Re: [OSL | CCIE_Voice] Gatekeeper acting weird for codec
It because you have Inbound faststart configured on your gk trunk. You do this so your sip phones will be able to call from cme to hq. The thing is the call is G729 but call manager will negotiate G711 with faststart enabled going that direction. Take off the checkmark for inbound faststart and the call will be 16k (test with your sccp phone), but you just now broken your calls for the sip phones so you need it checked for all phones to work. Jason On Jun 14, 2012, at 8:10 AM, Krishna < vinayak_...@yahoo.com > wrote: Hi folks, I configured the gatekeeper on the Hq router, and when i call from hq to br2(cme) the call set up shows as 16 kbps, but whereas from cme to hq it shows as 128 kbps but the actual call is connected with g729. Even after the call got connected, it stills shows as 128 in the show gatekeeper call. here is the output status: i put the gk-trunk in the hq region as well. any help is much appreciated on this matter. BR2-RTR(config)#do sh voice call stat CallID CID ccVdb Port DSP/Ch Called # Codec Dial-peers 0xC0 13B3 0x49DA073C 50/0/2.0 95002 g729r8 20002/15 1 active call found HQ-RTR(config-gk)#do sh gatek call Total number of active calls = 1. largest hash bucket = 1 GATEKEEPER CALL INFO LocalCallID Age(secs) BW 62-42307 579 33 128(Kbps) ConferenceID CallID SrcCRV A5CF2B43 B52E11E1 81D2B06F 708A730B A5CF2B43 B52E11E1 81D4B06F 708A730B 85 Endpt(s): Alias E.164Addr src EP: BR2-RTR 3002 CallSignalAddr Port RASSignalAddr Port 10.10.110.3 1820 10.10.110.3 62007 Endpt(s): Alias E.164Addr dst EP: gk-trunk_1 95002 CallSignalAddr Port RASSignalAddr Port 10.10.210.10 1720 10.10.210.10 32784 callstate: SEP, DEP, Thank you Krishna. ___ For more information regarding industry leading CCIE Lab training, please visit http://www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out http://www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 76, Issue 42
Thanks to Justin , Randell for your awesome help. I will try this setting in my next lab, and let you know with the updates. Thanks a lot once again for all of you.. Krishna. From: Justin McIntyre To: "ccie_voice@onlinestudylist.com" Sent: Thursday, June 14, 2012 7:55 AM Subject: Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 76, Issue 42 Randall is correct here. UCM will always divert to the intra-region Service Parameter settings. Change this to 729 and then hard code your codec between regions within the region parameters section. Thanks, Justin McIntyre Engineer Mutual Telecom Services Inc. a wholly-owned subsidiary of Black Box Corp. COMM: (434)-946-1562 DSN: (312)-237-1562 CELL: (540)-312-9391 FAX: (434)-946-1510 -Original Message- Message: 6 Date: Thu, 14 Jun 2012 00:14:03 -0700 From: Rrcrumm To: Krishna Cc: "ccie_voice@onlinestudylist.com" Subject: Re: [OSL | CCIE_Voice] Gatekeeper acting weird for codec Message-ID: <0d193090-0965-4053-9d15-0a2d160ea...@yahoo.com> Content-Type: text/plain; charset="us-ascii" I think I remember some tone a k this situation. You chance the setting is service parameters for intra region to g729 HTH Randall Sent from my iPhone On Jun 13, 2012, at 9:10 PM, Krishna wrote: > Hi folks, > > I configured the gatekeeper on the Hq router, and when i call from hq to > br2(cme) the call set up shows as 16 kbps, but whereas from cme to hq it > shows as 128 kbps but the actual call is connected with g729. Even after the > call got connected, it stills shows as 128 in the show gatekeeper call. here > is the output status: > > i put the gk-trunk in the hq region as well. any help is much appreciated on > this matter. > > BR2-RTR(config)#do sh voice call stat > CallID CID ccVdb Port DSP/Ch Called # Codec > Dial-peers > 