Bug#533133: linux-image-2.6.30-1-amd64: iwlagn fails with Microcode SW error
Package: linux-image-2.6.30-1-amd64 Version: 2.6.30-1 Severity: normal Hi, trying the 2.6.30-1-amd64 package, it seems to have problems with wireless stuff. It works fine on 2.6.29-2-amd64, but with 2.6.30-1-amd64, it first connects and then hangs, and in dmesg I get: [ 239.780615] iwlagn :03:00.0: Microcode SW error detected. Restarting 0x200. After that, nothing works until I reload the module. But the SW error appears as soon as there is some traffic so it's quite unusable. cor...@hidalgo: ls /lib/firmware total 1,1M -rw-r--r-- 1 root root 34K jun 10 2008 dvb-usb-dib0700-1.10.fw -rw-r--r-- 1 root root 148K avr 1 16:43 iwlwifi-3945-1.ucode -rw-r--r-- 1 root root 147K avr 1 16:43 iwlwifi-3945-2.ucode -rw-r--r-- 1 root root 184K avr 1 16:43 iwlwifi-4965-1.ucode -rw-r--r-- 1 root root 184K avr 1 16:43 iwlwifi-4965-2.ucode -rw-r--r-- 1 root root 337K avr 1 16:43 iwlwifi-5000-1.ucode ii firmware-iwlwifi 0.16 Binary firmware for Intel Wireless 3945, 4965 and 5000-series cards If you need more info, please ask. Cheers, -- Yves-Alexis -- Package-specific info: ** Version: Linux version 2.6.30-1-amd64 (Debian 2.6.30-1) (wa...@debian.org) (gcc version 4.3.3 (Debian 4.3.3-10) ) #1 SMP Sun Jun 14 15:00:29 UTC 2009 ** Command line: BOOT_IMAGE=/vmlinuz-2.6.30-1-amd64 root=/dev/mapper/hidalgo-root ro quiet ** Not tainted ** Kernel log: [ 47.160280] Registered led device: iwl-phy0::RX [ 47.165280] Registered led device: iwl-phy0::TX [ 47.247834] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 50.072770] e1000e :00:19.0: irq 30 for MSI/MSI-X [ 50.128871] e1000e :00:19.0: irq 30 for MSI/MSI-X [ 50.130590] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 52.813130] Registered led device: iwl-phy0::radio [ 52.813174] Registered led device: iwl-phy0::assoc [ 52.813211] Registered led device: iwl-phy0::RX [ 52.813252] Registered led device: iwl-phy0::TX [ 52.850478] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 53.674660] wlan0: authenticate with AP da:1d:40:1b:54:ec [ 53.687947] wlan0: authenticate with AP da:1d:40:1b:54:ec [ 53.709213] wlan0: authenticate with AP da:1d:40:1b:54:ec [ 53.711053] wlan0: authenticated [ 53.711059] wlan0: associate with AP da:1d:40:1b:54:ec [ 53.718779] wlan0: RX AssocResp from da:1d:40:1b:54:ec (capab=0x411 status=0 aid=3) [ 53.718786] wlan0: associated [ 53.724148] usb 3-1: USB disconnect, address 3 [ 53.724495] btusb_intr_complete: hci0 urb 8800bc435140 failed to resubmit (19) [ 53.724507] btusb_bulk_complete: hci0 urb 8800bb93ff00 failed to resubmit (19) [ 53.725461] btusb_bulk_complete: hci0 urb 8800bc435080 failed to resubmit (19) [ 53.725964] btusb_send_frame: hci0 urb 8800bb034b00 submission failed [ 53.745755] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 239.780615] iwlagn :03:00.0: Microcode SW error detected. Restarting 0x200. [ 240.000349] Registered led device: iwl-phy0::radio [ 240.000395] Registered led device: iwl-phy0::assoc [ 240.000433] Registered led device: iwl-phy0::RX [ 240.000470] Registered led device: iwl-phy0::TX [ 283.169110] wlan0: deauthenticating by local choice (reason=3) [ 283.177117] mac80211-phy0: failed to remove key (0, da:1d:40:1b:54:ec) from hardware (-22) [ 283.538517] iwlagn :03:00.0: PCI INT A disabled [ 285.856237] cfg80211: Using static regulatory domain info [ 285.856245] cfg80211: Regulatory domain: EU [ 285.856250] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 285.856258] (2402000 KHz - 2482000 KHz @ 4 KHz), (600 mBi, 2000 mBm) [ 285.856265] (517 KHz - 519 KHz @ 4 KHz), (600 mBi, 2300 mBm) [ 285.856272] (519 KHz - 521 KHz @ 4 KHz), (600 mBi, 2300 mBm) [ 285.856279] (521 KHz - 523 KHz @ 4 KHz), (600 mBi, 2300 mBm) [ 285.856287] (523 KHz - 533 KHz @ 4 KHz), (600 mBi, 2000 mBm) [ 285.856294] (549 KHz - 571 KHz @ 4 KHz), (600 mBi, 3000 mBm) [ 285.856308] cfg80211: Calling CRDA for country: EU [ 285.929392] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks [ 285.929401] iwlagn: Copyright(c) 2003-2009 Intel Corporation [ 285.933633] iwlagn :03:00.0: PCI INT A - GSI 17 (level, low) - IRQ 17 [ 285.933689] iwlagn :03:00.0: setting latency timer to 64 [ 285.933888] iwlagn :03:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 [ 285.975179] iwlagn :03:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels [ 285.975397] iwlagn :03:00.0: irq 32 for MSI/MSI-X [ 285.976816] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 285.977686] iwlagn :03:00.0: firmware: requesting iwlwifi-4965-2.ucode [ 286.033511] iwlagn :03:00.0: loaded firmware version 228.57.2.23 [ 286.235911] Registered led device: iwl-phy0::radio [ 286.235954] Registered led device: iwl-phy0::assoc [ 286.235995] Registered led device: iwl-phy0::RX [ 286.236032] Registered led device:
Bug#482489: submission mirror2.corbina.ru: ftpsync required, arch consistency
ok, I'm started ftpsync and stoped all other old scripts 14.06.2009, в 13:24, Simon Paillard написал(а): retitle 482489 mirror submission for mirror2.corbina.ru: ftpsync required thanks Hi, Could you please fix the remaining issues reported below ? Given the current mirrors infrastructure, we need you (the admin of mirrors) to be reactive. Thanks in advance for your answer and best regards. On Mon, Apr 06, 2009 at 11:09:21PM +0200, Simon Paillard wrote: On Wed, Mar 25, 2009 at 10:24:04AM +0300, Bogdanov Roman wrote: Good time of day. Your question has been submitted to my colleague. Vadim, please help out. Any news ? (initial submission on 23 May 2008) Remark still valid today : Simon Paillard пишет: * The sync script you should use is described at http://lists.debian.org/debian-mirrors-announce/2008/11/msg1.html Please run the recommended script ftpsync, see http://debian.org/mirror/ftpmirror#how Your mirror is still missing a local trace file, because it doesn't use our ftpsync script. Regards. -- Simon Paillard -- Шаульский Вадим Отдел развития телематических услуг, Корбина телеком mailto:sh.va...@corbina.ru тел: 728-4000 доб. 50949
Bug#532835: linux-image-2.6.30-trunk-686, KMS enabled: black screen
Packages: linux-image-2.6.30-trunk-686_2.6.30-1~experimental.1~snapshot.13813_i386.deb and linux-image-2.6.30-1-686_2.6.30-1snapshot.13817_i386.deb (debian kernel-archive) System: Debian/sid, mesa freedesktop git version, KMS enabled (module i915 modeset=1 loaded) Processor: Intel Pentium M 1.70 GHz Chipset: 852GM/855GM Severity: important Both linux-image-2.6.30-trunk-686 snapshot.13813 and linux-image-2.6.30-1-686 snapshot.13817 are still showing the same issue. Cheers, Jos van Wolput -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533134: libnanohttp1: strerror() is not thread-safe, need to use strerror_r()
Package: libnanohttp1 Version: 1.1.0-16 Severity: important I'm marking this bug as important because it can cause unreliable operation and potentially crashes. If one thread has a network problem then other threads are likely to have the same problem at the same time and trigger a race condition. I'll send a patch shortly. -- System Information: Debian Release: 5.0.1 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core) Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C) Shell: /bin/sh linked to /bin/bash Versions of packages libnanohttp1 depends on: ii libc6 2.7-18 GNU C Library: Shared libraries ii libssl0.9.8 0.9.8g-15+lenny1 SSL shared libraries ii libxml2 2.6.32.dfsg-5GNOME XML library libnanohttp1 recommends no packages. libnanohttp1 suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#528482: openct package need several fixes
Hi Eric, thanks for updating the openct package. Enhanced pcscd should be dropped, since 99% of the users do something wrong if they install openct and pcscd at the same time. Usualy it is best to use either opensc with openct. or opensc (or other apps) with pcscd and a reader driver (e.g. libccid) other than openct. Does this mean we should disable it at configure time? no need for that. with pcsc option enabled we build the pcsc driver in ifdhandler format. it is an extra binary and only uses a few bytes of disk space, so no harm for the normal users. and those who want to use it can configure pcscd to do so. Thanks, Andreas -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#527566: #527566 mediatomb-daemon: Installation error due to postinst script
On Tue, 02 Jun 2009, Alban Browaeys wrote: And there seems to be a bug in the mv_db is triggers: [ -e /var/lib/mediatomb/sqlite3.db ] \ cp --preserve /var/lib/mediatomb/sqlite3.db /var/lib/mediatomb/mediatomb.db alsways returns 1 which errors out the postinst. Adding || return 0 at the end of it helps. Probably adding parenthesis around to avoid it applying to the cp would be good. The usual approach for this is to either do: ! [ -e file ] || cp file target or plain old ifs: if [ -e file ]; then cp file target fi -- | .''`. ** Debian GNU/Linux ** Peter Palfrader | : :' : The universal http://www.palfrader.org/ | `. `' Operating System | `-http://www.debian.org/ -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#527737: trash: does not show the deleted files
Le dimanche 14 juin 2009 à 19:25 -0700, test...@riseup.net a écrit : The nautilus Trash successfully moves files to, but CANNOT DISPLAY OR DELETE files that end up in, /var/tmp/.Trash-1001 There's another (tiny) filesystem mounted at /boot/grub. Further experimentation shows that if the permissions are set appropriately, nautilus can deal with files in /boot/grub/.Trash-1001 the way it's supposed to. What is the filesystem for your /var/tmp mount? -- .''`. Josselin Mouette : :' : `. `' “I recommend you to learn English in hope that you in `- future understand things” -- Jörg Schilling signature.asc Description: Ceci est une partie de message numériquement signée
Bug#533135: freedoom: DFSG Violation: Copyrighted materials in Freedoom
Package: freedoom Severity: serious Justification: Policy 2.1 I am the Freedoom maintainer and it has come to my attention that there have been copyrighted materials in Freedoom for some time, and this affects all of versions in current Debian distributions (oldstable, stable, testing, unstable, experimental). The files in question are: Entire directory of musics/metabolist musics/d_adrian.mus musics/d_ampie.mus musics/d_count2.mus musics/d_ddtbl2.mus musics/d_ddtbl3.mus musics/d_doom2.mus musics/d_in_cit.mus musics/d_messag.mus musics/d_messg2.mus musics/d_romer2.mus musics/d_runni2.mus musics/d_shawn3.mus musics/d_stlks2.mus musics/d_tense.mus musics/d_theda2.mus Currently in the process of resolving the problem upstream, but informing Debian at the same time. -- System Information: Debian Release: 5.0.1 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-2-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#530710: Thunderbird is the worst
Thunderbird/icedove is the worst. Every mail notification steals the focus. Also, if there is an alert, the focus is stolen (arguably it should), but it seems that it's stolen repeatedly if the alert window is not closed. Also, Thunderbird steals the focus multiple times when creating the window. Forward it over a slow SSH connection (like when you have to debug it for your mother) and then try to work while waiting for the window to build. -- .''`. martin f. krafft madd...@d.o Related projects: : :' : proud Debian developer http://debiansystem.info `. `'` http://people.debian.org/~madduckhttp://vcs-pkg.org `- Debian - when you have better things to do than fixing systems digital_signature_gpg.asc Description: Digital signature (see http://martin-krafft.net/gpg/)
Bug#533105: quodlibet: Should remember queue even when closed
forwarded 533105 http://code.google.com/p/quodlibet/issues/detail?id=223 thanks Forwarding this bug to the upstream bugtracker. later, Christine -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533136: nis: [INTL:fr] French debconf templates translation update
Package: nis Version: N/A Severity: wishlist Tags: patch l10n Please find attached the french debconf templates update, proofread by the debian-l10n-french mailing list contributors. Thanks for taking care of warning translators before uploading a new version with string changes. It's highly appreciated. -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.29-1-686 (SMP w/1 CPU core) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash # Translation of sdic debconf templates to French # Copyright (C) 2004-2009 Debian French l10n team debian-l10n-fre...@lists.debian.org # This file is distributed under the same license as the sdic package. # # Translators: # Michel Grentzinger mic.gre...@online.fr, 2004. # Nicolas Sauzede nsauz...@free.fr, 2009. msgid msgstr Project-Id-Version: nis_3.10-2\n Report-Msgid-Bugs-To: n...@packages.debian.org\n POT-Creation-Date: 2009-05-31 09:41+0200\n PO-Revision-Date: 2009-06-01 15:23+0200\n Last-Translator: Nicolas Sauzede nsauz...@free.fr\n Language-Team: French debian-l10n-fre...@lists.debian.org\n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n #. Type: string #. Description #: ../templates:2001 msgid NIS domain: msgstr Domaine NIS : #. Type: string #. Description #. Translators, it is recommended to keep domainname which is a #. technical term in NIS. If you insist on translating, you can do #. things such as: #. 'nom de domaine (domainname)' (for a French translation) #: ../templates:2001 msgid Please choose the NIS \domainname\ for this system. If you want this machine to just be a client, you should enter the name of the NIS domain you wish to join. msgstr Veuillez indiquer le nom de domaine (domainname) NIS pour ce système. Si cette machine n'est qu'un client, saisissez simplement le nom du domaine NIS que vous souhaitez rejoindre. #. Type: string #. Description #. Translators, it is recommended to keep domainname which is a #. technical term in NIS. If you insist on translating, you can do #. things such as: #. 'nom de domaine (domainname)' (for a French translation) #: ../templates:2001 msgid Alternatively, if this machine is to be a NIS server, you can either enter a new NIS \domainname\ or the name of an existing NIS domain. msgstr Si cette machine doit être un serveur NIS, vous pouvez saisir soit un nouveau nom de domaine (domainname) NIS, soit le nom d'un domaine NIS existant. #~ msgid Your system needs more configuration #~ msgstr Votre système a besoin d'autres paramètres #~ msgid #~ Your system has not yet been completely configured as a NIS client - you #~ need to setup /etc/nsswitch.conf and/or /etc/passwd and /etc/group. #~ Please read /usr/share/doc/nis/nis.debian.howto.gz to find out how. #~ msgstr #~ Votre système n'a pas été correctement configuré comme client NIS ; vous #~ devez adapter /etc/nsswitch.conf ou les deux fichiers /etc/passwd et /etc/ #~ group. Veuillez consulter /usr/share/doc/nis/nis.debian.howto.gz pour #~ savoir comment faire.
Bug#533131: Acknowledgement (ibus GUI doesn't show up after upgrade)
The workaround is removing the file '/usr/share/ibus/ui/gtk/toolitem.pyc' --Roger -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#509860: Fwd: Non-free file in scheme48 source emacs/cmulisp.el
Olin Shivers has agreed that emacs/cmulisp.el can be distributed without the no-ads clause, in message: qijr5xmjtgs.wl%shiv...@mongkok.dyndns.org on scheme-48-b...@s48.org I will no longer repack the upstream tarball in the next release of scheme48. The full content of the message follows: -- Forwarded message -- From: Olin Shivers shiv...@mongkok.dyndns.org Date: Sun, Jun 14, 2009 at 4:17 PM Subject: Re: Non-free file in scheme48 source emacs/cmulisp.el To: dmoer...@gmail.com Cc: scheme-48-b...@s48.org At Tue, 09 Jun 2009 10:42:49 +0200, dmoer...@gmail.com wrote: I currently maintain scheme48 in Debian. I just wanted to inform you that there is one file in the source with an invariant clause inconsistent with scheme48's 3-clause BSD license. emacs/cmulisp.el has a license that prohibits distribution for money: ;;; Copyright Olin Shivers (1988). ;;; Please imagine a long, tedious, legalistic 5-page gnu-style copyright ;;; notice appearing here to the effect that you may use this code any ;;; way you like, as long as you don't charge money for it, remove this ;;; notice, or hold me liable for its results. I was unable to contact Olin Shivers to get the license changed.[1] Obviously you might not really care if this file is still in the sources since the intent of the license seems to suggest that it should be consistent with 3-clause BSD, but I just wanted to give you a heads-up in case you weren't aware of it and/or could perhaps contact Olin to ask him about the status of the license. For the Debian package I have rebuilt the tarball to remove this file. I'm perfectly happy for you to distribute that code under the Debian-approved license. As Jonathan remarked, the original versions of these modes (comint, shell, etc.) that I wrote in the 80's got messed up when the Gnu folks folded it into gnu-emacs, at the direction of RMS. Alas. -Olin -- Daniel Moerner dmoer...@gmail.com signature.asc Description: OpenPGP digital signature
Bug#533137: [INTL:es] Spanish debconf template translation for nis
Package: nis Version: 3.17-20 Severity: wishlist Tags: l10n patch -- Saludos Fran # nis po-debconf translation to spanish # Copyright (C) 2006, 2009 Software in the Public Interest, SPI Inc. # This file is distributed under the same license as the nis package. # # Changes: # - Initial translation # Steve Lord Flaubert stonescen...@gmail.com, 2007 # # - Updates # Francisco Javier Cuadrado fcocuadr...@gmail.com, 2009 # # Traductores, si no conocen el formato PO, merece la pena leer la # documentación de gettext, especialmente las secciones dedicadas a este # formato, por ejemplo ejecutando: # info -n '(gettext)PO Files' # info -n '(gettext)Header Entry' # # Equipo de traducción al español, por favor lean antes de traducir # los siguientes documentos: # # - El proyecto de traducción de Debian al español # http://www.debian.org/intl/spanish/ # especialmente las notas y normas de traducción en # http://www.debian.org/intl/spanish/notas # # - La guía de traducción de po's de debconf: # /usr/share/doc/po-debconf/README-trans # o http://www.debian.org/intl/l10n/po-debconf/README-trans # msgid msgstr Project-Id-Version: nis 3.17-20\n Report-Msgid-Bugs-To: n...@packages.debian.org\n POT-Creation-Date: 2009-05-31 09:41+0200\n PO-Revision-Date: 2009-06-03 10:35+0100\n Last-Translator: Francisco Javier Cuadrado fcocuadr...@gmail.com\n Language-Team: Debian l10n Spanish debian-l10n-span...@lists.debian.org\n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n #. Type: string #. Description #: ../templates:2001 #| msgid Enter your NIS domain msgid NIS domain: msgstr Dominio de NIS: #. Type: string #. Description #. Translators, it is recommended to keep domainname which is a #. technical term in NIS. If you insist on translating, you can do #. things such as: #. 'nom de domaine (domainname)' (for a French translation) #: ../templates:2001 #| msgid #| You now need to choose a NIS domainname for your system. If you want this #| machine to just be a client, enter the NIS domainname of your network. #| Otherwise choose an appropriate NIS domainname. msgid Please choose the NIS \domainname\ for this system. If you want this machine to just be a client, you should enter the name of the NIS domain you wish to join. msgstr Escoja el «nombre del dominio» de NIS para este sistema. Si quiere que esta máquina sólo sea un cliente, debería introducir el nombre del dominio de NIS al que se quiere unir. #. Type: string #. Description #. Translators, it is recommended to keep domainname which is a #. technical term in NIS. If you insist on translating, you can do #. things such as: #. 'nom de domaine (domainname)' (for a French translation) #: ../templates:2001 msgid Alternatively, if this machine is to be a NIS server, you can either enter a new NIS \domainname\ or the name of an existing NIS domain. msgstr De forma alternativa, si esta máquina va a ser un servidor NIS, puede introducir un nuevo «nombre de dominio» de NIS o el nombre de un dominio de NIS existente. #~ msgid Your system needs more configuration #~ msgstr Su sistema necesita configuración adicional #~ msgid #~ Your system has not yet been completely configured as a NIS client - you #~ need to setup /etc/nsswitch.conf and/or /etc/passwd and /etc/group. #~ Please read /usr/share/doc/nis/nis.debian.howto.gz to find out how. #~ msgstr #~ Su sistema no se ha configurado aún completamente como un cliente NIS. #~ Necesita configurarlo modificando «/etc/nsswitch.conf» y/o «/etc/passwd» y «/ #~ etc/group». Por favor, lea «/usr/share/doc/nis/nis.debian.howto.gz» para #~ saber cómo hacerlo.
Bug#533139: [INTL:es] Spanish debconf template translation for gallery
Package: gallery
Version: 1.5.9-1.2
Severity: wishlist
Tags: l10n patch
--
Saludos
Fran
# gallery po-debconf translation to Spanish
# Copyright (C) 2005, 2007, 2009 Software in the Public Interest
# This file is distributed under the same license as the gallery package.
#
# Changes:
# - Initial translation
# César Gómez Martín cesar.go...@gmail.com
#
# - Revision
# Rudy Godoy Guillén r...@stone-head.org, 2007
#
# - Updates
# Francisco Javier Cuadrado fcocuadr...@gmail.com, 2009
#
# Traductores, si no conocen el formato PO, merece la pena leer la
# documentación de gettext, especialmente las secciones dedicadas a este
# formato, por ejemplo ejecutando:
# info -n '(gettext)PO Files'
# info -n '(gettext)Header Entry'
#
# Equipo de traducción al español, por favor, lean antes de traducir
# los siguientes documentos:
#
# - El proyecto de traducción de Debian al español
# http://www.debian.org/intl/spanish/
# especialmente las notas de traducción en
# http://www.debian.org/intl/spanish/notas
#
# - La guía de traducción de po's de debconf:
# /usr/share/doc/po-debconf/README-trans
# o http://www.debian.org/intl/l10n/po-debconf/README-trans
#
msgid
msgstr
Project-Id-Version: gallery 1.5.9-1.2\n
Report-Msgid-Bugs-To: gall...@packages.debian.org\n
POT-Creation-Date: 2008-10-22 07:13+0200\n
PO-Revision-Date: 2007-05-13 18:42-0500\n
Last-Translator: César Gómez Martín cesar.go...@gmail.com\n
Language-Team: Debian l10n Spanish debian-l10n-span...@lists.debian.org\n
MIME-Version: 1.0\n
Content-Type: text/plain; charset=utf-8\n
Content-Transfer-Encoding: 8bit\n
#. Type: multiselect
#. Description
#: ../gallery.templates:1001
msgid Which web server would you like to reconfigure automatically:
msgstr Qué servidor web le gustaría reconfigurar automáticamente:
#. Type: multiselect
#. Description
#: ../gallery.templates:1001
msgid
If you do not select a web server to reconfigure automatically, gallery will
not be usable until you reconfigure your webserver to enable gallery.
msgstr
Si no selecciona un servidor web para que se reconfigure automáticamente,
gallery no podrá usarse hasta que reconfigure su servidor web para habilitar
gallery.
#. Type: boolean
#. Description
#: ../gallery.templates:2001
msgid Should ${webserver} be restarted?
msgstr ¿Desea reiniciar ${webserver}?
#. Type: boolean
#. Description
#: ../gallery.templates:2001
msgid
Remember that in order to activate the new configuration ${webserver} has to
be restarted. You can also restart ${webserver} by manually executing invoke-
rc.d ${webserver} restart.
msgstr
Recuerde que para activar la nueva configuración se debe reiniciar
${webserver}. También puede reiniciar ${webserver} ejecutando manualmente
«invoke-rc.d ${webserver} restart».
Bug#533138: /usr/bin/evince: evince renders fonts terribly when a pdf also includes embedded fonts
Package: evince
Version: 2.24.2-2
File: /usr/bin/evince
Severity: important
*** Please type your report below this line ***
I am not sure this is logged in the right place, it might belong against
poppler. I can't see any duplicate bugs, but apologies if so, I don't know
what I am doing.
So, many PDFs render fine for me, but some produce terribly blocky text. I
don't have any examples that I can redistribute, but any journal article
downloaded from www.jstor.org seems to exhibit the problem.
I have have done some research to try and figure out what is going on. The
following bug reports against ubuntu and arch-linux seem to repeat what I
see, and suggest it is to do with a conflict between application
anti-aliasing and freetype autohinting when pdfs include embedded fonts, and
that some packages (poppler derived) don't use fontconfig and so a simple
dpkg-reconfigure fontconfig-config is not enough. See:
https://bugs.launchpad.net/ubuntu/+source/poppler/+bug/48146
http://groups.google.cl/group/arch-linux/browse_thread/thread/5402873a6e65c151
A patch is suggested in the ubuntu thread (against poppler) that disables
freetype autohinting at compile time. I have not tried applying and
recompiling for a range of reasons not worth exploring. It is as follows:
--- poppler-0.6.4/splash/SplashFTFont.cc.-hinting2008-01-21
22:59:14.0 +0300
+++ poppler-0.6.4/splash/SplashFTFont.cc2008-12-18 17:21:04.0
+0300
@@ -180,7 +180,7 @@
}
// if we have the FT2 bytecode interpreter, autohinting won't be used
-#ifdef TT_CONFIG_OPTION_BYTECODE_INTERPRETER
+#if 0
if (FT_Load_Glyph(ff-face, gid,
aa ? FT_LOAD_NO_BITMAP : FT_LOAD_DEFAULT)) {
return gFalse;
Does this mean anything to anyone?
Thanks.
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (990, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.29.1-jem (PREEMPT)
Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages evince depends on:
ii gconf2 2.26.2-1 GNOME configuration database
syste
ii gnome-icon-theme 2.26.0-1 GNOME Desktop icon theme
ii libatk1.0-01.26.0-1 The ATK accessibility toolkit
ii libc6 2.9-14GNU C Library: Shared libraries
ii libcairo2 1.8.6-2+b1The Cairo 2D vector graphics
libra
ii libdbus-1-31.2.14-2 simple interprocess messaging
syst
ii libdbus-glib-1-2 0.80-4simple interprocess messaging
syst
ii libdjvulibre21 3.5.21-3 Runtime support for the DjVu
image
ii libfontconfig1 2.6.0-4 generic font configuration
library
ii libfreetype6 2.3.9-5 FreeType 2 font engine, shared
lib
ii libgcc11:4.4.0-6 GCC support library
ii libgconf2-42.26.2-1 GNOME configuration database
syste
ii libglade2-01:2.6.4-1 library to load .glade files at
ru
ii libglib2.0-0 2.20.3-1 The GLib library of C routines
ii libgnome-keyring0 2.26.1-1 GNOME keyring services library
ii libgtk2.0-02.16.2-1 The GTK+ graphical user
interface
ii libice62:1.0.5-1 X11 Inter-Client Exchange
library
ii libkpathsea4 2007.dfsg.2-5 TeX Live: path search library
for
ii libpango1.0-0 1.24.2-1 Layout and rendering of
internatio
ii libpoppler-glib4 0.10.4-3 PDF rendering library
(GLib-based
ii libsm6 2:1.1.0-2 X11 Session Management library
ii libspectre10.2.2.ds-1+b1 Library for rendering
Postscript d
ii libstdc++6 4.4.0-6 The GNU Standard C++ Library v3
ii libtiff4 3.8.2-11 Tag Image File Format (TIFF)
libra
ii libx11-6 2:1.2.1-1 X11 client-side library
ii libxml22.7.3.dfsg-1 GNOME XML library
ii shared-mime-info 0.60-2FreeDesktop.org shared MIME
databa
ii zlib1g 1:1.2.3.3.dfsg-13 compression library - runtime
Versions of packages evince recommends:
ii dbus-x11 1.2.14-2 simple interprocess messaging
syst
ii gvfs 1.2.3-1userspace virtual filesystem -
ser
Versions of packages evince suggests:
ii nautilus 2.26.3-1 file manager and graphical
shell f
pn poppler-data none (no description available)
pn unrar none (no description available)
-- no debconf information
Bug#533141: Current netatalk fails to build from source
Package: netatalk Version: 2.0.4~rc2-1 Severity: serious Okay, perhaps I am cluless or there's something seriously wrong with my system, but this has never failed me in the past. I am try to rebuild the package from source to enable openSSL. Going through the following apt-get source netatalk cd netatalk-2.0.4~rc2 dpkg-buildpackage (with or without DEB_BUILD_OPTIONS=openssl) will die with the following below. BTW (and perhaps this should be its own separate bug), the README.Debian seems to suggest openssl support is not need to connect to OS X 10.4 and higher, but TimeMachine won't connect with the stock build. I'm not sure if I'm misunderstanding the readme me, it is wrong, or I have some misconfiguration. cd . /bin/sh /usr/src/netatalk-2.0.4~rc2/missing --run autoheader rm -f stamp-h1 touch config.h.in /usr/bin/make all-recursive make[2]: Entering directory `/usr/src/netatalk-2.0.4~rc2' Making all in libatalk make[3]: Entering directory `/usr/src/netatalk-2.0.4~rc2/libatalk' Making all in adouble make[4]: Entering directory `/usr/src/netatalk-2.0.4~rc2/libatalk/adouble' /bin/sh ../../libtool --tag=CC --mode=compile cc -DHAVE_CONFIG_H -I. -I../.. -I../../include -D_U_=__attribute__((unused)) -g -O2 -g -Wall -O2 -I../../sys -c -o ad_open.lo ad_open.c ../../libtool: line 793: X--tag=CC: command not found ../../libtool: line 826: libtool: ignoring unknown tag : command not found ../../libtool: line 793: X--mode=compile: command not found ../../libtool: line 959: *** Warning: inferring the mode of operation is deprecated.: command not found ../../libtool: line 960: *** Future versions of Libtool will require --mode=MODE be specified.: command not found ../../libtool: line 1103: Xcc: command not found ../../libtool: line 1103: X-DHAVE_CONFIG_H: command not found ../../libtool: line 1103: X-I.: command not found ../../libtool: line 1103: X-I../..: No such file or directory ../../libtool: line 1103: X-I../../include: No such file or directory ../../libtool: line 1103: X-D_U_=__attribute__((unused)): command not found ../../libtool: line 1103: X-g: command not found ../../libtool: line 1103: X-O2: command not found ../../libtool: line 1103: X-g: command not found ../../libtool: line 1103: X-Wall: command not found ../../libtool: line 1103: X-O2: command not found ../../libtool: line 1103: X-I../../sys: No such file or directory ../../libtool: line 1103: X-c: command not found ../../libtool: line 1154: Xad_open.lo: command not found ../../libtool: line 1159: libtool: compile: cannot determine name of library object from `': command not found make[4]: *** [ad_open.lo] 1 הלקת make[4]: Leaving directory `/usr/src/netatalk-2.0.4~rc2/libatalk/adouble' make[3]: *** [all-recursive] 1 הלקת make[3]: Leaving directory `/usr/src/netatalk-2.0.4~rc2/libatalk' make[2]: *** [all-recursive] 1 הלקת make[2]: Leaving directory `/usr/src/netatalk-2.0.4~rc2' make[1]: *** [all] 2 הלקת make[1]: Leaving directory `/usr/src/netatalk-2.0.4~rc2' make: *** [debian/stamp-makefile-build] 2 הלקת dpkg-buildpackage: error: debian/rules build gave error exit status 2 -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (750, 'testing'), (110, 'unstable'), (101, 'experimental'), (10, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-2-amd64 (SMP w/4 CPU cores) Locale: LANG=he_IL.UTF-8, LC_CTYPE=he_IL.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages netatalk depends on: ii libc62.9-12 GNU C Library: Shared libraries ii libcomerr2 1.41.3-1common error description library ii libcrack22.8.13-9pro-active password checker librar ii libcups2 1.3.10-2Common UNIX Printing System(tm) - ii libdb4.7 4.7.25-6Berkeley v4.7 Database Libraries [ ii libgcrypt11 1.4.4-2 LGPL Crypto library - runtime libr ii libgnutls26 2.6.6-1 the GNU TLS library - runtime libr ii libgssapi-krb5-2 1.6.dfsg.4~beta1-13 MIT Kerberos runtime libraries - k ii libk5crypto3 1.6.dfsg.4~beta1-13 MIT Kerberos runtime libraries - C ii libkrb5-31.6.dfsg.4~beta1-13 MIT Kerberos runtime libraries ii libpam-modules 1.0.1-9 Pluggable Authentication Modules f ii libpam0g 1.0.1-9 Pluggable Authentication Modules l ii libwrap0 7.6.q-16Wietse Venema's TCP wrappers libra ii netbase 4.34Basic TCP/IP networking system ii perl 5.10.0-22 Larry Wall's Practical Extraction ii zlib1g 1:1.2.3.3.dfsg-13 compression library - runtime Versions of packages netatalk recommends: ii cracklib-runtime 2.8.13-9 runtime support for password check ii db4.7-util 4.7.25-6 Berkeley v4.7 Database Utilities pn libpam-cracklibnone(no
Bug#533142: [INTL:es] Spanish debconf template translation for mailcrypt
Package: mailcrypt Version: 3.5.8+CVS.2005.04.29.1-12 Severity: wishlist Tags: l10n patch -- Saludos Fran # mailcrypt po-debconf translation to Spanish # Copyright (C) 2006, 2007 by Davide G. M. Salvetti # This file is distributed under the same license as the mailcrypt package. # # Changes: # - Initial translation # Gorka Olaizola go...@escomposlinux.org, 2006 # # - Updates # Francisco Javier Cuadrado fcocuadr...@gmail.com, 2009 # # Traductores, si no conocen el formato PO, merece la pena leer la # documentación de gettext, especialmente las secciones dedicadas a este # formato, por ejemplo ejecutando: # info -n '(gettext)PO Files' # info -n '(gettext)Header Entry' # # Equipo de traducción al español, por favor lean antes de traducir # los siguientes documentos: # # - El proyecto de traducción de Debian al español # http://www.debian.org/intl/spanish/ # especialmente las notas y normas de traducción en # http://www.debian.org/intl/spanish/notas # # - La guía de traducción de po's de debconf: # /usr/share/doc/po-debconf/README-trans # o http://www.debian.org/intl/l10n/po-debconf/README-trans # msgid msgstr Project-Id-Version: mailcrypt 3.5.8+CVS.2005.04.29.1-12\n Report-Msgid-Bugs-To: sa...@debian.org\n POT-Creation-Date: 2007-07-26 17:33+0200\n PO-Revision-Date: 2009-06-08 11:56+0100\n Last-Translator: Francisco Javier Cuadrado fcocuadr...@gmail.com\n Language-Team: Debian l10n Spanish debian-l10n-span...@debian.org\n MIME-Version: 1.0\n Content-Type: text/plain; charset=UTF-8\n Content-Transfer-Encoding: 8bit\n #. Type: boolean #. Description #: ../templates:1001 msgid Should Mailcrypt be auto-loaded by default at your site? msgstr ¿Se debería cargar automáticamente Mailcrypt de forma predeterminada en su sistema? #. Type: boolean #. Description #: ../templates:1001 msgid Mailcrypt will globally (i.e., for all users on this site) overload certain Emacs functions and key-bindings if you answer affirmatively to this question. msgstr Mailcrypt reemplazará globalmente (para todos los usuarios del sitio) ciertas funciones de Emacs y enlaces de teclas, si responde sí a esta pregunta. #. Type: boolean #. Description #: ../templates:1001 msgid This is generally a good thing, since Mailcrypt is a very useful package; however you may not want it to happen, and instead let single users at your site decide by themselves if they should load this package. msgstr Esto es generalmente bueno, ya que Mailcrypt es un paquete muy útil, sin embargo quizás no quiera que esto suceda y, en su lugar, prefiere que cada usuario del sitio decida por sí mismo si quiere cargar este paquete. #. Type: boolean #. Description #: ../templates:1001 msgid If you answer negatively, people who desire to use it will have to put the string \(require 'mailcrypt-init)\ in their personal Emacs configuration file (e.g., \~/.emacs\ or \~/.emacs.el\) to load it. msgstr Si responde no, los usuarios que quieran usarlo deberán poner la cadena «(require 'mailcrypt-init)» en su archivo de configuración personal de Emacs (por ejemplo: «~/.emacs» o «~/.emacs.el») para cargarlo. #~ msgid Mailcrypt seems to be already auto-loaded at your site. Good. #~ msgstr Parece que Mailcrypt ya está cargado en su sistema. Bien. #~ msgid #~ By inspection of the file \/etc/emacs/site-start.el\ Mailcrypt seems to #~ be already auto-loaded by default at your site. #~ msgstr #~ Tras inspeccionar el fichero \/etc/emacs/site-start.el\ parece que\n #~ Mailcrypt ya se carga automáticamente por defecto en su sistema. #~ msgid #~ If this is not true, or if it's not what you want, please search that #~ file looking for \(require 'mailcrypt-init)\ resembling forms and fix #~ it; then run \dpkg-reconfigure mailcrypt\ if needed (recommended). #~ msgstr #~ Si esto no es verdad, o no es lo que quiere, busque en ese fichero #~ cadenas\n #~ parecidas a \(require 'mailcrypt-init)\ y arréglelo. Después ejecute\n #~ \dpkg-reconfigure mailcrypt\ si lo cree necesario (se recomienda).
Bug#533140: [INTL:es] Spanish debconf template translation for amavis-stats
Package: amavis-stats Version: 0.1.22-1 Severity: wishlist Tags: l10n patch -- Saludos Fran # amavis-stats po-debconf translation to Spanish # Copyright (C) 2005, 2009 Software in the Public Interest # This file is distributed under the same license as the amavis-stats package. # # Changes: # - Initial translation # César Gómez Martín cesar.go...@gmail.com # # - Updates # Francisco Javier Cuadrado fcocuadr...@gmail.com, 2009 # # Traductores, si no conocen el formato PO, merece la pena leer la # documentación de gettext, especialmente las secciones dedicadas a este # formato, por ejemplo ejecutando: # info -n '(gettext)PO Files' # info -n '(gettext)Header Entry' # # Equipo de traducción al español, por favor, lean antes de traducir # los siguientes documentos: # # - El proyecto de traducción de Debian al español # http://www.debian.org/intl/spanish/ # especialmente las notas de traducción en # http://www.debian.org/intl/spanish/notas # # - La guía de traducción de po's de debconf: # /usr/share/doc/po-debconf/README-trans # o http://www.debian.org/intl/l10n/po-debconf/README-trans # msgid msgstr Project-Id-Version: amavis-stats 0.1.22-1\n Report-Msgid-Bugs-To: \n POT-Creation-Date: 2006-11-26 12:34+0100\n PO-Revision-Date: 2009-06-05 11:41+0100\n Last-Translator: Francisco Javier Cuadrado fcocuadr...@gmail.com\n Language-Team: Debian l10n Spanish debian-l10n-span...@lists.debian.org\n MIME-Version: 1.0\n Content-Type: text/plain; charset=utf-8\n Content-Transfer-Encoding: 8bit\n #. Type: select #. Choices #: ../templates:1001 msgid All msgstr Todo #. Type: select #. Choices #: ../templates:1001 msgid None msgstr Ninguno #. Type: select #. Description #: ../templates:1002 msgid Web server to reconfigure: msgstr Servidor web que quiere reconfigurar: #. Type: select #. Description #: ../templates:1002 msgid Amavis-stats supports any web server that php3/php4 does, but this automatic configuration process only supports Apache and Apache-SSL. msgstr Amavis-stats admite cualquier servidor web que pueda utilizar php3/php4, pero este proceso de configuración automático sólo se puede realizar sobre Apache y Apache-SSL. #. Type: boolean #. Description #: ../templates:2001 msgid Remove RRD files on purge? msgstr ¿Desea eliminar los archivos RRD al purgar el paquete? #. Type: boolean #. Description #: ../templates:2001 msgid Amavis-stats keeps its database files under /var/cache/amavis-stats. Choose this option if this directory should be removed completely on purge. msgstr Los archivos de la base de datos de Amavis-stats se encuentran en el directorio «/var/cache/amavis-stats». Escoja esta opción si desea eliminar completamente este directorio cuando se purgue el paquete. #~ msgid Apache, Apache-SSL, Apache2, Both, None #~ msgstr Apache, Apache-SSL, Apache2, Ambos, Ninguno
Bug#478981: Thunderbird/icedove is worse
clone 478981 -1 reassign -1 icedove retitle -1 Thunderbird/icedove continuously abuses UrgencyHint tags -1 = upstream confirmed thanks Thunderbird/icedove is the worst. Every mail notification steals the focus. Also, if there is an alert, the focus is stolen (arguably it should), but it seems that it's stolen repeatedly if the alert window is not closed. Also, Thunderbird steals the focus multiple times when creating the window. Forward it over a slow SSH connection (like when you have to debug it for your mother) and then try to work while waiting for the window to build. This is an abuse of the UrgencyHint. Please fix that. -- .''`. martin f. krafft madd...@d.o Related projects: : :' : proud Debian developer http://debiansystem.info `. `'` http://people.debian.org/~madduckhttp://vcs-pkg.org `- Debian - when you have better things to do than fixing systems digital_signature_gpg.asc Description: Digital signature (see http://martin-krafft.net/gpg/)
Bug#532768: gtest: Missing build-dependency on python
On 2009-06-14 11:39:20 -0500, Steve M. Robbins wrote: Hello, On Thu, Jun 11, 2009 at 03:00:40PM +0200, Michael Bienia wrote: trying to build your package on Ubuntu karmic it FTBFS because of a missing build-dependency on python. What confuses me about this report is that it *does* build on Debian without using python [1]. The configure script probes for python and omits some tests if not found. What is different about the Ubuntu build environment? Ubuntu has python-minimal marked as Essential, so it's installed everywhere. Therefore the configure scripts detects the python binary, but python-minimal doesn't include all the needed modules for the test suite and a standard python is needed for it. Michael -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#464934: etnder grouched carbolise better
normalizers rooting chlforotic characterful -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#421491: lamb ramses tediously natteer
axching feudist stationer riverfront -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#531515: [Pkg-ia32-libs-maintainers] Processed: Re: Bug#531515: ia32-apt-get: breaks dpkg --control (= 1.15.1) and debsums
Hi, thank you for starcing the problem. Too me it looks like debsums calls dpkg-deb in an undocumented (although not uncommon for tools in general) way: 4: /usr/bin/dpkg-deb --control -- /var/cache/apt/archives/bzip2_1.0.5-2_amd64.deb /tmp/gD4mFRK2gm/DEBIAN According to the manpage the syntax is: -e, --control archive [directory] There is no mention in the docs that dpkg-deb supports --. Maybe because it is such a common option. Your patch isn't correct though, at least not complete. Think of this invocation: dpkg-deb --control -- /var/cache/apt/archives/bzip2_1.0.5-2_amd64.deb In that case, despite having 3 arguments, the DIR has to default to $(pwd)/DEBIAN. I guess there is no way around fully scanning the arguments and counting the valid bits. That should allow the use of the -D option as well. MfG Goswin -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533144: hmake can't find Data.Array.IArray
Package: hmake Version: 3.13-0.1 Severity: normal Hi, I'm trying to compile a program that uses Data.Array.IArray but hmake can't find it. I can compile it with ghc, but not with hmake. $ hmake red.hs MkProg: Can't find module Data.Array.IArray in user directories . Or in installed libraries/packages at /usr/lib/ghc-6.8.2/lib/base-3.0.1.0 /usr/lib/ghc-6.8.2/lib/haskell98-1.0.1.0 Asked for by: red.hs Fix using the -I, -P, or -package flags. Stop - hmake dependency error. -- System Information: Debian Release: 5.0 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/1 CPU core) Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages hmake depends on: ii ghc6 6.8.2dfsg1-1 GHC - the Glasgow Haskell Compilat ii haskell-utils 1.11 Utilities used by the Debian Haske ii libc6 2.7-18 GNU C Library: Shared libraries ii libgmp3c2 2:4.2.2+dfsg-3 Multiprecision arithmetic library ii libncurses5 5.7+20081213-1 shared libraries for terminal hand ii libreadline5 5.2-3.1GNU readline and history libraries hmake recommends no packages. Versions of packages hmake suggests: pn ghc5none (no description available) ii ghc66.8.2dfsg1-1 GHC - the Glasgow Haskell Compilat pn nhc98 none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#531978: libgphoto2: Please modernize udev rules
Hello again, Martin Pitt [2009-06-05 14:50 +0200]: This debdiff applies it to the Debian package and also moves udev rule creation from postinst to debian/rules. This is possible now, since from udev 136 on, rules are shipped in /lib/udev/rules.d/, thus avoid becoming conffiles. As with the other patch, this unfortunately missed to set CAMLIBS, to ensure to load the libs from the package build tree. Fixed patch attached. Martin -- Martin Pitt| http://www.piware.de Ubuntu Developer (www.ubuntu.com) | Debian Developer (www.debian.org) * Add patch 01_udev_rules_136: Add a new udev mode 136 to create contemporary udev rules which will avoid using the check_ptp_camera script, and provide udev DB tags for the hal deprecation. (Now accepted into upstream svn). * debian/libgphoto2-2.postinst: Drop udev rule creation. Udev rules are shipped in /lib now since udev 136, thus we can do it at build time. Drop debian/libgphoto2-2.dirs for this. * debian/rules: Create udev rules (with new mode 136), install them with dh_installudev. diff -u libgphoto2-2.4.6/debian/libgphoto2-2.postinst libgphoto2-2.4.6/debian/libgphoto2-2.postinst --- libgphoto2-2.4.6/debian/libgphoto2-2.postinst +++ libgphoto2-2.4.6/debian/libgphoto2-2.postinst @@ -16,25 +16,6 @@ rm -f /usr/share/hal/fdi/information/10freedesktop/10-camera-$PACKAGE.fdi rm -f /usr/share/hal/fdi/information/20thirdparty/$PACKAGE.fdi rm -f /usr/share/hal/fdi/information/10freedesktop/10-camera-$PACKAGE-device.fdi - - # create udev rules file - if [ -d /etc/udev/ ]; then - /usr/lib/$PACKAGE/print-camera-list udev-rules version 0.98 mode 0664 group plugdev /etc/udev/$PACKAGE.rules - # install the udev file only once: - #- the first time the package is installed - # OR - the first time the package is upgraded from a version earlier than 2.1.6-5.1 - if [ -z $2 ] || dpkg --compare-versions $2 lt 2.1.6-5.1 ; then - ln -sf ../$PACKAGE.rules /etc/udev/rules.d/025_$PACKAGE.rules - fi - - if [ -L /etc/udev/rules.d/020_libgphoto2_generic-ptp_support.rules ]; then - rm -f /etc/udev/rules.d/020_libgphoto2_generic-ptp_support.rules - fi - - if [ -f /etc/udev/libgphoto2_generic-ptp_support.rules ]; then - rm -f /etc/udev/libgphoto2_generic-ptp_support.rules - fi - fi ;; abort-upgrade|abort-remove|abort-deconfigure) diff -u libgphoto2-2.4.6/debian/libgphoto2-2.postrm libgphoto2-2.4.6/debian/libgphoto2-2.postrm diff -u libgphoto2-2.4.6/debian/changelog libgphoto2-2.4.6/debian/changelog --- libgphoto2-2.4.6/debian/rules +++ libgphoto2-2.4.6/debian/rules @@ -85,8 +85,14 @@ debian/libgphoto2-port0/usr/share/doc/libgphoto2-port0 ifeq ($(DEB_HOST_ARCH_OS),linux) - install -D packaging/generic/check-ptp-camera debian/libgphoto2-$(major)/lib/udev/check-ptp-camera + # we don't need this any more with current udev rm debian/tmp/usr/lib/udev/check-ptp-camera + + # create udev rules + CAMLIBS=`ls -d debian/libgphoto2-$(major)/usr/lib/libgphoto2/2*` ./packaging/generic/print-camera-list udev-rules version 136 mode 0664 group plugdev debian/libgphoto2-$(major).udev + dh_installudev + rm debian/libgphoto2-$(major).udev + -test -e debian/tmp/usr/lib/udev/check-mtp-device \ mkdir -p debian/libgphoto2-port0/lib/udev \ mv debian/tmp/usr/lib/udev/check-mtp-device \ @@ -122,7 +128,7 @@ dh_gencontrol -plibgphoto2-$(major)-dev dh_gencontrol -plibgphoto2-port0 ifeq (linux,$(DEB_HOST_ARCH_OS)) - dh_gencontrol -plibgphoto2-$(major) -- -Vudev-hotplug='udev (= 0.113-1)' + dh_gencontrol -plibgphoto2-$(major) -- -Vudev-hotplug='udev (= 0.136)' else dh_gencontrol -plibgphoto2-$(major) endif reverted: --- libgphoto2-2.4.6/debian/libgphoto2-2.dirs +++ libgphoto2-2.4.6.orig/debian/libgphoto2-2.dirs @@ -1 +0,0 @@ -etc/udev/rules.d diff -u libgphoto2-2.4.6/debian/patches/series libgphoto2-2.4.6/debian/patches/series --- libgphoto2-2.4.6/debian/patches/series +++ libgphoto2-2.4.6/debian/patches/series @@ -1,3 +1,4 @@ +01_udev_rules_136 10_disable_cache #11_hurd_no_path_max_bsdsource #45_increase_canon_timeout only in patch2: unchanged: --- libgphoto2-2.4.6.orig/debian/patches/01_udev_rules_136 +++ libgphoto2-2.4.6/debian/patches/01_udev_rules_136 @@ -0,0 +1,108 @@ +# Description: Add a new udev mode 136 to create contemporary udev rules which will avoid using the check_ptp_camera script, and provide udev DB tags for the hal deprecation. See http://lists.freedesktop.org/archives/devkit-devel/2009-June/000191.html for discussion. +# Upstream: http://sourceforge.net/tracker/?func=detailaid=2801117group_id=8874atid=308874 (in svn head) +Index: libgphoto2-2.4.6/packaging/generic/print-camera-list.c
Bug#532766: please make mutt not modify message on saving or copying (content-length, lines)
Thanks for your quick answer. On Mon, Jun 15, 2009 at 01:43:58AM +0200, Michelle Konzack wrote: Sorry but checksums should only be done one the Body and NOT the headers which are object of dynamic changes. Could you give any reference for this statement? The statement is practically untrue. Also messages are often needed verbatim (for instance for reporting spam). Why should a message change, only because it got moved from one mailbox to another? Fortunately the patch only improves the situation: There is no point in adding these headers for Maildir or imap and other storages are unchanged. (It would also save about 1MB diskspace for me.) Please rethink your decision. Helmut -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#532814: coreutils: cp -aL creates hardlinks where none were present before
brian m. carlson wrote:
Package: coreutils
Version: 7.4-2
Thanks for taking the time to report that.
If I create a directory structure such as the following:
a:
total 2
drwxr-xr-x 2 bmc bmc 1024 2009-06-11 21:06 dir
lrwxrwxrwx 1 bmc bmc4 2009-06-11 21:06 link - ../b
a/dir:
total 0
lrwxrwxrwx 1 bmc bmc 7 2009-06-11 21:06 link - ../../b
b:
total 2
-rw-r--r-- 1 bmc bmc 5 2009-06-11 21:06 file
and then run cp -aL a/* c, then the copies of file (in c) become hard
links to each other. This behavior is not documented, and it does not
occur if I use -LR instead of -aL. It appears to be triggered by
--preserve=links.
That is correct, and deliberate.
With --preserve=links, when cp detects two source files with the
same inode, it must arrange for the corresponding names to be hard
linked in the destination tree. That is what preserve=links means.
The trick is to realize that when you invoke cp with -L,
that tells cp to use stat (which never sees a symlink) rather
than lstat to determine inode numbers. So those two symlinks
to the same file appear (to cp -L) as hard links, and it preserves
that attribute because you used -a, which includes --preserve=links.
My opinion is that this behavior is incorrect[0], but I don't care very
much one way or the other. If this behavior is intentional, it should
be clearly documented in the manual page, at the very least. Either
changing the behavior or documenting the behavior[1] is satisfactory for
me.
I reproduced with this:
$ mkdir c; touch f; ln -s f a; ln -s f b; cp -aL a b c; ls -i1 c
74161745 a
74161745 b
[0] That is, --preserve=links should preserve symlinks as symlinks and
hard links as hard links. Just because -L forces all symlinks to be
dereferenced does not mean that I want to preserve symlinks as hard
links.
--preserve=links preserves *hard* links.
By definition (POSIX), cp -L can never produce a symlink.
[1] This information should be present in the manual page, not just in
the info page (which I almost never read).
Sorry, but this corner is obscure enough that any explanation
belongs in the info documentation.
In fact, there are already comments in the texinfo sources
saying that this deserves explanation.
I wrote a few words on -L and added to the --preserve=links description:
`links'
Preserve in the destination files any links between
corresponding source files. Note that with `-L' or `-H',
this option can convert symbolic links to hard links. For
example,
$ mkdir c; : a; ln -s a b; cp -aH a b c; ls -i1 c
74161745 a
74161745 b
Note the inputs: `b' is a symlink to regular file `a', yet
the files in destination directory, `c/', are hard-linked.
Since `-a' implies `--preserve=links', and since `-H' tells
`cp' to dereference command line arguments, it sees two files
with the same inode number, and preserves the perceived hard
link.
Here is a similar example that exercises `cp''s `-L' option:
$ mkdir b c; (cd b; : a; ln -s a b); cp -aL b c; ls -i1 c/b
74163295 a
74163295 b
Here's the patch:
From 7d350170ae78e1aca68aff81a08116109dd33be5 Mon Sep 17 00:00:00 2001
From: Jim Meyering meyer...@redhat.com
Date: Mon, 15 Jun 2009 09:10:50 +0200
Subject: [PATCH] doc: cp: describe an oddity of combining -H/-L and
--preserve=links
* doc/coreutils.texi (cp invocation) [-L]: Elaborate.
[--preserve=links]: Remove comments saying that we need documentation
for just this situation. Provide more explanation and examples.
Reported by Brian M. Carlson in http://bugs.debian.org/525048.
---
doc/coreutils.texi | 26 --
1 files changed, 24 insertions(+), 2 deletions(-)
diff --git a/doc/coreutils.texi b/doc/coreutils.texi
index 155858b..1806295 100644
--- a/doc/coreutils.texi
+++ b/doc/coreutils.texi
@@ -7388,6 +7388,9 @@ cp invocation
@opindex -L
@opindex --dereference
Follow symbolic links when copying from them.
+With this option, @command{cp} cannot create a symbolic link.
+For example, a symlink (to regular file) in the source tree will be copied to
+a regular file in the destination tree.
@item -n
@itemx --no-clobber
@@ -7435,8 +7438,27 @@ cp invocation
@itemx links
Preserve in the destination files
any links between corresponding source files.
-...@c Give examples illustrating how hard links are preserved.
-...@c Also, show how soft links map to hard links with -L and -H.
+Note that with @option{-L} or @option{-H}, this option can convert
+symbolic links to hard links. For example,
+...@example
+$ mkdir c; : a; ln -s a b; cp -aH a b c; ls -i1 c
+74161745 a
+74161745 b
+...@end example
+...@noindent
+Note the inputs: @file{b} is a symlink to regular file @file{a},
+yet the files in destination directory, @file{c/}, are hard-linked.
+Since @option{-a}
Bug#533135: freedoom: DFSG Violation: Copyrighted materials in Freedoom
* Mike Swanson mikeonthecompu...@gmail.com [2009-06-15 08:58:49 CEST]: I am the Freedoom maintainer and it has come to my attention that there have been copyrighted materials in Freedoom for some time, and this affects all of versions in current Debian distributions (oldstable, stable, testing, unstable, experimental). I seriously hope so that they are copyrighted - like everything else within Debian (besides so-called public domain software). The question rather is, what license are they distributed under. Do you have further insight into that? So long, and thanks! Rhonda -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533143: libsbuild-perl and sbuild: error when trying to install together
Package: sbuild,libsbuild-perl Version: sbuild/0.58.4-1 Version: libsbuild-perl/0.58.4-1 Severity: serious User: trei...@debian.org Usertags: edos-file-overwrite Date: 2009-06-15 Architecture: amd64 Distribution: sid Hi, automatic installation tests of packages that share a file and at the same time do not conflict by their package dependency relationships has detected the following problem: WARNING: The following packages cannot be authenticated! exim4-config exim4-base libpcre3 exim4-daemon-light exim4 patch perl-modules perl binutils bzip2 dctrl-tools make libtimedate-perl dpkg-dev devscripts libboost-system1.38.0 libboost-filesystem1.38.0 libboost-program-options1.38.0 libicu40 libboost-regex1.38.0 libfilesys-df-perl liblockdev1 schroot-common schroot libsbuild-perl sbuild Preconfiguring packages ... Authentication warning overridden. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously deselected package exim4-config. (Reading database ... 8198 files and directories currently installed.) Unpacking exim4-config (from .../exim4-config_4.69-11_all.deb) ... Selecting previously deselected package exim4-base. Unpacking exim4-base (from .../exim4-base_4.69-11_amd64.deb) ... Selecting previously deselected package libpcre3. Unpacking libpcre3 (from .../libpcre3_7.8-2_amd64.deb) ... Selecting previously deselected package exim4-daemon-light. Unpacking exim4-daemon-light (from .../exim4-daemon-light_4.69-11_amd64.deb) ... Selecting previously deselected package exim4. Unpacking exim4 (from .../archives/exim4_4.69-11_all.deb) ... Selecting previously deselected package patch. Unpacking patch (from .../patch_2.5.9-5_amd64.deb) ... Selecting previously deselected package perl-modules. Unpacking perl-modules (from .../perl-modules_5.10.0-23_all.deb) ... Selecting previously deselected package perl. Unpacking perl (from .../perl_5.10.0-23_amd64.deb) ... Selecting previously deselected package binutils. Unpacking binutils (from .../binutils_2.19.1-1_amd64.deb) ... Selecting previously deselected package bzip2. Unpacking bzip2 (from .../bzip2_1.0.5-2_amd64.deb) ... Selecting previously deselected package dctrl-tools. Unpacking dctrl-tools (from .../dctrl-tools_2.13.1_amd64.deb) ... Selecting previously deselected package make. Unpacking make (from .../archives/make_3.81-5_amd64.deb) ... Selecting previously deselected package libtimedate-perl. Unpacking libtimedate-perl (from .../libtimedate-perl_1.1600-9_all.deb) ... Selecting previously deselected package dpkg-dev. Unpacking dpkg-dev (from .../dpkg-dev_1.15.2_all.deb) ... Selecting previously deselected package devscripts. Unpacking devscripts (from .../devscripts_2.10.50_amd64.deb) ... Selecting previously deselected package libboost-system1.38.0. Unpacking libboost-system1.38.0 (from .../libboost-system1.38.0_1.38.0-6_amd64.deb) ... Selecting previously deselected package libboost-filesystem1.38.0. Unpacking libboost-filesystem1.38.0 (from .../libboost-filesystem1.38.0_1.38.0-6_amd64.deb) ... Selecting previously deselected package libboost-program-options1.38.0. Unpacking libboost-program-options1.38.0 (from .../libboost-program-options1.38.0_1.38.0-6_amd64.deb) ... Selecting previously deselected package libicu40. Unpacking libicu40 (from .../libicu40_4.0.1-2_amd64.deb) ... Selecting previously deselected package libboost-regex1.38.0. Unpacking libboost-regex1.38.0 (from .../libboost-regex1.38.0_1.38.0-6_amd64.deb) ... Selecting previously deselected package libfilesys-df-perl. Unpacking libfilesys-df-perl (from .../libfilesys-df-perl_0.92-3+b1_amd64.deb) ... Selecting previously deselected package liblockdev1. Unpacking liblockdev1 (from .../liblockdev1_1.0.3-1.2+b1_amd64.deb) ... Selecting previously deselected package schroot-common. Unpacking schroot-common (from .../schroot-common_1.2.3-1_all.deb) ... Selecting previously deselected package schroot. Unpacking schroot (from .../schroot_1.2.3-1_amd64.deb) ... Selecting previously deselected package libsbuild-perl. Unpacking libsbuild-perl (from .../libsbuild-perl_0.58.4-1_all.deb) ... Selecting previously deselected package sbuild. Unpacking sbuild (from .../sbuild_0.58.4-1_all.deb) ... dpkg: error processing /var/cache/apt/archives/sbuild_0.58.4-1_all.deb (--unpack): trying to overwrite `/usr/share/perl5/Sbuild/ChrootSchroot.pm', which is also in package libsbuild-perl dpkg-deb: subprocess paste killed by signal (Broken pipe) Processing triggers for man-db ... Errors were encountered while processing: /var/cache/apt/archives/sbuild_0.58.4-1_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) This is a serious bug as it makes installation fail. Possible solutions are to have the two packages conflict, to rename the common file in one of the two packages, or to remove the file from one package and have this package depend on the other package. File diversions or a Replace relation are another possibility. Here is a list of files that are
Bug#532743: beancounter: Adding Foreign Currencies
On Sat, Jun 13, 2009 at 05:52:04AM -0500, Dirk Eddelbuettel wrote:
sub portfolio_update {
my $res = shift;
if ($Config{fxupdate}) {
if ($Config{ubcfx}) {
UpdateFXviaUBC($dbh, $res);
} else {
UpdateFXDatabase($dbh, $res);
}
}
UpdateDatabase($dbh, $res) if $Config{equityupdate};
}
Made the change at line 863. I now have three currencies: USD, GBP and
SEK
On running beancounter update as part of my cron job the error this
morning was Found no GBP for 20090101 in the beancounter database.
GBP was added on Thursday
If I run
beancounter fxbackpopulate --prevdate 20090101 --date 20090612 GBP SEK
Then the error is:
No luck with symbol ^XBX
** Ignoring SEK which is not currently known to the internal tables
If I run
beancounter --ubcfx fxbackpopulate --prevdate 200901 --date 20090612
GBP SEK
Then no problems
If I run
beancounter plreport
Then I get the error
Found no GBP for 20081215 in the beancounter database.
--
Henry
Photocopies or faxes of my signature are not binding.
Digital Key Signature: GPG RSA 0xFB447AA1
Mon Jun 15 08:50:37 BST 2009
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#531979: libgphoto2: Please create hal fdi at build time
Hello again, Martin Pitt [2009-06-05 15:04 +0200]: Attached debdiff moves fdi creation into debian/rules to do it at build time. Sorry, the initial patch failed to set CAMLIBS, which caused the package to use the installed camera libs. Fixed patch attached. Martin -- Martin Pitt| http://www.piware.de Ubuntu Developer (www.ubuntu.com) | Debian Developer (www.debian.org) * Move hal fdi creation from debian/libgphoto2-2.postinst to debian/rules. This avoids problems with half-configured libraries during upgrade/installation (LP: #352271), and is generally more robust as well. diff -u libgphoto2-2.4.6/debian/rules libgphoto2-2.4.6/debian/rules --- libgphoto2-2.4.6/debian/rules +++ libgphoto2-2.4.6/debian/rules @@ -97,6 +97,11 @@ mkdir -p debian/libgphoto2-port0/lib/udev \ mv debian/tmp/usr/lib/udev/check-mtp-device \ debian/libgphoto2-port0/lib/udev/check-mtp-device + + # create hal FDI + mkdir -p debian/libgphoto2-$(major)/usr/share/hal/fdi/preprobe/10osvendor/ + CAMLIBS=`ls -d debian/libgphoto2-$(major)/usr/lib/libgphoto2/2*` ./packaging/generic/print-camera-list hal-fdi \ + debian/libgphoto2-$(major)/usr/share/hal/fdi/preprobe/10osvendor/20-libgphoto2.fdi endif # remove *.la files before trying to remove debian/tmp --- libgphoto2-2.4.6/debian/libgphoto2-2.postrm +++ libgphoto2-2.4.6/debian/libgphoto2-2.postrm @@ -10,7 +10,6 @@ rm -f /usr/share/hal/fdi/information/20thirdparty/$PACKAGE.fdi || /bin/true rm -f /usr/share/hal/fdi/information/10freedesktop/10-camera-$PACKAGE.fdi || /bin/true rm -f /usr/share/hal/fdi/information/10freedesktop/10-camera-$PACKAGE-device.fdi || /bin/true - rm -f /usr/share/hal/fdi/preprobe/10osvendor/20-$PACKAGE.fdi || /bin/true ;; disappear|upgrade|failed-upgrade|abort-install|abort-upgrade) diff -u libgphoto2-2.4.6/debian/libgphoto2-2.postinst libgphoto2-2.4.6/debian/libgphoto2-2.postinst --- libgphoto2-2.4.6/debian/libgphoto2-2.postinst +++ libgphoto2-2.4.6/debian/libgphoto2-2.postinst @@ -7,11 +7,6 @@ case $1 in configure) - # create FDI file - mkdir -p /usr/share/hal/fdi/preprobe/10osvendor/ || true - /usr/lib/$PACKAGE/print-camera-list hal-fdi \ - /usr/share/hal/fdi/preprobe/10osvendor/20-$PACKAGE.fdi - # remove old fdi files rm -f /usr/share/hal/fdi/information/10freedesktop/10-camera-$PACKAGE.fdi rm -f /usr/share/hal/fdi/information/20thirdparty/$PACKAGE.fdi signature.asc Description: Digital signature
Bug#533141: Current netatalk fails to build from source
-BEGIN PGP SIGNED MESSAGE- Hash: RIPEMD160 Hi Itai, On Mon, Jun 15, 2009 at 02:10:20AM -0500, Itai Seggev wrote: Okay, perhaps I am cluless or there's something seriously wrong with my system, but this has never failed me in the past. I am try to rebuild the package from source to enable openSSL. Going through the following apt-get source netatalk cd netatalk-2.0.4~rc2 dpkg-buildpackage (with or without DEB_BUILD_OPTIONS=openssl) will die with the following below. Do you have all build-dependencies installed? Especially libltdl3-dev? I recommend using the wrapper debuild instead of dpkg-buildpackage directly. It is found in the Debian package devscripts. BTW (and perhaps this should be its own separate bug), the README.Debian seems to suggest openssl support is not need to connect to OS X 10.4 and higher, but TimeMachine won't connect with the stock build. I'm not sure if I'm misunderstanding the readme me, it is wrong, or I have some misconfiguration. Yes, please file that as a separate bug. It might just be a documentation bug: README.Debian could very well be misleading as it hasn't been updated in a while - I recommend checking upstream documentation. But please do not comment on it here - file a separate bugreport, also if it turns out to be only a documentation issue. Thanks for your help reporting these things! - Jonas - -- * Jonas Smedegaard - idealist og Internet-arkitekt * Tlf.: +45 40843136 Website: http://dr.jones.dk/ [x] quote me freely [ ] ask before reusing [ ] keep private -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) iEYEAREDAAYFAko1/gkACgkQn7DbMsAkQLhwIACfVtQxrIiQNNMoGgDCKSMRL3WZ e0wAnifbzDY7WmOMA9ua37XtOCIHGOnb =g7PS -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#532759: unnecessarily strict dependency on lynx-cur
Hi Julien, On Thu, 11 Jun 2009 13:54:02 +0200, Julien Cristau wrote: The arch:all lynx package Depends: lynx-cur (= 2.8.7pre1-1), which means that the lynx package is uninstallable while waiting for buildds. For example, this means that currently xterm (which build-deps on lynx) can't be built on mipsel because lynx is uninstallable. And lynx-cur in turn can't be built waiting for openssh's build failure to be resolved. I think lynx should just depend on lynx-cur with no version (unless you want to fix #490265, which would be fine too). Sorry for any inconvenience but to make xterm build-depend on lynx-cur | lynx doesn't fix the problem? I think buid-depends on lynx is a bit awkward at present. Regards,2009-6-15(Mon) -- Debian Developer - much more I18N of Debian Atsuhito Kohda kohda AT debian.org Department of Math., Univ. of Tokushima -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533145: fillets-ng: new upstream release
Package: fillets-ng Version: 0.8.1-2 Severity: whishlist Upstream just released new version. I hope you can find some time to update the package. Upstream announce copied below. Thanks for considering. ___ Hi everybody, the Fish Fillets NG version 0.9.0 are ready for download: http://fillets.sourceforge.net/download.php Main changes: * Level 'linux' (by Mirek Olsak). * Level 'electromagnet' (by Stephan Barth). * Embedded intro video (thanks to Mirek Olsak). * Faster undo (hold -) (thanks to Mirek Olsak). * Redo (hold +). * Czech spoken dialogs for level 'keys' (thanks to Mirek Olsak). * Updated Bulgarian translation (by Damyan Ivanov). * Updated Swedish translation (by Olov Gustavsson). * Enhanced graphics for the NG levels (by Fank Skalicky). I hope you still like to play it :). -- dam signature.asc Description: Digital signature
Bug#533067: libc6-dev-i386 broken?
Aurelien Jarno wrote: There is no bug in libc6-dev-i386. In that case where are i386 libraries? libc6-dev-i386 contains only headers, so all attempts to build anything fail due to missing libc_nonshared.a, libc.so, libm.so, and others: gwy:/# dpkg -L libc6-dev-i386 /. /usr /usr/share /usr/share/doc /usr/share/doc/libc6-dev-i386 /usr/share/doc/libc6-dev-i386/copyright /usr/share/doc/libc6-dev-i386/changelog.Debian.gz /usr/include /usr/include/i486-linux-gnu /usr/include/gnu /usr/include/gnu/stubs-32.h /usr/include/sys /usr/include/sys/vm86.h /usr/include/sys/elf.h BTW, where is document saying that /emul is going away? I see this question repeated multiple times (f.e. in lib32z1 report), but no pointer to discussion or anything (and I cannot find anything on debian-devel either). Thanks, Petr -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#520479: zsnes on amd64
Hi, I've built zsnes on amd64 and hence I can offer a patch that works for that. However it's downright unusable because the sound is so bad when not using libao; we don't have a 32bit libao build available. JB. -- Julien BLACHE - Debian GNU/Linux Developer - jbla...@debian.org Public key available on http://www.jblache.org - KeyID: F5D6 5169 GPG Fingerprint : 935A 79F1 C8B3 3521 FD62 7CC7 CD61 4FD7 F5D6 5169 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#526489: Fwd: Re: Bug#526489: Time to orphan eclipse? (Bug#526489: eclipse: should this package be orphaned?)
Forwarded from -devel -- Forwarded Message -- Subject: Re: Bug#526489: Time to orphan eclipse? (Bug#526489: eclipse: should this package be orphaned?) Date: Mon, 15 Jun 2009 From: Ana Guerrero a...@debian.org To: Jerry Haltom was...@larvalstage.net, Michael Koch konque...@gmx.de, Matthias Klose d...@debian.org, Stephan Michels step...@apache.org On Wed, May 20, 2009 at 01:40:49AM +0200, Ana Guerrero wrote: I filed the quoted report almost 3 weeks ago. Resending to people listed as eclipse uploaders in case they did not get it. Third and last warning, I will orphan eclipse next saturday (20th June), so if somebody from the Java team is interested, please step up now. Usually, I would have orphaned the package already, but I was hoping from somebody from the team take over it. Sadly, I did not get a word from any of the uploaders (a i am not longer interested email would have been nice) or from somebody else from the team. For the record, even if the last version we have in Debian is 3.2.2, there was some work done (from one year ago) in the SVN for the version 3.4: http://svn.debian.org/wsvn/pkg-java/trunk/eclipse/debian/?op=logrev=0sc=0isdir=1 On Fri, May 01, 2009 at 04:33:20PM +0200, Ana Guerrero wrote: Package: eclipse Version: 3.2.2-6.1 Severity: important After being hit by #507536 (merged with #511713, #515747) and read http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=507536#104 I have been looking at the status of eclipse in Debian. Eclipse's packaging is under the umbrella of the Debian Java Maintainers, but it is currently lacking of a main maintainer. Latest maintainer upload was almost a year ago (8 May 2008), and the package has missed a few upstream releases (Current version is 3.4.2) since then. I am cc'ing all the people listed in the uploaders field, are you still interested in maintaining eclipse? Ana Original bug report at: http://bugs.debian.org/526489 -- To UNSUBSCRIBE, email to debian-devel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org --- -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533146: RM: nilfs2 -- RoM; mainlined 2.6.30
Package: ftp.debian.org Hi, please remove nilfs2, the module got mainlined with linux 2.6.30. Regards, Daniel -- Address:Daniel Baumann, Burgunderstrasse 3, CH-4562 Biberist Email: daniel.baum...@panthera-systems.net Internet: http://people.panthera-systems.net/~daniel-baumann/ -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533079: asterisk: start-stop-daemon should have --make-pid
Hi Fadion! On 14.06.2009 17:39, Faidon Liambotis wrote: Darshaka Pathirana wrote: #!/bin/sh set -e .. /usr/share/debconf/confmodule Copypaste mistake. The confmodule line should read like this: . /usr/share/debconf/confmodule --- /etc/init.d/asterisk.orig 2009-06-14 17:01:23.0 +0200 +++ /etc/init.d/asterisk2009-06-14 16:31:44.0 +0200 @@ -170,7 +170,7 @@ echo $DESC is already running. Use restart. exit 0 fi - start-stop-daemon --start --group $GROUP --pidfile $PIDFILE \ + start-stop-daemon --start --group $GROUP --make-pidfile --pidfile $PIDFILE \ $CHDIR_PARM \ --exec $REALDAEMON -- $PARAMS After adding the option my postinst-script run fine. That's incorrect. --make-pidfile is for programs that don't create their own pidfile. This is usually the wrong way to do things because of processes forking into the background and changing pids. Ok. It was just a guess after comparing the way how asterisk is started with RUNASTSAFE=yes. Asterisk creates its own pidfile, and there's no reason that we should switch from it to start-stop-daemon. Ok. Please note that running /etc/init.d/asterisk restart on the command line caused no problems. So there must be something wrong in combination with debconf. (But I have no idea what why.) Right, we'd have a much bigger issue if restart didn't work :-) I'm not sure what's the problem with your setup. I'll try to have a look with your example postinst at some point. Thx. That would be fine. Greetings, - Darsha -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533141: Current netatalk fails to build from source
2009/6/15 Itai Seggev is+deb...@cs.hmc.edu: Package: netatalk Version: 2.0.4~rc2-1 Severity: serious Okay, perhaps I am cluless or there's something seriously wrong with my system, but this has never failed me in the past. I am try to rebuild the package from source to enable openSSL. Please re-read the netatalk 2.0.4 release notes. For encrypted password support netatalk now can use libgcrypt instead of OpenSSL. libgcrypt is used by the DHX2 authentication mech. BTW (and perhaps this should be its own separate bug), the README.Debian seems to suggest openssl support is not need to connect to OS X 10.4 and higher, but TimeMachine won't connect with the stock build. I'm not sure if I'm misunderstanding the readme me, it is wrong, or I have some misconfiguration. Needed authentication mechanisms for certain OS X releases is an entirely different issue then TimeMachine support. 10.5 requires some encrypted password mech (DHX, DHX2, randnum, gss) while TimeMachine is not supported with 2.0.4. It will be in 2.1. Please remember to report upstream fixable issues upstream. -Frank -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533147: please do not depend on tomcat5.5
Package: maven-site-plugin Severity: important We would like to remove tomcat5.5 in favour of tomcat6 for squeeze (see #530724). Please either remove or downgrade the dependency on libtomcat5.5-java, change it to tomcat6, or eliminate the hard dependency on a container altogether. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.30-melech (SMP w/2 CPU cores; PREEMPT) Locale: LANG=sv_SE.UTF-8, LC_CTYPE=sv_SE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533148: please do not depend on tomcat5.5
Package: javahelp2 Severity: important We intend to remove tomcat5.5 from squeeze in favour of tomcat6. Please build the package against tomcat6 instead. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.30-melech (SMP w/2 CPU cores; PREEMPT) Locale: LANG=sv_SE.UTF-8, LC_CTYPE=sv_SE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533150: please do not depend on tomcat5.5
Package: libjboss-remoting-java Severity: important We intend to remove tomcat5.5 from squeeze in favour of tomcat6. Please build the package against tomcat6 instead. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.30-melech (SMP w/2 CPU cores; PREEMPT) Locale: LANG=sv_SE.UTF-8, LC_CTYPE=sv_SE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533149: please do not depend on tomcat5.5
Package: libajaxtags-java Severity: important We intend to remove tomcat5.5 from squeeze in favour of tomcat6. Please build the package against tomcat6 instead. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.30-melech (SMP w/2 CPU cores; PREEMPT) Locale: LANG=sv_SE.UTF-8, LC_CTYPE=sv_SE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533134: patch to fix this
The attached patch fixes this problem.
In this patch I removed the strerror() from the malloc() failure messages. It
seems very unlikely that strerror_r() will add any useful information to a
malloc() failure. However anything which uses memory has the potential to
fail after malloc() failure.
The ideal thing to do would be to have a special function to handle malloc()
failures in which you try to avoid allocating any memory. Then you can wrap
malloc(), calloc(), etc with functions such as xmalloc(), xcalloc(), etc and
the calling code won't even need to display an error message.
I would be happy to implement the ideal solution to this and some other issues
if you will take over upstream maintenance and make the Debian patches be
part of an official release. The Debian patches are becoming difficult to
manage and I don't want to increase their scope.
diff -ru libcsoap-1.1.0-old/libcsoap/soap-ctx.c libcsoap-1.1.0/libcsoap/soap-ctx.c
--- libcsoap-1.1.0-old/libcsoap/soap-ctx.c 2009-06-15 15:54:02.0 +1000
+++ libcsoap-1.1.0/libcsoap/soap-ctx.c 2009-06-15 16:09:06.0 +1000
@@ -48,7 +48,7 @@
if (!(ctx = (SoapCtx *) malloc(sizeof(SoapCtx
{
-log_error2(malloc failed (%s), strerror(errno));
+log_error1(malloc failed);
return NULL;
}
diff -ru libcsoap-1.1.0-old/libcsoap/soap-env.c libcsoap-1.1.0/libcsoap/soap-env.c
--- libcsoap-1.1.0-old/libcsoap/soap-env.c 2006-07-10 02:24:19.0 +1000
+++ libcsoap-1.1.0/libcsoap/soap-env.c 2009-06-15 16:09:30.0 +1000
@@ -181,7 +181,7 @@
if (!(env = (SoapEnv *) malloc(sizeof(SoapEnv
{
-log_error2(malloc failed (%s), strerror(errno));
+log_error1(malloc failed);
return herror_new(soap_env_from_doc, GENERAL_INVALID_PARAM, malloc failed);
}
diff -ru libcsoap-1.1.0-old/libcsoap/soap-router.c libcsoap-1.1.0/libcsoap/soap-router.c
--- libcsoap-1.1.0-old/libcsoap/soap-router.c 2006-07-10 02:24:19.0 +1000
+++ libcsoap-1.1.0/libcsoap/soap-router.c 2009-06-15 16:09:17.0 +1000
@@ -44,7 +44,7 @@
if (!(router = (SoapRouter *) malloc(sizeof(SoapRouter
{
-log_error2(malloc failed (%s), strerror(errno));
+log_error1(malloc failed);
return NULL;
}
memset(router, 0, sizeof(SoapRouter));
diff -ru libcsoap-1.1.0-old/libcsoap/soap-server.c libcsoap-1.1.0/libcsoap/soap-server.c
--- libcsoap-1.1.0-old/libcsoap/soap-server.c 2006-07-10 02:24:19.0 +1000
+++ libcsoap-1.1.0/libcsoap/soap-server.c 2009-06-15 16:09:25.0 +1000
@@ -211,7 +211,7 @@
if (!(node = (SoapRouterNode *) malloc(sizeof(SoapRouterNode {
-log_error2(malloc failed (%s), strerror(errno));
+log_error1(malloc failed);
return NULL;
}
diff -ru libcsoap-1.1.0-old/nanohttp/nanohttp-request.c libcsoap-1.1.0/nanohttp/nanohttp-request.c
--- libcsoap-1.1.0-old/nanohttp/nanohttp-request.c 2009-06-15 15:54:02.0 +1000
+++ libcsoap-1.1.0/nanohttp/nanohttp-request.c 2009-06-15 15:56:14.0 +1000
@@ -52,7 +52,7 @@
if (!(req = (hrequest_t *) malloc(sizeof(hrequest_t {
- log_error2(malloc failed (%s), strerror(errno));
+ log_error1(malloc failed);
return NULL;
}
@@ -175,7 +175,7 @@
{
if (!(tmppair = (hpair_t *) malloc(sizeof(hpair_t
{
- log_error2(malloc failed (%s), strerror(errno));
+ log_error1(malloc failed);
return NULL;
}
diff -ru libcsoap-1.1.0-old/nanohttp/nanohttp-response.c libcsoap-1.1.0/nanohttp/nanohttp-response.c
--- libcsoap-1.1.0-old/nanohttp/nanohttp-response.c 2006-07-10 02:24:19.0 +1000
+++ libcsoap-1.1.0/nanohttp/nanohttp-response.c 2009-06-15 16:00:43.0 +1000
@@ -53,7 +53,7 @@
/* create response object */
if (!(res = (hresponse_t *) malloc(sizeof(hresponse_t {
- log_error2(malloc failed (%s), strerror(errno));
+ log_error1(malloc failed);
return NULL;
}
diff -ru libcsoap-1.1.0-old/nanohttp/nanohttp-server.c libcsoap-1.1.0/nanohttp/nanohttp-server.c
--- libcsoap-1.1.0-old/nanohttp/nanohttp-server.c 2006-07-10 02:24:19.0 +1000
+++ libcsoap-1.1.0/nanohttp/nanohttp-server.c 2009-06-15 16:00:31.0 +1000
@@ -249,7 +249,7 @@
if (!(service = (hservice_t *) malloc(sizeof(hservice_t
{
-log_error2(malloc failed (%s), strerror(errno));
+log_error1(malloc failed);
return -1;
}
@@ -516,8 +516,7 @@
if (!(conn = (httpd_conn_t *) malloc(sizeof(httpd_conn_t
{
-
-log_error2(malloc failed (%s), strerror(errno));
+log_error1(malloc failed);
return NULL;
}
conn-sock = sock;
@@ -576,7 +575,7 @@
if (!(tmp = (char *) calloc(1, len)))
{
-log_error2(calloc failed (%s), strerror(errno));
+log_error1(calloc failed);
return -1;
}
@@ -968,7 +967,10 @@
pthread_sigmask(SIG_BLOCK, thrsigset, NULL);
if ((err =
pthread_create((conn-tid), (conn-attr), httpd_session_main, conn)))
-
Bug#521732: mutt tls_socket_write error -- imap_keepalive
On Sun, Jun 14, 2009 at 11:49:55PM +0100, Antonio Radici wrote: the last thing you send is at 19:26, then you get a RST at 19:36 from the IMAP server; if it's a firewall in the middle or IMAP itself that should not happen because your imap_keepalive is set at 10, so every ten seconds mutt should check your mailbox and keep the connection open, unfortunately it does not happen and this is clear from your tcpdump. Would it be worthwhile to run mutt in gdb with a breakpoint somewhere inside the imap_keepalive function (e.g. imap/util.c:709 imap_check_mailbox (ctx, NULL, 1); ) while monitoring the network traffic with e.g. wireshark? grtz Steven signature.asc Description: Digital signature
Bug#533151: screen: wrong handling of $STY
Package: screen Version: 4.0.3-13 Severity: normal hi, Screen does not start, but just returns and does nothing, if started from an xterm which is itself started from another screen. Problem is the $STY environment variable. Screen tries to contact the screen from $STY and does not start a new one as requested. michael -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.28-grml64 (SMP w/2 CPU cores; PREEMPT) Locale: LANG=en_US.iso885915, LC_CTYPE=en_US.iso885915 (charmap=ISO-8859-15) Shell: /bin/sh linked to /bin/bash Versions of packages screen depends on: ii libc6 2.7-16 GNU C Library: Shared libraries ii libncursesw5 5.6+20071013-1 Shared libraries for terminal hand ii libpam0g 0.99.7.1-3 Pluggable Authentication Modules l screen recommends no packages. screen suggests no packages. -- debconf information: screen/old_upgrade_prompt: false -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#521192: Could this be scheduled for 5.0.2
Hi, could this patch be scheduled for 5.0.2? It would help a lot since we then don't have to rebuild kernels after a security fix. The patch was picked from upstream and is unintrusive: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=320dcc30f498e0a8b282b14cf0feed1897ea3b34 Cheers, -- Guido -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533111: gstreamer0.10-ffmpeg: Breaks swfdec
Am Montag, den 15.06.2009, 00:06 +0200 schrieb Sven Arvidsson: Package: gstreamer0.10-ffmpeg Version: 0.10.7.2-1 Severity: normal Hi, The experimental version of gstreamer0.10-ffmpeg seems to break swfdec when it comes to playing back YouTube videos (and possibly other sites). I get this error message, afterwards the browser hangs: SWFDEC: ERROR: swfdec_video_decoder_gst.c(156): swfdec_video_decoder_gst_decode: failed to pull decoded buffer. Broken stream? Downgrading to the gstreamer0.10-ffmpeg version from unstable solves this problem. I'm not sure if this a GStreamer or swfdec bug, so please reassign if I filed it against the wrong package. Hi, does this happen for all youtube videos? If not, for which does it happen? Also, the best would be if you could file this bug upstream at bugzilla.gnome.org for GStreamer/gst-ffmpeg to make sure that 0.10.8 isn't released before this problem is solved. signature.asc Description: Dies ist ein digital signierter Nachrichtenteil
Bug#533067: libc6-dev-i386 broken?
Petr Vandrovec a écrit : Aurelien Jarno wrote: There is no bug in libc6-dev-i386. In that case where are i386 libraries? libc6-dev-i386 contains only headers, so all attempts to build anything fail due to missing libc_nonshared.a, libc.so, libm.so, and others: gwy:/# dpkg -L libc6-dev-i386 /. /usr /usr/share /usr/share/doc /usr/share/doc/libc6-dev-i386 /usr/share/doc/libc6-dev-i386/copyright /usr/share/doc/libc6-dev-i386/changelog.Debian.gz /usr/include /usr/include/i486-linux-gnu /usr/include/gnu /usr/include/gnu/stubs-32.h /usr/include/sys /usr/include/sys/vm86.h /usr/include/sys/elf.h This is a bug fixed in version 2.9-15. BTW, where is document saying that /emul is going away? I see this question repeated multiple times (f.e. in lib32z1 report), but no pointer to discussion or anything (and I cannot find anything on debian-devel either). It has been discussed on debian-devel a while ago. See http://lists.debian.org/debian-devel/2009/03/msg00597.html -- Aurelien Jarno GPG: 1024D/F1BCDB73 aurel...@aurel32.net http://www.aurel32.net -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533153: libalog-dev: should depend on gnat-4.3
Package: libalog-dev Version: 0.1-2 Severity: normal The development package libalog-dev requires gnat-4.3; it is useless without it and will not work with any other version of gnat-x.y because of Ada's consistency rules. gnat implements these rules by means of the checksums in the .ali files shipped in libalog-dev, which depend on those in gnat-4.3. The package should therefore encode this dependency in its control file. Similarly, the package should tighten its dependency on a certain version (or range of versions) of libahven-dev. Alternatively, a new version of libahven-dev that breaks compatibility should change its name. -- Ludovic Brenta. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533152: libahven-dev: should depend on gnat-4.3
Package: libahven-dev Version: 1.6-2 Severity: normal The development package libahven-dev requires gnat-4.3; it is useless without it and will not work with any other version of gnat-x.y because of Ada's consistency rules. gnat implements these rules by means of the checksums in the .ali files shipped in libahven-dev, which depend on those in gnat-4.3. The package should therefore encode this dependency in its control file. -- Ludovic Brenta. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#525345: php5-mysql: Loading both mysql and mysqli (default config) causes issues
Here's a very simple test case: $ php -r 'echo done\n;' This hangs after printing done if both the mysql.so and mysqli.so extensions are enabled. T-Mobile International AG Aufsichtsrat/ Supervisory Board: René Obermann (Vorsitzender/ Chairman) Vorstand/ Board of Management: Hamid Akhavan (Vorsitzender/ Chairman), Michael Günther Handelsregister/Commercial Register Entry: Amtsgericht Bonn, HRB 12276 Steuer-Nr./Tax No.: 205 / 5777/ 0518 USt.-ID./VAT Reg.No.: DE189669124 Sitz der Gesellschaft/ Corporate Headquarters: Bonn -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533155: libapq-common-dev: should depend on gnat-4.3
Package: libapq-common-dev Version: 3.0~b1-1 Severity: normal The development package libapq-common-dev requires gnat-4.3; it is useless without it and will not work with any other version of gnat-x.y because of Ada's consistency rules. gnat implements these rules by means of the checksums in the .ali files shipped in libapq-common-dev, which depend on those in gnat-4.3. The package should therefore encode this dependency in its control file. -- Ludovic Brenta. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533154: Persistent network interfaces:
Package: udev
Version: 0.125-7
What i do:
10 Network interfaces are in the system, for 8 of them the driver is
blacklisted (but was already used). I plug two additional ones.
Expected behavior (ifconfig -a)
Before: eth0-9
After temporary Blacklisting: eth0, 1
After plugging to new NICs:
eth0,1,10,11
Actual behavior:
Weired eth1_renamed stuff
I checked
/etc/udev/rules.d/70_persistent-net.rules
that is generated by:
/lib/udev/write_net_rules
# PCI device x (igb)
SUBSYSTEM==net, ACTION==add, DRIVERS==?*,
ATTR{address}==00:1b:xx, ATTR{type}==1, KERNEL==eth*,
NAME=eth9
# PCI device 0x1106:0x3106 (via-rhine)
SUBSYSTEM==net, ACTION==add, DRIVERS==?*,
ATTR{address}==00:0f:x, ATTR{type}==1, KERNEL==eth*,
NAME=eth1
# PCI device 0x1106:0x3106 (via-rhine)
SUBSYSTEM==net, ACTION==add, DRIVERS==?*,
ATTR{address}==00:0f:, ATTR{type}==1, KERNEL==eth*,
NAME=eth1
~
To me I looks lile that script write_net_rules can not use ethXX (with
two digits) properly and just cuts the second digit.
I am using Debian GNU/Linux 5.0.1.
Alexander
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#516094: ITP: libibcm -- Userspace InfiniBand Communication Manager
Hi Guy, On 13/06/09 at 17:03 +0100, Guy Coates wrote: I have a complete set of OFED packages. However, I am struggling to find a sponsor to upload the packages into debian. The packages+source are current hosted on alioth. You can find packages + docs on how to get started here: http://pkg-ofed.alioth.debian.org/ Please let me know how you get on. Any additions, bug reports / fixes etc gratefully received. Ouch, that's indeed quite a lot of packages. Are you willing to maintain them yourself on the long term? I could sponsor them, but would not actively help to maintain them (ie, I would only check that they don't seem too broken to be uploaded to Debian, but would really be helpful when dealing with bugs). I do have access to infiniband clusters, but haven't had to set them up myself, so my experience with infiniband is very limited. - Lucas -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533077: linux-image-2.6.26-2-486: on an idle system /dev/random gets depleted very quick
Package: linux-image-2.6.26-2-486
Version: 2.6.26-15
Severity: normal
On an idle system with nothing running except sshd, getty and 1 bash shell
(1 user logged in - myself), the entropy buffer of
/dev/random gets depleted very quick:
zolder:/tmp# ./a.out ; while true ; do echo `date` `cat
/proc/sys/kernel/random/entropy_avail` ; sleep 1 ; done0
[...]
Now add strace to those commands. Do you see the problem?
Nope, works as expected:
a.out
-
open(/dev/random, O_WRONLY) = 3
brk(0) = 0x87a4000
brk(0x87c7000) = 0x87c7000
ioctl(3, RNDADDENTROPY, 0x87a4008) = 0
cat /proc/sys/kernel/random/entropy_avail
-
open(/proc/sys/kernel/random/entropy_avail, O_RDONLY|O_LARGEFILE) = 3
fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
read(3, 701\n..., 32768) = 4
write(1, 701\n..., 4701
) = 4
read(3, ..., 32768) = 0
Folkert van Heusden
--
MultiTail er et flexible tool for å kontrolere Logfiles og commandoer.
Med filtrer, farger, sammenføringer, forskeliger ansikter etc.
http://www.vanheusden.com/multitail/
--
Phone: +31-6-41278122, PGP-key: 1F28D8AE, www.vanheusden.com
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#521732: mutt tls_socket_write error -- imap_keepalive
Steven Vancoillie wrote: Would it be worthwhile to run mutt in gdb with a breakpoint somewhere inside the imap_keepalive function (e.g. imap/util.c:709 imap_check_mailbox (ctx, NULL, 1); ) while monitoring the network traffic with e.g. wireshark? grtz Steven Actually you should be able to see the NOOP in .muttdebug0, which I'm not seeing... Unfortunately, as I said, there is no time/date there so I cannot correlate it with the tcpdump stream. There is a new version of mutt on mentors.debian.net which has the patch for time/date, probably you could use that and send me the .muttdebug0 + tcpstream so I can have a better look. Beside this, before the error happens do you use mutt or do you leave it open in a terminal? Do you leave it in the pager/index/compose mode? Do you use the keys often or is it just sleeping and then the error happens? Cheers Antonio -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533157: libpcscada-dev: should depend on gnat-4.3
Package: libpcscada-dev Version: 3.0b-9 Severity: normal The development package libpcscada-dev requires gnat-4.3; it is useless without it and will not work with any other version of gnat-x.y because of Ada's consistency rules. gnat implements these rules by means of the checksums in the .ali files shipped in libpcscada-dev, which depend on those in gnat-4.3. The package should therefore encode this dependency in its control file. -- Ludovic Brenta. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533156: libopentoken-dev: please tighten dependency on gnat to gnat-4.3
Package: libopentoken-dev Version: 3.0b-9 Severity: normal The development package libopentoken-dev requires gnat-4.3; it is useless without it and will not work with any other version of gnat-x.y because of Ada's consistency rules. gnat implements these rules by means of the checksums in the .ali files shipped in libopentoken-dev, which depend on those in gnat-4.3. The package should therefore encode this dependency in its control file. There are two possible ways: -Depends: gnat +Depends: gnat (= 4.3), gnat ( 4.4) or -Depends: gnat +Depends: gnat-4.3 The tightened dependency will correctly mark the package as broken when a user eventually replaces gnat-4.3 with gnat-4.4. -- Ludovic Brenta. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533098: [PATCH] Add gcc predefined macros to $Config{cppsymbols} on GNU/kFreeBSD.
This is needed at least by h2ph, otherwise the generated .ph files choke on missing __LONG_MAX__ and similar definitions. http://bugs.debian.org/533098 --- Configure |2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/Configure b/Configure index d50fa26..1dfb374 100755 --- a/Configure +++ b/Configure @@ -21384,7 +21384,7 @@ $eunicefix Cppsym.try ./Cppsym Cppsym.know Cppsym.true : Add in any linux cpp predefined macros: case $osname::$gccversion in - *linux*::*.*) + *linux*::*.*|*gnukfreebsd*::*.*) tHdrH=_tmpHdr rm -f $tHdrH'.h' $tHdrH touch $tHdrH'.h' -- 1.5.6.5 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#532271: Fixed problem at ubuntu
Here the same problem at Ubuntu. https://bugs.launchpad.net/ubuntu/+source/xml-core/+bug/256131 There the problem seems to be fixed. But with a ubuntu-package ... -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533046: live-initramfs: cron services in live system
Rui Bernardo wrote: Tested and confirmed working. anacron is linked and «dpkg-diverted» now: applied in git, thanks. Since there is really no point for doing that for neither of them (postfix nor exim4) I would suggest removing that line. it's an ubuntu legacy :) for debian it doesn't make sense to disable the daemon by default. if the users wants that, he can always do it by himself at build-time with an update-rc.d hook. -- Address:Daniel Baumann, Burgunderstrasse 3, CH-4562 Biberist Email: daniel.baum...@panthera-systems.net Internet: http://people.panthera-systems.net/~daniel-baumann/ -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533158: frama-c: long description no sentence
Package: frama-c Version: 20081201.dfsg-2 Severity: minor Hi! It would be nice if the long description of your package could consist of full sentences[1], the snippet in the first paragraph is missing its verb and its fullstop. Also please notice that unlike in the French language there is no whitespace infront of colons in English. ;) So long, and thanks for your great work nevertheless! Rhonda [1] http://www.us.debian.org/doc/developers-reference/best-pkging-practices#bpp-pkg-desc -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533159: haxe: Can't find zlib, it causes FTBFS
Package: haxe Version: 1:2.3-1 Severity: normal Tags: patch User: ubuntu-de...@lists.ubuntu.com Usertags: origin-ubuntu karmic ubuntu-patch *** /tmp/tmpV9Nlz2 In Ubuntu karmic build-env haxe FTBFS (buildlog here [1]), we've applied the attached patch to fix this. * debian/install_native.ml: - Update zlib search path to fix FTBFS. [1] http://launchpadlibrarian.net/27368932/buildlog_ubuntu-karmic-i386.haxe_1%3A2.3-1_FAILEDTOBUILD.txt.gz -- System Information: Debian Release: 5.0 APT prefers jaunty-updates APT policy: (500, 'jaunty-updates'), (500, 'jaunty-security'), (500, 'jaunty-backports'), (500, 'jaunty') Architecture: i386 (i686) Kernel: Linux 2.6.30-020630rc5-generic (SMP w/2 CPU cores) Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash diff -u haxe-2.3/debian/install_native.ml haxe-2.3/debian/install_native.ml --- haxe-2.3/debian/install_native.ml +++ haxe-2.3/debian/install_native.ml @@ -38,7 +38,7 @@ let zlib = try - List.find Sys.file_exists [/usr/lib64/libz.so.1;/usr/lib/libz.so.1] + List.find Sys.file_exists [/usr/lib64/libz.so.1;/usr/lib/libz.so.1;/usr/lib/libz.so] with Not_found - failwith LibZ was not found on your system, please install it or modify the search directories in the install script
Bug#375530: annexing micturated coloration meerry
intermodule wlied orthopaedics heteroecism -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#531522: [Pkg-openmpi-maintainers] Bug#531522: Bug#531419: mpicc segfaults when called by fakeroot
Hello guys, Le dimanche 14 juin 2009 à 11:19 -0500, Steve M. Robbins a écrit : On Sun, Jun 14, 2009 at 05:10:46PM +0200, Manuel Prinz wrote: Hi everyone! On Fri, June 12, 2009 11:10 pm, Jeff Squyres wrote: Agreed. We thought that stat() was safe to call in the malloc init hook -- it seems to be in most other places, at least. Jeff, I agree that one would expect stat() to be safe; my comment about crafty things wasn't intended as a judgement call on this approach. I think the code is pretty clever, but it's a hard problem when you are operating with no clear rules about what is permitted in the init hook. :-) Unfortunately, I will not be able to use the internet for a week from now. This means that I can't help fixing the issue. I'm very sorry about that! I hope Sylvestre can take over. If one wants to (or can) work out a fix, feel free to NMU. If Sylvestre wants to upload a fix, that's perfect. Otherwise, I can easily convert my #if 0 hack into a patch that checks for an environment variable. Jeff previously suggested setting OMPI_MCA_disable_memory_allocator; is that the variable we want to use? I am only following the bug report. I haven't dig enough to be able to fix it right now. Therefor, if someone provides a patch, I will be happy to upload OpenMPI with the fix/workaround. Otherwise, I will try to find some time to fix it. Sylvestre -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533160: openvpn[18267]: segfault ... in libc-2.3.6.so
Package: openvpn Version: 2.0.9-4etch1 Severity: important openvpn exits with openvpn[18267]: segfault at a13601c ip b7d068dc sp bf8b0598 error 6 in libc-2.3.6.so[b7ca+128000] from dmesg, after some usage. Can't see a clear pattern, I'm just running an ssh session over the VPN UDP link; it works fine but gets killed with SIG11 form time to time. A manual restart is needed (or a suitable watchdog script of course). thx -- paolo -- System Information: Debian Release: 4.0 APT prefers oldstable APT policy: (500, 'oldstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.29.4-toi3.0.1-dm-sa-nb-pm.9 Locale: LANG=it_IT, LC_CTYPE=it_IT (charmap=ISO-8859-1) Versions of packages openvpn depends on: ii debconf [debconf-2. 1.5.11etch2 Debian configuration management sy ii libc6 2.3.6.ds1-13etch9+b1 GNU C Library: Shared libraries ii liblzo2-2 2.02-2 data compression library ii libssl0.9.8 0.9.8c-4etch5SSL shared libraries openvpn recommends no packages. -- debconf information excluded -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#532471: ip= boot parameter wrongly documented in man live-initramfs
tags 532471 +pending thanks Fixed in git, thanks. -- Address:Daniel Baumann, Burgunderstrasse 3, CH-4562 Biberist Email: daniel.baum...@panthera-systems.net Internet: http://people.panthera-systems.net/~daniel-baumann/ -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#532908: initramfs-tools: initrd image not created on custom kernels
On Mon, Jun 15, 2009 at 11:17:26AM +0530, Ritesh Raj Sarraf wrote: The /etc/kernel/postinst.d/ folder contains one hook, initramfs-tools. I suppose, you are shipping it. initramfs-tools is shipping it indeed. I don't know why you have enabled the second check: # kernel-package passes an extra arg; hack to not run under kernel-package #[ -z $2 ] || exit 0 Disabling it and doing the installation creates the initrd image properly. explained in debian/changelog, by disabling the check you have busted now the ability to install linux-2.6 officialy build linux images. so status stays the same people that care about kernel-package, should come forward with a good patch. over and out -- maks -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#493860: mirror listing update for ftp.mgts.by
Simon Paillard wrote: Please switch to ftpsync for these 3 archives, follow http://debian.org/mirror/ftpmirror#how Such a script is required to keep the archive consistent for user during the mirror's sync. ok, i've switched IPv6: no Archive-upstream: ftp.us.debian.org There are many european mirrors around: ftp.pl.debian.org, ftp.de, ftp.hr. You may certainly get higher speed from them rather than overseas links. for now, i'm syncing with ftp.pl -- With best regards, Evgeniy Kozhuhovskiy Leader, Services team Minsk State Phone Network, RUE Beltelecom. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#532766: please make mutt not modify message on saving or copying (content-length, lines)
Hallo Hartmut, Am 2009-06-15 09:22:24, schrieb Helmut Grohne: Thanks for your quick answer. Could you give any reference for this statement? The statement is practically untrue. This is from the RFC's about Mailheaders, and it is also written, that the the receiver should not expect, that ALL headers are available. Also messages are often needed verbatim (for instance for reporting spam). Why should a message change, only because it got moved from one mailbox to another? The message is changed the first time when you access it and I even have not accessed a message and found Content-Lenght: header in message which where only accessed by libnet-imap-simple-perl. I do not believe, the perllib has put the header into the message. Are you sure, it is mutt who is adding the Content-Lenght: header? Fortunately the patch only improves the situation: There is no point in adding these headers for Maildir or imap and other storages are unchanged. (It would also save about 1MB diskspace for me.) Ehm, with one header? I asume, 32 Bytes per message which mean 32k messages. I feel this like a joke... I have on my server arround 48 million messages and it is only 1.4 GByte. And I do not belive the 32bytes additional size will hit your filesystem be exceeding the blocksize usage... e.g. 32k msg * 4kB/block = 128MByte Thanks, Greetings and nice Day/Evening Michelle Konzack Systemadministrator Tamay Dogan Network Debian GNU/Linux Consultant -- Linux-User #280138 with the Linux Counter, http://counter.li.org/ # Debian GNU/Linux Consultant # Michelle Konzack Apt. 917 ICQ #328449886 +49/177/935194750, rue de Soultz MSN LinuxMichi +33/6/61925193 67100 Strasbourg/France IRC #Debian (irc.icq.com) signature.pgp Description: Digital signature
Bug#378290: Contact List of business owners in America
Fields such as contact names and positions, complete decription of the business, number of employees, years in business etc.. All data is verified, optin and there are 2 million emails in total Price for new customers - $290 - for this week reply to: lu...@listsourcesworld.com to stop this email in future email us at e...@listsourcesworld.com -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#521732: mutt tls_socket_write error -- imap_keepalive
On Mon, Jun 15, 2009 at 09:55:15AM +0100, antonio wrote: There is a new version of mutt on mentors.debian.net which has the patch for time/date, probably you could use that and send me the .muttdebug0 + tcpstream so I can have a better look. I will try. Beside this, before the error happens do you use mutt or do you leave it open in a terminal? Do you leave it in the pager/index/compose mode? Do you use the keys often or is it just sleeping and then the error happens? Mostly I just leave it open in a terminal in the pager or index mode without touching any keys. grtz Steven signature.asc Description: Digital signature
Bug#533077: linux-image-2.6.26-2-486: on an idle system /dev/random gets depleted very quick
On Mon, Jun 15, 2009 at 10:47:43AM +0200, Folkert van Heusden wrote: Now add strace to those commands. Do you see the problem? Nope, works as expected: You have different libs than we all have. Ours shows: | open(/dev/urandom, O_RDONLY) = 3 | read(3, \34\344C\242, 4) = 4 | close(3)= 0 Bastian -- Not one hundred percent efficient, of course ... but nothing ever is. -- Kirk, Metamorphosis, stardate 3219.8 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#529952: libfox1.4-dev: please upgrade dependencies CUPSYS - CUPS
On Sat, May 23, 2009 at 1:30 AM, Torsten Landschofft.landsch...@gmx.net wrote: On Fri, May 22, 2009 at 04:23:49PM +0300, Martin-Éric Racine wrote: *cupsys* to *cups* and the software against which this bug was file is one that still depends upon the transitional packages. Please upgrade your debian/control accordingly and perform a new upload ASAP. Thanks! I think libfox1.4 can safely be removed from unstable as it is quite old already. I'll file a appropriate bug against ftp.debian.org once I am back home. Hello Torsten, Has libfox1.4 already been removed? Cheers! Martin-Éric -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#514061: Your package
Your package is registered with us for mailing by the Online Lottery Award Promo Board in England, United Kingdom. We are sending you this email because your package is been registered on a Special Order. What you have to do now, is to write back to the Delivery Department for immediate displacement of your package to your residential address. Kindly contact our dispatch officer incharge of your parcel with the folloing informations for re-confirmation: Your Full Names,Address,Telephone,Country,Occupation Mrs. Sandra White Email: dhldeliv...@8u8.com Tel:+447031996945 DHL Online Team Management © 1995 - 2009 DHL Note that as soon as our Delivery Team confirms your Informations, it will take only one working day (24 hours) for your package to arrive its designated destination. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#406417: i810: DualHead fails to resume after suspend
Hello, the issue seems to be solved with latest testing/unstable packages. Greets, Peter Brice Goglin schrieb: On Thu, Jan 11, 2007 at 12:30:20AM +0100, Peter Niederlag wrote: Package: xorg Version: 1:7.1.0-9 Severity: normal Hi, after the latest updates of the xorg and xutils packages my Laptop-Monitor stays dark when returnning from suspend to memory. It had been a very nice working Dual-Head(Xinerama) Configuration with the i810 driver. Now it requires a reboot. Does this still happen with latest intel driver from Lenny? And from unstable or experimental? Brice -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#532562: linux-image-2.6.26-2-versatile: Kernel panics randomly while using apt-get
The error also occurs with linux-image-2.6.28-11-versatile from http://launchpadlibrarian.net/25604477/linux-image-2.6.28-11-versatile_2.6.28-11.42_armel.deb. I guess the problem is on qemu... -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533161: qgit eats up all available ram and swap, stalling the system.
Subject: qgit eats up all available ram and swap, stalling the system. Package: qgit Version: 2.2-1 Justification: breaks the whole system Severity: critical *** Please type your report below this line *** I have etckeeper working with git. On launching qgit it stays put, doesn't display the git tree, but starts eating up all available memory. If not killed promptly it brings down the whole system (4GB ram) in less than a minute. On the same system I have a working KDE4 installation, and cola or gitg work fine as git gui. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (101, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.29.4-vanilla64 (SMP w/2 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages qgit depends on: ii git-core 1:1.6.3.1-1 fast, scalable, distributed revisi ii libc62.9-12 GNU C Library: Shared libraries ii libgcc1 1:4.4.0-5 GCC support library ii libqtcore4 4.5.1-2 Qt 4 core module ii libqtgui44.5.1-2 Qt 4 GUI module ii libstdc++6 4.4.0-5 The GNU Standard C++ Library v3 ii libx11-6 2:1.2.1-1 X11 client-side library ii libxext6 2:1.0.4-1 X11 miscellaneous extension librar Versions of packages qgit recommends: ii stgit 0.14.2-1 manage stacks of patches in a git qgit suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#529943: education-networked: closed in CVS != closed in archive; please re-open
Package: education-networked Severity: normal 8) #529943 education-networked: please upgrade Recommends:cupsys to Recommen 9) #529945 education-desktop-other: please upgrade dependencies from cupsys* Please note that until an actual upload has happened that fixes the packages *in*the*archive* these bugs cannot be closed! -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#532562: linux-image-2.6.26-2-versatile: Kernel panics randomly while using apt-get
Axel Allende Lira a écrit : Axel Allende Lira escreveu: Hi there. I managed to track the error while doing a removal for orphaned packages. Here's the log: r...@terrier:/home/axel# deborphan libart-2.0-2 libgnomecups1.0-1 libgnomeprint2.2-data libaiksaurus-1.2-data libgail-common r...@terrier:/home/axel# apt-get remove `deborphan` Lendo listas de pacotes... Pronto Construindo árvore de dependências Lendo informação de estado... Pronto [0.00] sym0: unexpected disconnect lsi_scsi: error: Reselect with pending DMA [0.00] Unable to handle kernel NULL pointer dereference at virtual address 0358 [0.00] pgd = c7f4c000 [0.00] [0358] *pgd=07f4b031, *pte=, *ppte= [0.00] Internal error: Oops: 17 [#1] [0.00] Modules linked in: nls_utf8 isofs zlib_inflate udf nls_base crc_itu_t smc91x psmouse ext3 jbd mbcache sg sr_mod cdrom sd_mod sym53c8xx scsi_transport_spi scsi_mod [0.00] CPU: 0Not tainted (2.6.26-2-versatile #1) [0.00] PC is at sym_interrupt+0x968/0x18d8 [sym53c8xx] [0.00] LR is at sym_interrupt+0x348/0x18d8 [sym53c8xx] [0.00] pc : [bf033854]lr : [bf033234]psr: 8113 [0.00] sp : c7247e38 ip : c7247e38 fp : c7247e9c [0.00] r10: c0850c00 r9 : ffd00084 r8 : 0001 [0.00] r7 : bf03d640 r6 : r5 : ffd0 r4 : 000b [0.00] r3 : 000a r2 : 002c r1 : r0 : [0.00] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [0.00] Control: 00093177 Table: 07f4c000 DAC: 0015 [0.00] Process apt-get (pid: 1770, stack limit = 0xc7246268) [0.00] Stack: (0xc7247e38 to 0xc7248000) [0.00] 7e20:c7247e5c c7247e48 [0.00] 7e40: bf000604 bf000558 205d3030 c7c11800 c7247e74 c7247e60 bf02e6bc bf0005e8 [0.00] 7e60: c085cbc0 c7247e94 c7247e78 bf0322a4 c0850c00 bf03d640 [0.00] 7e80: 001b 000258f0 c7246000 bec95e24 c7247ebc c7247ea0 bf02e8e4 bf032ef8 [0.00] 7ea0: c7247ecc c086c2c0 c7247edc c7247ec0 c006f934 bf02e8a8 [0.00] 7ec0: c02897f8 001b c7247fb0 bec95e38 c7247ef4 c7247ee0 c0071250 c006f8fc [0.00] 7ee0: 001b c02897f8 c7247f14 c7247ef8 c0024048 c00711c8 bf000540 [0.00] 7f00: f114 0001 c7247f7c c7247f18 c00246b4 c002400c 001b c7246000 [0.00] 7f20: c02bbba0 2113 0010 c02897f8 000a bec95e38 000258f0 c7246000 [0.00] 7f40: bec95e24 c7247f7c c7247f80 c7247f60 c0047680 c00472cc 2113 [0.00] 7f60: c7246000 001b c02897f8 c7247f8c c7247f80 c0047680 c0047290 [0.00] 7f80: c7247fac c7247f90 c002404c c0047648 403a4064 f114 0001 [0.00] 7fa0: c7247fb0 c00248a4 c002400c 00026760 404f1000 408715e0 003b [0.00] 7fc0: 0001 bec95e30 bec95e38 000258f0 400d7b1c bec95e24 0d20 [0.00] 7fe0: 003b bec95d08 4005f36c 4005f36c 8010 [0.00] Backtrace: [0.00] [bf032eec] (sym_interrupt+0x0/0x18d8 [sym53c8xx]) from [bf02e8e4] (sym53c8xx_intr+0x48/0x74 [sym53c8xx]) [0.00] [bf02e89c] (sym53c8xx_intr+0x0/0x74 [sym53c8xx]) from [c006f934] (handle_IRQ_event+0x44/0x84) [0.00] r6: r5: r4:c086c2c0 [0.00] [c006f8f0] (handle_IRQ_event+0x0/0x84) from [c0071250] (handle_level_irq+0x94/0xec) [0.00] r7:bec95e38 r6:c7247fb0 r5:001b r4:c02897f8 [0.00] [c00711bc] (handle_level_irq+0x0/0xec) from [c0024048] (__exception_text_start+0x48/0x64) [0.00] r5:c02897f8 r4:001b [0.00] [c0024000] (__exception_text_start+0x0/0x64) from [c00246b4] (__irq_svc+0x34/0xa0) [0.00] Exception stack(0xc7247f18 to 0xc7247f60) [0.00] 7f00:001b c7246000 [0.00] 7f20: c02bbba0 2113 0010 c02897f8 000a bec95e38 000258f0 c7246000 [0.00] 7f40: bec95e24 c7247f7c c7247f80 c7247f60 c0047680 c00472cc 2113 [0.00] r6:0001 r5:f114 r4: [0.00] [c0047284] (__do_softirq+0x0/0xd4) from [c0047680] (irq_exit+0x44/0x4c) [0.00] r6: r5:c02897f8 r4:001b [0.00] [c004763c] (irq_exit+0x0/0x4c) from [c002404c] (__exception_text_start+0x4c/0x64) [0.00] [c0024000] (__exception_text_start+0x0/0x64) from [c00248a4] (__irq_usr+0x44/0xa0) [0.00] Exception stack(0xc7247fb0 to 0xc7247ff8) [0.00] 7fa0: 00026760 404f1000 408715e0 003b [0.00] 7fc0: 0001 bec95e30 bec95e38 000258f0 400d7b1c bec95e24 0d20 [0.00] 7fe0: 003b bec95d08 4005f36c 4005f36c 8010 [0.00] r6:0001 r5:f114 r4: [0.00] Code: e1a01000 e5932000
Bug#457279: Change package to RFA or O
Hi, I renew th Alessandro De Zorzi's invitation to Maintainer for set RFA or O the package and allow contributions. Francesco Zanolin begin:vcard fn:Francesco Zanolin n:Zanolin;Francesco org:Istituto Nazionale di Geofisica e Vulcanologia;Centro Nazionale Terremoti adr:;;Via di Vigna Murata 605;Roma;Roma;00143;Italy email;internet:francesco.zano...@ingv.it title:Collaboratore Tecnico Enti di Ricerca tel;work:0651860346 tel;fax:0651860541 x-mozilla-html:FALSE url:http://www.ingv.it version:2.1 end:vcard
Bug#533077: linux-image-2.6.26-2-486: on an idle system /dev/random gets depleted very quick
Bastian Blank a écrit : On Mon, Jun 15, 2009 at 10:47:43AM +0200, Folkert van Heusden wrote: Now add strace to those commands. Do you see the problem? Nope, works as expected: You have different libs than we all have. Ours shows: | open(/dev/urandom, O_RDONLY) = 3 | read(3, \34\344C\242, 4) = 4 | close(3)= 0 Note that it is fixed in glibc 2.10 with kernels = 2.6.29. -- Aurelien Jarno GPG: 1024D/F1BCDB73 aurel...@aurel32.net http://www.aurel32.net -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#532271: Recover of the problem
Please look also at http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=482140 The main point at the upgrade seems to be this, as described at Ubuntu: Here is what's happening: - The scrollkeeper entry should unregistered in scrollkeeper prerm script. - But for some reason the call to update-xmlcatalog fails with the following perl error: Removing scrollkeeper ... Can't locate File/Spec/Functions.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /usr/sbin/update-xmlcatalog line 124. BEGIN failed--compilation aborted at /usr/sbin/update-xmlcatalog line 124. Can't locate File/Spec/Functions.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /usr/sbin/update-xmlcatalog line 124. BEGIN failed--compilation aborted at /usr/sbin/update-xmlcatalog line 124. - Then, the call to update-xmlcatalog during rarian installation fails because it can't register the same entity for different packages. Now we have to find out why it can't locate Functions.pm For me i could recover the problem now with: apt-get purge rarian-compat apt-get install rarian-compat -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#532970: jocaml and use topfind
Guillaume Yziquel a écrit : Mehdi Dogguy a écrit : This another bug. The point of Guillaume is that #use topfind is not working not that the toplevel library doesn't work. I admit that the two problems are related but somehow completely different. My point was indeed that the topfind script relies on the toploop.cmi interface. Not finding in jocaml, it looks for it in ocaml. Ack. But it wasn't clear… Next upload of JoCaml will (at least) install the toplevel library (already fixed in Git). I'll look at the ocamlfind problem when I find time. I'm leaving this bug open as a reminder. Cheers, -- Mehdi Dogguy مهدي الدڤي http://www.pps.jussieu.fr/~dogguy Tel.: (+33).1.44.27.28.38 -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533077: linux-image-2.6.26-2-486: on an idle system /dev/random gets depleted very quick
Now add strace to those commands. Do you see the problem? Nope, works as expected: You have different libs than we all have. Ours shows: | open(/dev/urandom, O_RDONLY) = 3 | read(3, \34\344C\242, 4) = 4 | close(3)= 0 Oh wait! Yes, I now see what you mean. Indeed glibc seems to fetch bytes from urandom each invocation. Thanks for your support! Folkert van Heusden -- MultiTail is a versatile tool for watching logfiles and output of commands. Filtering, coloring, merging, diff-view, etc. http://www.vanheusden.com/multitail/ -- Phone: +31-6-41278122, PGP-key: 1F28D8AE, www.vanheusden.com -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#521824: live-helper: lh config call produces wrong configurations compared to lh_config
tags 521824 +pending thanks fixed in git. -- Address:Daniel Baumann, Burgunderstrasse 3, CH-4562 Biberist Email: daniel.baum...@panthera-systems.net Internet: http://people.panthera-systems.net/~daniel-baumann/ -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533162: gnome-terminal: gnome terminal complains when exiting with a running ssh session
Package: gnome-terminal Version: 2.26.2-1 Severity: important When closing a gnome-terminal through the window manage close button while running a ssh session it requires a highly annoying confirmation to really close it. This makes gnome-terminal unuseable for managing lots of temporary remote ssh sessions. Before the last update from the testing repositories this behaviour was not present. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.29 (SMP w/2 CPU cores) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) (ignored: LC_ALL set to C) Shell: /bin/sh linked to /bin/bash Versions of packages gnome-terminal depends on: ii gnome-terminal-data 2.26.2-1Data files for the GNOME terminal ii libatk1.0-0 1.26.0-1The ATK accessibility toolkit ii libc62.9-12 GNU C Library: Shared libraries ii libdbus-glib-1-2 0.80-4 simple interprocess messaging syst ii libgconf2-4 2.26.2-1GNOME configuration database syste ii libglib2.0-0 2.20.1-2The GLib library of C routines ii libgtk2.0-0 2.16.1-2The GTK+ graphical user interface ii libice6 2:1.0.5-1 X11 Inter-Client Exchange library ii libpango1.0-01.24.0-3+b1 Layout and rendering of internatio ii libsm6 2:1.1.0-2 X11 Session Management library ii libstartup-notification0 0.10-1 library for program launch feedbac ii libvte9 1:0.20.1-1 Terminal emulator widget for GTK+ ii libx11-6 2:1.2.1-1 X11 client-side library Versions of packages gnome-terminal recommends: ii gvfs 1.2.2-2userspace virtual filesystem - ser ii yelp 2.24.0-2 Help browser for GNOME 2 gnome-terminal suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#532953: bzip2: doesnt update cleanly
Hi, On Sat, Jun 13, 2009 at 09:09:08AM +0200, Jean-Luc Coulon (f5ibh) wrote: Package: bzip2 Version: 1.0.5-2 Severity: normal Hi, Update to 1.0.5-2 is not clean. I get the following: Unexpected number of arguments to --control debsums: can't extract control info from /var/cache/apt/archives/bzip2_1.0.5-2_amd64.deb E: Problem executing scripts DPkg::Post-Invoke 'if [ -x /usr/bin/debsums ]; then /usr/bin/debsums --generate=nocheck -sp /var/cache/apt/archives; fi' E: Sub-process returned an error code I can't reproduce it. I've just updated from 1.0.5-1 to -2 without problems. Regards Jean-Luc Regards, Santiago signature.asc Description: Digital signature
Bug#448215: has the transition to playbin2 been done?
In other words, is this still an issue? Martin-Éric -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533163: nvidia-glx: fails to start Xserver after upgrade to 185.18.14-1 with unknown reason
Package: nvidia-glx Version: 185.18.14-1 Severity: important After yesterday's upgrade of nvidia-glx 185.18.14-1 (and of course building new nvidia-kernel-source module) , my Xserver fails to start. I am using Thinkpad T61 with Nvidia Quadro 140 It looks like it's normally starting, for about five times Nvidia logo flashes over screen, but always disappears and after about a minute Xserver dialog about start failure appears Adding Xorg log and my xorg.conf, though I am still using it My Xserver works when started with command startx by root (user is not privileged and I don't know how to fix this) _or_ with vesa driver instead of nvidia (but in horrible 800x600 resolution) Thanks Jakub -- Package-specific info: uname -r: Linux gondolin 2.6.29-2-686 #1 SMP Sun May 17 17:56:29 UTC 2009 i686 GNU/Linux /proc/version: Linux version 2.6.29-2-686 (Debian 2.6.29-5) (wa...@debian.org) (gcc version 4.3.3 (Debian 4.3.3-10) ) #1 SMP Sun May 17 17:56:29 UTC 2009 /proc/driver/nvidia/version: 01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 140M (rev a1) -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (990, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.29-2-686 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages nvidia-glx depends on: ii libc6 2.9-13 GNU C Library: Shared libraries ii libgcc1 1:4.4.0-5GCC support library ii libgl1-mesa-glx [li 7.4.1-1 A free implementation of the OpenG ii libx11-62:1.2.1-1X11 client-side library ii libxext62:1.0.4-1X11 miscellaneous extension librar ii nvidia-kernel-2.6.2 185.18.14-1+2.6.29-5 NVIDIA binary kernel module for Li ii x11-common 1:7.4+3 X Window System (X.Org) infrastruc ii xlibmesa-gl 1:7.4+3 transitional package for Debian et ii zlib1g 1:1.2.3.3.dfsg-13compression library - runtime nvidia-glx recommends no packages. Versions of packages nvidia-glx suggests: ii nvidia-kernel-source 185.18.14-1 NVIDIA binary kernel module source ii nvidia-settings 180.22-1Tool of configuring the NVIDIA gra -- no debconf information This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the xorg product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.6.1.901 (1.6.2 RC 1) Release Date: 2009-5-8 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.26-2-686 i686 Debian Current Operating System: Linux gondolin 2.6.29-2-686 #1 SMP Sun May 17 17:56:29 UTC 2009 i686 Build Date: 14 May 2009 05:49:41PM xorg-server 2:1.6.1.901-2 (jcris...@debian.org) Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/Xorg.0.log, Time: Mon Jun 15 11:51:13 2009 (==) Using config file: /etc/X11/xorg.conf (==) ServerLayout Default Layout (**) |--Screen Default Screen (0) (**) | |--Monitor Generic Monitor (**) | |--Device nVidia Corporation NVIDIA Default Card (**) |--Input Device Generic Keyboard (**) |--Input Device Configured Mouse (**) |--Input Device Synaptics Touchpad (**) Option DontZap false (==) Automatically adding devices (==) Automatically enabling devices (WW) The directory /usr/X11R6/lib/X11/fonts/misc does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/cyrillic does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/100dpi/ does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/75dpi/ does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/Type1 does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/100dpi does not exist. Entry deleted from font path. (WW) The directory /usr/X11R6/lib/X11/fonts/75dpi does not exist. Entry deleted from font path. (WW) The directory /usr/share/fonts/X11/cyrillic does not exist. Entry deleted from font path. (**) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/truetype/non-packaged, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled,
Bug#533166: gdmflexiserver fails silently
Package: gdm Version: 2.20.9-1 Severity: important Attempting to run a nested desktop with: /usr/share/gdm/applications/gdmflexiserver-xnest.desktop fails silently. The same is true when using the System-Log Out-Switch User menu option in GNOME. I was unable to locate any error messages in any system logs, as the default audit level in the gdm configuration appears to be 0. However, some manual investigation with both Xnest and Xephyr shows that this is some kind of authorization error: $ Xnest :22 xterm -display :22 [1] 19632 [2] 19633 u...@localhost:~$ Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list! AUDIT: Mon Jun 15 02:33:03 2009: 19632 Xnest: client 1 rejected from local host (uid 2000) No protocol specified xterm Xt error: Can't open display: :22 Note that XAUTHORITY is in the environment, and that this error is true whether xhost is allowing all hosts or not. The only way to get Xnest or Xephyr on my system to run is by passing the -ac flag, which turns off all access control, which is not really what a reasonable person would want. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing'), (700, 'unstable'), (600, 'stable'), (550, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.26-2-amd64 (SMP w/8 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages gdm depends on: ii adduser3.110 add and remove users and groups ii awesome [x-window-mana 3.3-1 highly configurable, next generati ii debconf [debconf-2.0] 1.5.26Debian configuration management sy ii dwm [x-window-manager] 5.5-1 dynamic window manager ii gksu 2.0.2-2+b1graphical frontend to su ii gnome-session [x-sessi 2.22.3-3 The GNOME 2 Session Manager ii gnome-terminal [x-term 2.26.2-1 The GNOME terminal emulator applic ii ion3 [x-window-manager 20090110-1tiling tabbed window manager desig ii kde-window-manager [x- 4:4.2.2-2 the KDE 4 window manager (KWin) ii konsole [x-terminal-em 4:4.2.2-1 X terminal emulator for KDE 4 ii larswm [x-window-manag 7.5.3-6 Lars Window Manager with tiled win ii libart-2.0-2 2.3.20-2 Library of functions for 2D graphi ii libatk1.0-01.26.0-1 The ATK accessibility toolkit ii libattr1 1:2.4.43-2Extended attribute shared library ii libc6 2.9-12GNU C Library: Shared libraries ii libcairo2 1.8.6-2+b1The Cairo 2D vector graphics libra ii libdbus-1-31.2.12-1 simple interprocess messaging syst ii libdbus-glib-1-2 0.80-4simple interprocess messaging syst ii libdmx11:1.0.2-3 X11 Distributed Multihead extensio ii libfontconfig1 2.6.0-3 generic font configuration library ii libfreetype6 2.3.9-4.1 FreeType 2 font engine, shared lib ii libglade2-01:2.6.4-1 library to load .glade files at ru ii libglib2.0-0 2.20.1-2 The GLib library of C routines ii libgnomecanvas2-0 2.26.0-1 A powerful object-oriented display ii libgtk2.0-02.16.1-2 The GTK+ graphical user interface ii libpam-modules 1.0.1-9 Pluggable Authentication Modules f ii libpam-runtime 1.0.1-9 Runtime support for the PAM librar ii libpam0g 1.0.1-9 Pluggable Authentication Modules l ii libpango1.0-0 1.24.0-3+b1 Layout and rendering of internatio ii librsvg2-2 2.22.3-2 SAX-based renderer library for SVG ii librsvg2-common2.22.3-2 SAX-based renderer library for SVG ii libselinux12.0.71-1 SELinux shared libraries ii libwrap0 7.6.q-16 Wietse Venema's TCP wrappers libra ii libx11-6 2:1.2.1-1 X11 client-side library ii libxau61:1.0.4-2 X11 authorisation library ii libxdmcp6 1:1.0.2-3 X11 Display Manager Control Protoc ii libxext6 2:1.0.4-1 X11 miscellaneous extension librar ii libxi6 2:1.1.4-1 X11 Input extension library ii libxinerama1 2:1.0.3-2 X11 Xinerama extension library ii libxml2
Bug#533165: FTBFS with current RPM
Package: dose2 Version: 1.4.1-1 Severity: serious -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 You package fails to build from source with RPM 4.7.0. This new version slightly changes API and moves to using standard C99 data types instead of own integer definitions. As Fedora 11 already ships rpm 4.7, you might be able to find fixes there. In case you have questions, feel free to ask me, I will try to help you. Build log is attached. - -- Michal Čihař | http://cihar.com | http://blog.cihar.com - -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.27.23-0.1-default (SMP w/2 CPU cores) Locale: LANG=cs_CZ.UTF-8, LC_CTYPE=cs_CZ.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) iEYEARECAAYFAko2HTYACgkQ3DVS6DbnVgT6kgCcCACRhwjoGXnlqdfAd6LflPDm ZYMAoKIhBozqrJsMPDk3MSgILxDgc+Ip =CYhT -END PGP SIGNATURE- dpkg-buildpackage: set CFLAGS to default value: -g -O2 dpkg-buildpackage: set CPPFLAGS to default value: dpkg-buildpackage: set LDFLAGS to default value: dpkg-buildpackage: set FFLAGS to default value: -g -O2 dpkg-buildpackage: set CXXFLAGS to default value: -g -O2 dpkg-buildpackage: source package dose2 dpkg-buildpackage: source version 1.4.1-1 dpkg-buildpackage: source changed by Ralf Treinen trei...@debian.org fakeroot debian/rules clean test -x debian/rules dh_clean /usr/bin/make -C . CFLAGS=-g -O2 -g -Wall -O2 CXXFLAGS=-g -O2 -g -Wall -O2 CPPFLAGS= LDFLAGS= -k clean make[1]: Entering directory `/tmp/rebuild/dose2-1.4.1' make[1]: *** No rule to make target `clean'. make[1]: Leaving directory `/tmp/rebuild/dose2-1.4.1' make: [makefile-clean] Error 2 (ignored) rm -f debian/stamp-makefile-build rm -f debian/*.doc-base.ocamldoc-apiref rm -f ocamlinit-stamp debian/libdose2-ocaml-dev.install debian/libdose2-ocaml.install rm -f debian/configure-stamp dpkg-source -b dose2-1.4.1 dpkg-source: info: using source format `1.0' dpkg-source: info: building dose2 using existing dose2_1.4.1.orig.tar.gz dpkg-source: info: building dose2 in dose2_1.4.1-1.diff.gz dpkg-source: info: building dose2 in dose2_1.4.1-1.dsc dpkg-genchanges -S ../dose2_1.4.1-1_source.changes dpkg-genchanges: including full source code in upload dpkg-buildpackage: source only upload (original source is included) W: /home/mcihar/.pbuilderrc does not exist I: using fakeroot in build. I: Current time: Mon Jun 15 12:03:10 CEST 2009 I: pbuilder-time-stamp: 1245060190 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/base.tgz] I: creating local configuration I: copying local configuration I: mounting /proc filesystem I: mounting /dev/pts filesystem I: policy-rc.d already exists I: Obtaining the cached apt archive contents I: Installing the build-deps - Attempting to satisfy build-dependencies - Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team pbuilder-ma...@lists.alioth.debian.org Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder and should Depends: cdbs, debhelper (= 7), dh-ocaml, ocaml-nox, camlp4, ocaml-findlib, menhir, librpm-dev, libpcre-ocaml-dev, libcalendar-ocaml-dev, libzip-ocaml-dev, libbz2-ocaml-dev dpkg-deb: building package `pbuilder-satisfydepends-dummy' in `/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Reading package lists... Building dependency tree... Reading state information... aptitude is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Selecting previously deselected package pbuilder-satisfydepends-dummy. (Reading database ... 9787 files and directories currently installed.) Unpacking pbuilder-satisfydepends-dummy (from .../pbuilder-satisfydepends-dummy.deb) ... dpkg: dependency problems prevent configuration of pbuilder-satisfydepends-dummy: pbuilder-satisfydepends-dummy depends on cdbs; however: Package cdbs is not installed. pbuilder-satisfydepends-dummy depends on debhelper (= 7); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on dh-ocaml; however: Package dh-ocaml is not installed. pbuilder-satisfydepends-dummy depends on ocaml-nox; however: Package ocaml-nox is not installed. pbuilder-satisfydepends-dummy depends on camlp4; however: Package camlp4 is not installed. pbuilder-satisfydepends-dummy depends on ocaml-findlib; however: Package ocaml-findlib is not installed. pbuilder-satisfydepends-dummy depends on menhir; however: Package menhir is not installed. pbuilder-satisfydepends-dummy depends on librpm-dev; however: Package librpm-dev is not installed. pbuilder-satisfydepends-dummy depends on libpcre-ocaml-dev; however: Package libpcre-ocaml-dev is not
Bug#532129: follow-up information
On Sat, 13 Jun 2009 21:34:02 +0200, Eric Chassande-Mottin wrote: [..] I have extracted a piece of the log file you asked for when wicd connects and reconnects. I have checked that the same thing happens every 10 seconds or so. Can you please provide the full log? here it is. There's not much information there really :( Could you please enable debug mode in the wicd GUI, and provide a debug-mode-on log? Thank you, and sorry for the inconvenience, David -- . ''`. Debian maintainer | http://wiki.debian.org/DavidPaleino : :' : Linuxer #334216 --|-- http://www.hanskalabs.net/ `. `'` GPG: 1392B174 | http://snipr.com/qa_page `- 2BAB C625 4E66 E7B8 450A C3E1 E6AA 9017 1392 B174 signature.asc Description: PGP signature
Bug#526489: Re: Bug#526489: Time to orphan eclipse? (Bug#526489: eclipse: should this package be orphaned?)
Hi *, can I be of any help? I don't think that I have the time to take over the entire packaging of Eclipse in Debian - at least not at the moment, but I can offer to help and advice anyone who would be willing to do this. I am building all those packages that you can download from eclipse.org/downloads and we are just a few days away from the next major release - Galileo. So, maybe not the best moment to 'orphan' Eclipse in Debian. Personally I think it would be great to have a newer version of Eclipse and its tools in Debian. Or did you contact one of the persons of the Linux Distro Project? Maybe they have some resources they can spend on that? Regards, Markus 2009/6/15 Andrew Vaughan ajv-li...@netspace.net.au Forwarded from -devel -- Forwarded Message -- Subject: Re: Bug#526489: Time to orphan eclipse? (Bug#526489: eclipse: should this package be orphaned?) Date: Mon, 15 Jun 2009 From: Ana Guerrero a...@debian.org To: Jerry Haltom was...@larvalstage.net, Michael Koch konque...@gmx.de, Matthias Klose d...@debian.org, Stephan Michels step...@apache.org On Wed, May 20, 2009 at 01:40:49AM +0200, Ana Guerrero wrote: I filed the quoted report almost 3 weeks ago. Resending to people listed as eclipse uploaders in case they did not get it. Third and last warning, I will orphan eclipse next saturday (20th June), so if somebody from the Java team is interested, please step up now. Usually, I would have orphaned the package already, but I was hoping from somebody from the team take over it. Sadly, I did not get a word from any of the uploaders (a i am not longer interested email would have been nice) or from somebody else from the team. For the record, even if the last version we have in Debian is 3.2.2, there was some work done (from one year ago) in the SVN for the version 3.4: http://svn.debian.org/wsvn/pkg-java/trunk/eclipse/debian/?op=logrev=0sc=0isdir=1 On Fri, May 01, 2009 at 04:33:20PM +0200, Ana Guerrero wrote: Package: eclipse Version: 3.2.2-6.1 Severity: important After being hit by #507536 (merged with #511713, #515747) and read http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=507536#104 I have been looking at the status of eclipse in Debian. Eclipse's packaging is under the umbrella of the Debian Java Maintainers, but it is currently lacking of a main maintainer. Latest maintainer upload was almost a year ago (8 May 2008), and the package has missed a few upstream releases (Current version is 3.4.2) since then. I am cc'ing all the people listed in the uploaders field, are you still interested in maintaining eclipse? Ana Original bug report at: http://bugs.debian.org/526489 -- To UNSUBSCRIBE, email to debian-devel-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org --- -- To UNSUBSCRIBE, email to debian-java-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#531515: [Pkg-ia32-libs-maintainers] Processed: Re: Bug#531515: ia32-apt-get: breaks dpkg --control (= 1.15.1) and debsums
Hi Goswin, Goswin von Brederlow schrieb am Fri, Jun 12, 2009 at 09:20:32PM +0200: thank you for starcing the problem. Too me it looks like debsums calls dpkg-deb in an undocumented (although not uncommon for tools in general) way: I don't think it's debsums. Debsums calls dpkg without --, see line 491 of debsums: 491 system 'dpkg', '--control', $deb, $control But it doesn't call dpkg-deb, but dpkg (which is ok) and dpkg adds this -- since 1.15.1. 4: /usr/bin/dpkg-deb --control -- /var/cache/apt/archives/bzip2_1.0.5-2_amd64.deb /tmp/gD4mFRK2gm/DEBIAN According to the manpage the syntax is: -e, --control archive [directory] There is no mention in the docs that dpkg-deb supports --. Then it's a bug that it's not documented anywhere else than in the dpkg 1.15.1 changelog entry: * When dpkg delegates to dpkg-query or dpkg-deb to do the actual work, add the -- marker to explicitely document the end of options so that arguments starting with a dash are not interpreted as options. Closes: #293163 Thanks to Bill Allombert for the patch. Your patch isn't correct though, at least not complete. Think of this invocation: dpkg-deb --control -- /var/cache/apt/archives/bzip2_1.0.5-2_amd64.deb There you are right. Missed that one. In that case, despite having 3 arguments, the DIR has to default to $(pwd)/DEBIAN. I guess there is no way around fully scanning the arguments and counting the valid bits. Looks so to me now, too. :-/ Regards, Axel -- /~\ Plain Text Ribbon Campaign | Axel Beckert \ / Say No to HTML in E-Mail and News| a...@deuxchevaux.org (Mail) X| a...@noone.org (Mail+Jabber) / \ I love long mails: http://email.is-not-s.ms/ | http://noone.org/abe/ (Web) -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#533168: nautilus: Highlight in tree view does not stay on folder being copied to
Package: nautilus Version: 2.26.2-5 Severity: normal -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.26-20090110 (PREEMPT) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages nautilus depends on: ii desktop-file-utils 0.15-2 Utilities for .desktop files ii gvfs1.2.2-2 userspace virtual filesystem - ser ii libatk1.0-0 1.26.0-1 The ATK accessibility toolkit ii libbeagle1 0.3.9-1 library for accessing beagle using ii libc6 2.9-12 GNU C Library: Shared libraries ii libcairo2 1.8.6-2+b1 The Cairo 2D vector graphics libra ii libdbus-glib-1-20.80-4 simple interprocess messaging syst ii libexempi3 2.1.0-3 library to parse XMP metadata (Lib ii libexif12 0.6.17-1 library to parse EXIF files ii libgail18 2.16.1-2 GNOME Accessibility Implementation ii libgconf2-4 2.26.2-1 GNOME configuration database syste ii libglib2.0-02.20.1-2 The GLib library of C routines ii libgnome-desktop-2-11 2.26.1-1 Utility library for loading .deskt ii libgtk2.0-0 2.16.1-2 The GTK+ graphical user interface ii libice6 2:1.0.5-1X11 Inter-Client Exchange library ii libnautilus-extension1 2.26.2-5 libraries for nautilus components ii libpango1.0-0 1.24.0-3+b1 Layout and rendering of internatio ii libselinux1 2.0.71-1 SELinux shared libraries ii libsm6 2:1.1.0-2X11 Session Management library ii libtrackerclient0 0.6.95-1 metadata database, indexer and sea ii libunique-1.0-0 1.0.8-1 Library for writing single instanc ii libx11-62:1.2.1-1X11 client-side library ii libxml2 2.7.3.dfsg-1 GNOME XML library ii libxrender1 1:0.9.4-2X Rendering Extension client libra ii nautilus-data 2.26.2-5 data files for nautilus ii shared-mime-info0.60-2 FreeDesktop.org shared MIME databa Versions of packages nautilus recommends: ii app-install-dat 2008.11.27 Application Installer Data Files ii consolekit 0.3.0-2 framework for defining and trackin ii desktop-base5.0.5common files for the Debian Deskto ii eject 2.1.5+deb1+cvs20081104-6 ejects CDs and operates CD-Changer ii gnome-mount 0.8-2wrapper for (un)mounting and eject ii gvfs-backends 1.2.2-2 userspace virtual filesystem - bac ii librsvg2-common 2.22.3-2 SAX-based renderer library for SVG ii nautilus-cd-bur 2.24.0-3 CD Burning front-end for Nautilus pn synapticnone (no description available) Versions of packages nautilus suggests: pn eog none (no description available) ii evince [pdf-viewer] 2.26.1-2 Document (postscript, pdf) viewer pn tracker none (no description available) ii vlc [mp3-decoder] 0.9.9a-3 multimedia player and streamer ii vlc-nox [mp3-decoder] 0.9.9a-3 multimedia player and streamer (wi pn xdg-user-dirs none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#525893: wicd: claims to be connected to wired network when actually on wireless
Hello Zack, On Mon, 27 Apr 2009 11:00:26 -0700, Zack Weinberg wrote: Package: wicd Version: 1.5.9-5 Severity: normal Recently, wicd has started claiming that the active network is wired, even when it isn't. It's very obvious - you pick a wireless network, and it goes through the entire connection sequence correctly, and then it says ok! I'm connected to the wired network. All the user interfaces are consistent in this error. Would you please test the package from experimental? I didn't see this behaviour with 1.5.9-5, and am not seeing it in 1.6.0-2~pre1. Maybe something's wrong in your setup? Before asking more, please try out the new package. It might be an already-fixed bug :) David -- . ''`. Debian maintainer | http://wiki.debian.org/DavidPaleino : :' : Linuxer #334216 --|-- http://www.hanskalabs.net/ `. `'` GPG: 1392B174 | http://snipr.com/qa_page `- 2BAB C625 4E66 E7B8 450A C3E1 E6AA 9017 1392 B174 signature.asc Description: PGP signature
