Re: [cisco-voip] CUCM Native Presence (BLF/SD) populating Directories / Call Lists
BLFs don't generate missed call alerts. only DNs. It might be helpful to get a third phone (or IP Communicator) so you don't have to 'dial itself', that might be making things a little confusing to understand the various behaviors. On Tue, Dec 1, 2015 at 8:32 PM, Jeffrey Girard <jeffrey.gir...@girardinc.com > wrote: > Nate – > > Thanks for the reply. > > > > Yes, see below > > > > . Finally, I set the Enterprise Parameter “BLF for Call > Lists” to enabled. > > > > > > *From:* NateCCIE [mailto:natec...@gmail.com] > *Sent:* Tuesday, December 1, 2015 8:29 PM > *To:* Jeffrey Girard; cisco-voip@puck.nether.net > *Subject:* RE: [cisco-voip] CUCM Native Presence (BLF/SD) populating > Directories / Call Lists > > > > Do you have the enterprise parameter “BLF for call lists” enabled? > > > > *From:* cisco-voip [mailto:cisco-voip-boun...@puck.nether.net > <cisco-voip-boun...@puck.nether.net>] *On Behalf Of *Jeffrey Girard > *Sent:* Tuesday, December 01, 2015 6:20 PM > *To:* cisco-voip@puck.nether.net > *Subject:* [cisco-voip] CUCM Native Presence (BLF/SD) populating > Directories / Call Lists > > > > All – > > I have been lurking on this list for quite a while as I > continue to hone my collaboration skills. > > > > CAVEAT: This is not a production system and is not for > any customer. This is my lab as I continue to try to learn. > > > > CUCM v9 > > > > Desired endstate: Populate the Missed Calls with CUCM Native Presence / > Speed Dial information. > > > > What I have configured: > > > > 2 phones, both 7962s. Both have a BLF/SD pointing to the > other. One DN is 3001 and the other DN is 3002. BLF/SDs work fine. > Created a single partition that holds all the phones PT_Internal and a > single CSS that holds the partition CSS_Internal. On each of the 7962s, I > set the line SUBSCRIBE CSS to CSS_Internal. Finally, I set the Enterprise > Parameter “BLF for Call Lists” to enabled. > > > > However, if I go offhook on 3002 and dial itself, I see > the BLF light on 3001. If I don’t answer the call and then I check the > missed calls for 3001, I expect to see an entry for 3002. However, nothing > shows. If I go offhook on 3002, call 3001, let it ring and do not answer, > that missed call shows up as it should. > > > > My Directories are populated with information from when I > park calls, directed parks, but not the missed call tied to the BLF. > > > > Is this the expected behavior? Am I expecting to see > something (this missed call from 3002) that should not be there by design? > > > > Thanks, > > Jeff > > ___ > cisco-voip mailing list > cisco-voip@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-voip > > ___ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
Re: [cisco-voip] CUCM Native Presence (BLF/SD) populating Directories / Call Lists
The reason 3001 does not show a missed call is because 3001 did not miss any calls. The call was for 3002. A blinky light flashing is NOT a call. It's just a blinky light to tell you that someone else has a call. Enabling the "BLF for call lists" parameter means you can view people's presence status from your call lists. It has nothing to do with viewing other people's call lists. It sounds like maybe you're seeking a behaviour that would be better achieved with a shared DN. -mn From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Jeffrey Girard Sent: December-01-15 6:20 PM To: cisco-voip@puck.nether.net Subject: [cisco-voip] CUCM Native Presence (BLF/SD) populating Directories / Call Lists All - I have been lurking on this list for quite a while as I continue to hone my collaboration skills. CAVEAT: This is not a production system and is not for any customer. This is my lab as I continue to try to learn. CUCM v9 Desired endstate: Populate the Missed Calls with CUCM Native Presence / Speed Dial information. What I have configured: 2 phones, both 7962s. Both have a BLF/SD pointing to the other. One DN is 3001 and the other DN is 3002. BLF/SDs work fine. Created a single partition that holds all the phones PT_Internal and a single CSS that holds the partition CSS_Internal. On each of the 7962s, I set the line SUBSCRIBE CSS to CSS_Internal. Finally, I set the Enterprise Parameter "BLF for Call Lists" to enabled. However, if I go offhook on 3002 and dial itself, I see the BLF light on 3001. If I don't answer the call and then I check the missed calls for 3001, I expect to see an entry for 3002. However, nothing shows. If I go offhook on 3002, call 3001, let it ring and do not answer, that missed call shows up as it should. My Directories are populated with information from when I park calls, directed parks, but not the missed call tied to the BLF. Is this the expected behavior? Am I expecting to see something (this missed call from 3002) that should not be there by design? Thanks, Jeff ___ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
