Re: [OSL | CCIE_Voice] B Channel Busy Out
Hi Jason, I have question about step # 9 clear counters is it the normal clear counter command? e.x: E1 card clear counter interface s x/y/z:15 Thanks On Wed, Feb 27, 2013 at 3:02 PM, Jason Lee jas7...@gmail.com wrote: I use this as a strategy for checking my gateway configuration Ensure that your are meeting requirements on the following 1. display-ie 2. BCHAN order selection (Ascending, Descending) 3. BCHAN number 1. How many BCHANs? 1. If not specified create a full PRI. 2. If fractional 1. Set BCHAN Maintenance in Advanced Service Parameters 2. Check the *Check Status *checkbox in GW config 4. Clocking 1. Network clock participate 2. network clock select 1 t10/0/0 5. ISDN Switch-Type 6. Source-Address 7. 911 1. Done in gateway section. 1. Make sure to have routed correctly, SLRG?, 8. Direct Inward Dial 9. clear counters On Wed, Feb 27, 2013 at 3:38 AM, Jamie Parr (jamparr) jamp...@cisco.comwrote: I am also curious as to the grading on the gateways, I received very low marks on this section. Can anyone help? ** ** Thanks ** ** *Jamie Parr* Engineer - IT jamp...@cisco.com Phone: *+44 20 8824 2641* Mobile: *+44 7590622049* ** ** *From:* ccie_voice-boun...@onlinestudylist.com [mailto: ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Pixar Perfect *Sent:* 26 February 2013 19:35 *To:* Steve Keller; GARY CLARK *Cc:* CCIE Voice OSL *Subject:* [OSL | CCIE_Voice] B Channel Busy Out ** ** Gary ..you mentioned B channel busyout on service parameter. in my understanding this was only needed when you would download the GW config from CCM i.e., ccm-manager config. it doesn't make any sense to use this service parameter as most of the solution guides (INE, IPXEPERT, 360) do not encourage the use of ccm-manager config except initial stage of your config and then disable it. I have heard ppl who passed just using standard configs but not sure if they did the B channel busy out on service parameter. ** ** ** ** mgcp mgcp call-agent 10.10.210.11 --sub mgcp dtmf mgcp bind ... (2x2) ** ** ccm-mana fall ccm-mana music ccm-mana mgcp ccm-mana red 10.10.210.10 -- pub ** ** ** ** if B channel status is *really graded *on the exam then it is one of those things that doesn't make sense to have it there but is needed to score points [image: Emoji] ** ** experts, any comments or advise from the recent Experts ? ** ** ** ** PIXAR ** ** ** ** -- Date: Mon, 25 Feb 2013 14:31:12 -0500 From: skeller...@gmail.com To: garyclark...@gmail.com CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] lab7 failed for 1% I recieved 29% in RTP on GW Signalling section and Call Routing as well. I am very discouraged i could score very low marks on these sections as i took my time and felt like i had nailed them. I scored really well in all other areas but failed because of these 2 sections. It is a mystery to me what the proctor is doing to arrive at that score, when all my calls worked, the debugs matched the requirements, i was binding to the correct interfaces, setting up the correct protocol and channels,etc. I would love to hear what insight folks have as to why the scores could be so low when everything looked to be working beautifully, without breaking NDA of course. thanks steve On Mon, Feb 25, 2013 at 1:54 PM, GARY CLARK garyclark...@gmail.com wrote: Hi friends, I got lab 7 in SJC and i completed that in 6 hrs and tested for 2 hrs time. I thought i have passed 1000% but when i saw my result i was surprised.** ** I almost got everywhere 100% except VG / 29% which was 17 marks section.* *** Same story with my friends do anyone got 100% in VG for lab 7 If anyone interested to share the hidden secrets then welcome as people are getting lab 7 repeating now very eager to understand what could be wrong. Please email me for further discussion. We 3 friends attempted out of which i also did busy out channel but that also did not helped its 29% only why so ** ** Regards ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Re: [OSL | CCIE_Voice] B Channel Busy Out
The B-channel selection order is always default i.e, descending. Date: Sat, 9 Mar 2013 22:29:01 +0300 From: aboaz...@gmail.com To: jas7...@gmail.com CC: ccie_voice@onlinestudylist.com; garyclark...@gmail.com Subject: Re: [OSL | CCIE_Voice] B Channel Busy Out Hi Jason, I have question about step # 9 clear counters is it the normal clear counter command? e.x: E1 cardclear counter interface s x/y/z:15 Thanks On Wed, Feb 27, 2013 at 3:02 PM, Jason Lee jas7...@gmail.com wrote: I use this as a strategy for checking my gateway configuration Ensure that your are meeting requirements on the following display-ieBCHAN order selection (Ascending, Descending)BCHAN numberHow many BCHANs? If not specified create a full PRI. If fractionalSet BCHAN Maintenance in Advanced Service ParametersCheck the Check Status checkbox in GW configClockingNetwork clock participate network clock select 1 t10/0/0ISDN Switch-TypeSource-Address911Done in gateway section. Make sure to have routed correctly, SLRG?, Direct Inward Dial clear counters On Wed, Feb 27, 2013 at 3:38 AM, Jamie Parr (jamparr) jamp...@cisco.com wrote: I am also curious as to the grading on the gateways, I received very low marks on this section. Can anyone help? Thanks Jamie Parr Engineer - IT jamp...@cisco.com Phone: +44 20 8824 2641 Mobile: +44 7590622049 From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Pixar Perfect Sent: 26 February 2013 19:35 To: Steve Keller; GARY CLARK Cc: CCIE Voice OSL Subject: [OSL | CCIE_Voice] B Channel Busy Out Gary ..you mentioned B channel busyout on service parameter. in my understanding this was only needed when you would download the GW config from CCM i.e., ccm-manager config. it doesn't make any sense to use this service parameter as most of the solution guides (INE, IPXEPERT, 360) do not encourage the use of ccm-manager config except initial stage of your config and then disable it. I have heard ppl who passed just using standard configs but not sure if they did the B channel busy out on service parameter. mgcp mgcp call-agent 10.10.210.11 --sub mgcp dtmf mgcp bind ... (2x2) ccm-mana fall ccm-mana music ccm-mana mgcp ccm-mana red 10.10.210.10 -- pub if B channel status is really graded on the exam then it is one of those things that doesn't make sense to have it there but is needed to score points experts, any comments or advise from the recent Experts ? PIXAR Date: Mon, 25 Feb 2013 14:31:12 -0500 From: skeller...@gmail.com To: garyclark...@gmail.com CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] lab7 failed for 1% I recieved 29% in RTP on GW Signalling section and Call Routing as well. I am very discouraged i could score very low marks on these sections as i took my time and felt like i had nailed them. I scored really well in all other areas but failed because of these 2 sections. It is a mystery to me what the proctor is doing to arrive at that score, when all my calls worked, the debugs matched the requirements, i was binding to the correct interfaces, setting up the correct protocol and channels,etc. I would love to hear what insight folks have as to why the scores could be so low when everything looked to be working beautifully, without breaking NDA of course. thanks steve On Mon, Feb 25, 2013 at 1:54 PM, GARY CLARK garyclark...@gmail.com wrote: Hi friends, I got lab 7 in SJC and i completed that in 6 hrs and tested for 2 hrs time. I thought i have passed 1000% but when i saw my result i was surprised. I almost got everywhere 100% except VG / 29% which was 17 marks section. Same story with my friends do anyone got 100% in VG for lab 7 If anyone interested to share the hidden secrets then welcome as people are getting lab 7 repeating now very eager to understand what could be wrong. Please email me for further discussion. We 3 friends attempted out of which i also did busy out channel but that also did not helped its 29% only why so Regards ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE
Re: [OSL | CCIE_Voice] B Channel Busy Out
I am also curious as to the grading on the gateways, I received very low marks on this section. Can anyone help? Thanks Jamie Parr Engineer - IT jamp...@cisco.commailto:jamp...