0xC0 13B3 0x49DA073C 50/0/2.0 95002 g729r8 > 20002/15 > 1 active call found > > HQ-RTR(config-gk)#do sh gatek call > Total number of active calls = 1. > > largest hash bucket = 1 > GATEKEEPER CALL INFO > > LocalCallID Age(secs) BW > 62-42307 579 33 128(Kbps) > ConferenceID CallID > SrcCRV > A5CF2B43 B52E11E1 81D2B06F 708A730B A5CF2B43 B52E11E1 81D4B06F 708A730B 85 > Endpt(s): Alias E.164Addr > src EP: BR2-RTR 3002 > CallSignalAddr Port RASSignalAddr Port > 10.10.110.3 1820 10.10.110.3 62007 > Endpt(s): Alias E.164Addr > dst EP: gk-trunk_1 95002 > CallSignalAddr Port RASSignalAddr Port > 10.10.210.10 1720 10.10.210.10 32784 > callstate: SEP, DEP, > > > Thank you > > Krishna. > ___ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com -- next part -- An HTML attachment was scrubbed... URL: -- ___ CCIE_Voice mailing list CCIE_Voice@onlinestudylist.com http://onlinestudylist.com/mailman/listinfo/ccie_voice End of CCIE_Voice Digest, Vol 76, Issue 42 ** This email and any files transmitted with it are confidential and are intended for the sole use of the individual to whom they are addressed. Black Box Corporation reserves the right to scan all e-mail traffic for restricted content and to monitor all e-mail in general. If you are not the intended recipient or you have received this email in error, any use, dissemination or forwarding of this email is strictly prohibited. If you have received this email in error, please notify the sender by replying to this email. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] Message
Somebody from the group sent me a private message, but somehow I managed to lose this message. This message was sent on my Facebook page, and I received it on my iPad. So when I checked it on my computer, the message was gone. If you wanna know anything about the exam, I won't break NDA but I will be more than willing to share a little of my experience on my two attempts. My next attempt is coming up, but this one will be undisclosed. Personal reasons :) Wanna send me a message? Please do so on my e-mail, I guarantee I won't lose the message! :) Best regards *Emanuel Damasceno* CCNP Voice ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
[OSL | CCIE_Voice] BAT file (easy mode)
Hey guys, Does anyone here has the BAT file for CUCM 8.6.2a? I am just asking this because I am in need of this file and I don't want to install it in my system just to be able to download the file from the installed CUCM... Anyone? Thanks in advance. *Emanuel Damasceno* CCNP Voice ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 76, Issue 42
Randall is correct here. UCM will always divert to the intra-region Service Parameter settings. Change this to 729 and then hard code your codec between regions within the region parameters section. Thanks, Justin McIntyre Engineer Mutual Telecom Services Inc. a wholly-owned subsidiary of Black Box Corp. COMM: (434)-946-1562 DSN: (312)-237-1562 CELL: (540)-312-9391 FAX: (434)-946-1510 -Original Message- Message: 6 Date: Thu, 14 Jun 2012 00:14:03 -0700 From: Rrcrumm To: Krishna Cc: "ccie_voice@onlinestudylist.com" Subject: Re: [OSL | CCIE_Voice] Gatekeeper acting weird for codec Message-ID: <0d193090-0965-4053-9d15-0a2d160ea...