Re: [cisco-voip] CUCM Native Presence (BLF/SD) populating Directories / Call Lists
Do you have the enterprise parameter "BLF for call lists" enabled? From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Jeffrey Girard Sent: Tuesday, December 01, 2015 6:20 PM To: cisco-voip@puck.nether.net Subject: [cisco-voip] CUCM Native Presence (BLF/SD) populating Directories / Call Lists All - I have been lurking on this list for quite a while as I continue to hone my collaboration skills. CAVEAT: This is not a production system and is not for any customer. This is my lab as I continue to try to learn. CUCM v9 Desired endstate: Populate the Missed Calls with CUCM Native Presence / Speed Dial information. What I have configured: 2 phones, both 7962s. Both have a BLF/SD pointing to the other. One DN is 3001 and the other DN is 3002. BLF/SDs work fine. Created a single partition that holds all the phones PT_Internal and a single CSS that holds the partition CSS_Internal. On each of the 7962s, I set the line SUBSCRIBE CSS to CSS_Internal. Finally, I set the Enterprise Parameter "BLF for Call Lists" to enabled. However, if I go offhook on 3002 and dial itself, I see the BLF light on 3001. If I don't answer the call and then I check the missed calls for 3001, I expect to see an entry for 3002. However, nothing shows. If I go offhook on 3002, call 3001, let it ring and do not answer, that missed call shows up as it should. My Directories are populated with information from when I park calls, directed parks, but not the missed call tied to the BLF. Is this the expected behavior? Am I expecting to see something (this missed call from 3002) that should not be there by design? Thanks, Jeff ___ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip
Re: [cisco-voip] CUCM Native Presence (BLF/SD) populating Directories / Call Lists
Nate - Thanks for the reply. Yes, see below . Finally, I set the Enterprise Parameter "BLF for Call Lists" to enabled. From: NateCCIE [mailto:natec...@gmail.com] Sent: Tuesday, December 1, 2015 8:29 PM To: Jeffrey Girard; cisco-voip@puck.nether.net Subject: RE: [cisco-voip] CUCM Native Presence (BLF/SD) populating Directories / Call Lists Do you have the enterprise parameter "BLF for call lists" enabled? From: cisco-voip [mailto:cisco-voip-boun...@puck.nether.net] On Behalf Of Jeffrey Girard Sent: Tuesday, December 01, 2015 6:20 PM To: cisco-voip@puck.nether.net<mailto:cisco-voip@puck.nether.net> Subject: [cisco-voip] CUCM Native Presence (BLF/SD) populating Directories / Call Lists All - I have been lurking on this list for quite a while as I continue to hone my collaboration skills. CAVEAT: This is not a production system and is not for any customer. This is my lab as I continue to try to learn. CUCM v9 Desired endstate: Populate the Missed Calls with CUCM Native Presence / Speed Dial information. What I have configured: 2 phones, both 7962s. Both have a BLF/SD pointing to the other. One DN is 3001 and the other DN is 3002. BLF/SDs work fine. Created a single partition that holds all the phones PT_Internal and a single CSS that holds the partition CSS_Internal. On each of the 7962s, I set the line SUBSCRIBE CSS to CSS_Internal. Finally, I set the Enterprise Parameter "BLF for Call Lists" to enabled. However, if I go offhook on 3002 and dial itself, I see the BLF light on 3001. If I don't answer the call and then I check the missed calls for 3001, I expect to see an entry for 3002. However, nothing shows. If I go offhook on 3002, call 3001, let it ring and do not answer, that missed call shows up as it should. My Directories are populated with information from when I park calls, directed parks, but not the missed call tied to the BLF. Is this the expected behavior? Am I expecting to see something (this missed call from 3002) that should not be there by design? Thanks, Jeff ___ cisco-voip mailing list cisco-voip@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip