Bug#435224: linux-image-2.6.22-1-k7: I/O errors when plugging external hd via Firewire 400
Package: linux-image-2.6.22-1-k7 Version: 2.6.22-3 Severity: normal When I plug a Western Digital 500GB MyBook external HD through the Firewire 400 interface, the following errors appear on the syslog: Jul 30 03:18:31 monk kernel: firewire_sbp2: management write failed, rcode 0x13 Jul 30 03:18:31 monk kernel: firewire_sbp2: removed sbp2 unit fw1.1 Jul 30 03:18:43 monk kernel: scsi3 : SBP-2 IEEE-1394 Jul 30 03:18:43 monk kernel: firewire_core: created new fw device fw1 (0 config rom retries) Jul 30 03:18:43 monk kernel: firewire_sbp2: logged in to sbp2 unit fw1.1 (0 retries) Jul 30 03:18:43 monk kernel: firewire_sbp2: - management_agent_address: 0xf003 Jul 30 03:18:43 monk kernel: firewire_sbp2: - command_block_agent_address: 0xf010 Jul 30 03:18:43 monk kernel: firewire_sbp2: - status write address: 0x0001 Jul 30 03:18:49 monk kernel: firewire_sbp2: sbp2_scsi_abort Jul 30 03:18:54 monk kernel: scsi 3:0:0:0: Direct-Access WD 5000AAKS Externa 107a PQ: 0 ANSI: 4 Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Write Protect is off Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Mode Sense: 11 00 00 00 Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Cache data unavailable Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Assuming drive cache: write through Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Write Protect is off Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Mode Sense: 11 00 00 00 Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Cache data unavailable Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Assuming drive cache: write through Jul 30 03:18:54 monk kernel: sdb: sdb1 sdb2 Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Attached SCSI disk Jul 30 03:18:54 monk kernel: firewire_core: phy config: card 0, new root=ffc0, gap_count=63 Jul 30 03:18:54 monk kernel: firewire_sbp2: management write failed, rcode 0x12 Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Result: hostbyte=DID_BUS_BUSY driverbyte=DRIVER_OK,SUGGEST_OK Jul 30 03:18:54 monk kernel: end_request: I/O error, dev sdb, sector 976772992 Jul 30 03:18:54 monk kernel: printk: 36 messages suppressed. Jul 30 03:18:54 monk kernel: Buffer I/O error on device sdb, logical block 122096624 Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Result: hostbyte=DID_BUS_BUSY driverbyte=DRIVER_OK,SUGGEST_OK Jul 30 03:18:54 monk kernel: end_request: I/O error, dev sdb, sector 976772992 Jul 30 03:18:54 monk kernel: Buffer I/O error on device sdb, logical block 122096624 Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Result: hostbyte=DID_BUS_BUSY driverbyte=DRIVER_OK,SUGGEST_OK Jul 30 03:18:54 monk kernel: end_request: I/O error, dev sdb, sector 976772992 Jul 30 03:18:54 monk kernel: Buffer I/O error on device sdb, logical block 122096624 Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Result: hostbyte=DID_BUS_BUSY driverbyte=DRIVER_OK,SUGGEST_OK Jul 30 03:18:54 monk kernel: end_request: I/O error, dev sdb, sector 0 Jul 30 03:18:54 monk kernel: Buffer I/O error on device sdb, logical block 0 Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Result: hostbyte=DID_BUS_BUSY driverbyte=DRIVER_OK,SUGGEST_OK Jul 30 03:18:54 monk kernel: end_request: I/O error, dev sdb, sector 0 Jul 30 03:18:54 monk kernel: Buffer I/O error on device sdb, logical block 0 Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Result: hostbyte=DID_BUS_BUSY driverbyte=DRIVER_OK,SUGGEST_OK Jul 30 03:18:54 monk kernel: end_request: I/O error, dev sdb, sector 0 Jul 30 03:18:54 monk kernel: Buffer I/O error on device sdb, logical block 0 Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Result: hostbyte=DID_BUS_BUSY driverbyte=DRIVER_OK,SUGGEST_OK Jul 30 03:18:54 monk kernel: end_request: I/O error, dev sdb, sector 976773160 Jul 30 03:18:54 monk kernel: Buffer I/O error on device sdb, logical block 122096645 Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Result: hostbyte=DID_BUS_BUSY driverbyte=DRIVER_OK,SUGGEST_OK Jul 30 03:18:54 monk kernel: end_request: I/O error, dev sdb, sector 976773160 Jul 30 03:18:54 monk kernel: Buffer I/O error on device sdb, logical block 122096645 Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Result: hostbyte=DID_BUS_BUSY driverbyte=DRIVER_OK,SUGGEST_OK Jul 30 03:18:54 monk kernel: end_request: I/O error, dev sdb, sector 976773160 Jul 30 03:18:54 monk kernel: Buffer I/O error on device sdb, logical block 122096645 Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Result: hostbyte=DID_BUS_BUSY driverbyte=DRIVER_OK,SUGGEST_OK Jul 30 03:18:54 monk kernel: end_request: I/O error, dev sdb, sector 976773160 Jul 30 03:18:54 monk kernel: Buffer I/O error on device sdb, logical block 122096645 Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Result: hostbyte=DID_BUS_BUSY driverbyte=DRIVER_OK,SUGGEST_OK Jul 30 03:18:54 monk kernel:
Bug#392915: marked as done (xserver-xorg-video-ati: xserver freezes system when starting)