@yahoo.com> Content-Type: text/plain; charset="us-ascii" I think I remember some tone a k this situation. You chance the setting is service parameters for intra region to g729 HTH Randall Sent from my iPhone On Jun 13, 2012, at 9:10 PM, Krishna wrote: > Hi folks, > > I configured the gatekeeper on the Hq router, and when i call from hq to > br2(cme) the call set up shows as 16 kbps, but whereas from cme to hq it > shows as 128 kbps but the actual call is connected with g729. Even after the > call got connected, it stills shows as 128 in the show gatekeeper call. here > is the output status: > > i put the gk-trunk in the hq region as well. any help is much appreciated on > this matter. > > BR2-RTR(config)#do sh voice call stat > CallID CID ccVdb Port DSP/Ch Called # Codec > Dial-peers > 0xC0 13B3 0x49DA073C 50/0/2.0 95002 g729r8 > 20002/15 > 1 active call found > > HQ-RTR(config-gk)#do sh gatek call > Total number of active calls = 1. > > largest hash bucket = 1 > GATEKEEPER CALL INFO > > LocalCallIDAge(secs) BW > 62-4230757933 128(Kbps) > ConferenceID CallID > SrcCRV > A5CF2B43 B52E11E1 81D2B06F 708A730B A5CF2B43 B52E11E1 81D4B06F 708A730B 85 > Endpt(s): Alias E.164Addr >src EP: BR2-RTR 3002 >CallSignalAddr Port RASSignalAddr Port >10.10.110.3 1820 10.10.110.3 62007 > Endpt(s): Alias E.164Addr >dst EP: gk-trunk_195002 >CallSignalAddr Port RASSignalAddr Port >10.10.210.101720 10.10.210.1032784 > callstate: SEP, DEP, > > > Thank you > > Krishna. > ___ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com -- next part -- An HTML attachment was scrubbed... URL: -- ___ CCIE_Voice mailing list CCIE_Voice@onlinestudylist.com http://onlinestudylist.com/mailman/listinfo/ccie_voice End of CCIE_Voice Digest, Vol 76, Issue 42 ** This email and any files transmitted with it are confidential and are intended for the sole use of the individual to whom they are addressed. Black Box Corporation reserves the right to scan all e-mail traffic for restricted content and to monitor all e-mail in general. If you are not the intended recipient or you have received this email in error, any use, dissemination or forwarding of this email is strictly prohibited. If you have received this email in error, please notify the sender by replying to this email. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] [MVA - CALLER PARTY NAME]
Michael, I can replicate your observed behaviour by the following: From the RDP, select the associated line on the top left. When the "Directory Number Configuration" page appears, scroll down to "Line 1 on Device X" where X is your RDP name. If I leave the "Display ID" field(s) blank, I do not see any Calling Name displayed whilst the destination phone is ringing. If I complete this field (copy from the line configuration on the associated phone, usually) then the Calling Name is displayed OK. I may have other configuration/parameters set differently from you, but these are the settings I alter to make this appear or not appear in my Lab. What version of CUCM are you running? I am slighlty "up level" from 7.0.1, so it may work in my lab but not in _the_ Lab, if you follow me :-) YMMV, but hope this helps. regards Peter On 13/06/2012 17:39, michael.se...@compucom.com wrote: Greetings, I'm working on a MVA lab that's asking for the 4 digit calling number and the name. MVA is working perfectly, but nothing I do seems to enable the calling party name. Has anyone been able to accomplish sending the calling name when making an MVA call? If so please share how you did it. If I make the MVA call it only presents the four digits which is ok, but it won't show the calling name until the call is answered. I've read many articles, some of which provide solutions that don't work and some that say it's not supported so I'm looking for the definitive answer on whether this can be done or not. Any feedback appreciated. Thank you, --ms ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Gatekeeper acting weird for codec
