Bug#408750:
Perhaps this patch from Gentoo could solve the problem?: http://viewcvs.gentoo.org/viewcvs.py/gentoo-x86/sys-fs/udev/files/udev-104-persistent-net-fix-name-dups.patch?rev=1.1view=markup See also the corresponding BR: http://bugs.gentoo.org/show_bug.cgi?id=166486 -- David Härdeman -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411652: incomplete upload?
I just built the bacula source package (1.38.11-7) and the resulting packages don't have the mentioned problem. The +b1 does not show up in any of the version numbers of any of the built packages, which makes me (naively?) believe, that a proper rebuild would fix the problem in the archives, too. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411135: linux-image-2.6.18-4-sparc64-smp: Unknown symbol execve in module bbc
On Tue, Feb 20, 2007 at 10:22:40AM +, J.J. Green wrote: Finally got the thing compiled, and I can now load/unload the module too -- bug fixed, thanks very much. Unfortunately, when loaded, it spawns a kenvctrld which eats up almost 100% of one the CPUs, so unusable at present. But I've seen a report on the Ubuntu sparc lists with a (1 line) fix for this problem, so I'll have a crack at that now. Hi Jim, Are you talking about the patch like the one in http://lists.debian.org/debian-sparc/2007/02/msg00045.html ? Best regards, -- Jurij Smakov [EMAIL PROTECTED] Key: http://www.wooyd.org/pgpkey/ KeyID: C99E03CC -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#364466: Patch for the 7:2002edebian1-13.1 NMU of uw-imap
Dear maintainer of uw-imap, Recently, I sent you a notice announcing my intent to upload a NMU of your package to fix its pending l10n issues. You either agreed for this NMU or did not respond to my notices. I will now upload this NMU to DELAYED/0-DAY (which means an immediate upload). The NMU patch is attached to this mail. The NMU changelog is: Source: uw-imap Version: 7:2002edebian1-13.1 Distribution: unstable Urgency: low Maintainer: Christian Perrier [EMAIL PROTECTED] Date: Sun, 18 Feb 2007 19:29:44 +0100 Closes: 364466 398609 407895 409409 Changes: uw-imap (7:2002edebian1-13.1) unstable; urgency=low . * Non-maintainer upload to fix pending l10n issues. * Debconf translations: - Dutch. Closes: #364466 - German. Closes: #398609 - Galician. Closes: #407895 - Portuguese. Closes: #409409 -- diff -Nru uw-imap-2002edebian1.old/debian/changelog uw-imap-2002edebian1/debian/changelog --- uw-imap-2002edebian1.old/debian/changelog 2007-02-18 19:27:42.951487004 +0100 +++ uw-imap-2002edebian1/debian/changelog 2007-02-18 19:30:46.653098180 +0100 @@ -1,3 +1,14 @@ +uw-imap (7:2002edebian1-13.1) unstable; urgency=low + + * Non-maintainer upload to fix pending l10n issues. + * Debconf translations: +- Dutch. Closes: #364466 +- German. Closes: #398609 +- Galician. Closes: #407895 +- Portuguese. Closes: #409409 + + -- Christian Perrier [EMAIL PROTECTED] Sun, 18 Feb 2007 19:29:44 +0100 + uw-imap (7:2002edebian1-13) unstable; urgency=low * Apply patch fixing IPv6 for ipopd. Closes: bug#348369 (thanks to diff -Nru uw-imap-2002edebian1.old/debian/po/de.po uw-imap-2002edebian1/debian/po/de.po --- uw-imap-2002edebian1.old/debian/po/de.po 1970-01-01 01:00:00.0 +0100 +++ uw-imap-2002edebian1/debian/po/de.po 2007-02-18 19:30:57.809196026 +0100 @@ -0,0 +1,147 @@ +# translation of po-debconf template to German +# +#Translators, if you are not familiar with the PO format, gettext +#documentation is worth reading, especially sections dedicated to +#this format, e.g. by running: +# info -n '(gettext)PO Files' +# info -n '(gettext)Header Entry' +#Some information specific to po-debconf are available at +#/usr/share/doc/po-debconf/README-trans +# or http://www.debian.org/intl/l10n/po-debconf/README-trans# +#Developers do not need to manually edit POT or PO files. +# +# Matthias Julius [EMAIL PROTECTED], 2006. +msgid +msgstr +Project-Id-Version: uw-imap 7:2002edebian1-13\n +Report-Msgid-Bugs-To: \n +POT-Creation-Date: 2005-03-31 16:55+0200\n +PO-Revision-Date: 2006-11-13 22:16-0500\n +Last-Translator: Matthias Julius [EMAIL PROTECTED]\n +Language-Team: German debian-l10n-german@lists.debian.org\n +MIME-Version: 1.0\n +Content-Type: text/plain; charset=UTF-8\n +Content-Transfer-Encoding: 8bit\n +X-Generator: KBabel 1.11.4\n + +#. Type: multiselect +#. Description +#: ../ipopd.templates.master:5 ../uw-imapd.templates.master:5 +msgid Which ports should the server listen on? +msgstr Welche Ports soll der Server verwenden? + +#. Type: multiselect +#. Description +#: ../ipopd.templates.master:5 +msgid pop2 = POP 2 on TCP port 109 with TLS support. This is obsolete. +msgstr +pop2 = POP 2 auf TCP-Port 109 mit TLS-Unterstützung. Dies ist veraltet. + +#. Type: multiselect +#. Description +#: ../ipopd.templates.master:5 +msgid pop3 = POP 3 on TCP port 110 with TLS support. +msgstr pop3 = POP 3 auf TCP-Port 110 mit TLS-Unterstützung. + +#. Type: multiselect +#. Description +#: ../ipopd.templates.master:5 +msgid pop3s = POP 3 on TCP port 995 with SSL support. +msgstr pop3s = POP 3 auf TCP-Port 995 mit SSL-Unterstützung. + +#. Type: multiselect +#. Description +#: ../ipopd.templates.master:5 +msgid If in doubt, choose pop3 and pop3s. +msgstr Falls Sie sich nicht sicher sind, wählen Sie pop3 und pop3s. + +#. Type: boolean +#. Description +#: ../ipopd.templates.master:17 ../uw-imapd.templates.master:18 +msgid Enforce port selection? +msgstr Port-Auswahl erzwingen? + +#. Type: boolean +#. Description +#: ../ipopd.templates.master:17 ../uw-imapd.templates.master:18 +msgid +The ports selected for enabling may be overridden by locally configured +services. By default the port selection is respected only on initial +installs, and is ignored on later reconfiguration. +msgstr +Die Ports, die zur Aktivierung ausgewählt wurden, können von lokal +konfigurierten Diensten überschrieben werden. In der Voreinstellung wird die +Port-Auswahl nur bei der ersten Installation beachtet und bei einer späteren +erneuten Konfiguration ignoriert. + +#. Type: boolean +#. Description +#: ../ipopd.templates.master:17 ../uw-imapd.templates.master:18 +msgid +Do you want to ignore possible local tweaks and always use selected ports? +msgstr +Wollen Sie mögliche lokale Anpassungen ignorieren und immer die ausgewählten +Ports verwenden? + +#. Type: boolean +#. Description +#: ../libc-client__VER__.templates.in.master:4 +msgid
Bug#403323: [Jin-Hwan Cho] Re: dvipdfm(x) crashes in some timezones
---BeginMessage--- On Feb 15, 2007, at 10:43 PM, Frank Küster wrote: Dear dvipdfmx developers, dear dvipdfmx maintainer in Debian, in the last weeks, we found that dvipdfm(x) would segfault when launched in timezones with half-hour offset to UTC, and Mark Wicks wrote a patch. It would be nice if this could be applied to dvipdfmx, too. The topic had been discussed since Sep. 2005. The history of the patch (for dvidpfmx not dvipdfm) can be found at http://cvs.ktug.or.kr/viewcvs/dvipdfmx/src/pdfdoc.c?view=log But the CVS tag was not applied until the version 20061211. Recently (Dec 2006), while discussing TeXLive 2007, the file was updated again. I hope the maintainer in Debian would use the recent CVS code. Best, ChoF. ---End Message--- -- Dr. Frank Küster Single Molecule Spectroscopy, Protein Folding @ Inst. f. Biochemie, Univ. Zürich Debian Developer (teTeX/TeXLive)
Bug#356202: Patch for the 0.30.1-2.1 NMU of gom
Dear maintainer of gom, Recently, I sent you a notice announcing my intent to upload a NMU of your package to fix its pending l10n issues. You either agreed for this NMU or did not respond to my notices. I will now upload this NMU to DELAYED/0-DAY (which means an immediate upload). The NMU patch is attached to this mail. The NMU changelog is: Source: gom Version: 0.30.1-2.1 Distribution: unstable Urgency: low Maintainer: Christian Perrier [EMAIL PROTECTED] Date: Mon, 19 Feb 2007 18:08:41 +0100 Closes: 356202 411184 411189 411212 411221 411229 411241 411461 411518 Changes: gom (0.30.1-2.1) unstable; urgency=low . * Non-maintainer upload to fix pending debconf issues. * Switch to po-debconf for debconf templates. Closes: #356202 * Rewrite the debconf templates to comply with the Developer's Reference recommendations * Debconf translations: - French - Galician. Closes: #411189 - Portuguese. Closes: #411184 - Tamil. Closes: #411212 - Czech. Closes: #411221 - Swedish. Closes: #411229 - Russian. Closes: #411241 - Basque. Closes: 411461 - Romanian. Closes: #411518 -- diff -Nru gom-0.30.1.old/debian/changelog gom-0.30.1/debian/changelog --- gom-0.30.1.old/debian/changelog 2007-02-16 06:04:14.745815144 +0100 +++ gom-0.30.1/debian/changelog 2007-02-19 18:09:07.515991460 +0100 @@ -1,3 +1,22 @@ +gom (0.30.1-2.1) unstable; urgency=low + + * Non-maintainer upload to fix pending debconf issues. + * Switch to po-debconf for debconf templates. Closes: #356202 + * Rewrite the debconf templates to comply with the Developer's Reference +recommendations + * Debconf translations: +- French +- Galician. Closes: #411189 +- Portuguese. Closes: #411184 +- Tamil. Closes: #411212 +- Czech. Closes: #411221 +- Swedish. Closes: #411229 +- Russian. Closes: #411241 +- Basque. Closes: 411461 +- Romanian. Closes: #411518 + + -- Christian Perrier [EMAIL PROTECTED] Mon, 19 Feb 2007 18:08:41 +0100 + gom (0.30.1-2) unstable; urgency=low * postrm|inst: Check for update-modules before calling. diff -Nru gom-0.30.1.old/debian/control gom-0.30.1/debian/control --- gom-0.30.1.old/debian/control 2007-02-16 06:04:14.745815144 +0100 +++ gom-0.30.1/debian/control 2007-02-16 07:25:24.183082977 +0100 @@ -3,7 +3,7 @@ Priority: optional Maintainer: Stephan A Suerken [EMAIL PROTECTED] Standards-Version: 3.6.2 -Build-Depends: debhelper (=4.0.0), libncurses5-dev +Build-Depends: debhelper (=4.1.16), libncurses5-dev, po-debconf Package: gom Architecture: any diff -Nru gom-0.30.1.old/debian/gom.templates gom-0.30.1/debian/gom.templates --- gom-0.30.1.old/debian/gom.templates 2007-02-16 06:04:14.745815144 +0100 +++ gom-0.30.1/debian/gom.templates 2007-02-16 18:44:33.890026527 +0100 @@ -1,17 +1,18 @@ Template: gom/auto_init Type: boolean Default: false -Description: Initialize mixer on system startup? - If this is on, /etc/init.d/gom start (on system startup, or if run - manually) will set mixer settings to your saved configuration. +_Description: Initialize mixer on system startup? + If you choose this option, /etc/init.d/gom start (on system + startup, or if run manually) will set mixer settings to your saved + configuration. . You may use upstream's gomconfig script as root later to fine-tune - settings. + the settings. Template: gom/valid_sound_devices Type: string Default: sound alsa -Description: Space-separated list of valid sound devices? +Description: Space-separated list of valid sound devices: If none of these device names exists in /proc/devices, /etc/init.d/gom will exit silently (so it does not produce errors if the system has no sound at all). @@ -22,11 +23,14 @@ Template: gom/purge_etc_gom Type: boolean Default: true -Description: Remove /etc/gom completely? - Seems the directory contains additional local customization files. +_Description: Remove /etc/gom completely? + The /etc/gom directory seems to contain additional local + customization files. Please choose whether you want to remove it + entirely. Template: gom/remove_obsolete_rcboot Type: boolean Default: true -Description: Remove obsoleted /etc/rc.boot/gom? - The file is obsoleted in Debian but might contain local customizations. +_Description: Remove obsoleted /etc/rc.boot/gom? + The /etc/rc.boot/gom file is obsoleted but might contain local + customizations. diff -Nru gom-0.30.1.old/debian/po/cs.po gom-0.30.1/debian/po/cs.po --- gom-0.30.1.old/debian/po/cs.po 1970-01-01 01:00:00.0 +0100 +++ gom-0.30.1/debian/po/cs.po 2007-02-17 14:28:50.020423000 +0100 @@ -0,0 +1,73 @@ +# SOME DESCRIPTIVE TITLE. +# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER +# This file is distributed under the same license as the PACKAGE package. +# FIRST AUTHOR [EMAIL PROTECTED], YEAR. +# +msgid +msgstr +Project-Id-Version: gom\n +Report-Msgid-Bugs-To: [EMAIL PROTECTED] +POT-Creation-Date: 2007-02-16 18:44+0100\n +PO-Revision-Date: 2007-02-16
Bug#393207: Patch for the 1.2-11.1 NMU of portsentry
Dear maintainer of portsentry, Recently, I sent you a notice announcing my intent to upload a NMU of your package to fix its pending l10n issues. You either agreed for this NMU or did not respond to my notices. I will now upload this NMU to DELAYED/0-DAY (which means an immediate upload). The NMU patch is attached to this mail. The NMU changelog is: Source: portsentry Version: 1.2-11.1 Distribution: unstable Urgency: low Maintainer: Christian Perrier [EMAIL PROTECTED] Date: Wed, 21 Feb 2007 07:41:46 +0100 Closes: 411333 411335 411342 411384 411389 411412 411464 411539 411570 411750 Changes: portsentry (1.2-11.1) unstable; urgency=low . * Non-maintainer upload to fix pending l10n issues. * Debconf translations: - German. Closes: #411333 - Swedish. Closes: #411335 - Czech. Closes: #411342 - Galician. Closes: #411384 - Japanese. Closes: #411389 - Italian. Closes: 411412 - Basque. Closes: #411464 - Russian. Closes: #411539 - French. Closes: #411570 - Catalan. Closes: #411750 -- diff -Nru portsentry-1.2.old/debian/changelog portsentry-1.2/debian/changelog --- portsentry-1.2.old/debian/changelog 2007-02-18 10:46:59.217460273 +0100 +++ portsentry-1.2/debian/changelog 2007-02-21 07:42:05.605618979 +0100 @@ -1,3 +1,20 @@ +portsentry (1.2-11.1) unstable; urgency=low + + * Non-maintainer upload to fix pending l10n issues. + * Debconf translations: +- German. Closes: #411333 +- Swedish. Closes: #411335 +- Czech. Closes: #411342 +- Galician. Closes: #411384 +- Japanese. Closes: #411389 +- Italian. Closes: 411412 +- Basque. Closes: #411464 +- Russian. Closes: #411539 +- French. Closes: #411570 +- Catalan. Closes: #411750 + + -- Christian Perrier [EMAIL PROTECTED] Wed, 21 Feb 2007 07:41:46 +0100 + portsentry (1.2-11) unstable; urgency=low * Updated German (de.po) translation. (closes: #396090) diff -Nru portsentry-1.2.old/debian/po/ca.po portsentry-1.2/debian/po/ca.po --- portsentry-1.2.old/debian/po/ca.po 2007-02-18 10:46:59.225460344 +0100 +++ portsentry-1.2/debian/po/ca.po 2007-02-21 07:41:39.869443170 +0100 @@ -1,34 +1,28 @@ # -#Translators, if you are not familiar with the PO format, gettext -#documentation is worth reading, especially sections dedicated to -#this format, e.g. by running: -# info -n '(gettext)PO Files' -# info -n '(gettext)Header Entry' +# Catalan translation for portsentry package. +# Copyright (C) 2007 Bruno Barrera C. +# This file is distributed under the same license as the portsentry +# package. # -#Some information specific to po-debconf are available at -#/usr/share/doc/po-debconf/README-trans -# or http://www.debian.org/intl/l10n/po-debconf/README-trans +# Jordà Polo [EMAIL PROTECTED], 2007. # -#Developers do not need to manually edit POT or PO files. -# -#, fuzzy msgid msgstr -Project-Id-Version: PACKAGE VERSION\n +Project-Id-Version: 1.2-11\n Report-Msgid-Bugs-To: [EMAIL PROTECTED] POT-Creation-Date: 2006-10-29 19:45-0300\n -PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n -Last-Translator: FULL NAME [EMAIL PROTECTED]\n -Language-Team: LANGUAGE [EMAIL PROTECTED]\n +PO-Revision-Date: 2007-02-20 19:43+0100\n +Last-Translator: Jordà Polo [EMAIL PROTECTED]\n +Language-Team: Català debian-l10n-catalan@lists.debian.org\n MIME-Version: 1.0\n -Content-Type: text/plain; charset=ISO-8859-15\n +Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n #. Type: note #. Description #: ../templates:1001 msgid PortSentry does not block anything by default. -msgstr PortSentry no bloquejarà res per defecte. +msgstr PortSentry no bloqueja res per defecte. #. Type: note #. Description @@ -38,22 +32,22 @@ attackers. It only dumps messages into /var/log/syslog. To change this edit / etc/portsentry/portsentry.conf. msgstr -Si us plau noteu que per defecte PortSentry no fa cap acció contra dels -atacs en potència. Aquest sols veu els missatges en el /var/log/syslog. Per -a canviar això editeu el /etc/portsentry/portsentry.conf. +Si us plau, fixeu-vos que amb els valors predeterminats PortSentry no +realitza cap acció contra atacs potencials. PortSentry només escriu +missatges de registre a /var/log/syslog. Per a canviar això, editeu /etc/ +portsentry/portsentry.conf. #. Type: note #. Description #: ../templates:1001 -#, fuzzy msgid You may also want to check:\n /etc/default/portsentry (daemon startup options) and\n /etc/portsentry/portsentry.ignore.static (hosts/interfaces to ignore) msgstr - Pot ser també vulgueu comprobar:\n - /etc/portsentry/startup.conf (opcions de càrrega) i\n - /etc/portsentry/portsentry.ignore.static (llocs/interfícies a ignorar) + Tal vegada us interessi comprovar també:\n + /etc/default/portsentry (opcions d'inici del dimoni) i\n + /etc/portsentry/portsentry.ignore.static (mà quines/interfÃcies a ignorar) #. Type: note #. Description @@ -61,19
Bug#400144: Patch for the 0.5.1-4.1 NMU of esmtp
Dear maintainer of esmtp, Recently, I sent you a notice announcing my intent to upload a NMU of your package to fix its pending l10n issues. You either agreed for this NMU or did not respond to my notices. I will now upload this NMU to DELAYED/0-DAY (which means an immediate upload). The NMU patch is attached to this mail. The NMU changelog is: Source: esmtp Version: 0.5.1-4.1 Distribution: unstable Urgency: low Maintainer: Christian Perrier [EMAIL PROTECTED] Date: Mon, 19 Feb 2007 09:10:54 +0100 Closes: 400144 402311 409214 Changes: esmtp (0.5.1-4.1) unstable; urgency=low . * Non-maintainer upload to fix pending l10n issues. * Debconf translations: - Spanish. Closes: #402311 - Japanese. Closes: #400144 - Portuguese. Closes: #409214 -- diff -Nru esmtp-0.5.1.old/debian/changelog esmtp-0.5.1/debian/changelog --- esmtp-0.5.1.old/debian/changelog 2007-02-19 09:07:16.037668088 +0100 +++ esmtp-0.5.1/debian/changelog 2007-02-19 09:11:25.599824687 +0100 @@ -1,3 +1,13 @@ +esmtp (0.5.1-4.1) unstable; urgency=low + + * Non-maintainer upload to fix pending l10n issues. + * Debconf translations: +- Spanish. Closes: #402311 +- Japanese. Closes: #400144 +- Portuguese. Closes: #409214 + + -- Christian Perrier [EMAIL PROTECTED] Mon, 19 Feb 2007 09:10:54 +0100 + esmtp (0.5.1-4) unstable; urgency=low * Update swedish debconf translation, by Daniel Nylander (closes: #340408). diff -Nru esmtp-0.5.1.old/debian/po/es.po esmtp-0.5.1/debian/po/es.po --- esmtp-0.5.1.old/debian/po/es.po 1970-01-01 01:00:00.0 +0100 +++ esmtp-0.5.1/debian/po/es.po 2007-02-19 09:08:57.362544432 +0100 @@ -0,0 +1,167 @@ +# esmtp po-debconf translation to Spanish +# Copyright (C) 2005 Software in the Public Interest +# This file is distributed under the same license as the esmtp package. +# +# Changes: +# - Initial translation +# César Gómez Martín [EMAIL PROTECTED] +# +# Traductores, si no conoce el formato PO, merece la pena leer la +# documentación de gettext, especialmente las secciones dedicadas a este +# formato, por ejemplo ejecutando: +# info -n '(gettext)PO Files' +# info -n '(gettext)Header Entry' +# Equipo de traducción al español, por favor, lean antes de traducir +# los siguientes documentos: +# +# - El proyecto de traducción de Debian al español +#http://www.debian.org/intl/spanish/ +#especialmente las notas de traducción en +#http://www.debian.org/intl/spanish/notas +# +# - La guía de traducción de po's de debconf: +#/usr/share/doc/po-debconf/README-trans +#o http://www.debian.org/intl/l10n/po-debconf/README-trans +# +msgid +msgstr +Project-Id-Version: esmtp\n +Report-Msgid-Bugs-To: [EMAIL PROTECTED] +POT-Creation-Date: 2005-11-09 15:15+\n +PO-Revision-Date: 2006-12-09 14:08+0100\n +Last-Translator: César Gómez Martín [EMAIL PROTECTED]\n +Language-Team: Debian l10n spanish debian-l10n-spanish@lists.debian.org\n +MIME-Version: 1.0\n +Content-Type: text/plain; charset=utf-8\n +Content-Transfer-Encoding: 8bit\n + +#. Type: boolean +#. Description +#: ../templates:4 +msgid Automatically overwrite configuration files? +msgstr +¿Desea sobreescribir los ficheros de configuración de forma automática? + +#. Type: boolean +#. Description +#: ../templates:4 +msgid +The mail configuration file /etc/esmtprc can be automatically updated on +each upgrade with the information supplied to the debconf database. If you +do not want this to happen (i.e., you want to maintain control of this file +yourself) then unset this option to prevent the program touching this file. +msgstr +El fichero de configuración de correo /etc/esmtprc se puede actualizar +automáticamente en cada actualización con la información que se le +proporciona a la base de datos debconf. Si no quiere que esto ocurra (p.e., +quiere mantener el control de este fichero usted mismo) entonces desactive +esta opción para no permitir que el programa toque este fichero + +#. Type: string +#. Description +#: ../templates:13 +msgid SMTP server hostname +msgstr Nombre del servidor SMTP + +#. Type: string +#. Description +#: ../templates:18 +msgid SMTP server port number +msgstr Número de puerto del servidor SMTP + +#. Type: string +#. Description +#: ../templates:22 +msgid Authentication username +msgstr Nombre de usuario a autenticar + +#. Type: string +#. Description +#: ../templates:22 +msgid +This is the username to be given to the mailhub if authentication is +required by the SMTP server. +msgstr +Este es el nombre de usuario que se le proporciona al concentrador de correo +si el servidor SMTP requiere autenticación. + +#. Type: string +#. Description +#: ../templates:22 +msgid +Do NOT set the username and password on the system configuration file unless +you are the sole user of this machine. Esmtp is not run with suid +privileges therefore the system configuration file must be readable by +everyone. If your SMTP server requires authorization and you
Bug#411822: snort: [INTL:ru] Initial Russian debconf templates translation
Package: snort Severity: wishlist Tags: patch l10n Attached Russian debconf templates translation snort_2.3.3-12_ru.po.gz Description: Binary data
Bug#380662: Patch for the 1.31-25.2 NMU of xbanner
Dear maintainer of xbanner, Recently, I sent you a notice announcing my intent to upload a NMU of your package to fix its pending l10n issues. You either agreed for this NMU or did not respond to my notices. I will now upload this NMU to DELAYED/0-DAY (which means an immediate upload). The NMU patch is attached to this mail. The NMU changelog is: Source: xbanner Version: 1.31-25.2 Distribution: unstable Urgency: low Maintainer: Christian Perrier [EMAIL PROTECTED] Date: Sat, 17 Feb 2007 18:15:59 +0100 Closes: 380662 Changes: xbanner (1.31-25.2) unstable; urgency=low . * Non-maintainer upload to fix pending l10n bugs. * Debconf translations: - Russian. Closes: #380662 -- diff -Nru xbanner-1.31.old/debian/changelog xbanner-1.31/debian/changelog --- xbanner-1.31.old/debian/changelog 2007-02-17 18:13:47.322802768 +0100 +++ xbanner-1.31/debian/changelog 2007-02-17 18:16:39.508312941 +0100 @@ -1,3 +1,11 @@ +xbanner (1.31-25.2) unstable; urgency=low + + * Non-maintainer upload to fix pending l10n bugs. + * Debconf translations: +- Russian. Closes: #380662 + + -- Christian Perrier [EMAIL PROTECTED] Sat, 17 Feb 2007 18:15:59 +0100 + xbanner (1.31-25.1) unstable; urgency=low * Non-maintainer upload. diff -Nru xbanner-1.31.old/debian/po/ru.po xbanner-1.31/debian/po/ru.po --- xbanner-1.31.old/debian/po/ru.po 1970-01-01 01:00:00.0 +0100 +++ xbanner-1.31/debian/po/ru.po 2007-02-17 18:14:52.735376000 +0100 @@ -0,0 +1,58 @@ +# translation of xbanner_1.31-25.1_debconf_ru.po to Russian +# +#Translators, if you are not familiar with the PO format, gettext +#documentation is worth reading, especially sections dedicated to +#this format, e.g. by running: +# info -n '(gettext)PO Files' +# info -n '(gettext)Header Entry' +#Some information specific to po-debconf are available at +#/usr/share/doc/po-debconf/README-trans +# or http://www.debian.org/intl/l10n/po-debconf/README-trans# +#Developers do not need to manually edit POT or PO files. +# Yuri Kozlov [EMAIL PROTECTED], 2006. +# +msgid +msgstr +Project-Id-Version: xbanner_1.31-25.1\n +Report-Msgid-Bugs-To: \n +POT-Creation-Date: 2005-09-28 20:20-0300\n +PO-Revision-Date: 2006-07-31 21:54+0300\n +Last-Translator: Yuri Kozlov [EMAIL PROTECTED]\n +Language-Team: Russian debian-l10n-russian@lists.debian.org\n +MIME-Version: 1.0\n +Content-Type: text/plain; charset=UTF-8\n +Content-Transfer-Encoding: 8bit\n +X-Generator: KBabel 1.9.1\n + +#. Type: note +#. Description +#: ../templates:3 +msgid Execute 'xbannerconfig remove' before removing package +msgstr Запуск 'xbannerconfig remove' перед удалением пакета + +#. Type: note +#. Description +#: ../templates:3 +msgid +You are attempting to remove the xbanner package. However, you have altered +your XDM environment to invoke xbanner. The XDM environment will cease +working, if it contains references to xbanner, once the xbanner package has +been removed. You must delete all references to xbanner files before you +can remove the xbanner package. +msgstr +Вы намереваетесь удалить пакет xbanner. Однако вы изменили своё +окружение XDM для вызова xbanner. Окружение XDM перестанет +работать, если будет содержать ссылку на xbanner при удалённом +пакете xbanner. Вы должны удалить все ссылки на файлы xbanner +перед тем как сможете удалить пакет xbanner. + +#. Type: note +#. Description +#: ../templates:3 +msgid +To do this, please execute 'xbannerconfig remove' as root before the package +removal occurs. Please see xbannerconfig(8) for more information. +msgstr +Для этого запустите 'xbannerconfig remove' с правами суперпользователя +перед удалением пакета. Подробней смотрите в xbannerconfig(8). + signature.asc Description: Digital signature
Bug#411243: Patch for the 1.2b-2.1 NMU of php4-idn
Dear maintainer of php4-idn, Recently, I sent you a notice announcing my intent to upload a NMU of your package to fix its pending l10n issues. You either agreed for this NMU or did not respond to my notices. I will now upload this NMU to DELAYED/0-DAY (which means an immediate upload). The NMU patch is attached to this mail. The NMU changelog is: Source: php4-idn Version: 1.2b-2.1 Distribution: unstable Urgency: low Maintainer: Christian Perrier [EMAIL PROTECTED] Date: Mon, 19 Feb 2007 07:50:41 +0100 Closes: 411243 Changes: php4-idn (1.2b-2.1) unstable; urgency=low . * Non-maintainer upload to fix pending l10n issues. * Add the debian/po directory so that debconf i18n really works Translations stolen from php-kadm5 Closes: #411243 -- diff -Nru php4-idn-1.2b.old/debian/changelog php4-idn-1.2b/debian/changelog --- php4-idn-1.2b.old/debian/changelog 2007-02-18 22:40:59.961199900 +0100 +++ php4-idn-1.2b/debian/changelog 2007-02-19 07:52:29.335414029 +0100 @@ -1,3 +1,12 @@ +php4-idn (1.2b-2.1) unstable; urgency=low + + * Non-maintainer upload to fix pending l10n issues. + * Add the debian/po directory so that debconf i18n really works +Translations stolen from php-kadm5 +Closes: #411243 + + -- Christian Perrier [EMAIL PROTECTED] Mon, 19 Feb 2007 07:50:41 +0100 + php4-idn (1.2b-2) unstable; urgency=low * templates, config, postinst, postrm and prerm from php4-kadm5. diff -Nru php4-idn-1.2b.old/debian/control php4-idn-1.2b/debian/control --- php4-idn-1.2b.old/debian/control 2007-02-18 22:40:59.965199935 +0100 +++ php4-idn-1.2b/debian/control 2007-02-18 22:52:27.011225751 +0100 @@ -2,7 +2,7 @@ Section: web Priority: optional Maintainer: Turbo Fredriksson [EMAIL PROTECTED] -Build-Depends: debhelper ( 4.0.0), binutils, php4-dev (= 4:4.3.10-10), php5-dev, libidn11-dev | libidn9-dev (= 0.2.1) +Build-Depends: debhelper ( 4.0.0), binutils, php4-dev (= 4:4.3.10-10), php5-dev, libidn11-dev | libidn9-dev (= 0.2.1), po-debconf Standards-Version: 3.5.8 Package: php4-idn diff -Nru php4-idn-1.2b.old/debian/po/ca.po php4-idn-1.2b/debian/po/ca.po --- php4-idn-1.2b.old/debian/po/ca.po 1970-01-01 01:00:00.0 +0100 +++ php4-idn-1.2b/debian/po/ca.po 2007-02-18 22:48:28.777136291 +0100 @@ -0,0 +1,52 @@ +# php4-ps (debconf) translation to Catalan. +# Copyright (C) 2004 Free Software Foundation, Inc. +# Aleix Badia i Bosch [EMAIL PROTECTED], 2004 +# +msgid +msgstr +Project-Id-Version: php4-ps:1.3.1-3\n +Report-Msgid-Bugs-To: [EMAIL PROTECTED] +POT-Creation-Date: 2007-02-18 22:48+0100\n +PO-Revision-Date: 2004-01-31 19:46GMT\n +Last-Translator: Aleix Badia i Bosch [EMAIL PROTECTED]\n +Language-Team: Debian L10n Catalan debian-l10n-catalan@lists.debian.org\n +MIME-Version: 1.0\n +Content-Type: text/plain; charset=UTF-8\n +Content-Transfer-Encoding: 8bit\n + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid Should ${extname} be added to /etc/php4/${sapiconfig}/php.ini? +msgstr Voleu afegir l'extensió ${extname} a /etc/php4/${sapiconfig}/php.ini? + +#. Type: boolean +#. Description +#: ../templates:1001 +msgid +You are installing ${extname} support for php4, and it is not yet enabled in +the configuration for the ${sapiconfig} SAPI. Do you want this extension to +be enabled now? +msgstr +Esteu instal·lant el suport de l'extensió ${extname} per a php4 i encara no +està habilitat a la configuració del SAPI ${sapiconfig}. Voleu habilitar +aquesta extensió? + +#. Type: boolean +#. Description +#: ../templates:2001 +msgid Should ${extname} be removed from /etc/php4/${sapiconfig}/php.ini? +msgstr +Voleu suprimir l'extensió ${extname} de /etc/php4/${sapiconfig}/php.ini? + +#. Type: boolean +#. Description +#: ../templates:2001 +msgid +You are removing ${extname} support for php4, but it is still enabled in the +configuration for the ${sapiconfig} SAPI. Leaving this in place will +probably cause problems when trying to use PHP. +msgstr +Esteu suprimint el suport de l'extensió ${extname} per a php4 però continua +habilitat a la configuració del SAPI ${sapiconfig}. Si ho deixeu activat pot +provocar problemes a l'intentar utilitzar el php. diff -Nru php4-idn-1.2b.old/debian/po/cs.po php4-idn-1.2b/debian/po/cs.po --- php4-idn-1.2b.old/debian/po/cs.po 1970-01-01 01:00:00.0 +0100 +++ php4-idn-1.2b/debian/po/cs.po 2007-02-18 22:48:28.821136677 +0100 @@ -0,0 +1,59 @@ +# +#Translators, if you are not familiar with the PO format, gettext +#documentation is worth reading, especially sections dedicated to +#this format, e.g. by running: +# info -n '(gettext)PO Files' +# info -n '(gettext)Header Entry' +# +#Some information specific to po-debconf are available at +#/usr/share/doc/po-debconf/README-trans +# or http://www.debian.org/intl/l10n/po-debconf/README-trans +# +#Developers do not need to manually edit POT or PO files. +# +msgid +msgstr +Project-Id-Version: php4-ps:1.3.1-3\n
Bug#411821: Upgrade to kicad 0.0.20060829-2 in etch
Package: kicad Version: 0.0.20060829-1 Would it be possible to upgrade (update ?) the version of kicad to 0.0.20060829-2 in Etch ? Thanks, Loïc Grenié -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#403323: dvipdfm(x) crashes in some timezones
# I think dvipdfmx should not be released non-working in some parts of # the world severity 403323 serious tags 403323 patch thanks Jin-Hwan Cho [EMAIL PROTECTED] wrote: On Feb 15, 2007, at 10:43 PM, Frank Küster wrote: Dear dvipdfmx developers, dear dvipdfmx maintainer in Debian, in the last weeks, we found that dvipdfm(x) would segfault when launched in timezones with half-hour offset to UTC, and Mark Wicks wrote a patch. It would be nice if this could be applied to dvipdfmx, too. The topic had been discussed since Sep. 2005. The history of the patch (for dvidpfmx not dvipdfm) can be found at http://cvs.ktug.or.kr/viewcvs/dvipdfmx/src/pdfdoc.c?view=log But the CVS tag was not applied until the version 20061211. Recently (Dec 2006), while discussing TeXLive 2007, the file was updated again. Ah, that's good. So TeXlive has a corrected version. Hm, I looked at the code and compared http://cvs.ktug.or.kr/viewcvs/dvipdfmx/src/pdfdoc.c?r1=1.42r2=1.45 to http://svn.debian.org/wsvn/debian-tex/texlive/trunk/dpatch/texlive-bin/61_dvipdfm_timezone.dpatch?op=filerev=0sc=0 The differences are: - different hierarchies of ifdef's; in dvipdfm, bd_time-tm_gmtoff takes precedence over timezone, in dvipdfmx it's the other way round. Maybe not very important - In the sprintf format string, you use %03ld and %02ld, which seems correct, whereas dvipdfm misses the 'l' length modifier. Hm, could this lead to errors? It seems to work... - To me, the computation of the timezone information in date_string looks wrong in dvipdfmx. Ah, no, it is correct. But (tz_offset/60) % 60 is easier to understand than (timezone % 3600) % 60 I hope the maintainer in Debian would use the recent CVS code. Umh, no. Debian is in a freeze, we won't take new upstream versions at this time. I think the Yu Guanghui, the Debian maintainer for dvipdfmx, should take the patch used in dvipdfmx (this is the context diff format: http://cvs.ktug.or.kr/viewcvs/dvipdfmx/src/pdfdoc.c?r1=1.42r2=1.45diff_format=c ) and upload targetted at etch. Or do you want me to do an NMU? Regards, Frank -- Dr. Frank Küster Single Molecule Spectroscopy, Protein Folding @ Inst. f. Biochemie, Univ. Zürich Debian Developer (teTeX/TeXLive)
Bug#405906: Patch for the 1.2.1-6.1 NMU of openslp
Dear maintainer of openslp, Recently, I sent you a notice announcing my intent to upload a NMU of your package to fix its pending l10n issues. You either agreed for this NMU or did not respond to my notices. I will now upload this NMU to DELAYED/0-DAY (which means an immediate upload). The NMU patch is attached to this mail. The NMU changelog is: Source: openslp Version: 1.2.1-6.1 Distribution: unstable Urgency: low Maintainer: Christian Perrier [EMAIL PROTECTED] Date: Sun, 18 Feb 2007 18:54:11 +0100 Closes: 388919 405906 407271 408184 Changes: openslp (1.2.1-6.1) unstable; urgency=low . * Non-maintainer upload to fix pending l10n issues. * Turn the debconf notes into error type. Closes: #388919 * Debconf translations: - Portuguese. Closes: #408184 - Russian. Closes: #405906 - Galician. Closes: #407271 -- diff -Nru openslp-1.2.1.old/debian/changelog openslp-1.2.1/debian/changelog --- openslp-1.2.1.old/debian/changelog 2007-02-18 18:28:35.964377750 +0100 +++ openslp-1.2.1/debian/changelog 2007-02-18 18:56:16.734943727 +0100 @@ -1,3 +1,14 @@ +openslp (1.2.1-6.1) unstable; urgency=low + + * Non-maintainer upload to fix pending l10n issues. + * Turn the debconf notes into error type. Closes: #388919 + * Debconf translations: +- Portuguese. Closes: #408184 +- Russian. Closes: #405906 +- Galician. Closes: #407271 + + -- Christian Perrier [EMAIL PROTECTED] Sun, 18 Feb 2007 18:54:11 +0100 + openslp (1.2.1-6) unstable; urgency=low * Remove debconf dependency in postrm. (Closes: #387951). diff -Nru openslp-1.2.1.old/debian/libslp1.templates openslp-1.2.1/debian/libslp1.templates --- openslp-1.2.1.old/debian/libslp1.templates 2007-02-18 18:28:35.964377750 +0100 +++ openslp-1.2.1/debian/libslp1.templates 2007-02-18 18:54:07.053806344 +0100 @@ -1,5 +1,5 @@ Template: libslp1/multicast -Type: note +Type: error _Description: To reduce network traffic use a IP multicast enabled kernel The kernel version that you are currently running does not appear to support IP multicast. OpenSLP will continue to work even without multicast @@ -8,7 +8,7 @@ enabled kernel. Template: libslp1/multicast-route -Type: note +Type: error _Description: Please configure a multicast route in /etc/network/interfaces You don't seem to have a multicast route configured. OpenSLP can take advantage of multicast packets and reduce traffic on your network. You can diff -Nru openslp-1.2.1.old/debian/po/gl.po openslp-1.2.1/debian/po/gl.po --- openslp-1.2.1.old/debian/po/gl.po 1970-01-01 01:00:00.0 +0100 +++ openslp-1.2.1/debian/po/gl.po 2007-02-18 18:56:28.435046344 +0100 @@ -0,0 +1,63 @@ +# Galician translation of openslp's debconf templates +# This file is distributed under the same license as the openslp package. +# Jacobo Tarrio [EMAIL PROTECTED], 2007. +# +msgid +msgstr +Project-Id-Version: openslp\n +Report-Msgid-Bugs-To: \n +POT-Creation-Date: 2003-04-06 17:12-0300\n +PO-Revision-Date: 2007-01-17 10:56+0100\n +Last-Translator: Jacobo Tarrio [EMAIL PROTECTED]\n +Language-Team: Galician [EMAIL PROTECTED]\n +MIME-Version: 1.0\n +Content-Type: text/plain; charset=UTF-8\n +Content-Transfer-Encoding: 8bit\n + +#. Description +#: ../libslp1.templates:3 +msgid To reduce network traffic use a IP multicast enabled kernel +msgstr Empregue un núcleo con multicast IP para reducir o tráfico na rede + +#. Description +#: ../libslp1.templates:3 +msgid +The kernel version that you are currently running does not appear to support +IP multicast. OpenSLP will continue to work even without multicast support +in the kernel by using broadcasts. However, broadcasts are less efficient on +the network, so please consider upgrading to a multicast enabled kernel. +msgstr +Semella que a versión do núcleo que está a executar non soporta multicast +IP. OpenSLP ha seguir funcionando sen soporte de multicast no núcleo +empregando broadcasts. Nembargantes, os broadcasts son menos eficientes coa +rede, así que pense en se actualizar a un núcleo con multicast activado. + +#. Description +#: ../libslp1.templates:12 +msgid Please configure a multicast route in /etc/network/interfaces +msgstr Configure unha ruta multicast en /etc/network/interfaces + +#. Description +#: ../libslp1.templates:12 +msgid +You don't seem to have a multicast route configured. OpenSLP can take +advantage of multicast packets and reduce traffic on your network. You can +setup a multicast route automatically on system startup by adding the +following commands to the \interface\ line(s) in your /etc/network/ +interfaces file. +msgstr +Semella que non ten unha ruta multicast configurada. OpenSLP pode aproveitar +os paquetes multicast e reducir o tráfico na súa rede. Pode configurar +automaticamente unha ruta multicast ao iniciar o sistema engandido as +seguintes ordes á(s) liña(s) \interface\ do seu ficheiro /etc/network/ +interfaces. + +#. Description +#: ../libslp1.templates:12 +msgid \up route add -net
Bug#411627: comix: Installing with --no-mime still includes gnome-thumbnailer gconf entries
Alex Malinovich [EMAIL PROTECTED] writes: Package: comix Version: 3.6.2-2 Severity: normal The current installation of comicthumb installed gconf keys for a thumbnailer referring to comicthumb which is not included in the package. The Debian package currently uses the --no-mime option to install.py to get any necessary files for the package to be built. This causes comicthumb to be left out of the installation. While this may be a good thing since it prevents any potential Nautilus dependency, the comicbook.schemas file which is installed still includes the comicthumb references. Either comicthumb should be included as part of the package (or be made into a separate package) or the comicbook.schemas file (in mime/) should be edited to remove any references to the comicthumb program. Hello, I think it should be more a upstream minor bug than a packaging one, I think I've no good idea to deal it graceful. Could upstream to tune the installation script a little? -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (990, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-1-amd64 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Versions of packages comix depends on: ii gconf22.16.0-3 GNOME configuration database syste ii python2.4.4-2An interactive high-level object-o ii python-gtk2 2.8.6-8Python bindings for the GTK+ widge ii python-imaging1.1.5-11 Python Imaging Library comix recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#298982: Not just prboom.
I've been researching a (maybe different) segfault in penguin-command. On a hunch, i uninstalled timidity. It behaved exactly like prboom is behaving as you specify. I started it, and then it quit immediately (music starts immediately. No need to fire a gun or anything like that). If I start with nosound, it plays fine, just no sound. If I add a blank /etc/timidity/timidity.cfg file, it starts fine, but with less music (not all of penguin-command's music is midi). My sound card is: $ lspci -v | grep -i audio 00:11.5 Multimedia audio controller: VIA Technologies, \ Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60) It's built in to my Mach Speed Motherboard. I'm fully upgraded for testing (etch). Finally, I think libsdl-mixer1.2/Bug#145045 is a dupe of this. -Brandon -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411135: linux-image-2.6.18-4-sparc64-smp: Unknown symbol execve in module bbc
Are you talking about the patch like the one in http://lists.debian.org/debian-sparc/2007/02/msg00045.html ? this patch seems to work fine... pls check and tell us On 2/21/07, Jurij Smakov [EMAIL PROTECTED] wrote: On Tue, Feb 20, 2007 at 10:22:40AM +, J.J. Green wrote: Finally got the thing compiled, and I can now load/unload the module too -- bug fixed, thanks very much. Unfortunately, when loaded, it spawns a kenvctrld which eats up almost 100% of one the CPUs, so unusable at present. But I've seen a report on the Ubuntu sparc lists with a (1 line) fix for this problem, so I'll have a crack at that now. Hi Jim, Are you talking about the patch like the one in http://lists.debian.org/debian-sparc/2007/02/msg00045.html ? Best regards, -- Jurij Smakov [EMAIL PROTECTED] Key: http://www.wooyd.org/pgpkey/ KeyID: C99E03CC -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411537: texlive-extra-utils: Installs /usr/bin/dvidvi, which is also in package dvidvi
Lionel Elie Mamane [EMAIL PROTECTED] wrote: Which makes me realise that dvidvi depends on tetex to the exclusion of texlive... Pfff... I don't even know why it depends on tetex-bin, to be honest. That is probably because it needs to access fonts, and therefore needs mktexpk and friends. 1) dvidvi does not link to any library (other than libc, of course) Ah, I was confused. Of course, since the output of dvi is just dvi, it doesn't need fonts, as all the other dvi-to-something programs do. I thus conclude that dvidvi cannot execute any executable from tetex-bin, nor access any data from dependencies of tetex-bin (e.g. tetex-base) and hence the package has no reason to depend on them. I uploaded to unstable stripping the dependency. Fine. Should I include an unfreeze request with our request to let the fixed texlive in? Regards, Frank -- Dr. Frank Küster Single Molecule Spectroscopy, Protein Folding @ Inst. f. Biochemie, Univ. Zürich Debian Developer (teTeX/TeXLive)
Bug#411801: nautilus hangs (using CPU) when maximising
Le mercredi 21 février 2007 à 02:12 +0200, Wouter Van Hemel a écrit : Package: nautilus Version: 2.14.3-9 Severity: important [ http://bugzilla.gnome.org/show_bug.cgi?id=410145 ] Nautilus hangs in some cases when maximising the window. I've got a rather normal directory with ~15 small pictures and text files; if I maximise nautilus when it shows that directory, nautilus hangs and doesn't return (at least, not in 15 minutes). The window isn't repainted, either. It doesn't crash, but doesn't seem to return either. I can reproduce this every time. Nautilus was started from a terminal window in KDE. Is it using 100% cpu during this time? I've done a rather unenlightening 'strace' on the process: strace is rarely useful to debug such issues. Instead, please install nautilus-dbg and libgnomevfs2-0-dbg, and run gdb /usr/bin/nautilus. Then, type attach pid_of_locked_process and thread apply all bt. Thanks, -- .''`. : :' : We are debian.org. Lower your prices, surrender your code. `. `' We will add your hardware and software distinctiveness to `-our own. Resistance is futile.
Bug#411657: The update of the zope-common package depend on the removal of the python2.3 and zope2.7 packages
* 2007-02-20 12:34, Frederic MASSOT wrote: Package: zope-common Version: 0.5.21 Severity: normal Hi, The update of the zope-common package (0.5.21 to 0.5.31) depend on the removal of the python2.3 and zope2.7 packages. This update is dangerous on a Zope server with web sites which use Zope 2.7 (Plone 2.0 and Plone 2.1) and Zope 2.9 (Plone 2.5). Hi Frederic, I'm sorry, but I can't understand your bug report. What does the sentence depend on the removal of the python2.3 and zope2.7 packages mean? Could you please post the output of aptitude upgrade / dist-upgrade? I see nothing in the package which conflicts with zope2.3 or zope2.7. Thanks, -- Fabio Tranchitella http://www.kobold.it Free Software Developer and Consultant http://www.tranchitella.it _ 1024D/7F961564, fpr 5465 6E69 E559 6466 BF3D 9F01 2BF8 EE2B 7F96 1564 signature.asc Description: Digital signature
Bug#409349: apcupsd: Generates lots of kernel hid-core error messages
David Härdeman wrote: Tom Wright wrote: Package: apcupsd Version: 3.12.4-2 Severity: critical Justification: breaks unrelated software After the system has been running for a few hours, I get a lot of kernel hid-core.c error messages in /var/log/messages: Were you able to reproduce this with the latest Debian packaged Linux 2.6 kernel? no sorry, i'm still trying but i'm not able. -- 4% fats, 2% cerebral activities
Bug#145045: I think this is a dupe.
If you are experiencing this bug, try the following, as root: mkdir /etc/timidity touch /etc/timidity/timidity.cfg Does penguin-command still segfault? If not, this bug is a dupe of #298982 (libsdl-mixer1.2). I experienced this bug when I uninstalled timidity. This workaround fixed it. -Brandon -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411537: texlive-extra-utils: Installs /usr/bin/dvidvi, which is also in package dvidvi
On Wed, Feb 21, 2007 at 09:21:30AM +0100, Frank Küster wrote: Lionel Elie Mamane [EMAIL PROTECTED] wrote: Which makes me realise that dvidvi depends on tetex to the exclusion of texlive... Pfff... I don't even know why it depends on tetex-bin, to be honest. I thus conclude that dvidvi (...) and hence the package has no reason to depend on them. I uploaded to unstable stripping the dependency. Fine. Should I include an unfreeze request with our request to let the fixed texlive in? I already sent an unblock request for dvidvi. -- Lionel -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411657: The update of the zope-common package depend on the removal of the python2.3 and zope2.7 packages
* 2007-02-21 09:35, Fabio Tranchitella wrote: I see nothing in the package which conflicts with zope2.3 or zope2.7. Damn, I meant python2.3 or zope2.7, sorry. Cheers, -- Fabio Tranchitella http://www.kobold.it Free Software Developer and Consultant http://www.tranchitella.it _ 1024D/7F961564, fpr 5465 6E69 E559 6466 BF3D 9F01 2BF8 EE2B 7F96 1564 signature.asc Description: Digital signature
Bug#411614: A little more info.
I have a little more info that might be useful. I've been researching a bug that occurs in penguin-command, probably due to a bug in libsdl-mixer1.2. libsdl-mixer1.2 is also a dependency of chromium. I ran chromium with the --noaudio option. I think I hit a record. 24 secs till segfault. So, even without audio, chromium still segfaults. Btw, my etch (testing) packages are all up to date. Oh yeah. If anyone wants those core dumps, please email me. And share it on a server and provide a link here if you can. Make sure you use the word debian when you email me. It'll jump you right through my spam filter. -Brandon -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411823: aide: line 342: CHANGES: unbound variable when reporting only on changes
Package: aide Version: 0.13.1-4 Severity: important I'm trying to get AIDE to report only changes. Content of /etc/default/aide: MAILSUBJ=Daily AIDE report for $FQDN MAILTO=root QUIETREPORTS=yes COMMAND=update COPYNEWDB=yes LINES=1000 NOISE= AIDEARGS= When running /etc/cron.daily/aide from the command line as root, I get: ./aide: line 342: CHANGES: unbound variable As far as I can see, variable $CHANGES is never initialised or assigned anywhere. Perhaps $ARETVAL should be used? (personal note: due to holidays, I will not be able to respond for a week after thursday feb. 22) Regards, Matthijs -- System Information: Debian Release: 4.0 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.20 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Versions of packages aide depends on: ii debconf [debconf-2.0]1.5.11 Debian configuration management sy ii liblockfile1 1.06.1 NFS-safe locking library, includes ii mailutils [mailx]1:1.1+dfsg1-3.1 GNU mailutils utilities for handli ii ucf 2.0018.1Update Configuration File: preserv Versions of packages aide recommends: ii cron 3.0pl1-100 management of regular background p -- debconf information: aide/aideinit: false aideinit/copynew: false aideinit/overwritenew: true aide/newlibdir: false -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411537: texlive-extra-utils: Installs /usr/bin/dvidvi, which is also in package dvidvi
Norbert Preining [EMAIL PROTECTED] wrote: Hi Frank! On Mon, 19 Feb 2007, Frank Küster wrote: I discovered this while working on the new upstream version. My machine and my time constraints don't allow to work on two versions at the same time. Therefore this will have to wait one or two days before it's fixed (by excluding dvidvi from texlive-extra-utils). I committed the changes to svn/texlive (the old one) and uploaded 2005.dfsg.2-12 diff.gz, dsc to www.tug.org/texlive/Debian/src/ but you could also rebuildit yourself with the changes submitted. Thank you, I'll make the upload and request the migration hint. Regards, Frank -- Dr. Frank Küster Single Molecule Spectroscopy, Protein Folding @ Inst. f. Biochemie, Univ. Zürich Debian Developer (teTeX/TeXLive)
Bug#408750:
On Feb 21, David Härdeman [EMAIL PROTECTED] wrote: Perhaps this patch from Gentoo could solve the problem?: Yes, I need to review it. -- ciao, Marco signature.asc Description: Digital signature
Bug#398819: $LOGNAME, $HOME should be in /etc/anacrontab
Package: anacron Version: 2.3-13 Followup-For: Bug #398819 I was hit by the same problem and agree with Roderick. The rationale is similar to #304327: The environment provided by anacron should be as close as possible to that provided by cron. Please fix this bug. -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (850, 'testing'), (200, 'unstable'), (50, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-jr2-defiant Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Versions of packages anacron depends on: ii debianutils 2.16.2 Miscellaneous utilities specific t ii libc6 2.5-0exp3 GNU C Library: Shared libraries ii lsb-base 3.1-10 Linux Standard Base 3.1 init scrip Versions of packages anacron recommends: ii cron 3.0pl1-100 management of regular background p ii exim4 4.62-2 metapackage to ease exim MTA (v4) ii exim4-daemon-light [mail-tran 4.62-2 lightweight exim MTA (v4) daemon ii sysklogd [system-log-daemon] 1.4.1-18 System Logging Daemon -- debconf information: anacron/jobs_in_crontab: -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411744: Tellico has various RC bugs
On Tue, Feb 20, 2007 at 06:28:59PM +, Regis Boudin wrote: The tellico packag currently in etch and unstable has a couple of nasty bugs reported and fixed upstream, causing crashes and loss of data. Where are these nasty bugs described? This information is going to be relevant when reviewing the update for inclusion in etch. -- Steve Langasek Give me a lever long enough and a Free OS Debian Developer to set it on, and I can move the world. [EMAIL PROTECTED] http://www.debian.org/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411744: Tellico has various RC bugs
Hi, On Wed, February 21, 2007 09:00, Steve Langasek wrote: On Tue, Feb 20, 2007 at 06:28:59PM +, Regis Boudin wrote: The tellico packag currently in etch and unstable has a couple of nasty bugs reported and fixed upstream, causing crashes and loss of data. Where are these nasty bugs described? This information is going to be relevant when reviewing the update for inclusion in etch. The full changelog of what I prepared reads : * New upstream release, aimed at Etch. Differences with 1.2.4-1 are : + Build fix for OOo plugin (disabled in the package anyway), r1206 + Check if pointer is NULL *before* using it, r1212. + Some minor build issues + Use log messages instead of debug * Also backport a bunch of bugfixes : + r1216 : fix crashing bug in progressitem. + r1224 : clear release list when removing an image. + r1228 : prevent an infinite loop. + r1245 r1248 : fix a race condition leading to loss of images. + r1265 : sometimes images wouldn't show up if the cover column was visible in the list view. + r1340 : sometimes z39.50 results would not show up. * Many thanks to Robby Stephenson, the uptream author, for his help picking the patches for inclusion. * Only call dh_compress once so help files are not compressed and can be read (Closes: #401247). So overall, there is a build fix, use of a NULL pointer, crash, memory leak, infinite loop, loss of data, non-showing of data and inaccessible documentation. The source package is in http://www.imalip.info/tellico/etch/ . Technically, it is a new upstream release. However, the previous package was more of a snapshot, the new release was done the next day or so, and the diff before the additional patches is really short ( that's the debdiff file in http://www.imalip.info/tellico/etch/ , it shouldn't take more than 20s to look at it completely). Considering the source code would be virtually the same with 2 bugfixes, I went for the almost new upstream option rather than the stack up patches on top of patches one. On top of it come the other .diff files, numbered after the svn referenced in the changelog. If anything is wrong with that, please tell me. Also I'm still not a DD and will need a sponsor anyway. CC'ing Amaya, She's been working with me on preparing this yesterday. Regis
Bug#411020: Missing definition for [102b:0522]
Frans Pop schreef: reassign 411020 discover-data thanks On Thursday 15 February 2007 10:21, Paul van der Vlis wrote: 03:00.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) [102b:0522] (rev 02) Comments/Problems: After network-installation the cdrom was still in /etc/apt/sources.list. This is a known issue. We plan to improve this after the release of etch. After the release? The TFT screen did 640x480, 38 Khz, 73hz. Normal is 1024x768. This is probably because your video controller is not yet defined in the discover database which is used for selection of the correct X.Org driver: $ grep 102b0522 pci.lst 102b0522unknown unknown MGA G200e [Pilot] ServerEngines (SEP1) Have you been able to determine the correct driver? Which one is it? I am using now the mga driver with 16 bit colors, what's fine. 24 bit colors gives a resolution of 640x480, this seems to be a bug in the mga driver. I have tried the latest xserver-xorg what came a few days ago, but 24 bit colors gives a resolution of 640x480. You can reconfigure X.Org to select the correct driver using (as root); dpkg-reconfigure xserver-xorg. (Or manually edit the file /etc/X/xorg.conf.) I know. I see in xorg.conf this comment: # If you have edited this file but would like it to be automatically # updated again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg I think sudo is not correct. Thanks for your good work on Debian! With regards, Paul van der Vlis. -- http://www.vandervlis.nl/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411708: ITP: ultrastar-ng -- free C++ Linux based clone of UltraStar
Thanks Steve, you're right. It was only a temporary description for the ITP, but I'd rather improve it a bit. I'll take your suggestions into account. Greetings, Miry --- Steve Greenland [EMAIL PROTECTED] escribió: Free and Linux based are redundant, since this Debian. C++ is probably irrelevant to most users. Clone of UltraStar is not very informative to someone glancing/searching short descriptions for a karaoke game. So perhaps something like Description: karaoke game that allows user supplied songs might be more informative. __ LLama Gratis a cualquier PC del Mundo. Llamadas a fijos y móviles desde 1 céntimo por minuto. http://es.voice.yahoo.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411821: [Kicad-devel] Bug#411821: Upgrade to kicad 0.0.20060829-2 in etch
Would it be possible to upgrade (update ?) the version of kicad to 0.0.20060829-2 in Etch ? A request has already been made to the release manager. Richard. _ Upload 500 photos a month blog with your Messenger buddies on Windows Live Spaces. Get yours now, FREE! http://specials.uk.msn.com/spaces/default.aspx -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411827: kcalc: package dependencies problem
Package: kcalc Version: 4:3.5.5-3 Severity: important kcalc depends on libgmp3c2 package but it's not on kcalc's dependency list. -- System Information: Debian Release: 4.0 APT prefers testing APT policy: (500, 'testing') Architecture: sparc (sparc64) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-3-sparc64 Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411542: dpkg-dev: couldn't open /etc/ld.so.conf: No such file or directory at /usr/bin/dpkg-shlibdeps line 155.
reassign 411542 libc6 retitle 411542 libc6: does not create /etc/ld.so.conf for broken installations severity 411542 serious thanks On Wed, Feb 21, 2007 at 07:54:53AM +0100, Frank Küster wrote: Nicolas François [EMAIL PROTECTED] wrote: couldn't open /etc/ld.so.conf: No such file or directory at /usr/bin/dpkg-shlibdeps line 155. libc6 is supposed to install /etc/ld.so.conf. Do you remember when you installed this Etch? Do you know the version of the libc6 package at that time? My (successful) installation report is in #410710. I used the businesscard.iso from 2007-02-10 In /var/log/aptitude I find Aptitude 0.4.4: log report Mi, Feb 14 2007 13:47:36 +0100 IMPORTANT: this log only lists intended actions; actions which fail due to dpkg problems may not be completed. Will install 34 packages, and remove 0 packages. 217kB of disk space will be used === [...] [UPGRADE] libc6 2.3.6.ds1-10 - 2.3.6.ds1-11 And I don't think I ever used apt-get upgrade. This bug could be caused by the libc6 bug #409516, fixed in libc6 2.3.6.ds1-11 (Feb 3, and migrated to testing only 5 days before your bug report). It could be nice to see if upgrading libc6 fixes this bug. No, it didn't create it upon upgrade. The current postinst has: # Add support for /etc/ld.so.conf.d if [ -z $preversion ] || dpkg --compare-versions $preversion lt 2.3.6-16; then if [ -e /etc/ld.so.conf ]; then [ -z $(tail -n 1 /etc/ld.so.conf) ] || echo /etc/ld.so.conf else touch /etc/ld.so.conf fi if ! grep -q '^include /etc/ld.so.conf.d/.*\.conf$' /etc/ld.so.conf ; then echo 'include /etc/ld.so.conf.d/*.conf' /etc/ld.so.conf fi fi That looks too strict, since in my case $preversion is set, but it is higher than 2.3.6-16. This is indeed to strict. This is actually the version that has introduced the change, so update from sarge or from etch are working. But it does not take into account broken installations. I am reassigning the bug to libc6 as the package must take into account broken installations due to a previous bug in libc6. However, the echo /etc/ld.so.conf seems weird to me. What if a local admin added something there? It looks like a policy violation. Huh??? The policy says that you must preserve local changes. It does not say you must not modified those files. -- .''`. Aurelien Jarno | GPG: 1024D/F1BCDB73 : :' : Debian developer | Electrical Engineer `. `' [EMAIL PROTECTED] | [EMAIL PROTECTED] `-people.debian.org/~aurel32 | www.aurel32.net -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411135: linux-image-2.6.18-4-sparc64-smp: Unknown symbol execve in module bbc
Jurji On Tue, Feb 20, 2007 at 10:22:40AM +, J.J. Green wrote: Finally got the thing compiled, and I can now load/unload the module too -- bug fixed, thanks very much. Unfortunately, when loaded, it spawns a kenvctrld which eats up almost 100% of one the CPUs, so unusable at present. But I've seen a report on the Ubuntu sparc lists with a (1 line) fix for this problem, so I'll have a crack at that now. Hi Jim, Are you talking about the patch like the one in http://lists.debian.org/debian-sparc/2007/02/msg00045.html ? I'd not seen this -- thanks for the link. The fix I mentioned was to just comment out the the msleep_interruptible(250), but according to the link this is not ideal. Curses! I'd come in this morning to find my kernel had finished compiling -- now I'll have to start again. Thanks again Jim -- J.J. Green, Dept. Applied Mathematics, Hicks Bld., University of Sheffield, UK. +44 (0114) 222 3742 http://pdfb.wiredworkplace.net/pub/jjg -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411833: ITP: gozerbot -- An IRC and Jabber bot written in Python
Package: wnpp Severity: wishlist Owner: Jeremy Malcolm [EMAIL PROTECTED] * Package name: gozerbot Version : 0.6.1 Upstream Author : Bas van Oostveen [EMAIL PROTECTED] * URL : http://r8.cg.nu/ * License : BSD Programming Lang: Python Description : An IRC and Jabber bot written in Python This is a bot which can simultaneously inhabit one or more IRC channels and Jabber services, providing facilities such as: . - Fetching RSS feeds - Keeping to-do and shopping lists - Relaying between bot instances - Anything else you develop a plugin to do -- System Information: Debian Release: 4.0 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.4.26-3um Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411542: dpkg-dev: couldn't open /etc/ld.so.conf: No such file or directory at /usr/bin/dpkg-shlibdeps line 155.
Aurelien Jarno [EMAIL PROTECTED] wrote: However, the echo /etc/ld.so.conf seems weird to me. What if a local admin added something there? It looks like a policy violation. Huh??? The policy says that you must preserve local changes. It does not say you must not modified those files. It was too early in the morning. I read '' where in fact it uses ''. Regards, Frank -- Dr. Frank Küster Single Molecule Spectroscopy, Protein Folding @ Inst. f. Biochemie, Univ. Zürich Debian Developer (teTeX/TeXLive)
Bug#411831: [INTL:gl] Galician debconf templates translation for libapache2-mod-python
Package: libapache2-mod-python Severity: wishlist Tags: l10n patch It is attached to this report. # Galician translation of libapache2-mod-python's debconf templates # This file is distributed under the same license as the libapache2-mod-python package. # Jacobo Tarrio [EMAIL PROTECTED], 2007. # msgid msgstr Project-Id-Version: libapache2-mod-python\n Report-Msgid-Bugs-To: [EMAIL PROTECTED] POT-Creation-Date: 2006-11-19 22:14+0100\n PO-Revision-Date: 2007-02-21 10:50+0100\n Last-Translator: Jacobo Tarrio [EMAIL PROTECTED]\n Language-Team: Galician [EMAIL PROTECTED]\n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n #. Type: boolean #. Description #: ../libapache2-mod-python.templates:1001 msgid Enable the Apache 2 mod_python module? msgstr ¿Activar o módulo mod_python de Apache 2? #. Type: boolean #. Description #: ../libapache2-mod-python.templates:1001 msgid You need to enable the module to use websites written for mod_python. msgstr Ten que activar o módulo para empregar sitios web escritos para mod_python. #. Type: boolean #. Description #: ../libapache2-mod-python.templates:1001 msgid Choosing to enable the module creates a symbolic link for mod_python in /etc/ apache2/mods_enabled/, chosing to not enable the module removes that link. msgstr Se decide activar o módulo hase crear unha ligazón simbólica para mod_python en /etc/apache2/mods_enabled/; se decide non o activar hase eliminar a ligazón. #. Type: boolean #. Description #: ../libapache2-mod-python.templates:1001 msgid NB. You will need to restart Apache 2 manually after changing this option. msgstr Nota: ha ter que reiniciar Apache 2 manualmente despois de cambiar esta opción.
Bug#411835: ITP: nekobee -- simple acid patterns, with TR-808 samples from Qsynth
Package: wnpp Owner: Free Ekanayaka [EMAIL PROTECTED] Severity: wishlist * Package name: nekobee Version : 0.1.5 Upstream Author : Sean Bolton (musound at jps dot net) * URL or Web page : http://www.nekosynth.co.uk/ * License : GPL Description : simple acid patterns, with TR-808 samples from Qsynth Recreate those squelchy acid sounds with nekobee, a simple single-oscillator synth based on the Roland TB-303. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411832: [INTL:gl] Galician debconf templates translation for lvm2
Package: lvm2 Severity: wishlist Tags: l10n patch It is attached to this report. # Galician translation of lvm2's debconf templates # This file is distributed under the same license as the lvm2 package. # Jacobo Tarrio [EMAIL PROTECTED], 2007. # msgid msgstr Project-Id-Version: lvm2\n Report-Msgid-Bugs-To: [EMAIL PROTECTED] POT-Creation-Date: 2006-10-15 11:52+\n PO-Revision-Date: 2007-02-21 10:54+0100\n Last-Translator: Jacobo Tarrio [EMAIL PROTECTED]\n Language-Team: Galician [EMAIL PROTECTED]\n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n #. Type: error #. Description #: ../lvm2.templates:1001 msgid Snapshot format changes msgstr Cambio de formato dos \snapshots\ #. Type: error #. Description #: ../lvm2.templates:1001 msgid The internal format of snapshots has changed between LVM1 and LVM2. Any snapshots you have in LVM1 will be not be available to LVM2. msgstr O formato interno dos \snapshots\ cambiou entre LVM1 e LVM2. Os \snapshots \ que teña en LVM1 non han estar dispoñibles en LVM2. #. Type: error #. Description #: ../lvm2.templates:1001 msgid The installation procedure has detected that you have LVM1 snapshots on your system. Before you complete the upgrade to LVM2 it is recommended that you remove these snapshots and save their data if necessary. msgstr O procedemento de instalación detectou que ten \snapshots\ de LVM1 no seu sistema. Antes de completar a actualización a LVM2 recoméndase que os elimine e conserve os seus datos se fan falla. #. Type: error #. Description #: ../lvm2.templates:1001 msgid All other LVM data will be preserved in the upgrade. msgstr Hanse conservar os demáis datos de LVM na actualización.
Bug#109963: vfs view of .deb supresses empty directories
found 109963 1:4.6.1-6 thanks Hi, I cannot see in this bug log when and why it was marked as done. Why? This bug is still present in mc 1:4.6.1-6, as shown by the attached .deb file. With either 'dpkg-deb -x' or F3 in mc, you can see /usr/share/test-directory, but it is hidden when using the deb extfs. foo_1.0-6_all.deb Description: Test package PS: I think 'normal' instead of 'minor' was the appropriate severity, as set by the submitter, but I won't fight for this. Regards, -- Florent
Bug#411829: [INTL:gl] Galician debconf templates translation for squid
Package: squid Severity: wishlist Tags: l10n patch It's attached to this report. # Galician translation of squid's debconf templates # This file is distributed under the same license as the squid package. # Jacobo Tarrio [EMAIL PROTECTED], 2007. # msgid msgstr Project-Id-Version: squid\n Report-Msgid-Bugs-To: [EMAIL PROTECTED] POT-Creation-Date: 2006-07-12 15:35+0200\n PO-Revision-Date: 2007-02-21 10:46+0100\n Last-Translator: Jacobo Tarrio [EMAIL PROTECTED]\n Language-Team: Galician [EMAIL PROTECTED]\n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n #. Type: note #. Description #: ../templates:1001 msgid The http_anonymizer directive has been replaced with header_replace and header_access. msgstr A directiva http_anonymizer foi substituída por header_replace e header_access. #. Type: note #. Description #: ../templates:1001 msgid The http_anonymizer directive that was present in squid 2.1 and 2.2 doesn't exist anymore in squid 2.3 and up. It has been replaced with header_replace and header_access that provide more fine-grained control over HTTP headers. Right now, your squid doesn't anonymize the HTTP headers anymore so you probably want to fix this. The new format is explained in the new 2.5 config file, of which you probably have a copy in /usr/share/doc/squid/examples/ squid.conf. msgstr A directiva http_anonymizer que existía en squid 2.1 e 2.2 xa non existe en squid 2.3 e posteriores. Substituiuse polas directivas header_replace e header_access, que dan un control de gran máis fino sobre as cabeceiras HTTP. Agora mesmo, a súa instalación de squid non está a anonimizar as cabeceiras HTTP, polo que seguramente queira arranxar isto. O novo formato explícase no novo ficheiro de configuración de 2.5, do que seguramente teña unha copia en /usr/share/doc/squid/examples/squid.conf. #. Type: note #. Description #: ../templates:2001 msgid The anonymize_headers and fake_user_agent directives have been replaced with header_access and header_replace. msgstr As directivas anonymize_headers e fake_user_agent foron substituídas por header_access e header_replace. #. Type: note #. Description #: ../templates:2001 msgid The anonymize_headers and fake_user_agent directives that were present in squid 2.3 and 2.4 don't exist anymore in squid 2.5 and up. They have been replaced with header_replace and header_access that provide more fine- grained control over HTTP headers. Right now, your squid doesn't anonymize the HTTP headers anymore so you probably want to fix this. The new format is explained in the new 2.5 config file, of which you probably have a copy in / usr/share/doc/squid/examples/squid.conf. msgstr As directivas anonymize_headers e fake_user_agent que existían en squid 2.3 e 2.4 xa non existen en squid 2.5 e posteriores. Substituíronse polas directivas header_replace e header_access, que dan un control de gran máis fino sobre as cabeceiras HTTP. Agora mesmo, a súa instalación de squid non está a anonimizar as cabeceiras HTTP, polo que seguramente queira arranxar isto. O novo formato explícase no novo ficheiro de configuración de 2.5, do que seguramente teña unha copia en /usr/share/doc/squid/examples/squid.conf. #. Type: boolean #. Description #: ../templates:3001 msgid There is no automatic upgrade path to squid 2.5. msgstr Non hai unha ruta de actualización automática a squid 2.5. #. Type: boolean #. Description #: ../templates:3001 msgid SQUID 2.5 INSTALLATION WARNING msgstr Aviso da instalación de squid 2.5 #. Type: boolean #. Description #: ../templates:3001 msgid You are upgrading squid from an 1.x version to the 2.5 version. The 1.x and 2.5 versions are NOT compatible. The structure of the cache directory is different and the configuration file \squid.conf\ is not entirely compatible. msgstr Está a actualizar squid dunha versión 1.x á versión 2.5. As versións 1.x e 2.5 NON son compatibles. A estructura do directorio de caché é diferente e o ficheiro de configuración \squid.conf\ non é completamente compatible. #. Type: boolean #. Description #: ../templates:3001 msgid If you have an old cache directory, please quit NOW and remove the old cache by hand (in /var/spool/squid). Then re-install this squid version. msgstr Se ten un directorio de caché antigo, saia agora e elimine a caché antiga á man (en /var/spool/squid). Despois volva instalar esta versión de squid. #. Type: boolean #. Description #: ../templates:3001 msgid Also, please accept the new configuration file. After upgrading your old configuration file can be found in \/etc/squid.conf.dpkg-old\. Then you have to edit the new configuration file by hand to match your old configuration. msgstr Ademáis, acepte o novo ficheiro de configuración. Despois de actualizar ha poder atopar o seu ficheiro de configuración antigo en \/etc/squid.conf. dpkg-old\. Despois ha ter que editar o novo ficheiro de configuración á man para
Bug#411836: [INTL:gl] Galician debconf templates translation for auctex
Package: auctex Severity: wishlist Tags: l10n patch It is attached to this report. # Galician translation of auctex's debconf templates # This file is distributed under the same license as the auctex package. # Jacobo Tarrio [EMAIL PROTECTED], 2007. # msgid msgstr Project-Id-Version: auctex\n Report-Msgid-Bugs-To: [EMAIL PROTECTED] POT-Creation-Date: 2006-12-08 16:38+0100\n PO-Revision-Date: 2007-02-21 11:07+0100\n Last-Translator: Jacobo Tarrio [EMAIL PROTECTED]\n Language-Team: Galician [EMAIL PROTECTED]\n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n #. Type: select #. Choices #: ../auctex/templates:1001 msgid Background msgstr Fondo #. Type: select #. Choices #: ../auctex/templates:1001 msgid Foreground msgstr Primeiro plano #. Type: select #. Choices #: ../auctex/templates:1001 msgid None msgstr Ningún #. Type: select #. Description #: ../auctex/templates:1002 msgid (La)TeX macros parsing mode: msgstr Modo de análise de macros de (La)TeX: #. Type: select #. Description #: ../auctex/templates:1002 msgid To greatly improve AUCTeX performances, every TeX macro package and LaTeX style file currently installed at your site will be parsed. msgstr Para mellorar moito o rendemento de AUCTeX, hanse analizar tódolos paquetes de macros de TeX e ficheiros de estilos de LaTeX instalados actualmente no seu sitio. #. Type: select #. Description #: ../auctex/templates:1002 msgid This may take a lot of time, so it should be probably done in the background; however you may also choose to have it done in the foreground, or to skip the parsing at all instead. If you choose Background, you will find a detailed log of the process in the file: ${LOGFILE}. msgstr Isto pode levar moito tempo, así que seguramente sexa mellor facelo coma tarefa de fondo; nembargantes tamén pode facelo coma tarefa de primeiro plano, ou omitir completamente a análise. Se escolle \Fondo\, ha ter un rexistro detallado do proceso no ficheiro ${LOGFILE}. #. Type: select #. Description #: ../auctex/templates:1002 msgid A weekly cron job will also take care of updating the data collected now, so usually you won't need to worry about them whenever you install new (La)TeX packages or remove old ones. msgstr Unha tarefa de cron semanal tamén se ha encargar de actualizar os datos que se colleiten agora, así que normalmente non ha ter que se preocupar por eles ao instalar novos paquetes de (La)TeX ou eliminar paquetes antigos. #. Type: select #. Description #: ../auctex/templates:1002 msgid Anyway, you can update them by hand running update-auctex-elisp. msgstr De tódolos xeitos, pode actualizalos á man executando update-auctex-elisp. #. Type: select #. Choices #: ../auctex/templates:2001 msgid Console msgstr Consola #. Type: select #. Choices #: ../auctex/templates:2001 msgid File msgstr Ficheiro #. Type: select #. Description #: ../auctex/templates:2002 msgid Parsing output destination: msgstr Destino da saída da análise: #. Type: select #. Description #: ../auctex/templates:2002 msgid You chose to parse TeX macro packages and LaTeX style files in foreground. This is OK, but normally it will also generate quite a lot of output. msgstr Decidiu analizar os paquetes de macros de TeX e os ficheiros de estilos de LaTeX nunha tarefa de fondo. Isto é correcto, pero normalmente tamén xera moita saída. #. Type: select #. Description #: ../auctex/templates:2002 msgid By default -- i.e., answering File to this question -- further output from the parsing process will go to a file named: ${LOGFILE}. msgstr Por defecto -- é dicir, se resposta \Ficheiro\ a esta pregunta --, a saída do proceso de análise ha ir a un ficheiro chamado ${LOGFILE}. #. Type: select #. Description #: ../auctex/templates:2002 msgid If you answer Console, you will see all of the (boring) output right on your terminal. msgstr Se resposta \Consola\ ha ver toda a saída no seu terminal.
Bug#411834: [INTL:gl] Galician debconf templates translation for analog
Package: analog Severity: wishlist Tags: l10n patch It is attached to this report. # Galician translation of analog's debconf templates # This file is distributed under the same license as the analog package. # Jacobo Tarrio [EMAIL PROTECTED], 2007. # msgid msgstr Project-Id-Version: analog\n Report-Msgid-Bugs-To: \n POT-Creation-Date: 2007-02-10 04:30+0100\n PO-Revision-Date: 2007-02-21 11:00+0100\n Last-Translator: Jacobo Tarrio [EMAIL PROTECTED]\n Language-Team: Galician [EMAIL PROTECTED]\n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n #. Type: boolean #. Description #: ../templates:1001 msgid Enable the anlgform web interface to analog? msgstr ¿Activar a interface web de analog, anlgform? #. Type: boolean #. Description #: ../templates:1001 msgid Analog includes a cgi script called anlgform that provides a web interface to analog. It has a history of security problems, and may expose information (web site logs) that you don't want to make public. msgstr Analog inclúe un script cgi chamado anlgform que fornece unha interface web para analog. Ten unha historia de problemas de seguridade, e pode expor información (rexistros dos sitios web) que non quere publicar.
Bug#411830: version-problem with packagename
Package: console-tools, libconsole Version: 1:0.2.3dbs-65 when i do 'apt-get autoclean' or 'aptitude autoclean', the (actual) packages would be removed from cache. in contrary to that, 'apt-move delete' does not delete them from it's mirror-tree (that is okay). when i rename the files in cache from: console-tools_0.2.3dbs-65_i386.deb libconsole_0.2.3dbs-65_i386.deb to: console-tools_1:0.2.3dbs-65_i386.deb libconsole_1:0.2.3dbs-65_i386.deb they are not removed by apt-get or aptitude. Debian GNU/Linux 4.0, etch kernel-2.6.18-3-k7, 2.6.18-7 and libc6 2.3.6.ds1-11 apt 0.6.46.4 aptitude 0.4.4-1 apt-move 4.2.26-1 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#410561: My current PHP patch collection
Hi Sean, sean finney [2007-02-21 8:34 +0100]: what are the outstanding issues, btw? hopefully between you, myself, and joe's work i can get a security release prepared by this weekend. In fact I sorted out all the outstanding issues yesterday and updated the file, so you might not even have seen the TODO items. Also, I ignored the php-interbase part of CVE-2007-0906 because this bit is in Ubuntu universe, but it affects php4-interbase in Sarge and php5-interbase in testing/unstable. Martin -- Martin Pitthttp://www.piware.de Ubuntu Developer http://www.ubuntu.com Debian Developer http://www.debian.org signature.asc Description: Digital signature
Bug#408714: libgnomevfs2-0: Irrelevant volume listed on computer:///
Roland Mas, 2007-01-27 22:11:01 +0100 : Package: libgnomevfs2-0 Version: 1:2.14.2-5 Severity: normal My Nautilus computer:/// windows shows an extraneous 972.7 MB Volume icon in addition to the normal floppy, CD, filesystem and network icons. This problem apparently got fixed since then; I no longer see that behaviour. I'm not sure the fix was in the new 2.14.2-6 package, or in an upgraded kernel (linux-image-2.6.18-4-xen-686 version 2.6.18.dfsg.1-10), or something else. In any case, feel free to close this bug report. Roland. -- Roland Mas /* Halley */ (Halley's comment.) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411542: libc6: does not create /etc/ld.so.conf for broken installations
severity 411542 important thanks This is indeed to strict. This is actually the version that has introduced the change, so update from sarge or from etch are working. But it does not take into account broken installations. I am reassigning the bug to libc6 as the package must take into account broken installations due to a previous bug in libc6. As this does not (AIUI) affect upgrades from sarge, this is not a must for the release; downgrading. -- Steve Langasek Give me a lever long enough and a Free OS Debian Developer to set it on, and I can move the world. [EMAIL PROTECTED] http://www.debian.org/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411838: e2fsprogs: fsck.ext3 can end up looping
Package: e2fsprogs In lib/ext2fs/icount.c(get_icount_el) there is some code which looks like this: /* Interpolate for efficiency */ lowval = icount-list[low].ino; highval = icount-list[high].ino; if (ino lowval) range = 0; else if (ino highval) range = 1; else range = ((float) (ino - lowval)) / (highval - lowval); mid = low + ((int) (range * (high-low))); I had a file system where range ended up being 1.0f, low being 0 and high being a large number. Due to how floating point works, this meant mid ended up being high and the while loop never terminated. Clamping the mid value to be = high and = low fixed this problem. - tfheen -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411837: PostgreSQL package installation error in setting stage
Package: postgresql Version: 7.4.7-6sarge4 I am not able install postgresql in Debian stable. Here's the aptitude output. I try to install it in C locale and I am using the POSIX locale in my computer. # aptitude install postgresql Reading Package Lists... Done Building Dependency Tree Reading extended state information Initializing package states... Done Reading task descriptions... Done The following NEW packages will be automatically installed: libperl5.8 postgresql-client The following NEW packages will be installed: libperl5.8 postgresql postgresql-client 0 packages upgraded, 3 newly installed, 0 to remove and 0 not upgraded. Need to get 4849kB of archives. After unpacking 13.0MB will be used. Do you want to continue? [Y/n/?] Writing extended state information... Done Get:1 http://ftp.debian.org stable/main libperl5.8 5.8.4-8sarge5 [509kB] Get:2 http://security.debian.org stable/updates/main postgresql-client 7.4.7-6sarge4 [540kB] Get:3 http://security.debian.org stable/updates/main postgresql 7.4.7-6sarge4 [3800kB] Fetched 4849kB in 14s (338kB/s) Preconfiguring packages ... Selecting previously deselected package libperl5.8. (Reading database ... 33431 files and directories currently installed.) Unpacking libperl5.8 (from .../libperl5.8_5.8.4-8sarge5_i386.deb) ... Selecting previously deselected package postgresql-client. Unpacking postgresql-client (from .../postgresql-client_7.4.7-6sarge4_i386.deb) ... Selecting previously deselected package postgresql. Unpacking postgresql (from .../postgresql_7.4.7-6sarge4_i386.deb) ... Setting up libperl5.8 (5.8.4-8sarge5) ... Setting up postgresql-client (7.4.7-6sarge4) ... Setting up postgresql (7.4.7-6sarge4) ... Creating config file /etc/postgresql/postmaster.conf with new version /tmp/pg.NSSUFV: line 3524: `_comp-dpkg-installed-packages': not a valid identifier dpkg: error processing postgresql (--configure): subprocess post-installation script returned error exit status 2 Errors were encountered while processing: postgresql E: Sub-process /usr/bin/dpkg returned an error code (1) Ack! Something bad happened while installing packages. Trying to recover: Setting up postgresql (7.4.7-6sarge4) ... /tmp/pg.uvm9Pe: line 3524: `_comp-dpkg-installed-packages': not a valid identifier dpkg: error processing postgresql (--configure): subprocess post-installation script returned error exit status 2 Errors were encountered while processing: postgresql Reading Package Lists... Done Building Dependency Tree Reading extended state information Initializing package states... Done Reading task descriptions... Done I am using Debian stable and bash version 2.05b-26 Thanks
Bug#411839: linux-2.6: IPv6 PMTU table not garbage collected?
Package: linux-2.6 Version: 2.6.18-8 Severity: normal Symptoms: After a few weeks/months of uptime, my IPv6 machines whose IPv6 first hop link MTU is more than the minimum (1280) stop reacting to ICMPv6 too big packets and keep sending TCP packets above the MTU of the path to other hosts. Expected behaviour: After getting an ICMPv6 too big packet, send only packets smaller than the MTU in given in that ICMPv6 packet to this host. Analysis: I get the impression that the table where the kernel keeps the PMTU to the IPv6 hosts it communicates with overflows over time, after a few weeks or months of uptime. It looks like entries in that table expire (because I do get the too big packets problem with hosts my hosts communicate with a lot, they certainly were in the table in the past), but that the place taken by expired entries is not freed up. Thus the table doesn't get new entries added when the ICMPv6 too big packet comes in and the TCP stack doesn't go back to smaller packets. The symptoms seen by the users is that e.g. a SSH or SMTP connection gets established OK, but once they start doing something big with it (like the DATA phase of the SMTP dialogue or doing an ls of a big directory in a ssh session), the connexion freezes. Once that effect kicks in, it affects all new IPv6 connections/hosts. A tcpdump shows that ICMPv6 too big packets come in, but that my host keeps sending too big packets. A reboot cures it. I vaguely remember that the first time this happened, I found some statistics file in /proc/ or /sys/ where one line said some table had 4095 entries, which led me to this analysis. Alas, when it happened again I could not remember what file that was and can't find it again now. I didn't report it at the time because the kernel run by this machine is rather old. But now it happened on a machine running 2.6.18-3-amd64, and echo 8192 /proc/sys/net/ipv6/route/max_size seems to have helped the problem. -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-3-amd64 Locale: LANG=fr_LU.UTF-8, LC_CTYPE=fr_LU.UTF-8 (charmap=UTF-8) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#381731: deb-reversion: licence change
tag 381731 + patch thanks Here you go: --- /usr/bin/deb-reversion 2006-12-04 09:53:43.0 +0100 +++ /tmp/deb-reversion 2007-02-21 11:50:53.0 +0100 @@ -1,13 +1,10 @@ -#! /bin/bash +#!/bin/bash # # deb-reversion -- a script to bump a .deb file's version number. # -# The programme has been published under the terms of the Artistic Licence. -# Please see http://www.opensource.org/licenses/artistic-license.php for more -# information. -# -# deb-reversion (c) 2004-6 by martin f. krafft [EMAIL PROTECTED] -# contributors: Goswin von Brederlow, Filippo Giunchedi +# Copyright © martin f. krafft [EMAIL PROTECTED] +# with contributions by: Goswin von Brederlow, Filippo Giunchedi +# Released under the terms of the Artistic Licence 2.0 # # TODO: # - add debugging output. @@ -16,12 +13,12 @@ set -eu PROGNAME=${0##*/} -PROGVERSION=0.9 +PROGVERSION=0.9.1 VERSTR='LOCAL.' versioninfo() { echo $PROGNAME $PROGVERSION - echo $PROGNAME is copyright 2004-06 martin f. krafft + echo $PROGNAME is copyright © martin f. krafft echo Released under the terms of the Artistic Licence 2.0 echo This programme is part of devscripts 2.9.27. } -- .''`. martin f. krafft [EMAIL PROTECTED] : :' : proud Debian developer, author, administrator, and user `. `'` http://people.debian.org/~madduck - http://debiansystem.info `- Debian - when you have better things to do than fixing systems signature.asc Description: Digital signature (GPG/PGP)
Bug#358772: glibc can not be cross-compiled with softfloat for ARM
Hi, The current glibc includes support for the arm-softfloat architecture, using the patch that has been sent via this bug. What's the current status of the arm-softfloat architecture? If I understand correctly, it has been more or less replaced by the armel (ARM EABI) architecture, which is supported in the experimental glibc. I don't really want to keep this patch if it is not used anymore. Moreover it breaks other architectures, so it needs to be applied conditionally. Bye, Aurelien -- .''`. Aurelien Jarno | GPG: 1024D/F1BCDB73 : :' : Debian developer | Electrical Engineer `. `' [EMAIL PROTECTED] | [EMAIL PROTECTED] `-people.debian.org/~aurel32 | www.aurel32.net -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#398541: Errors reported while parsing UTF-8 encoded sites
On Tue, Nov 14, 2006 at 09:33:19PM +0100, Michael Tautschnig wrote: [...] Hi, can you please tell me the address of one of your webpages on which checkbot produces this error? I guess it is http://www.model.in.tum.de, checkbot call is: checkbot --url http://www.model.in.tum.de --dontwarn '(301|302|400|401|903)' The latest upstream version of checkbot (1.79) fixes this bug, but now triggers a different error message (for the same url). I will try to get a fix for that before uploading the package. -Ralf. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411840: procps: ps doesn't resolve uid-username of some processes
Package: procps Version: 1:3.2.7-3 Severity: normal Processes which are running under users haldaemon and messagebus are displayed somehow different by ps utility. The following output of ps shows that their uids are not resolved into usernames. They are left 102 and 103 correspondingly. A simple test program that uses getpwuid() libc function works correctly, so this is not a bug of libc6 but the bug of procps package. $ ps aux USER PID %CPU %MEMVSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.2 2472 632 ?Ss Feb20 0:02 init [2] root 2 0.0 0.0 0 0 ?SN Feb20 0:00 [ksoftirqd/0] root 3 0.0 0.0 0 0 ?S Feb20 0:01 [events/0] root 4 0.0 0.0 0 0 ?S Feb20 0:00 [khelper] root 5 0.0 0.0 0 0 ?S Feb20 0:00 [kthread] root73 0.0 0.0 0 0 ?SFeb20 0:00 [powerd] root74 0.0 0.0 0 0 ?S Feb20 0:00 [kblockd/0] root77 0.0 0.0 0 0 ?S Feb20 0:00 [khubd] root79 0.0 0.0 0 0 ?S Feb20 0:00 [kseriod] root 118 0.0 0.0 0 0 ?SFeb20 0:00 [pdflush] root 119 0.0 0.0 0 0 ?SFeb20 0:03 [pdflush] root 120 0.0 0.0 0 0 ?S Feb20 0:01 [kswapd0] root 121 0.0 0.0 0 0 ?S Feb20 0:00 [aio/0] root 752 0.0 0.0 0 0 ?S Feb20 0:00 [kpsmoused] root 1933 0.0 0.0 0 0 ?S Feb20 0:00 [kjournald] root 2094 0.0 0.1 2984 448 ?Ss Feb20 0:01 udevd --daemon root 3102 0.0 0.0 0 0 ?S Feb20 0:00 [kmirrord] root 3134 0.0 0.0 0 0 ?S Feb20 0:01 [kjournald] root 3136 0.0 0.0 0 0 ?S Feb20 0:00 [kjournald] root 3523 0.0 0.2 1992 720 ?Ss Feb20 0:00 /sbin/syslogd root 3529 0.0 0.1 1872 416 ?Ss Feb20 0:00 /sbin/klogd -x 102 3536 0.0 0.2 3152 560 ?Ss Feb20 0:00 /usr/bin/dbus-daemon --system 103 3544 0.0 0.3 11888 960 ?Ss Feb20 0:02 /usr/sbin/hald root 3545 0.0 0.2 4104 552 ?SFeb20 0:00 hald-runner 103 3557 0.0 0.2 2728 744 ?SFeb20 0:00 hald-addon-keyboard: listening on /dev/input/event0 root 3561 0.0 0.2 2232 616 ?SFeb20 0:00 hald-addon-storage: polling /dev/hdc -- System Information: Debian Release: 4.0 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-3-686 Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Versions of packages procps depends on: ii libc6 2.3.6.ds1-11 GNU C Library: Shared libraries ii libncurses5 5.5-5Shared libraries for terminal hand ii lsb-base3.1-23 Linux Standard Base 3.1 init scrip Versions of packages procps recommends: ii psmisc22.3-1 Utilities that use the proc filesy -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#363263: emacs-goodies-el: Session.el conflicts w/ Org Mode of emacs-snapshot
Hi Christoph, session.el saves variables includes of ring or history. so put below code in ~/.emacs: (add-to-list 'session-globals-exclude 'org-mark-ring) regards -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#398904: reportbug: the same problem occurs when reporting bug for xserver-xorg
Package: reportbug Version: 3.31 Followup-For: Bug #398904 While trying to sumbit bug for xserver-xorg, I get the following: -CUT HERE- Please briefly describe your problem (you can elaborate in a moment; an empty response will stop reportbug). This should be a concise summary of what is wrong with the package, for example, fails to send email or does not start with -q option specified. package dependencies problem Rewriting subject to 'xserver-xorg: package dependencies problem' Enter any additional addresses this report should be sent to; press ENTER after each address. Press ENTER on a blank line to continue. How would you rate the severity of this problem or report? 1 criticalmakes unrelated software on the system (or the whole system) break, or causes serious data loss, or introduces a security hole on systems where you install the package. 2 grave makes the package in question unusable by most or all users, or causes data loss, or introduces a security hole allowing access to the accounts of users who use the package. 3 serious is a severe violation of Debian policy (that is, the problem is a violation of a 'must' or 'required' directive); may or may not affect the usability of the package. Note that non-severe policy violations may be 'normal,' 'minor,' or 'wishlist' bugs. (Package maintainers may also designate other bugs as 'serious' and thus release-critical; however, end users should not do so.) 4 important a bug which has a major effect on the usability of a package, without rendering it completely unusable to everyone. 5 does-not-build a bug that stops the package from being built from source. (This is a 'virtual severity'.) 6 normal a bug that does not undermine the usability of the whole package; for example, a problem with a particular option or menu item. 7 minor things like spelling mistakes and other minor cosmetic errors that do not affect the core functionality of the package. 8 wishlistsuggestions and requests for new features. Please select a severity level: [normal] Do any of the following apply to this report? 1 l10n This bug reports a localization/internationalization issue. 2 patch You are including a patch to fix this problem. 3 none Please select tags: (one at a time) [none] Traceback (most recent call last): File /usr/bin/reportbug, line 1747, in ? main() File /usr/bin/reportbug, line 779, in main return iface.user_interface() File /usr/bin/reportbug, line 1645, in user_interface klass, subject, tags, body, mode, pseudos) File /usr/share/reportbug/reportbug.py, line 729, in generate_blank_report return %s%s%s UnicodeDecodeError: 'ascii' codec can't decode byte 0xd0 in position 604: ordinal not in range(128) -CUT HERE- -- Package-specific info: ** Environment settings: INTERFACE=text ** /home/dmitrmax/.reportbugrc: reportbug_version 3.31 mode advanced ui text email [EMAIL PROTECTED] smtphost smtp.wplus.net -- System Information: Debian Release: 4.0 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-3-686 Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Versions of packages reportbug depends on: ii python2.4.4-2An interactive high-level object-o ii python-central0.5.12 register and build utility for Pyt Versions of packages reportbug recommends: pn python-cjkcodecs | python-ico none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#408536: ipmievd daemon does not work
Hello, all I have the same problem. When I run ipmievd open daemon it des not print anything, exits with 0 code, but this is in syslog: Feb 21 10:06:38 gate ipmievd: Reading sensors... Feb 21 10:06:38 gate ipmievd: Unable to send command: Invalid argument Feb 21 10:06:38 gate ipmievd: Get Device ID command failed Feb 21 10:06:38 gate ipmievd: Unable to open SDR for reading Feb 21 10:06:38 gate ipmievd: Unable to send command: Invalid argument Feb 21 10:06:38 gate ipmievd: Get BMC Global Enables command failed Feb 21 10:06:38 gate ipmievd: Could not enable event message buffer Feb 21 10:06:38 gate ipmievd: Error setting up Event Interface open If i run ipmievd sel daemon it again des not print anything, exits with 0 code, but forks a background process taht reports this in syslog: Feb 21 11:38:20 gate ipmievd: Reading sensors... Feb 21 11:38:20 gate ipmievd: Unable to send command: Invalid argument Feb 21 11:38:20 gate ipmievd: Get Device ID command failed Feb 21 11:38:20 gate ipmievd: Unable to open SDR for reading Feb 21 11:38:20 gate ipmievd: Unable to send command: Invalid argument Feb 21 11:38:20 gate ipmievd: Get SEL Info command failed Feb 21 11:38:20 gate ipmievd: Waiting for events... Feb 21 11:38:20 gate ipmievd: Unable to send command: Invalid argument Feb 21 11:38:20 gate ipmievd: Get SEL Info command failed Feb 21 11:38:30 gate ipmievd: Unable to send command: Invalid argument Feb 21 11:38:30 gate ipmievd: Get SEL Info command failed Feb 21 11:38:40 gate ipmievd: Unable to send command: Invalid argument Feb 21 11:38:40 gate ipmievd: Get SEL Info command failed ... and so on untill killed It works for me only in ipmievd sel nodaemon mode. ii ipmitool 1.8.8-2 -- Regards Vladislav Kurz -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411093: plone-site 2.5.1-4 fails to setup zope instance of plone site.
reassign 411093 zope-cachefu 1.0.1-2 retitle 411093 zope-cachefu: duplicate field in the dzproduct file severity 411093 grave thanks * 2007-02-16 00:28, Rafael Plage wrote: Package: plone-site Version: 2.5.1-4 Severity: important The automatic plone-site setup does not work. This is the error message: plone-site failed to preconfigure, with exit status 10 Setting up plone-site (2.5.1-4) ... dpkg: error processing plone-site (--configure): subprocess post-installation script returned error exit status 10 This is a problem in the zope-cachefu package, so I reassigned this bug report to it. The problem is already fixed in the unstable version of the package, which is a new upstream release. I'll talk with the RMs to see if it is suitable for etch inclusion, otherwise I'll prepare a testing-proposed-updates upload. Thanks for reporting the problem, -- Fabio Tranchitella http://www.kobold.it Free Software Developer and Consultant http://www.tranchitella.it _ 1024D/7F961564, fpr 5465 6E69 E559 6466 BF3D 9F01 2BF8 EE2B 7F96 1564 signature.asc Description: Digital signature
Bug#411657: The update of the zope-common package depend on the removal of the python2.3 and zope2.7 packages
Fabio Tranchitella wrote: * 2007-02-20 12:34, Frederic MASSOT wrote: Package: zope-common Version: 0.5.21 Severity: normal Hi, The update of the zope-common package (0.5.21 to 0.5.31) depend on the removal of the python2.3 and zope2.7 packages. This update is dangerous on a Zope server with web sites which use Zope 2.7 (Plone 2.0 and Plone 2.1) and Zope 2.9 (Plone 2.5). Hi Frederic, I'm sorry, but I can't understand your bug report. What does the sentence depend on the removal of the python2.3 and zope2.7 packages mean? Could you please post the output of aptitude upgrade / dist-upgrade? I see nothing in the package which conflicts with zope2.3 or zope2.7. Hi, I think that the problem comes from the dependences of zope-common (0.5.31): zope-common (0.5.21) depend on python2.4 zope-common (0.5.31) depend on python (= 2.4) # apt-cache policy python python: Installed: 2.3.5-2 Candidate: 2.4.4-2 Version table: 2.4.4-2 0 500 ftp://ftp.fr.debian.org etch/main Packages *** 2.3.5-2 0 500 ftp://ftp.fr.debian.org sarge/main Packages 100 /var/lib/dpkg/status # apt-get -s install python Reading package lists... Done Building dependency tree... Done The following extra packages will be installed: coreutils cpp-4.1 dpkg gcc-4.1 gcc-4.1-base libfreetype6 libgcc1 libgpg-error0 libmudflap0 libmudflap0-dev libpq4 libsasl2 libsasl2-2 libselinux1 libsepol1 libslang2 libssp0 libstdc++6 libxml2 libxslt1.1 postfix python-apt python-central python-docutils python-gtk-1.2 python-imaging python-minimal reportbug zope-common Suggested packages: lzma libc6-dev-amd64 lib64gcc1 lib64ssp0 libfreetype6-dev lib64mudflap0 postfix-mysql postfix-pgsql postfix-ldap postfix-pcre sasl2-bin resolvconf postfix-cdb python-tk python-gdk-imlib-1.2 debconf-utils debsums dlocate python-urwid Recommended packages: libsasl2-modules The following packages will be REMOVED: glimmer idle idle-python2.3 libssp0-dev python-celementtree python-cjkcodecs python-egenix-mxtexttools python-elementtree python-imaging-tk python-ldap python-lxml python-newt python-profiler python-psyco python-reportlab python-simpletal python-xml python2.3 python2.3-apt python2.3-celementtree python2.3-cjkcodecs python2.3-clientcookie python2.3-dev python2.3-dhm python2.3-docutils python2.3-egenix-mxdatetime python2.3-egenix-mxproxy python2.3-egenix-mxqueue python2.3-egenix-mxstack python2.3-egenix-mxtexttools python2.3-egenix-mxtools python2.3-elementtree python2.3-htmltmpl python2.3-iconvcodec python2.3-imaging python2.3-imaging-tk python2.3-ldap python2.3-librdf python2.3-lxml python2.3-profiler python2.3-psyco python2.3-psycopg python2.3-reportlab python2.3-setuptools python2.3-simpletal python2.3-tk python2.3-unit python2.3-xml python2.4-imaging zope-psycopgda zope2.7 The following NEW packages will be installed: libsasl2-2 libslang2 python-central python-minimal The following packages will be upgraded: coreutils cpp-4.1 dpkg gcc-4.1 gcc-4.1-base libfreetype6 libgcc1 libgpg-error0 libmudflap0 libmudflap0-dev libpq4 libsasl2 libselinux1 libsepol1 libssp0 libstdc++6 libxml2 libxslt1.1 postfix python python-apt python-docutils python-gtk-1.2 python-imaging reportbug zope-common 26 upgraded, 4 newly installed, 51 to remove and 440 not upgraded. Regards. -- == | FRÉDÉRIC MASSOT | | http://www.juliana-multimedia.com | | mailto:[EMAIL PROTECTED] | ===Debian=GNU/Linux===
Bug#411841: debian-installer: 4th partition cannot be primary
Package: debian-installer Version: 20061102 I'm auto-installing some servers with debian-installer. I'm creating 4 partitions, which all should be primary. I'm using this config: d-i partman-auto/expert_recipe string \ boot-root :: \ 4000 1 4000 linux-swap \ $primary{ } method{ swap } format{ } \ .\ 8000 1 8000 reiserfs \ $primary{ } method{ format } format{ } \ use_filesystem{ } filesystem{ reiserfs } \ mountpoint{ / } \ .\ 6000 1 6000 reiserfs \ $primary{ } method{ format } format{ } \ use_filesystem{ } filesystem{ reiserfs } \ mountpoint{ /var/log }\ .\ 6000 1 10 reiserfs \ $primary{ } method{ format } format{ } \ use_filesystem{ } filesystem{ reiserfs } \ mountpoint{ /var/backup }\ . But debian-installer creates the last partition as extended. I have to manually delete it and recrate it as primary. IMHO, debian-installer should only make the 4th partition extended if there is a 5th partition This is on Etch's debian-installer, as of 20061102. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411842: bind9: rndc misses file LC_MESSAGES/libisc.cat
Package: bind9 Version: 1:9.3.4-2 Severity: normal When trying to do rndc freeze on a zone, rndc dies with this error message: rndc: 'freeze' failed: not found When stracing, it seems that rndc does not find the file libisc.cat, like this: open(/usr/share/locale/en/libisccc.cat, O_RDONLY) = -1 ENOENT (No such file or directory) open(/usr/share/locale/en/LC_MESSAGES/libisccc.cat, O_RDONLY) = -1 ENOENT (No such file or directory) open(/usr/share/locale/en/libisccc.cat, O_RDONLY) = -1 ENOENT (No such file or directory) open(/usr/share/locale/en/LC_MESSAGES/libisccc.cat, O_RDONLY) = -1 ENOENT (No such file or directory) futex(0xb7f08a18, FUTEX_WAKE, 2147483647) = 0 open(/usr/share/locale/en/libisc.cat, O_RDONLY) = -1 ENOENT (No such file or directory) open(/usr/share/locale/en/LC_MESSAGES/libisc.cat, O_RDONLY) = -1 ENOENT (No such file or directory) open(/usr/share/locale/en/libisc.cat, O_RDONLY) = -1 ENOENT (No such file or directory) open(/usr/share/locale/en/LC_MESSAGES/libisc.cat, O_RDONLY) = -1 ENOENT (No such file or directory) futex(0xb7c83f3c, FUTEX_WAKE, 2147483647) = 0 futex(0xb7c83f5c, FUTEX_WAKE, 2147483647) = 0 futex(0xb7f08a1c, FUTEX_WAKE, 2147483647) = 0 rt_sigaction(SIGHUP, {0xb7c682ea, ~[RTMIN RT_1], 0}, NULL, 8) = 0 rt_sigsuspend([]rndc: 'freeze' failed: not found unfinished ... ... -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (990, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.13.2 Locale: LANG=en, LC_CTYPE=sv_SE (charmap=UTF-8) (ignored: LC_ALL set to en_US.UTF-8) Versions of packages bind9 depends on: ii adduser 3.102Add and remove users and groups ii libbind9-0 1:9.3.4-2BIND9 Shared Library used by BIND ii libc6 2.3.6.ds1-12 GNU C Library: Shared libraries ii libdns221:9.3.4-2DNS Shared Library used by BIND ii libisc111:9.3.4-2ISC Shared Library used by BIND ii libisccc0 1:9.3.4-2Command Channel Library used by BI ii libisccfg1 1:9.3.4-2Config File Handling Library used ii liblwres9 1:9.3.4-2Lightweight Resolver Library used ii libssl0.9.8 0.9.8c-4 SSL shared libraries ii lsb-base3.1-23 Linux Standard Base 3.1 init scrip ii netbase 4.29 Basic TCP/IP networking system bind9 recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411319: Vedr. Re: Bug#411319: Vedr. Re: Bug#411319: Hang at Creating device files
Hi I included the logs in a previous post, now I also tried to do another install using the daily image: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/debian-testing-i386-netinst.iso (Date: Feb 20th). Verified MD5 sum, wrote to CD with verification, same hang on 73%, downloading cryptsetup and dmcrypt. Also made another non-crypto install, works fine. AFAIK these should be be on the CD anyway, certainly the full CD1 image I downloaded last time. I also verified from the console that wget works, so even if it tried using a Debian mirror, it should still work. Regards, Kjell Rune --- David Härdeman [EMAIL PROTECTED] skrev: Could be a number of things, but faulty installation media, network problems and debconf prompts have been the most common ones that I've seen so far. I did a full installation yesterday which went smoothly, so I suspect a non-cryptsetup and non-debconf prompt related problem. Could you perhaps try a new install using a newly downloaded image just to rule out any such issues? _ Alt i én. Få Yahoo! Mail med adressekartotek, kalender og notisblokk. http://no.mail.yahoo.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#408091: [EMAIL PROTECTED]: Re: Bug#400112: [PROPOSAL] forbid source/binary package name conflicts]
This mail went to 408901 instead of 408091. - Forwarded message from Roger Leigh [EMAIL PROTECTED] - From: Roger Leigh [EMAIL PROTECTED] To: Lucas Nussbaum [EMAIL PROTECTED] Cc: Goswin von Brederlow [EMAIL PROTECTED], Kurt Roeckx [EMAIL PROTECTED], [EMAIL PROTECTED] Date: Sat, 3 Feb 2007 22:21:58 + Subject: Re: Bug#400112: [PROPOSAL] forbid source/binary package name conflicts On Tue, Jan 23, 2007 at 01:57:19PM +0100, Lucas Nussbaum wrote: On 19/01/07 at 12:47 +0100, Goswin von Brederlow wrote: Kurt Roeckx [EMAIL PROTECTED] writes: On Thu, Jan 18, 2007 at 03:12:12PM +0100, Goswin von Brederlow wrote: In the initial report you mentioned that sbuild has a problem with confusing names like this. Afaik sbuild solely works on source package name and version and that is always unique. Where do you get a conflict? It uses apt-cache to check for available versions, which as you show gives both results. And sbuild's behaviour depends on the order apt-cache returns those. Reading the source sbuild is prepared to parse multiple returns from apt-cache just fine. But it ignores the package name and only uses the version to keep them apart. So a case that would screw up sbuild would have to look something like this: Package: foo Binary: bar, foo Version: 1.2-3 Package: bar Binary: bar Version: 1.2-3 Too bad apt-cache doesn't have a --only-source option. Sbuild has to use package name and version. Something like this (untested): Line 424... while( PIPE ) { + $package = $1 if /^Package:\s+(\S+)\s*$/mi; $ver = $1 if /^Version:\s+(\S+)\s*$/mi; $tfile = $1 if /^Files:\s*\n((\s+.*\s*\n)+)/mi; } - if (defined $ver defined $tfile) { + if (defined $package defined $ver defined $tfile) { - @{$entries{$ver}} = map { (split( /\s+/, $_ ))[3] } + @{$entries{$package $ver}} = map { (split( /\s+/, $_ ))[3] } split( \n, $tfile ); } else { print PLOG apt-cache returned no information about $pkg source\n; print PLOG Are there any deb-src lines in your /etc/apt/sources.list?\n; return (ERROR); } } close( PIPE ); if ($?) { print PLOG $conf::apt_cache failed\n; return (ERROR); } -if (!defined($entries{$version})) { +if (!defined($entries{$pkg $version})) { I have attached a tested version of this patch which fixes a bug in the while loop. This applies to the current SVN version of sbuild: svn://svn.debian.org/svn/buildd-tools/trunk/sbuild but will also apply to the testing/unstable version. But I don't yet see a problem here. The apt-cache check is purely informational. As long as it finds an entry with the right version it is happy and the apt-get --only-source source below that will always do the right thing. So the worst you get is that the Can't find source message is skipped and apt-get fails. Or not? No, the problem is that sbuild only keeps the *last* version it sees (see the while (PIPE) loop above). Anyway, that part is clearly an sbuild problem. See that log, after asking sbuild to build qd 2.1.200-1: Build started at 20070103-0339 ** Checking available source versions... Checking available source versions... Can't find source for qd_2.1.200-1 (only different version(s) 1.0.0-rc2-5 found) % sbuild -s -A qd_2.1.200-1 works for me, but I can't build kfolding: % sbuild -s -A kfolding_1.0.0-rc2-5 Automatic build of kfolding_1.0.0-rc2-5 on hardknott by sbuild/powerpc 0.52 Build started at 20070203-2218 ** Checking available source versions... apt-cache returned no information about kfolding source Are there any deb-src lines in your /etc/apt/sources.list? ** Finished at 20070203-2218 Build needed 00:00:00, 0k disk space This is without the above patch applied. After applying the patch, I get: Automatic build of kfolding_1.0.0-rc2-5 on hardknott by sbuild/powerpc 0.52 Build started at 20070203-2219 ** Checking available source
Bug#409434: Upgrade
Le vendredi 16 février 2007 21:47, Frank Küster a écrit : Yes we could just remove the link and add a file like README.mediawiki or any other name in which we just explain where the user can find the confile... Indeed, that would propably be enought to close the two other bug for a small amount of change this time. Alternatively, you could just as well fix it. I have never used mediawiki before, but I gave it a try. It works very well with a symlink in the other direction and LocalSettings.php in /etc/mediawiki1.7/, conforming with policy. The only change that needs to be made is that $IP must be set to /var/lib/mediawiki1.7 in /etc/mediawiki1.7/LocalSettings.php For packaging the following changes need to be made: - mediawiki.1.7.links changed - the instructions in config/index.php and README.Debian must be changed to reflect the new location, - the same needs to be done with AdminSettings.php (and it's handling in postinst and config must be rewritten). All nothing that requires magic. Exept that you forgot to mention how you will modify the configuration file to change the $IP in /etc/mediawiki1.7/LocalSettings.php And also how you will handle the move from /var/lib/mediawiki1.7 to /etc/mediawiki1.7: with or without notifing the administrator ? Then of course it needs a debconf warning. Romain
Bug#408091: [EMAIL PROTECTED]: Re: Bug#400112: [PROPOSAL] forbid source/binary package name conflicts]
This mail never went to 408091 - Forwarded message from Roger Leigh [EMAIL PROTECTED] - From: Roger Leigh [EMAIL PROTECTED] To: Goswin von Brederlow [EMAIL PROTECTED] Cc: Kurt Roeckx [EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED] Lucas Nussbaum [EMAIL PROTECTED] Date: Sat, 10 Feb 2007 19:52:25 + Subject: Re: Bug#400112: [PROPOSAL] forbid source/binary package name conflicts User-Agent: Mutt/1.5.13 (2006-08-11) On Fri, Jan 19, 2007 at 12:47:41PM +0100, Goswin von Brederlow wrote: Reading the source sbuild is prepared to parse multiple returns from apt-cache just fine. But it ignores the package name and only uses the version to keep them apart. So a case that would screw up sbuild would have to look something like this: Package: foo Binary: bar, foo Version: 1.2-3 Package: bar Binary: bar Version: 1.2-3 Too bad apt-cache doesn't have a --only-source option. Sbuild has to use package name and version. Something like this (untested): I reworked your patch, and the result is attached. This has been committed upstream as revision 1085. You can get the current sbuild with: svn co svn://svn.debian.org/svn/buildd-tools/trunk/sbuild But I don't yet see a problem here. The apt-cache check is purely informational. As long as it finds an entry with the right version it is happy and the apt-get --only-source source below that will always do the right thing. So the worst you get is that the Can't find source message is skipped and apt-get fails. Or not? With or without the patch applied, sbuild qd_2.1.200-1 succeeds and sbuild kfolding_1.0.0-rc2-5 fails. I haven't yet found out why. Thanks for the patch you proposed, which I have applied in a modified (working and debugged) form. If you have any further ideas about why kfolding won't build, I'll be happy to investigate further :) Regards, Roger -- .''`. Roger Leigh : :' : Debian GNU/Linux http://people.debian.org/~rleigh/ `. `' Printing on GNU/Linux? http://gutenprint.sourceforge.net/ `-GPG Public Key: 0x25BFB848 Please GPG sign your mail. Index: sbuild === --- sbuild (revision 1084) +++ sbuild (working copy) @@ -427,20 +427,28 @@ } { local($/) = ; + my $package; my $ver; my $tfile; while( PIPE ) { + $package = $1 if /^Package:\s+(\S+)\s*$/mi; $ver = $1 if /^Version:\s+(\S+)\s*$/mi; $tfile = $1 if /^Files:\s*\n((\s+.*\s*\n)+)/mi; - if (defined $ver defined $tfile) { - @{$entries{$ver}} = map { (split( /\s+/, $_ ))[3] } + if (defined $package defined $ver defined $tfile) { + @{$entries{$package $ver}} = map { (split( /\s+/, $_ ))[3] } split( \n, $tfile ); - } else { - print PLOG $conf::apt_cache returned no information about $pkg source\n; - print PLOG Are there any deb-src lines in your /etc/apt/sources.list?\n; - return (ERROR); + undef($package); + undef($ver); + undef($tfile); } } + + if (! scalar keys %entries) { + print PLOG $conf::apt_cache returned no information about $pkg source\n; + print PLOG Are there any deb-src lines in your /etc/apt/sources.list?\n; + return (ERROR); + + } } close(PIPE); waitpid $pid, 0; @@ -449,7 +457,7 @@ return (ERROR); } - if (!defined($entries{$version})) { + if (!defined($entries{$pkg $version})) { if (!$retried) { # try to update apt's cache if nothing found run_apt_command($conf::apt_get, update /dev/null, root, 0); @@ -464,7 +472,7 @@ } print PLOG Fetching source files...\n;
Bug#411827: kcalc: package dependencies problem
On Wednesday 21 February 2007, Max Dmitrichenko wrote: Package: kcalc Version: 4:3.5.5-3 Severity: important kcalc depends on libgmp3c2 package but it's not on kcalc's dependency list. Architecture: sparc (sparc64) Thanks for your report (I have upgraded it to serious) entire kdeutils has gotten none of the depends it should on sparc. I think I have asked for a rebuild in order to fix it. /Sune -- I cannot get access over a code, how does it work? The point is that from Windows and from the control folder within Photoshop 5.2 you can't turn off a head over the 4-bit floppy disk on the button for enabling a controller to a pin. pgpB9O2WGZrZA.pgp Description: PGP signature
Bug#408506: alsa-utils: Tries /dev/snd/controlC0, but only /dev/controlC0 exists
On Mon, Feb 19, 2007 at 07:35:32PM +0100, Elimar Riesebieter wrote: On Mon, 19 Feb 2007 the mental interface of Lionel Elie Mamane told: Then I upgraded the rest of my system to sid, compiled a kernel from linux-2.6.18 version 2.6.18.dfsg.1-10, rebooted in it and the problem reappeared. No /dev/snd. So where should we start? This is unreproducible for me and as of you I would doublecheck the kernel config. I don't see anything strange sound-related in there. Here's the config file. Are the correct drivers build, Irrespective on whether the drivers are the correct ones for my hardware, creating the sound devices in the wrong location is a bug. And when I do cd /dev; ln -s . snd, sound works, so I'm using adequate, if maybe not correct drivers. should I try alsa-source 1.0.14~rc1 from experimental (which in case of your soundcard I would prefer) OK, I'll do that. If that solved the problem, maybe we should push the specific fix to the etch kernel? and else. There are no symptoms which show me a bug in alsa-utils though. I filed it under alsa-utils because it contains /lib/udev/alsa-utils and /etc/udev/alsa-utils.rules, which my limited knowledge of kernel / udev communication indicates may be deciding the name and location of the devices. FYI, /etc/udev/alsa-utils.rules builds the devices only in case the kernel provides drivers ;) I don't understand the intended effect of that remark. /etc/udev/alsa-utils.rules doesn't on purpose misplace the devices if the wrong kernel driver for the hardware was loaded (but the kernel driver thinks it is the right one, as it loaded successfully), does it? -- Lionel # # Automatically generated make config: don't edit # Linux kernel version: 2.6.18+dfsg.1-10+64bit # Mon Feb 19 16:23:51 2007 # CONFIG_X86_64=y CONFIG_64BIT=y CONFIG_X86=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_CMPXCHG=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y CONFIG_AUDIT_ARCH=y CONFIG_DEFCONFIG_LIST=/lib/modules/$UNAME_RELEASE/.config # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION= CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE= # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y # # Block layer # CONFIG_LBD=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_LSF=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=m CONFIG_IOSCHED_DEADLINE=m CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED=cfq # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_VSMP is not set CONFIG_MK8=y # CONFIG_MPSC is not set # CONFIG_GENERIC_CPU is not set CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_TSC=y CONFIG_X86_GOOD_APIC=y # CONFIG_MICROCODE is not set CONFIG_X86_MSR=m CONFIG_X86_CPUID=m CONFIG_X86_IO_APIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_MTRR=y # CONFIG_SMP is not set # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_MEMORY_PROBE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_EXTREME=y CONFIG_MEMORY_HOTPLUG=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_HPET_TIMER=y CONFIG_IOMMU=y CONFIG_CALGARY_IOMMU=y CONFIG_SWIOTLB=y CONFIG_X86_MCE=y # CONFIG_X86_MCE_INTEL is not set CONFIG_X86_MCE_AMD=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x20 CONFIG_SECCOMP=y # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_REORDER=y CONFIG_K8_NB=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y
Bug#401830: Smalls gifs fail to be rendered in text window
Hi, This bug has been fixed upstream in gnochm 0.9.9. However, since etch is frozen I plan to do an NMU with a one line patch to fix only this bug. Please let me know if you have any concerns. Ganesan -- Ganesan Rajagopal signature.asc Description: Digital signature
Bug#411657: Transition from sarge-etch for zope packages
Hello all, I need some help to find a fix for #411657. The problem is that sarge included the zope2.7 package which requires python2.3, but python2.3 will not be shipped with etch and the current python package conflicts with it. Matthias uploaded zope-common 0.5.31 with the following change: * debian/control: Depend on the unversioned python package. Which means that zope-common now depends on python (= 2.4) instead of python2.4. After this change, upgrading from sarge to etch means that the sarge version of python2.3 will be uninstalled as well as zope2.7, which I would like to avoid. It will be common for our users to upgrade from sarge to etch with sites running zope2.7, and it would be a good thing to let them run both in order to manually upgrade their instances. See here: $ apt-cache show python | grep Conflicts Conflicts: python2.3 ( 2.3.5-14), python2.1 (= 2.1.2), python-xmlbase, python-csv, python-bz2, python-base, python-central ( 0.5.5) I think that changing the dependency on zope-common to something like: Depends: python (= 2.4) | python2.4, ... would do the trick, leaving the old python package around without removing python2.3, but I'm not even sure and to say the truth I do not understand why the dependency on python2.4 has been replaced with python (= 2.4). Any idea? Thanks in advance, -- Fabio Tranchitella http://www.kobold.it Free Software Developer and Consultant http://www.tranchitella.it _ 1024D/7F961564, fpr 5465 6E69 E559 6466 BF3D 9F01 2BF8 EE2B 7F96 1564 signature.asc Description: Digital signature
Bug#411844: sendfile: FTBFS: dpkg-source: unrepresentable changes to source
Package: sendfile Version: 2.1b-3 Severity: serious Justification: FTBFS on i386, very likely to fail everywhere else Usertags: grid5000 rebuild Hi, During a rebuild of all packages in etch, I discovered that your package failed to build on i386. Relevant parts: dpkg-source -b sendfile-2.1b dpkg-source: building sendfile using existing sendfile_2.1b.orig.tar.gz dpkg-source: building sendfile in sendfile_2.1b-3.diff.gz dpkg-source: cannot represent change to doc/NEWS: dpkg-source: new version is symlink dpkg-source: old version is something else dpkg-source: building sendfile in sendfile_2.1b-3.dsc dpkg-source: unrepresentable changes to source The full build log is available from http://people.debian.org/~lucas/logs/2007/02/20/ About the archive rebuilt: The rebuilt was done on about 50 AMD64 nodes of the Grid'5000 platform, using a clean chroot containing an etch i386 environment (not unstable). Internet was not accessible from the build systems. The builds were processed as root. About Grid'5000: Grid'5000 is an highly reconfigurable experimental Grid platform gathering 9 sites and featuring a total of 5000 CPUs. It serves as a testbed for research in Grid Computing. See https://www.grid5000.fr/ -- | Lucas Nussbaum | [EMAIL PROTECTED] http://www.lucas-nussbaum.net/ | | jabber: [EMAIL PROTECTED] GPG: 1024D/023B3F4F | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411843: drscheme: FTBFS: du: `./usr/share/plt/doc/doc-license.txt': Not a directory
Package: drscheme Version: 1:352-6 Severity: serious Justification: FTBFS on i386, very likely to fail everywhere else Usertags: grid5000 rebuild Hi, During a rebuild of all packages in etch, I discovered that your package failed to build on i386. Relevant parts: dh_link -pdrscheme Can't cd to (debian/drscheme/usr/share/plt/doc/) doc-license.txt: Not a directory at /usr/bin/dh_link line 160 dh_installdocs -pmzscheme dh_installexamples -pmzscheme dh_installman -pmzscheme dh_installinfo -pmzscheme dh_installmenu -pmzscheme dh_installcron -pmzscheme dh_installinit -pmzscheme dh_installdebconf -pmzscheme dh_installemacsen -pmzscheme dh_installcatalogs -pmzscheme dh_installpam -pmzscheme dh_installlogrotate -pmzscheme dh_installlogcheck -pmzscheme dh_installmime -pmzscheme dh_installchangelogs -pmzscheme dh_installudev -pmzscheme dh_install -pmzscheme dh_link -pmzscheme dh_strip -pdrscheme Can't cd to (debian/drscheme/usr/share/plt/doc/) doc-license.txt: Not a directory at /usr/bin/dh_strip line 192 dh_compress -pdrscheme dh_fixperms -pdrscheme dh_makeshlibs -pdrscheme dh_strip -pmzscheme dh_compress -pmzscheme dh_fixperms -pmzscheme dh_makeshlibs -pmzscheme dh_installdeb -pdrscheme dh_perl -pdrscheme Can't cd to (debian/drscheme/usr/share/plt/doc/) doc-license.txt: Not a directory at /usr/bin/dh_perl line 116 dh_shlibdeps -pdrscheme couldn't open /etc/ld.so.conf: No such file or directory at /usr/bin/dpkg-shlibdeps line 155. dh_installdeb -pmzscheme dh_perl -pmzscheme dh_shlibdeps -pmzscheme couldn't open /etc/ld.so.conf: No such file or directory at /usr/bin/dpkg-shlibdeps line 155. dh_gencontrol -pdrscheme du: `./usr/share/plt/doc/doc-license.txt': Not a directory dpkg-gencontrol: failure: du in `debian/drscheme' gave error exit status 1 dh_gencontrol: command returned error code 256 make: *** [binary-makedeb-IMPL/drscheme] Error 1 This doesn't happen during every build: I built it three times, and it failed twice. The full build log is available from http://people.debian.org/~lucas/logs/2007/02/20/ About the archive rebuilt: The rebuilt was done on about 50 AMD64 nodes of the Grid'5000 platform, using a clean chroot containing an etch i386 environment (not unstable). Internet was not accessible from the build systems. The builds were processed as root. About Grid'5000: Grid'5000 is an highly reconfigurable experimental Grid platform gathering 9 sites and featuring a total of 5000 CPUs. It serves as a testbed for research in Grid Computing. See https://www.grid5000.fr/ -- | Lucas Nussbaum | [EMAIL PROTECTED] http://www.lucas-nussbaum.net/ | | jabber: [EMAIL PROTECTED] GPG: 1024D/023B3F4F | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411845: qps: FTBFS: dpkg-source: unrepresentable changes to source
Package: qps Version: 1.9.18.6-1 Severity: serious Justification: FTBFS on i386, very likely to fail everywhere else Usertags: grid5000 rebuild Hi, During a rebuild of all packages in etch, I discovered that your package failed to build on i386. Relevant parts: dpkg-source -b qps-1.9.18.6 dpkg-source: building qps using existing qps_1.9.18.6.orig.tar.gz dpkg-source: building qps in qps_1.9.18.6-1.diff.gz dpkg-source: cannot represent change to proc.cpp: dpkg-source: new version is symlink dpkg-source: old version is nonexistent dpkg-source: warning: file debian/dirs has no final newline (either original or modified version) dpkg-source: warning: ignoring deletion of file Makefile dpkg-source: warning: ignoring deletion of file build-stamp dpkg-source: building qps in qps_1.9.18.6-1.dsc dpkg-source: unrepresentable changes to source The full build log is available from http://people.debian.org/~lucas/logs/2007/02/20/ About the archive rebuilt: The rebuilt was done on about 50 AMD64 nodes of the Grid'5000 platform, using a clean chroot containing an etch i386 environment (not unstable). Internet was not accessible from the build systems. The builds were processed as root. About Grid'5000: Grid'5000 is an highly reconfigurable experimental Grid platform gathering 9 sites and featuring a total of 5000 CPUs. It serves as a testbed for research in Grid Computing. See https://www.grid5000.fr/ -- | Lucas Nussbaum | [EMAIL PROTECTED] http://www.lucas-nussbaum.net/ | | jabber: [EMAIL PROTECTED] GPG: 1024D/023B3F4F | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#410174: Message apparrently emitted by libao
reassign 410174 libao thanks Please ignore the bad attitude, programs spitting out unwanted text into my terminal applications make me seriously cranky. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#389068: FTBFS: package does use included precompiled libraries for build
Suggestion: please apply the BTS block command to the ITP's you filed, so others can easily see where work is needed. (And use the help tag if you need it.) pgpCOAxEUDWd0.pgp Description: PGP signature
Bug#411847: webalizer: safe state dumping
Package: webalizer Severity: wishlist Tags: patch upstream I've had very serious issues with webalizer truncating history and state files to 0. There is currently a time frame between fopen and the actual state writing during which a segfault or the likes would result in severe corruption. I've made this patch to create a temporary *.new file and only replace the old ones when we're finished generating them. Already sent to upstream. -- Robert Millan ACK STORM, S.L. - http://www.ackstorm.es/ diff -ur webalizer-2.01.10.old/preserve.c webalizer-2.01.10/preserve.c --- webalizer-2.01.10.old/preserve.c 2001-10-24 08:22:42.0 +0200 +++ webalizer-2.01.10/preserve.c 2007-02-20 13:59:19.0 +0100 @@ -141,8 +141,10 @@ { int i; FILE *hist_fp; + char *tmp; - hist_fp = fopen(hist_fname,w); + asprintf (tmp, %s.new, hist_fname); + hist_fp = fopen(tmp,w); if (hist_fp) { @@ -165,10 +167,14 @@ } } fclose(hist_fp); + if ((rename (tmp,hist_fname) == -1) verbose) +fprintf(stderr,Failed renaming %s to %s\n,tmp,hist_fname); } else if (verbose) fprintf(stderr,%s %s\n,msg_hist_err,hist_fname); + + free(tmp); } /*/ @@ -186,11 +192,14 @@ FILE *fp; int i; + char *tmp; char buffer[BUFSIZE]; /* Open data file for write */ - fp=fopen(state_fname,w); + asprintf(tmp, %s.new, state_fname); + fp=fopen(tmp,w); + free(tmp); if (fp==NULL) return 1; /* Saving current run data... */ @@ -382,6 +391,16 @@ if (fputs(# End Of Table - usernames\n,fp)==EOF) return 1; fclose(fp); /* close data file...*/ + + asprintf(tmp, %s.new, state_fname); + if ((rename (tmp,state_fname) == -1) verbose) + { + fprintf(stderr,Failed renaming %s to %s\n,tmp,state_fname); + free(tmp); + return 1; + } + free(tmp); + return 0;/* successful, return with good return code */ }
Bug#409434: Upgrade
Hi Romain, hi release team, maybe I really missed something, but let's discuss this. Would the approach I suggest below be okay for the release team? Romain Beauxis [EMAIL PROTECTED] wrote: Alternatively, you could just as well fix it. [...] All nothing that requires magic. Exept that you forgot to mention how you will modify the configuration file to change the $IP in /etc/mediawiki1.7/LocalSettings.php I don't see the problem here. Currently with the file being in /var/lib/mediawiki1.7, the file is created by the local admin and moved to its place. He can as well move it to /etc/mediawiki1.7, and the package or its maintainer scripts need not care about it in the future. And also how you will handle the move from /var/lib/mediawiki1.7 to /etc/mediawiki1.7: with or without notifing the administrator ? Then of course it needs a debconf warning. This is in fact a problem. Let's look at the cases: a) Default install, symlink from /etc/mediawiki1.7/ to /var/... In this case we can just move the file from /var to /etc if it exists and do nothing if it doesn't (for both files). This would be done in preinst, so that we can ship the symlink in the new deb. b) The symlink is removed Literally, Policy requires us to respect local configuration changes including file removals. However, I'd argue that removing the old, buggy symlink is not a configuration change (it didn't change anything), and I would move existing files from /var to /etc without a debconf note (i.e. handle this case like a default install). c) There is a real file instead of the symlink Subcase 1) No file in /var no problem here, the preinst does nothing and the symlink from the deb is installed (probably it's already there, but I think dpkg will not complain). Suddenly the wiki will work; I don't think this needs a debconf note. Subcase 2) also a file in /var This means that there is both a configuration file that is actually used and one that the admin obviously intended to be used. In this case I would say the preinst should take a diff of the files and just remove the one in /var if they are the same. If they are not, it could move the file from /var to /etc/mediawiki1.7/LocalSettings.php.moved-from-var. The config script would check for the existence of that file and if it finds it, ask which one to use (and the postinst would act accordingly). Plus a NEWS.Debian explaining the changes. To me that looks a bit more complicated than one would like, but still quite manageable, and acceptable for fixing a RC bug in etch. What do you think? Regards, Frank -- Dr. Frank Küster Single Molecule Spectroscopy, Protein Folding @ Inst. f. Biochemie, Univ. Zürich Debian Developer (teTeX/TeXLive)
Bug#398464: Changes to /etc/crypttab
Hello, there was only one line missing in /etc/crypttab to enable booting: mdx_crypt /dev/mdx none luks,cipher=aes-cbc-essiv:sha256 I used the netinst CD from 20070219. Ciao, Mario -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411846: firehol: Out-of-date MSN port
Package: firehol Severity: normal The msn service has the wrong port: as in /etc/services (under msnp, so perhaps it would also be a good idea to rename the MSN service from msn to msnp) the port is currently 1863. I noticed this because using gaim to connect to MSN didn't work when I allowed the msn service, which uses port 6891, but when I changed the port to 1863, it worked fine. -- System Information: Debian Release: 4.0 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-3-686 Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#409383: This bug may be a feature?
Given that the various servers in a round-robin have no guarantee to be in sync, insisting on always accessing the same ip address may avoid a number of problem during an update run. Of course, I don't think there should be published dns round-robins which can get out of sync. Round-robin suggests the servers are equivalent, and around 4 hours out of the day, they usually aren't. So I'm not really sure what the right response to this is, but it's not necessarily a simple patch. -josh -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#403933: More success with r2085
As another data point I've recently upgraded to the 0.9.2+r2085.20070207-1 madwifi source package and this appears to be much happier with network-manager on non encrypted, WEP and WPA networks. J. -- I don't sleep, I dream. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411848: buildbot: SVNPoller fails if DNS is down
Package: buildbot Version: 0.7.5-1 Severity: normal On a desktop computer, I set up a buildbot master configuration. It triggers new builds at each SVN commit with the help of the SVNPoller component. On 19 feb, I did some setup/reorganisation on the DNS server that this machine use. The effect has been that the DNS was unavailable a few hours. I just discovered that since this event, SVNPoller has crashed and SVN commit were not tracked anymore. In buildbot log, I can see : 2007/02/19 00:32 CET [-] SVNPoller polling 2007/02/19 00:32 CET [-] svnPoller: _process_changes last 723 mostRecent 723 2007/02/19 00:32 CET [-] svnPoller: _process_changes 723 .. 723 2007/02/19 00:32 CET [-] SVNPoller finished polling 2007/02/19 00:32 CET [-] _finished : None 2007/02/19 00:42 CET [-] SVNPoller polling 2007/02/19 00:44 CET [-] SVNPoller finished polling 2007/02/19 00:44 CET [-] _finished : [Failure instance: Traceback (failure with no frames): exceptions.IOError: got stderr: svn: Unknown hostname 'svn.gforge.inria.fr'\n ] 2007/02/19 00:44 CET [-] Unhandled error in Deferred: 2007/02/19 00:44 CET [-] Traceback (most recent call last): Failure: exceptions.IOError: got stderr: svn: Unknown hostname 'svn.gforge.inria.fr'\n And then, nothing more related with SVNPoller... where as buildbot master still run (and I still get the status page and the nightly builds I set up). It would be good if DNS error does not lead to the end of the SVNPoller component. Or at lease, such an error was printed on the status web page... Best regards, Vincent -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (990, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-4-686 Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Versions of packages buildbot depends on: ii adduser 3.102 Add and remove users and groups ii python2.4.4-2An interactive high-level object-o ii python-central0.5.12 register and build utility for Pyt ii python-twisted-core 2.4.0-3Event-based framework for internet ii python-twisted-mail 0.3.0-1An SMTP, IMAP and POP protocol imp ii python-twisted-web0.6.0-1An HTTP protocol implementation to ii python-twisted-words 0.4.0-2.1 Chat and Instant Messaging buildbot recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411849: rdiff-backup: OSError raised when transgressing unreadable directory on *destination*
Package: rdiff-backup Version: 1.1.5-4 Severity: normal The following error occurred during today's rdiff-backup (running with euid localbackup, command was rdiff-backup [EMAIL PROTECTED]::/cygdrive/. /var/local/backups/ls2buero/.) from a Cygwin box (source) to a Debian box (destination). snip Exception '[Errno 13] Permission denied: '/var/local/backups/ls2buero/c/WINNT/$hf_mig$/KB915865/update'' raised of class 'exceptions.OSError': File /var/lib/python-support/python2.4/rdiff_backup/Main.py, line 295, in error_check_Main try: Main(arglist) File /var/lib/python-support/python2.4/rdiff_backup/Main.py, line 315, in Main take_action(rps) File /var/lib/python-support/python2.4/rdiff_backup/Main.py, line 271, in take_action elif action == backup: Backup(rps[0], rps[1]) File /var/lib/python-support/python2.4/rdiff_backup/Main.py, line 334, in Backup backup.Mirror_and_increment(rpin, rpout, incdir) File /var/lib/python-support/python2.4/rdiff_backup/backup.py, line 51, in Mirror_and_increment DestS.patch_and_increment(dest_rpath, source_diffiter, inc_rpath) File /var/lib/python-support/python2.4/rdiff_backup/backup.py, line 231, in patch_and_increment cls.CCPP.close() File /var/lib/python-support/python2.4/rdiff_backup/backup.py, line 475, in close dir_rp.chmod(perms) File /var/lib/python-support/python2.4/rdiff_backup/rpath.py, line 826, in chmod self.conn.os.chmod(self.path, permissions Globals.permission_mask) Traceback (most recent call last): File /usr/bin/rdiff-backup, line 23, in ? rdiff_backup.Main.error_check_Main(sys.argv[1:]) File /var/lib/python-support/python2.4/rdiff_backup/Main.py, line 295, in error_check_Main try: Main(arglist) File /var/lib/python-support/python2.4/rdiff_backup/Main.py, line 315, in Main take_action(rps) File /var/lib/python-support/python2.4/rdiff_backup/Main.py, line 271, in take_action elif action == backup: Backup(rps[0], rps[1]) File /var/lib/python-support/python2.4/rdiff_backup/Main.py, line 334, in Backup backup.Mirror_and_increment(rpin, rpout, incdir) File /var/lib/python-support/python2.4/rdiff_backup/backup.py, line 51, in Mirror_and_increment DestS.patch_and_increment(dest_rpath, source_diffiter, inc_rpath) File /var/lib/python-support/python2.4/rdiff_backup/backup.py, line 231, in patch_and_increment cls.CCPP.close() File /var/lib/python-support/python2.4/rdiff_backup/backup.py, line 475, in close dir_rp.chmod(perms) File /var/lib/python-support/python2.4/rdiff_backup/rpath.py, line 826, in chmod self.conn.os.chmod(self.path, permissions Globals.permission_mask) OSError: [Errno 13] Permission denied: '/var/local/backups/ls2buero/c/WINNT/$hf_mig$/KB915865/update' Fatal Error: Lost connection to the remote system /snip Indeed, the directory /var/local/backups/ls2buero/c/WINNT/$hf_mig$/ has the pathological permissions d- 88 localbackup localbackup It was created during yesterday's backup, mirroring the permissions of the source directory on the Cygwin box. Today, rdiff-backup crashed with the above error message when transgressing said directory on the destination box. I would have expected rdiff-backup to do one of the following things: 1. Refuse to backup the unreadable directory in the first place writing an error message to the log. 2. Backup the unreadable directory and then use chmod on the backup target to check for changes/store increments during subsequent backups. Judging from the error message it seems that rdiff-backup was actually trying to do 2. (calling chmod) but made a mistake somehow. - System Information: Debian Release: 4.0 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.19-rc5-mm1 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Versions of packages rdiff-backup depends on: ii libc6 2.3.6.ds1-12 GNU C Library: Shared libraries ii librsync1 0.9.7-1 Library which implements the rsync ii python 2.4.4-2 An interactive high-level object-o ii python-support 0.5.6automated rebuilding support for p Versions of packages rdiff-backup recommends: ii python-pylibacl 0.2.2-1module for manipulating POSIX.1e A ii python-pyxattr0.2.1-1.1 module for manipulating filesystem -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#119753: hey there
[EMAIL PROTECTED] hows it goin... Go to col~llege online: ~Accounting ~Business ~Criminal~ justice ~Educ~ation ~Health ~Technology No study required 100% verifiable Call Today 206-333-1249 (7 days a week, 24 hoursy a day) Chat Soon Cassie Hightower maxine cub skulk pluto cottonseed millennia elephant burglar furnish criminal scoria cousin anne yucca californium revise wisdom certain larsen exhibit electrocardiogram incombustible sip burden emergent aching chuff cardiod bout -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411851: slmodemd not restarted on resume
Package: sl-modem-daemon, uswsusp Version: 2.9.9d+e-pre2-8, 0.6~cvs20070202-1 Severity: normal Hi, Sorry, I don't know which program is at fault. When resuming from both suspend-to-ram and suspend-to-disk, slmodemd is not active any more: # /etc/init.d/sl-modem-daemon status Status of SmartLink modem daemon: slmodemd is not running but /var/run/slmodemd.pid exists. This makes it impossible to use my modem. Restarting slmodemd manually does fix the problem. Cheers, Julien -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (500, 'unstable'), (10, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-4-686 Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Versions of packages sl-modem-daemon depends on: ii debconf [debconf-2.0] 1.5.11 Debian configuration management sy ii libasound2 1.0.13-1 ALSA library ii libc6 2.3.6.ds1-12 GNU C Library: Shared libraries sl-modem-daemon recommends no packages. Versions of packages uswsusp depends on: ii debconf [debconf-2.0] 1.5.11 Debian configuration management sy ii libc6 2.3.6.ds1-12 GNU C Library: Shared libraries ii libgcc1 1:4.1.1-21 GCC support library ii libgcrypt11 1.2.3-2 LGPL Crypto library - runtime libr ii libgpg-error0 1.4-2library for common error values an ii libsplashy0 0.3.2Library to draw splash screen on b ii zlib1g 1:1.2.3-13 compression library - runtime Versions of packages uswsusp recommends: ii initramfs-tools 0.85e tools for generating an initramfs ii mount 2.12r-18 Tools for mounting and manipulatin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411852: quodlibet hangs if dbus is restarted
Package: quodlibet Version: 0.23.1-1 Severity: normal It would be nice if quodlibet would survive a DBus restart instead of having to be killed with -9. -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-4-686 Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Versions of packages quodlibet depends on: ii exfalso 0.23.1-1 audio tag editor for GTK+ ii gstreamer0.10-plugins-base0.10.11-3 GStreamer plugins from the base ii gstreamer0.10-plugins-good0.10.5-4 GStreamer plugins from the good ii gstreamer0.10-plugins-ugly0.10.5-1 GStreamer plugins from the ugly ii python2.4.4-2An interactive high-level object-o ii python-central0.5.12 register and build utility for Pyt ii python-gst0.100.10.6.3-1 generic media-playing framework (P Versions of packages quodlibet recommends: ii gstreamer0.10-alsa0.10.11-3 GStreamer plugin for ALSA ii gstreamer0.10-gnomevfs0.10.11-3 GStreamer plugin for GnomeVFS ii python-feedparser 4.1-7 Universal Feed Parser for Python ii quodlibet-ext 0.23.1-1 extensions for the Quod Libet audi -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411850: zaptel install on vserver: mknod : operation not permitted
Package: zaptel Version: 1:1.2.11.dfsg-1 Severity: important *** Please type your report below this line *** The installation of zaptel on a vserver gues fails with the error: Setting up zaptel (1.2.11.dfsg-1) ... mknod: `/dev/zap/ctl': Operation not permitted On vserver mknod has to be expliciltly permitted to guests. The package zaptel is needed e.g. for installing Asterisk even without a need of a zaptel device. The relevant part from the postinst script: if ! echo $DYNFS | grep -q devfsd || echo $DYNFS | grep -q udevd ; then mkdir -p /dev/zap rm -f /dev/zap/ctl # snip mknod /dev/zap/ctl c 196 0 # snip N=1 for N in `seq 250`; do rm -f /dev/zap/$N; mknod /dev/zap/$N c 196 $N; N=`expr $N + 1` done That mknod is in itself a violation of policy section 10.6 (the package has mknod-in-maintainer-script in a lintian overrides file). It is also unneccesary on systems with either udev or devfs. Those rues also need changing, as device 250 should now become /dev/zap/transcode . (and in case you wonder: the mixing of seq and shell arithemtics above is funny, but happens to be harmless) -- System Information: Debian Release: 4.0 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-3-vserver-686 Locale: LANG=he_IL.UTF-8, LC_CTYPE=he_IL.UTF-8 (charmap=UTF-8) Versions of packages zaptel depends on: ii fxload0.0.20020411-1 Firmware download to EZ-USB device ii libc6 2.3.6.ds1-11 GNU C Library: Shared libraries ii libnewt0.52 0.52.2-9 Not Erik's Windowing Toolkit - tex ii libusb-0.1-4 2:0.1.12-2 userspace USB programming library ii procps1:3.2.7-3 /proc file system utilities zaptel recommends no packages. -- no debconf information -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411565: suggests non-existing packages
Hi On Mon, 19 Feb 2007 21:35:08 +0100 Norbert Tretkowski [EMAIL PROTECTED] wrote: Package suggests python-taglib and python-tagpy, both are not available in unstable. I know about this, it was quite intentional and I want to package those python modules if nobody else volunteers to do so. But I'm too busy to do it right now. -- Michal Čihař | http://cihar.com | http://blog.cihar.com signature.asc Description: PGP signature
Bug#411853: espeak - FTBFS: architecture s390 not allowed in source
Package: espeak Version: 1.16-2.1 Severity: serious There was an error while trying to autobuild your package: Automatic build of espeak_1.16-2.1 on lxdebian.bfinv.de by sbuild/s390 98 [...] dh_testdir architecture s390 not allowed in source make: *** [build-stamp] Error 1 ** Build finished at 20070221-0928 FAILED [dpkg-buildpackage died] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411854: dansguardian and libclamav1
Package: dansguardian Version: 2.8.0.6-antivirus-6.4.4.1-1 Severity: normal When trying to upgrade my system the clamav 0.90-1 depends on libclamav2 and dansguardian depends on libclamav1, this results in removing dansguardian. Thanks. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411855: auctex: [INTL:de] German debconf translation for auctex
Package: auctex Version: 11.83-4 Severity: wishlist Tags: patch l10n Hi Davide, attached is an unfuzzied German debconf translation. I think auctex should really have an upload targetted at etch, fixing the three l10n bugs plus the reportbug thing. If you don't have time, I can prepare an NMU. Regards, Frank -- Dr. Frank Küster Single Molecule Spectroscopy, Protein Folding @ Inst. f. Biochemie, Univ. Zürich Debian Developer (teTeX/TeXLive)
Bug#411856: Wrong package referenced in NOTES.Debian
package: request-tracker3.6 This should point to rt3.6-clients: MAIL CONFIGURATION -- [This section has been moved to README.Debian in the rt3-clients package.] -- LinuXia Systems = http://www.linuxia.de/ Expert Interchange Consulting and System Administration ICDEVGROUP = http://www.icdevgroup.org/ Interchange Development Team -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411799: python-ldap: upstream 2.2.1 now supports python2.5
Lester Cheung [EMAIL PROTECTED] writes: Is it possible to package 2.2.1 from upstream? It would be nice to have this module in python2.5. Sure, but not until Etch is out -- see upload policy at [1]. You can get a preliminary package at http://people.debian.org/~vela/python-ldap/. [1] http://lists.debian.org/debian-devel-announce/2006/12/msg4.html Thanks, Matej -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411857: vlc does not gracefully handle insufficient bandwidth
Package: vlc Version: 0.8.6.a.debian-1 Severity: normal While streaming N.American video from Asia, there is often insufficient bandwidth. Xine and mplayer handle this but halting playback and rebuffering, then resuming playback. vlc, however, first loses sound, continues to play video for a little while, then playback permanently stops in mid-stream. vlc really needs to be able to rebuffer bandwidth-challenged streams. (vlc seems to be faster/more efficient then xine and mplayer at the moment, and of the three, is the only player that will cleanly play video on one of my 500 MHz Thinkpads. Keep up the good work!!) -- System Information: Debian Release: 4.0 APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-3-686 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Versions of packages vlc depends on: ii libaa1 1.4p5-30 ascii art library ii libatk1.0-0 1.12.4-1 The ATK accessibility toolkit ii libc6 2.3.6.ds1-11 GNU C Library: Shared libraries ii libcaca00.99.beta11.debian-2 colour ASCII art library ii libcairo2 1.2.4-4 The Cairo 2D vector graphics libra ii libcdio60.76-1 library to read and control CD-ROM ii libcucul0 0.99.beta11.debian-2 low-level Unicode character drawin ii libdbus-1-3 1.0.2-1 simple interprocess messaging syst ii libdbus-glib-1-20.71-3 simple interprocess messaging syst ii libfontconfig1 2.4.2-1 generic font configuration library ii libfreetype62.2.1-5 FreeType 2 font engine, shared lib ii libfribidi0 0.10.7-4 Free Implementation of the Unicode ii libgcc1 1:4.1.1-21 GCC support library ii libgl1-mesa-glx [li 6.5.1-0.5A free implementation of the OpenG ii libglib2.0-02.12.4-2 The GLib library of C routines ii libglu1-mesa [libgl 6.5.1-0.5The OpenGL utility library (GLU) ii libgtk2.0-0 2.8.20-5 The GTK+ graphical user interface ii libice6 1:1.0.1-2X11 Inter-Client Exchange library ii libiso9660-40.76-1 library to work with ISO9660 files ii libjpeg62 6b-13The Independent JPEG Group's JPEG ii libnotify1 0.4.3-1 sends desktop notifications to a n ii libpango1.0-0 1.14.8-5 Layout and rendering of internatio ii libpng12-0 1.2.15~beta5-1 PNG library - runtime ii libsdl-image1.2 1.2.5-2+b1 image loading library for Simple D ii libsdl1.2debian 1.2.11-7 Simple DirectMedia Layer ii libsm6 1:1.0.1-3X11 Session Management library ii libstdc++6 4.1.1-21 The GNU Standard C++ Library v3 ii libtar 1.2.11-4 C library for manipulating tar arc ii libtiff43.8.2-7 Tag Image File Format (TIFF) libra ii libvcdinfo0 0.7.23-3 library to extract information fro ii libvlc0 0.8.6.a.debian-1 multimedia player and streamer lib ii libwxbase2.6-0 2.6.3.2.1.5 wxBase library (runtime) - non-GUI ii libwxgtk2.6-0 2.6.3.2.1.5 wxWidgets Cross-platform C++ GUI t ii libx11-62:1.0.3-5X11 client-side library ii libxcursor1 1.1.7-4 X cursor management library ii libxext61:1.0.1-2X11 miscellaneous extension librar ii libxfixes3 1:4.0.1-5X11 miscellaneous 'fixes' extensio ii libxi6 1:1.0.1-4X11 Input extension library ii libxinerama11:1.0.1-4.1 X11 Xinerama extension library ii libxosd22.2.14-1.3 X On-Screen Display library - runt ii libxrandr2 2:1.1.0.2-5 X11 RandR extension library ii libxrender1 1:0.9.1-3X Rendering Extension client libra ii libxv1 1:1.0.2-1X11 Video extension library ii libxxf86vm1 1:1.0.1-2X11 XFree86 video mode extension l ii ttf-dejavu 2.14-2 Vera font family derivate with add ii vlc-nox 0.8.6.a.debian-1 multimedia player and streamer (wi ii zlib1g 1:1.2.3-13 compression library - runtime Versions of packages vlc recommends: pn videolan-doc none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411858: libsnmp-perl: Please apply patch 1364650 for bug 1176130
Package: libsnmp-perl Version: 5.2.3-7 Severity: normal Tags: patch Please apply patch 1364650 for bug 1176130 This patch really neeeded to work with many devices via libsnmp-perl For example it needed for libsnmp-info-perl and netdisco This patch included upstream in 5.2.4pre1 pre-release PS. Links below http://sourceforge.net/tracker/index.php?func=detailaid=1364650group_id=12694atid=312694 http://sourceforge.net/tracker/index.php?func=detailaid=1176130group_id=12694atid=112694 -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (990, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.4.26 Locale: LANG=ru_RU.KOI8-R, LC_CTYPE=ru_RU.KOI8-R (charmap=KOI8-R) Versions of packages libsnmp-perl depends on: ii libsnmp9 5.2.3-7NET SNMP (Simple Network Managemen ii perl 5.8.8-7Larry Wall's Practical Extraction ii perl-base [perlapi-5.8.8] 5.8.8-7The Pathologically Eclectic Rubbis libsnmp-perl recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#411859: installation-report
Package: installation-reports Boot method: Debian Netinst 4.0 Etch CD Image version: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/debian-testing-i386-netinst.iso Date: 21.02.2007 14:00 Machine: Desktop PC (Motherboard ECS D6VAA, Dual CPU, chipset VIA VT82) Processor: Intel Pentium III 1GHz Memory: 768MB (3x 256MB SDRAM modules) Partitions: None... Output of lspci -nn and lspci -vnn: Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card:[E] Configure network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Install base system:[ ] Clock/timezone setup: [ ] User/password setup:[ ] Install tasks: [ ] Install boot loader:[ ] Overall install:[ ] Comments/Problems: The Installer wont find any network cards, even I change them for others, that are also in the list. I try Edimax EN-9503/4 with chipset Realtek 8139C. On other machines, it works, but on this one.. noway... I also try other linux distros. Fedora has stop responding during detecting HW. But RadHat and Mandriva works OK. Both detects network cards well. So I don't know, where the problem could be. P.S. Sorry for my English. :) I'm Czech guy... :) Best regards Martin Bareš
Bug#411840: procps: ps doesn't resolve uid-username of some processes
user [EMAIL PROTECTED] tag 411840 not-a-bug thanks On Wed, Feb 21, 2007 at 01:53:35PM +0300, Max Dmitrichenko wrote: Package: procps Version: 1:3.2.7-3 Severity: normal Processes which are running under users haldaemon and messagebus are displayed somehow different by ps utility. The following output of ps shows that their uids are not resolved into usernames. They are left 102 and 103 correspondingly. This is a common not a bug, see also #405063. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#398303: More information needed.
tags 398303 + moreinfo thanks Hi ! I found this bug report not clear enough, you even say that you have no pb with other wikis. Could you please explain a way to reproduce it ? Romain -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]