting on one server without any clients accessing it. Following the section : Testing Your Tape Drive with Bacula each step has went fine. I ran the autochanger test and there weren't any errors. When I tried the fill test from btape it will fill the first tape and give me this message: btape: btape.c:2301 Last block at: 308:8894 this_dev_block_num=8895 btape: btape.c:2335 End of tape 308:0. VolumeCapacity=212,140,903,480. Write rate = 25403.1 KB/s 06-Apr 14:18 btape: End of medium on Volume TestVolume1 Bytes=212,140,903,480 Blocks=3,288,395 at 06-Apr-2006 14:18. Mount blank Volume on device Drive-1 (/dev/nst1) and press return when ready: Per the Manual I just have to hit enter and the autochanger will unload the first tape and load the second. So I hit enter and get this message: 06-Apr 14:40 btape: 3301 Issuing autochanger loaded drive 0 command. 06-Apr 14:40 btape: 3302 Autochanger loaded drive 0, result is Slot 1. Wrote Volume label for volume TestVolume2. Mount second Volume on device Drive-1 (/dev/nst1) and press return when ready: So I hit enter and got this: 06-Apr 14:41 btape: 3301 Issuing autochanger loaded drive 0 command. 06-Apr 14:41 btape: 3302 Autochanger loaded drive 0, result is Slot 1. 06-Apr 14:41 btape: Wrote label to prelabeled Volume TestVolume2 on device Drive-1 (/dev/nst1) 06-Apr 14:41 btape: New volume TestVolume2 mounted on device Drive-1 (/dev/nst1) at 06-Apr-2006 14:41. Done writing ... Wrote End of Session label. Wrote state file last_block_num1=8894 last_block_num2=11 14:41:18 Done filling tapes at 0:13. Now beginning re-read of first tape ... Mount first tape. Press enter when ready: I hit enter and then got this: 06-Apr 14:41 btape: 3301 Issuing autochanger loaded drive 0 command. 06-Apr 14:41 btape: 3302 Autochanger loaded drive 0, result is Slot 1. 06-Apr 14:41 btape: btape Warning: acquire.c:226 Wrong Volume mounted on device Drive-1 (/dev/nst1): Wanted TestVolume1 have TestVolume2 Mount Volume TestVolume1 on device Drive-1 (/dev/nst1) and press return when ready: It looks like it never changed the tape. If the idea of the fill test is to see if it will go from tape to tape without intervention, then I must have something misconfigured. Anyone on the list using the Dell-124T and can shed some light? Thanks. --- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnkkid=110944bid=241720dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] New user Question about GUI Interface
I am evaluating Bacula and would like to know if the enable-gnome option is required. Does the GNOME interface make this package easier to configure and maintain? The problem I have is my Fedora Core 3 Server was installed without X Windows and I haven't found any sort of docs that explains how to install it after the fact. So should I install X Windows on my server or not? Thanks in Advance John J. Boris, Sr. JEN-A-SyS Administrator Archdiocese of Philadelphia Remember! That light at the end of the tunnel Just might be the headlight of an oncoming train! --- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnkkid=110944bid=241720dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users