I think I remember some tone a k this situation. You chance the setting is service parameters for intra region to g729 HTH Randall Sent from my iPhone On Jun 13, 2012, at 9:10 PM, Krishna wrote: > Hi folks, > > I configured the gatekeeper on the Hq router, and when i call from hq to > br2(cme) the call set up shows as 16 kbps, but whereas from cme to hq it > shows as 128 kbps but the actual call is connected with g729. Even after the > call got connected, it stills shows as 128 in the show gatekeeper call. here > is the output status: > > i put the gk-trunk in the hq region as well. any help is much appreciated on > this matter. > > BR2-RTR(config)#do sh voice call stat > CallID CID ccVdb Port DSP/Ch Called # Codec > Dial-peers > 0xC0 13B3 0x49DA073C 50/0/2.0 95002 g729r8 > 20002/15 > 1 active call found > > HQ-RTR(config-gk)#do sh gatek call > Total number of active calls = 1. > > largest hash bucket = 1 > GATEKEEPER CALL INFO > > LocalCallIDAge(secs) BW > 62-4230757933 128(Kbps) > ConferenceID CallID > SrcCRV > A5CF2B43 B52E11E1 81D2B06F 708A730B A5CF2B43 B52E11E1 81D4B06F 708A730B 85 > Endpt(s): Alias E.164Addr >src EP: BR2-RTR 3002 >CallSignalAddr Port RASSignalAddr Port >10.10.110.3 1820 10.10.110.3 62007 > Endpt(s): Alias E.164Addr >dst EP: gk-trunk_195002 >CallSignalAddr Port RASSignalAddr Port >10.10.210.101720 10.10.210.1032784 > callstate: SEP, DEP, > > > Thank you > > Krishna. > ___ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] CME SIP Phone -- Unity Connection DTMF issue
Please clarify your scenario. Is you cuc integrated witn cucm or directly with cme? Is it sip or sccp integration? How the codecs all over the path are configured. Regards, Mohammed Al Baqari Sent from my iPhone On Jun 13, 2012, at 10:13 PM, Pavan K wrote: > CME SIP Phone is in remote site with cRTP enabled between the CME & HQ > sites so RFC2833 / rtp-nte is un-usable. > > The only other option on CME SIP Phones is sip-notify. > The available options on the dial-peer are sip-notify & sip-kpml. > The only option on Unity Connection is sip-kpml (RFC2833 cannot be used). > > Everything i have read / tried seems to indicate that sip-notify / > sip-kpml do not work (even if using an XCODER). > > http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/integration/cucme_sip/guide/cucintcucmesip030.html#wp1094879 > > > Did anybody get sip-kpml / sip-notify to work with Unity connection from CME > ? > > -- > - Pavan > ___ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Gatekeeper acting weird for codec
Post the output of "sh call leg active summary" in cme. Also, share br2 config plz. Regards, Mohammed Al Baqari Sent from my iPhone On Jun 14, 2012, at 8:10 AM, Krishna wrote: > Hi folks, > > I configured the gatekeeper on the Hq router, and when i call from hq to > br2(cme) the call set up shows as 16 kbps, but whereas from cme to hq it > shows as 128 kbps but the actual call is connected with g729. Even after the > call got connected, it stills shows as 128 in the show gatekeeper call. here > is the output status: > > i put the gk-trunk in the hq region as well. any help is much appreciated on > this matter. > > BR2-RTR(config)#do sh voice call stat > CallID CID ccVdb Port DSP/Ch Called # Codec > Dial-peers > 0xC0 13B3 0x49DA073C 50/0/2.0 95002 g729r8 > 20002/15 > 1 active call found > > HQ-RTR(config-gk)#do sh gatek call > Total number of active calls = 1. > > largest hash bucket = 1 > GATEKEEPER CALL INFO > > LocalCallIDAge(secs) BW > 62-4230757933 128(Kbps) > ConferenceID CallID > SrcCRV > A5CF2B43 B52E11E1 81D2B06F 708A730B A5CF2B43 B52E11E1 81D4B06F 708A730B 85 > Endpt(s): Alias E.164Addr >src EP: BR2-RTR 3002 >CallSignalAddr Port RASSignalAddr Port >10.10.110.3 1820 10.10.110.3 62007 > Endpt(s): Alias E.164Addr >dst EP: gk-trunk_195002 >CallSignalAddr Port RASSignalAddr Port >10.10.210.101720 10.10.210.1032784 > callstate: SEP, DEP, > > > Thank you > > Krishna. > ___ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com