@cisco.com Phone: +44 20 8824 2641 Mobile: +44 7590622049 From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Pixar Perfect Sent: 26 February 2013 19:35 To: Steve Keller; GARY CLARK Cc: CCIE Voice OSL Subject: [OSL | CCIE_Voice] B Channel Busy Out Gary ..you mentioned B channel busyout on service parameter. in my understanding this was only needed when you would download the GW config from CCM i.e., ccm-manager config. it doesn't make any sense to use this service parameter as most of the solution guides (INE, IPXEPERT, 360) do not encourage the use of ccm-manager config except initial stage of your config and then disable it. I have heard ppl who passed just using standard configs but not sure if they did the B channel busy out on service parameter. mgcp mgcp call-agent 10.10.210.11 --sub mgcp dtmf mgcp bind ... (2x2) ccm-mana fall ccm-mana music ccm-mana mgcp ccm-mana red 10.10.210.10 -- pub if B channel status is really graded on the exam then it is one of those things that doesn't make sense to have it there but is needed to score points [Emoji] experts, any comments or advise from the recent Experts ? PIXAR Date: Mon, 25 Feb 2013 14:31:12 -0500 From: skeller...@gmail.commailto:skeller...@gmail.com To: garyclark...@gmail.commailto:garyclark...@gmail.com CC: ccie_voice@onlinestudylist.commailto:ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] lab7 failed for 1% I recieved 29% in RTP on GW Signalling section and Call Routing as well. I am very discouraged i could score very low marks on these sections as i took my time and felt like i had nailed them. I scored really well in all other areas but failed because of these 2 sections. It is a mystery to me what the proctor is doing to arrive at that score, when all my calls worked, the debugs matched the requirements, i was binding to the correct interfaces, setting up the correct protocol and channels,etc. I would love to hear what insight folks have as to why the scores could be so low when everything looked to be working beautifully, without breaking NDA of course. thanks steve On Mon, Feb 25, 2013 at 1:54 PM, GARY CLARK garyclark...@gmail.commailto:garyclark...@gmail.com wrote: Hi friends, I got lab 7 in SJC and i completed that in 6 hrs and tested for 2 hrs time. I thought i have passed 1000% but when i saw my result i was surprised. I almost got everywhere 100% except VG / 29% which was 17 marks section. Same story with my friends do anyone got 100% in VG for lab 7 If anyone interested to share the hidden secrets then welcome as people are getting lab 7 repeating now very eager to understand what could be wrong. Please email me for further discussion. We 3 friends attempted out of which i also did busy out channel but that also did not helped its 29% only why so Regards ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.comhttp://www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.comhttp://www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.comhttp://www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.comhttp://www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] B Channel Busy Out
I use this as a strategy for checking my gateway configuration Ensure that your are meeting requirements on the following 1. display-ie 2. BCHAN order selection (Ascending, Descending) 3. BCHAN number 1. How many BCHANs? 1. If not specified create a full PRI. 2. If fractional 1. Set BCHAN Maintenance in Advanced Service Parameters 2. Check the *Check Status *checkbox in GW config 4. Clocking 1. Network clock participate 2. network clock select 1 t10/0/0 5. ISDN Switch-Type 6. Source-Address 7. 911 1. Done in gateway section. 1. Make sure to have routed correctly, SLRG?, 8. Direct Inward Dial 9. clear counters On Wed, Feb 27, 2013 at 3:38 AM, Jamie Parr (jamparr) jamp...@cisco.comwrote: I am also curious as to the grading on the gateways, I received very low marks on this section. Can anyone help? ** ** Thanks ** ** *Jamie Parr* Engineer - IT jamp...@cisco.com Phone: *+44 20 8824 2641* Mobile: *+44 7590622049* ** ** *From:* ccie_voice-boun...@onlinestudylist.com [mailto: ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Pixar Perfect *Sent:* 26 February 2013 19:35 *To:* Steve Keller; GARY CLARK *Cc:* CCIE Voice OSL *Subject:* [OSL | CCIE_Voice] B Channel Busy Out ** ** Gary ..you mentioned B channel busyout on service parameter. in my understanding this was only needed when you would download the GW config from CCM i.e., ccm-manager config. it doesn't make any sense to use this service parameter as most of the solution guides (INE, IPXEPERT, 360) do not encourage the use of ccm-manager config except initial stage of your config and then disable it. I have heard ppl who passed just using standard configs but not sure if they did the B channel busy out on service parameter. ** ** ** ** mgcp mgcp call-agent 10.10.210.11 --sub mgcp dtmf mgcp bind ... (2x2) ** ** ccm-mana fall ccm-mana music ccm-mana mgcp ccm-mana red 10.10.210.10 -- pub ** ** ** ** if B channel status is *really graded *on the exam then it is one of those things that doesn't make sense to have it there but is needed to score points [image: Emoji] ** ** experts, any comments or advise from the recent Experts ? ** ** ** ** PIXAR ** ** ** ** -- Date: Mon, 25 Feb 2013 14:31:12 -0500 From: skeller...