Your message dated Mon, 30 Jul 2007 08:50:48 +0200 with message-id [EMAIL PROTECTED] and subject line Is this fixed in 2.6.22? has caused the attached Bug report to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what I am talking about this indicates a serious mail system misconfiguration somewhere. Please contact me immediately.) Debian bug tracking system administrator (administrator, Debian Bugs database) ---BeginMessage--- Package: xserver-xorg-video-ati Version: 1:6.6.3-1 Severity: grave When starting xserver, screen is blank (black) and the systems is frozen (SysRq not working). 'vesa' drivers works but is really slow... 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R200 QL [Radeon 8500 LE] Here is my xorg.conf: (xorg log follows) ---8---8---8---8---8---8---8 # /etc/X11/xorg.conf (xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the /etc/X11/xorg.conf manual page. # (Type man /etc/X11/xorg.conf at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section Files FontPath/usr/share/fonts/X11/misc FontPath/usr/X11R6/lib/X11/fonts/misc FontPath/usr/share/fonts/X11/cyrillic FontPath/usr/X11R6/lib/X11/fonts/cyrillic FontPath/usr/share/fonts/X11/100dpi/:unscaled FontPath/usr/X11R6/lib/X11/fonts/100dpi/:unscaled FontPath/usr/share/fonts/X11/75dpi/:unscaled FontPath/usr/X11R6/lib/X11/fonts/75dpi/:unscaled FontPath/usr/share/fonts/X11/Type1 FontPath/usr/X11R6/lib/X11/fonts/Type1 FontPath/usr/share/fonts/X11/100dpi FontPath/usr/X11R6/lib/X11/fonts/100dpi FontPath/usr/share/fonts/X11/75dpi FontPath/usr/X11R6/lib/X11/fonts/75dpi # path to defoma fonts FontPath/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType EndSection Section Module Loadi2c Loadbitmap Loadddc Loaddri Loadextmod Loadfreetype Loadglx Loadint10 Loadtype1 Loadvbe EndSection Section InputDevice Identifier Generic Keyboard Driver kbd Option CoreKeyboard Option XkbRules xorg Option XkbModel pc105 Option XkbLayout fr Option XkbVariantlatin9 EndSection Section InputDevice Identifier Configured Mouse Driver mouse Option CorePointer Option Device/dev/input/mice Option Protocol ExplorerPS/2 Option Emulate3Buttons true EndSection Section Device Identifier Generic Video Card Driver radeon # BusID PCI:1:0:0 EndSection Section Monitor Identifier SyncMaster Option DPMS EndSection Section Screen Identifier Default Screen Device Generic Video Card Monitor SyncMaster DefaultDepth24 SubSection Display Depth 1 Modes 1280x1024 1152x864 1024x768 832x624 800x600 720x400 640x480 EndSubSection SubSection Display Depth 4 Modes 1280x1024 1152x864 1024x768 832x624 800x600 720x400 640x480 EndSubSection SubSection Display Depth 8 Modes 1280x1024 1152x864 1024x768 832x624 800x600 720x400 640x480 EndSubSection SubSection Display Depth 15 Modes 1280x1024 1152x864 1024x768 832x624 800x600 720x400 640x480 EndSubSection SubSection Display Depth 16 Modes 1280x1024 1152x864 1024x768 832x624 800x600 720x400 640x480 EndSubSection SubSection Display Depth 24 Modes 1280x1024 1152x864 1024x768 832x624 800x600 720x400 640x480 EndSubSection EndSection Section ServerLayout Identifier Default Layout Screen Default
Bug#394450: marked as done (xserver-xorg: new install , Radeon 9200 dual head : default conf hangs ; solution)
Your message dated Mon, 30 Jul 2007 08:50:48 +0200 with message-id [EMAIL PROTECTED] and subject line Is this fixed in 2.6.22? has caused the attached Bug report to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what I am talking about this indicates a serious mail system misconfiguration somewhere. Please contact me immediately.) Debian bug tracking system administrator (administrator, Debian Bugs database) ---BeginMessage--- Package: xserver-xorg Version: 1:7.0.22 Severity: important I did a test install of Debian/etch/amd64 ; I have a Radeon card, with two heads (one digital , one analog ) , and two CRT monitors connected to it (using good-old analog cables , and one digital-analog adapter ) lspci reports: 01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200] (rev 01) 01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200] (Secondary) (rev 01) After the install, when I reboot, the reboot would hang when GDM tried to start X , (nothing shown on the two monitors, kbd unresponsive ), and I had to hit reset . I attach the configuration that was causing the problem I then changed that config , imitating the XFree config that was working with Sarge; see 2nd attachemt. If I start X using /usr/bin/X11/X +xinerama -layout xinerama_layout everything works fine. a. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing') Architecture: amd64 (x86_64) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-2-amd64 Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8) Versions of packages xserver-xorg depends on: ii debconf 1.5.6Debian configuration management sy ii x11-common 1:7.1.0-5X Window System (X.Org) infrastruc ii xbase-clients 1:7.1.ds-3 miscellaneous X clients ii xkb-data0.9-3X Keyboard Extension (XKB) configu ii xserver-xorg-core 2:1.1.1-10 X.Org X server -- core server ii xserver-xorg-input-all 1:7.1.0-5the X.Org X server -- input driver ii xserver-xorg-input-evde 1:1.1.2-3X.Org X server -- evdev input driv ii xserver-xorg-input-kbd 1:1.1.0-4X.Org X server -- keyboard input d ii xserver-xorg-input-mous 1:1.1.1-3X.Org X server -- mouse input driv ii xserver-xorg-video-all 1:7.1.0-5the X.Org X server -- output drive ii xserver-xorg-video-apm 1:1.1.1-3X.Org X server -- APM display driv ii xserver-xorg-video-ark 1:0.6.0-3X.Org X server -- ark display driv ii xserver-xorg-video-ati 1:6.6.3-2X.Org X server -- ATI display driv ii xserver-xorg-video-chip 1:1.1.1-4X.Org X server -- Chips display dr ii xserver-xorg-video-cirr 1:1.1.0-3X.Org X server -- Cirrus display d ii xserver-xorg-video-cyri 1:1.1.0-4X.Org X server -- Cyrix display dr ii xserver-xorg-video-dumm 1:0.2.0-3X.Org X server -- dummy display dr ii xserver-xorg-video-fbde 1:0.3.0-3X.Org X server -- fbdev display dr ii xserver-xorg-video-glin 1:1.1.1-3X.Org X server -- Glint display dr ii xserver-xorg-video-i128 1:1.2.0-3X.Org X server -- i128 display dri ii xserver-xorg-video-i810 2:1.7.2-1X.Org X server -- Intel i8xx, i9xx ii xserver-xorg-video-mga 1:1.4.2.dfsg.1-1 X.Org X server -- MGA display driv ii xserver-xorg-video-neom 1:1.1.1-4X.Org X server -- Neomagic display ii xserver-xorg-video-nv [ 1:1.2.0-3X.Org X server -- NV display drive ii xserver-xorg-video-rend 1:4.1.0.dfsg.1-4 X.Org X server -- Rendition displa ii xserver-xorg-video-s3 [ 1:0.4.1-4X.Org X server -- legacy S3 displa ii xserver-xorg-video-s3vi 1:1.9.1-3X.Org X server -- S3 ViRGE display ii xserver-xorg-video-sava 1:2.1.2-1X.Org X server -- Savage display d ii xserver-xorg-video-sili 1:1.4.1-4X.Org X server -- SiliconMotion di ii xserver-xorg-video-sis 1:0.9.1-4X.Org X server -- SiS display driv ii xserver-xorg-video-sisu 1:0.8.1-3X.Org X server -- SiS USB display ii xserver-xorg-video-tdfx 1:1.2.1-5X.Org X server -- tdfx display dri ii xserver-xorg-video-tga 1:1.1.0-3X.Org X server -- TGA display driv ii xserver-xorg-video-trid 1:1.2.1-3X.Org X server -- Trident display ii xserver-xorg-video-tsen 1:1.1.0-3X.Org X server -- Tseng display dr ii xserver-xorg-video-v4l 0.1.1-3 X.Org X server -- Video 4 Linux di ii xserver-xorg-video-vesa 1:1.2.1-3X.Org X server -- VESA display dri ii xserver-xorg-video-vga 1:4.1.0-3X.Org X server -- VGA display driv ii xserver-xorg-video-via 1:0.2.1-5X.Org X server -- VIA display driv ii
Bug#435226: linux-image-2.6.22-1-powerpc nvidia frame buffer and ams problems
Package: linux-image-2.6.22-1-powerpc Version: 2.6.22-3 Severity: normal *** Please type your report below this line *** Since linux-image-2.6.22-1-powerpc_2.6.22-1_powerpc.deb was out I decided to give it a try in my 12 powerbook. I have tried versions 2.6.22-1, 2.6.22-2 and 2.6.22-3. It all seems to work ok except for: 1) the framebuffer 'resolution' detection, I mean that in the booting process I get taller letters (deformed, they are stretched, also happens the same with the penguin logo) and the prompt is lost somewhere down under the screen. I can solve this by blindly typing: fbset 1024x768-60, but this didn't happen with kernels up to (and included) 2.6.21. I have tried several possible combinations in yaboot.conf: - append=video=nv:1024x768-60 ... - append=video=rivafb:1024x768-60 ... without luck. Being video=ofonly the only one that gives a 'correct' frame buffer, but I lose the ability to dim the screen backlight. 2) it seems there's no ams (apple motion sensor) module built, it would be nice to have it. -- Package-specific info: ** Version: Linux version 2.6.22-1-powerpc (Debian 2.6.22-3) ([EMAIL PROTECTED]) (gcc version 4.1.3 20070718 (prerelease) (Debian 4.1.2-14)) #1 Sun Jul 29 13:58:06 CEST 2007 ** Not tainted ** Kernel log: bcm43xx: Core 4: ID 0x804, rev 0x9, vendor 0x4243 bcm43xx: PHY connected bcm43xx: Detected PHY: Analog: 2, Type 2, Revision 2 bcm43xx: Detected Radio: ID: 2205017f (Manuf: 17f Ver: 2050 Rev: 2) bcm43xx: Radio turned off bcm43xx: Radio turned off input: appletouch as /class/input/input8 usbcore: registered new interface driver appletouch sd 0:0:0:0: [sda] Attached SCSI removable disk sd 0:0:0:1: [sdb] Attached SCSI removable disk sd 0:0:0:2: [sdc] Attached SCSI removable disk sd 0:0:0:3: [sdd] Attached SCSI removable disk snd-aoa-fabric-layout: found bus with layout 72 snd-aoa-fabric-layout: Using PMF GPIOs snd-aoa-codec-tas: found tas3004 snd-aoa-fabric-layout: can use this codec snd-aoa-codec-tas: tas found, addr 0x35 on /[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED]/[EMAIL PROTECTED] Adding 2441396k swap on /dev/hda6. Priority:-1 extents:1 across:2441396k EXT3 FS on hda3, internal journal loop: module loaded adt746x: version 1 (supported) adt746x: Thermostat bus: 1, address: 0x2e, limit_adjust: 0, fan_speed: -1 sensor 0: HDD BOTTOMSIDE sensor 1: CPU TOPSIDE sensor 2: GPU ON DIE adt746x: ADT7467 initializing adt746x: Lowering max temperatures from 73, 80, 109 to 70, 50, 70 fuse init (API version 7.8) kjournald starting. Commit interval 5 seconds EXT3 FS on hda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda4, internal journal EXT3-fs: mounted filesystem with ordered data mode. snd-powermac no longer handles any machines with a layout-id property in the device-tree, use snd-aoa. NET: Registered protocol family 15 NET: Registered protocol family 10 lo: Disabled Privacy Extensions lp: driver loaded but no devices found Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -62 Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 usb 1-1: USB disconnect, address 2 bcm43xx: PHY connected usb 1-1: new full speed USB device using ohci_hcd and address 4 bcm43xx: Microcode rev 0x122, pl 0x99 (2005-01-22 22:40:08) bcm43xx: Radio turned on bcm43xx: Radio enabled by hardware bcm43xx: Chip initialized bcm43xx: 30-bit DMA initialized bcm43xx: Keys cleared bcm43xx: Selected 802.11 core (phytype 2) ADDRCONF(NETDEV_UP): eth2: link is not ready usb 1-1: configuration #1 chosen from 1 choice bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 ADDRCONF(NETDEV_UP): eth1: link is not ready SoftMAC: Open Authentication completed with 00:40:10:10:00:03 ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready Bluetooth: HCI USB driver ver 2.9 usbcore: registered new interface driver hci_usb hda: Enabling Ultra DMA 5 eth2: no IPv6 routers present ondemand governor failed to load due to too long transition latency bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0 bcm43xx: Radio turned off bcm43xx: DMA-32 0x0200 (RX) max used slots: 1/64 bcm43xx: DMA-32 0x02A0 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0280 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0260 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0240 (TX) max used slots: 0/512 bcm43xx: DMA-32 0x0220 (TX) max used
Bug#435227: linux-image-2.6.22-1-686: yaird error: unrecognised line in /proc/bus/input/devices: U: Uniq= (fatal)
Package: linux-image-2.6.22-1-686 Version: 2.6.22-3 Severity: normal This error from subject appear while upgrading from 2.6.22-2 to 2.6.22-3 and never seen before. As result, initrd does not generated. It is occur on ones machines, but there are no such errors on others. I can't guess, what is differ. If you think this is yaird bug, please forward this report there. But if so, why it does not occur before? -- Package-specific info: ** Version: Linux version 2.6.22-1-686 (Debian 2.6.22-2) ([EMAIL PROTECTED]) (gcc version 4.1.3 20070718 (prerelease) (Debian 4.1.2-14)) #1 SMP Mon Jul 23 13:23:02 UTC 2007 ** Tainted: PFSRMB ** Kernel log: lo: Disabled Privacy Extensions eth0: no IPv6 routers present ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (4031 buckets, 32248 max) NET: Registered protocol family 4 pnp: Device 00:0a disabled. vmmon: module license 'unspecified' taints kernel. /dev/vmmon[4376]: VMCI: Driver initialized. /dev/vmmon[4376]: Module vmmon: registered with major=10 minor=165 /dev/vmmon[4376]: Module vmmon: initialized /dev/vmmon[4381]: Module vmmon: unloaded /dev/vmmon[4690]: VMCI: Driver initialized. /dev/vmmon[4690]: Module vmmon: registered with major=10 minor=165 /dev/vmmon[4690]: Module vmmon: initialized pnp: Device 00:0a activated. parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] /dev/vmnet: open called by PID 4718 (vmnet-bridge) /dev/vmnet: hub 0 does not exist, allocating memory. /dev/vmnet: port on hub 0 successfully opened bridge-eth0: enabling the bridge bridge-eth0: up bridge-eth0: already up bridge-eth0: attached /dev/vmmon[4734]: Module vmmon: unloaded pnp: Device 00:0a disabled. bridge-eth0: down bridge-eth0: detached pnp: Device 00:0a activated. parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] pnp: Device 00:0a disabled. /dev/vmmon[2377]: VMCI: Driver initialized. /dev/vmmon[2377]: Module vmmon: registered with major=10 minor=165 /dev/vmmon[2377]: Module vmmon: initialized /dev/vmmon[2382]: Module vmmon: unloaded /dev/vmmon[2743]: VMCI: Driver initialized. /dev/vmmon[2743]: Module vmmon: registered with major=10 minor=165 /dev/vmmon[2743]: Module vmmon: initialized pnp: Device 00:0a activated. parport_pc 00:0a: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] /dev/vmnet: open called by PID 2775 (vmnet-bridge) /dev/vmnet: hub 0 does not exist, allocating memory. /dev/vmnet: port on hub 0 successfully opened bridge-eth0: enabling the bridge bridge-eth0: up bridge-eth0: already up bridge-eth0: attached /dev/vmnet: open called by PID 2795 (vmware-vmx) device eth0 entered promiscuous mode audit(1185451241.617:2): dev=eth0 prom=256 old_prom=0 auid=4294967295 bridge-eth0: enabled promiscuous mode /dev/vmnet: port on hub 0 successfully opened /dev/vmmon[2804]: host clock rate change request 0 - 19 /dev/vmmon[2804]: host clock rate change request 19 - 27 /dev/vmmon[2804]: host clock rate change request 27 - 100 device eth0 left promiscuous mode audit(1185452515.600:3): dev=eth0 prom=0 old_prom=256 auid=4294967295 bridge-eth0: disabled promiscuous mode /dev/vmmon[2795]: host clock rate change request 100 - 0 vmmon: Had to deallocate locked 69190 pages from vm driver ce986000 vmmon: Had to deallocate AWE 2953 pages from vm driver ce986000 /dev/vmnet: open called by PID 3761 (vmware-vmx) device eth0 entered promiscuous mode audit(1185452735.097:4): dev=eth0 prom=256 old_prom=0 auid=4294967295 bridge-eth0: enabled promiscuous mode /dev/vmnet: port on hub 0 successfully opened /dev/vmmon[3779]: host clock rate change request 0 - 19 /dev/vmmon[3779]: host clock rate change request 19 - 27 /dev/vmmon[3779]: host clock rate change request 27 - 100 device eth0 left promiscuous mode audit(1185453903.582:5): dev=eth0 prom=0 old_prom=256 auid=4294967295 bridge-eth0: disabled promiscuous mode /dev/vmmon[3761]: host clock rate change request 100 - 0 vmmon: Had to deallocate locked 69188 pages from vm driver cfc0c000 vmmon: Had to deallocate AWE 2168 pages from vm driver cfc0c000 /dev/vmnet: open called by PID 4566 (vmware-vmx) device eth0 entered promiscuous mode audit(1185453972.581:6): dev=eth0 prom=256 old_prom=0 auid=4294967295 bridge-eth0: enabled promiscuous mode /dev/vmnet: port on hub 0 successfully opened /dev/vmmon[4573]: host clock rate change request 0 - 19 /dev/vmmon[4573]: host clock rate change request 19 - 27 /dev/vmmon[4573]: host clock rate change request 27 - 100 device eth0 left promiscuous mode audit(1185454539.073:7): dev=eth0 prom=0 old_prom=256 auid=4294967295 bridge-eth0: disabled promiscuous mode /dev/vmmon[4566]: host clock rate change request 100 - 0 vmmon: Had to deallocate locked 69188 pages from vm driver cfc0c000 vmmon: Had to deallocate AWE 3030 pages from vm driver cfc0c000 CIFS: Unknown mount option codepage CIFS VFS: Send error in SessSetup = -13 CIFS VFS:
Bug#435226: linux-image-2.6.22-1-powerpc nvidia frame buffer and ams problems
On Mon, Jul 30, 2007 at 09:08:14AM +0200, Antonio-M. Corbi Bellot wrote: 1) the framebuffer 'resolution' detection, I mean that in the booting process I get taller letters (deformed, they are stretched, also happens the same with the penguin logo) and the prompt is lost somewhere down under the screen. I can solve this by blindly typing: fbset 1024x768-60, but this didn't happen with kernels up to (and included) 2.6.21. I have tried several possible combinations in yaboot.conf: - append=video=nv:1024x768-60 ... - append=video=rivafb:1024x768-60 ... without luck. could you please report that bug upstream on bugzilla.kernel.org against the fb subsys. it might be interesting which kernel was the last one working. please feedback on the bugzilla bug nr. 2) it seems there's no ams (apple motion sensor) module built, it would be nice to have it. yo indeed, checkout latest trunk for it see apt lines - http://wiki.debian.org/DebianKernel thanks + regards -- maks -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processed: Re: Bug#435227: linux-image-2.6.22-1-686: yaird error: unrecognised line in /proc/bus/input/devices: U: Uniq= (fatal)
Processing commands for [EMAIL PROTECTED]: reassign 435227 yaird Bug#435227: linux-image-2.6.22-1-686: yaird error: unrecognised line in /proc/bus/input/devices: U: Uniq= (fatal) Bug reassigned from package `linux-image-2.6.22-1-686' to `yaird'. severity 435227 critical Bug#435227: linux-image-2.6.22-1-686: yaird error: unrecognised line in /proc/bus/input/devices: U: Uniq= (fatal) Severity set to `critical' from `normal' stop Stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#435227: linux-image-2.6.22-1-686: yaird error: unrecognised line in /proc/bus/input/devices: U: Uniq= (fatal)
reassign 435227 yaird severity 435227 critical stop On Mon, Jul 30, 2007 at 11:44:24AM +0400, Vladimir Stavrinov wrote: This error from subject appear while upgrading from 2.6.22-2 to 2.6.22-3 and never seen before. As result, initrd does not generated. It is occur on ones machines, but there are no such errors on others. I can't guess, what is differ. If you think this is yaird bug, please forward this report there. But if so, why it does not occur before? don't use yaird, it's plain and simple like that. regards -- maks -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#435224: linux-image-2.6.22-1-k7: I/O errors when plugging external hd via Firewire 400
On Mon, Jul 30, 2007 at 03:29:37AM -0300, Paulo Marcel Coelho Aragão wrote: When I plug a Western Digital 500GB MyBook external HD through the Firewire 400 interface, the following errors appear on the syslog: Jul 30 03:18:31 monk kernel: firewire_sbp2: management write failed, rcode 0x13 Jul 30 03:18:31 monk kernel: firewire_sbp2: removed sbp2 unit fw1.1 Jul 30 03:18:43 monk kernel: scsi3 : SBP-2 IEEE-1394 Jul 30 03:18:43 monk kernel: firewire_core: created new fw device fw1 (0 config rom retries) Jul 30 03:18:43 monk kernel: firewire_sbp2: logged in to sbp2 unit fw1.1 (0 retries) Jul 30 03:18:43 monk kernel: firewire_sbp2: - management_agent_address: 0xf003 Jul 30 03:18:43 monk kernel: firewire_sbp2: - command_block_agent_address: 0xf010 Jul 30 03:18:43 monk kernel: firewire_sbp2: - status write address: 0x0001 Jul 30 03:18:49 monk kernel: firewire_sbp2: sbp2_scsi_abort Jul 30 03:18:54 monk kernel: scsi 3:0:0:0: Direct-Access WD 5000AAKS Externa 107a PQ: 0 ANSI: 4 Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Write Protect is off Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Mode Sense: 11 00 00 00 Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Cache data unavailable Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Assuming drive cache: write through Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Write Protect is off Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Mode Sense: 11 00 00 00 Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Cache data unavailable Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Assuming drive cache: write through Jul 30 03:18:54 monk kernel: sdb: sdb1 sdb2 Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Attached SCSI disk Jul 30 03:18:54 monk kernel: firewire_core: phy config: card 0, new root=ffc0, gap_count=63 Jul 30 03:18:54 monk kernel: firewire_sbp2: management write failed, rcode 0x12 Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Result: hostbyte=DID_BUS_BUSY driverbyte=DRIVER_OK,SUGGEST_OK Jul 30 03:18:54 monk kernel: end_request: I/O error, dev sdb, sector 976772992 Jul 30 03:18:54 monk kernel: printk: 36 messages suppressed. Jul 30 03:18:54 monk kernel: Buffer I/O error on device sdb, logical block 122096624 Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Result: hostbyte=DID_BUS_BUSY driverbyte=DRIVER_OK,SUGGEST_OK Jul 30 03:18:54 monk kernel: end_request: I/O error, dev sdb, sector 976772992 Jul 30 03:18:54 monk kernel: Buffer I/O error on device sdb, logical block 122096624 Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Result: hostbyte=DID_BUS_BUSY driverbyte=DRIVER_OK,SUGGEST_OK Jul 30 03:18:54 monk kernel: end_request: I/O error, dev sdb, sector 976772992 Jul 30 03:18:54 monk kernel: Buffer I/O error on device sdb, logical block 122096624 Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Result: hostbyte=DID_BUS_BUSY driverbyte=DRIVER_OK,SUGGEST_OK Jul 30 03:18:54 monk kernel: end_request: I/O error, dev sdb, sector 0 Jul 30 03:18:54 monk kernel: Buffer I/O error on device sdb, logical block 0 Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Result: hostbyte=DID_BUS_BUSY driverbyte=DRIVER_OK,SUGGEST_OK Jul 30 03:18:54 monk kernel: end_request: I/O error, dev sdb, sector 0 Jul 30 03:18:54 monk kernel: Buffer I/O error on device sdb, logical block 0 Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Result: hostbyte=DID_BUS_BUSY driverbyte=DRIVER_OK,SUGGEST_OK Jul 30 03:18:54 monk kernel: end_request: I/O error, dev sdb, sector 0 Jul 30 03:18:54 monk kernel: Buffer I/O error on device sdb, logical block 0 Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Result: hostbyte=DID_BUS_BUSY driverbyte=DRIVER_OK,SUGGEST_OK Jul 30 03:18:54 monk kernel: end_request: I/O error, dev sdb, sector 976773160 Jul 30 03:18:54 monk kernel: Buffer I/O error on device sdb, logical block 122096645 Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Result: hostbyte=DID_BUS_BUSY driverbyte=DRIVER_OK,SUGGEST_OK Jul 30 03:18:54 monk kernel: end_request: I/O error, dev sdb, sector 976773160 Jul 30 03:18:54 monk kernel: Buffer I/O error on device sdb, logical block 122096645 Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Result: hostbyte=DID_BUS_BUSY driverbyte=DRIVER_OK,SUGGEST_OK Jul 30 03:18:54 monk kernel: end_request: I/O error, dev sdb, sector 976773160 Jul 30 03:18:54 monk kernel: Buffer I/O error on device sdb, logical block 122096645 Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb] Result: hostbyte=DID_BUS_BUSY driverbyte=DRIVER_OK,SUGGEST_OK Jul 30 03:18:54 monk kernel: end_request: I/O error, dev sdb, sector 976773160 Jul 30 03:18:54 monk kernel: Buffer I/O error on device sdb, logical block 122096645 Jul 30 03:18:54 monk kernel: sd 3:0:0:0: [sdb]
Bug#433307: linux-image-2.6-k7: results of git bisect
On Mon, Jul 30, 2007 at 01:58:20AM +0300, Avi Rozen wrote: I've followed through with a git bisect, and homed in on the following commit (before 2.6.19): a99c19492a801013fd25ce7bab1f0f65a328a4ba is first bad commit commit a99c19492a801013fd25ce7bab1f0f65a328a4ba Author: Jamie Painter [EMAIL PROTECTED] Date: Thu Jul 27 14:17:28 2006 -0400 USB: usbnet - Add unlink_rx_urbs() call to allow for Jumbo Frames Add usbnet_unlink_rx_urbs() which can be called by mini-drivers when they change their MTU such as for Jumbo Frame support. Signed-off-by: David Hollis [EMAIL PROTECTED] Signed-off-by: Greg Kroah-Hartman [EMAIL PROTECTED] :04 04 4248c6b610ebe61233e08bf6e2051c733c69245d 28b8a35b3b280711e12183a17a312c4db17c7002 M drivers So it looks like a problem with the usb ethernet connection to the cable modem. I've posted a query on the linux-usb-users mailing list, but got no replies so far. I'd appreciate any feedback on this. cool. did you check if 2.6.22 works? there are images in unstable, that would be great. also an entry in bugzilla.org seems a good step so that upstream doesn't forget aboves bug, please forward the bugzilla bug nr. thanks + regards -- maks -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#435226: linux-image-2.6.22-1-powerpc nvidia frame buffer and ams problems
Hi Max and thanks for your quick answer! El lun, 30-07-2007 a las 10:18 +0200, maximilian attems escribió: On Mon, Jul 30, 2007 at 09:08:14AM +0200, Antonio-M. Corbi Bellot wrote: 1) the framebuffer 'resolution' detection, I mean that in the booting process I get taller letters (deformed, they are stretched, also happens the same with the penguin logo) and the prompt is lost somewhere down under the screen. I can solve this by blindly typing: fbset 1024x768-60, but this didn't happen with kernels up to (and included) 2.6.21. I have tried several possible combinations in yaboot.conf: - append=video=nv:1024x768-60 ... - append=video=rivafb:1024x768-60 ... without luck. could you please report that bug upstream on bugzilla.kernel.org against the fb subsys. it might be interesting which kernel was the last one working. please feedback on the bugzilla bug nr. I've compiled a vanilla 2.6.22.1 from kernel.org and the frame buffer works ok, so I think it must be a config option in the Debian package. I attach you my 2.6.22.1 config in case you want to see it. I've to tell you that I've not checked it very well, but I remember I didn't managed to make usb work...but the frame buffer problem isn't anymore with this config. 2) it seems there's no ams (apple motion sensor) module built, it would be nice to have it. yo indeed, checkout latest trunk for it see apt lines - http://wiki.debian.org/DebianKernel I'll do it. thanks + regards Thanks. A. Corbi # # Automatically generated make config: don't edit # Linux kernel version: 2.6.22.1-pbook # Wed Jul 18 16:25:01 2007 # # CONFIG_PPC64 is not set CONFIG_PPC_PM_NEEDS_RTC_LIB=y CONFIG_PPC32=y CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y # CONFIG_PPC_UDBG_16550 is not set # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y # CONFIG_DEFAULT_UIMAGE is not set # # Processor support # CONFIG_CLASSIC32=y # CONFIG_PPC_82xx is not set # CONFIG_PPC_83xx is not set # CONFIG_PPC_85xx is not set # CONFIG_PPC_86xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_DEFCONFIG_LIST=/lib/modules/$UNAME_RELEASE/.config # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION= CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE= # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y # # Block layer # CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=m CONFIG_IOSCHED_DEADLINE=m CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED=cfq # # Platform support # CONFIG_PPC_MULTIPLATFORM=y # CONFIG_EMBEDDED6xx is not set # CONFIG_APUS is not set # CONFIG_PPC_CHRP is not set # CONFIG_PPC_MPC52xx is not set # CONFIG_PPC_MPC5200 is not set # CONFIG_PPC_EFIKA is not set # CONFIG_PPC_LITE5200 is not set CONFIG_PPC_PMAC=y # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set CONFIG_PPC_NATIVE=y CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259
Processed: bug 433750 is forwarded to http://bugzilla.kernel.org/show_bug.cgi?id=8794
Processing commands for [EMAIL PROTECTED]: # Automatically generated email from bts, devscripts version 2.10.6 forwarded 433750 http://bugzilla.kernel.org/show_bug.cgi?id=8794 Bug#433750: linux-image-2.6.22-1-686: UMTS card stopped working Noted your statement that Bug has been forwarded to http://bugzilla.kernel.org/show_bug.cgi?id=8794. End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processed: found 392915 in 2.6.18.dfsg.1-12
Processing commands for [EMAIL PROTECTED]: # Automatically generated email from bts, devscripts version 2.10.6 found 392915 2.6.18.dfsg.1-12 Bug#392915: xserver-xorg-video-ati: xserver freezes system when starting Bug#394450: xserver-xorg: new install , Radeon 9200 dual head : default conf hangs ; solution Bug marked as found in version 2.6.18.dfsg.1-12. End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#435226: log's incomplete
The log is incomplete... looks like the bcm43xx driver is so verbose, it kicked useful things out. Thus I can't see the output from the video driver which is the interesting bit... Also, is it nvidiafb or rivafb ? Cheers, Ben. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#435236: linux-image-2.6.22-1-r4k-ip22: Kernel fails to boot with the following error:
Package: linux-image-2.6.22-1-r4k-ip22 Version: Kernel fault Severity: critical Justification: breaks the whole system I tried to boot the kernel on indigo 2, running sid: Kernel fails to boot with the following error: arcsboot: ARCS Linux ext2fs loader 0.3.8.8 ext2fs - Illegal or malformed device name Can't open configuration file. Trying other partitions Please adjust OSLoadPartition to scsi(0)disk(1)rdisk(0)partition(0) Loading linux from scsi(0)disk(1)rdisk(0)partition(0) Allocated 0x38 bytes for segments Loading 64-bit executable Loading program segment 1 at 0x88004000, offset=0x0 4000, size = 0x0 45c086 468000 (cache: 95.4%)Zeroing memory at 0x73a86d, size = 0x0 Starting ELF64 kernel Linux version 2.6.22-1-r4k-ip22 (Debian 2.6.22-2) ([EMAIL PROTECTED]) (gcc version 4.1.3 20070629 (prerelease) (Debian 4.1.2-13)) #1 Mon Jul 23 23:38:03 UTC 2007 ARCH: SGI-IP22 PROMLIB: ARC firmware Version 1 Revision 10 CPU revision is: 0460 FPU revision is: 0500 MC: SGI memory controller Revision 3 MC: Probing memory configuration: bank0: 128M @ 0800 Determined physical RAM map: memory: 0800 @ 0800 (usable) Wasting 1835008 bytes for tracking 32768 unused pages Initrd not found or empty - disabling initrd Built 1 zonelists. Total pages: 64640 Kernel command line: root=/dev/sda1 auto Primary instruction cache 16kB, physically tagged, direct mapped, linesize 16 bytes. Primary data cache 16kB, direct mapped, linesize 16 bytes. Unified secondary cache 1024kB direct mapped, linesize 128 bytes. Synthesized TLB refill handler (32 instructions). Synthesized TLB load handler fastpath (45 instructions). Synthesized TLB store handler fastpath (45 instructions). Synthesized TLB modify handler fastpath (44 instructions). EISA: Probing bus... ISA support compiled in. PID hash table entries: 1024 (order: 10, 8192 bytes) Calibrating system timer... 