@gmail.com To: garyclark...@gmail.com CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] lab7 failed for 1% I recieved 29% in RTP on GW Signalling section and Call Routing as well. I am very discouraged i could score very low marks on these sections as i took my time and felt like i had nailed them. I scored really well in all other areas but failed because of these 2 sections. It is a mystery to me what the proctor is doing to arrive at that score, when all my calls worked, the debugs matched the requirements, i was binding to the correct interfaces, setting up the correct protocol and channels,etc. I would love to hear what insight folks have as to why the scores could be so low when everything looked to be working beautifully, without breaking NDA of course. thanks steve On Mon, Feb 25, 2013 at 1:54 PM, GARY CLARK garyclark...@gmail.com wrote: Hi friends, I got lab 7 in SJC and i completed that in 6 hrs and tested for 2 hrs time. I thought i have passed 1000% but when i saw my result i was surprised.*** * I almost got everywhere 100% except VG / 29% which was 17 marks section.** ** Same story with my friends do anyone got 100% in VG for lab 7 If anyone interested to share the hidden secrets then welcome as people are getting lab 7 repeating now very eager to understand what could be wrong. Please email me for further discussion. We 3 friends attempted out of which i also did busy out channel but that also did not helped its 29% only why so ** ** Regards ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE
[OSL | CCIE_Voice] B Channel Busy Out
Gary ..you mentioned B channel busyout on service parameter. in my understanding this was only needed when you would download the GW config from CCM i.e., ccm-manager config. it doesn't make any sense to use this service parameter as most of the solution guides (INE, IPXEPERT, 360) do not encourage the use of ccm-manager config except initial stage of your config and then disable it. I have heard ppl who passed just using standard configs but not sure if they did the B channel busy out on service parameter. mgcp mgcp call-agent 10.10.210.11 --submgcp dtmf mgcp bind ... (2x2) ccm-mana fallccm-mana musicccm-mana mgcpccm-mana red 10.10.210.10 -- pub if B channel status is really graded on the exam then it is one of those things that doesn't make sense to have it there but is needed to score points experts,any comments or advise from the recent Experts ? PIXAR Date: Mon, 25 Feb 2013 14:31:12 -0500 From: skeller...@gmail.com To: garyclark...@gmail.com CC: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] lab7 failed for 1% I recieved 29% in RTP on GW Signalling section and Call Routing as well. I am very discouraged i could score very low marks on these sections as i took my time and felt like i had nailed them. I scored really well in all other areas but failed because of these 2 sections. It is a mystery to me what the proctor is doing to arrive at that score, when all my calls worked, the debugs matched the requirements, i was binding to the correct interfaces, setting up the correct protocol and channels,etc. I would love to hear what insight folks have as to why the scores could be so low when everything looked to be working beautifully, without breaking NDA of course. thankssteve On Mon, Feb 25, 2013 at 1:54 PM, GARY CLARK garyclark...@gmail.com wrote: Hi friends, I got lab 7 in SJC and i completed that in 6 hrs and tested for 2 hrs time. I thought i have passed 1000% but when i saw my result i was surprised. I almost got everywhere 100% except VG / 29% which was 17 marks section. Same story with my friends do anyone got 100% in VG for lab 7 If anyone interested to share the hidden secrets then welcome as people are getting lab 7 repeating now very eager to understand what could be wrong. Please email me for further discussion. We 3 friends attempted out of which i also did busy out channel but that also did not helped its 29% only why so Regards ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com