1CPU 0 Unable to handle kernel paging request at virtual address 00b8, epc == 88005f4c, ra == 884169e8 Oops[#1]: Cpu 0 $ 0 : 8846 10624dd3 $ 4 : 00061c99 bfbd9000 ff80 $ 8 : 05f4 0001 883dbde4 $12 : 0004 0001 $16 : 88463b60 8840a000 0003 8881 $20 : 88810f14 887fe8f4 0008 8881 $24 : 1105 0001 $28 : 883d8000 883dbf60 887fe5ec 884169e8 Hi: 6422 Lo: 5e35971b epc : 88005f4c dosample+0xcc/0xf8 Not tainted ra: 884169e8 indy_time_init+0x38/0x190 Status: 14044ce2KX SX UX KERNEL EXL Cause : 800c BadVA : 00b8 PrId : 0460 Modules linked in: Process swapper (pid: 0, threadinfo=883d8000, task=883dc2f0) Stack : 88463b60 8840a000 0003 8841a764 arcsboot: ARCS Linux ext2fs loader 0.3.8.8 ext2fs - Illegal or malformed device name Can't open configuration file. Trying other partitions Please adjust OSLoadPartition to scsi(0)disk(1)rdisk(0)partition(0) Loading linux from scsi(0)disk(1)rdisk(0)partition(0) Allocated 0x38 bytes for segments Loading 64-bit executable Loading program segment 1 at 0x88004000, offset=0x0 4000, size = 0x0 45c086 468000 (cache: 95.4%)Zeroing memory at 0x73a86d, size = 0x0 Starting ELF64 kernel Linux version 2.6.22-1-r4k-ip22 (Debian 2.6.22-2) ([EMAIL PROTECTED]) (gcc version 4.1.3 20070629 (prerelease) (Debian 4.1.2-13)) #1 Mon Jul 23 23:38:03 UTC 2007 ARCH: SGI-IP22 PROMLIB: ARC firmware Version 1 Revision 10 CPU revision is: 0460 FPU revision is: 0500 MC: SGI memory controller Revision 3 MC: Probing memory configuration: bank0: 128M @ 0800 Determined physical RAM map: memory: 0800 @ 0800 (usable) Wasting 1835008 bytes for tracking 32768 unused pages Initrd not found or empty - disabling initrd Built 1 zonelists. Total pages: 64640 Kernel command line: root=/dev/sda1 auto Primary instruction cache 16kB, physically tagged, direct mapped, linesize 16 bytes. Primary data cache 16kB, direct mapped, linesize 16 bytes. Unified secondary cache 1024kB direct mapped, linesize 128 bytes. Synthesized TLB refill handler (32 instructions). Synthesized TLB load handler fastpath (45 instructions). Synthesized TLB store handler fastpath (45 instructions). Synthesized TLB modify handler fastpath (44 instructions). EISA: Probing bus... ISA support compiled in. PID hash table entries: 1024 (order: 10, 8192 bytes) Calibrating system timer... 1CPU 0 Unable to handle kernel paging request at virtual address 00b8, epc == 88005f4c, ra == 884169e8 Oops[#1]: Cpu 0 $ 0 : 8846 10624dd3 $ 4 : 00061c99
Processed: found 403871 in 2.6.18.dfsg.1-10
Processing commands for [EMAIL PROTECTED]: # Automatically generated email from bts, devscripts version 2.10.6 found 403871 2.6.18.dfsg.1-10 Bug#403871: radeon DRM incorrectly rejects valid offsets in some cases Bug marked as found in version 2.6.18.dfsg.1-10. End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processed: severity of 435236 is important
Processing commands for [EMAIL PROTECTED]: # Automatically generated email from bts, devscripts version 2.9.26 severity 435236 important Bug#435236: linux-image-2.6.22-1-r4k-ip22: Kernel fails to boot with the following error: Severity set to `important' from `critical' End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#435241: XEN: 4gb seg fixup in Dom0 reproducible with xen-tools
Package: linux-image-2.6.18-4-xen-686 Version: 2.6.18.dfsg.1-12etch2 Severity: important When using XEN in Debian I get repeatably lots of pages containing 4gb seg fixup-errors (details below) although i'm using libc6-xen and retried with /lib/tls removed as well. I was able to reproduce it every time and on different machines. Without starting any DomU enter the following command in Dom0 to create a new DomU with bootstraping (package xen-tools): xen-create-image --hostname testetch2 --debootstrap --dist etch I already assigned this bug report to xen-utils where I was hinted that this is not an issue with xen-tools (http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=431041). ERROR-DESCRIPTION: The errors apear shortly after this line appears... Installing your system with debootstrap mirror http://debian.inode.at/debian/ ... and won't stop until the next line (Done) from xen-tools appears.Errors (400+ lines) like this clutter up the the console: printk: 148430 messages suppressed. 4gb seg fixup, process apt-get (pid 12238), cs:ip 73:b7d09ccc And can be found in the syslog too: Jun 28 17:33:32 debian kernel: printk: 148430 messages suppressed. Jun 28 17:33:32 debian kernel: 4gb seg fixup, process apt-get (pid 12238), cs:ip 73:b7d09ccc They vary in the numbers and the process; other processes besides apt-get are e.g.: mount, base-files.post, dpkg, tar, update-alternat, tar, frontend, locale, dpkg-deb, dpkg-divert, preinst, ls ... and much more. USED CONFIGURATION: I am using Debian GNU/Linux 4.0 etch with the following components (from dpkg -l, value in brackets is column version): linux-image-2.6.18-4-xen-686 (2.6.18.dfsg.1-12etch2) libc6-xen (2.3.6.ds1-13) linux-modules-2.6.18-4-xen-686 (2.6.18.dfsg.1-12etch2) xen-hypervisor-3.0.3-1-i386-pae (3.0.3-0-2) xen-linux-system-2.6.18-4-xen-686 (2.6.18.dfsg.1-12etch2) xen-utils-3.0.3-1 (3.0.3-0-2) xen-tools (2.8-2) xen-utils-common (3.0.3-0-2) Both machines have pae in their /proc/cpuinfo. FURTHER INFOS: Another interesting fact is that the same approach in Ubuntu 7.04 Server (which is a Debian-derivate after all) works fine. Maybe it's possible to narrow the bug hunt by looking what's different there? I give the information about the Ubuntu packages as well, probably they will be useful. If not feel free to ignore the information: The xen-tools version in Ubuntu is 3.0.3-0ubuntu1 and libc6-xen is 2.5-0ubuntu14. Regards, Andreas -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processed: tagging 403871
Processing commands for [EMAIL PROTECTED]: # Automatically generated email from bts, devscripts version 2.10.6 tags 403871 etch Bug#403871: radeon DRM incorrectly rejects valid offsets in some cases Tags were: patch Tags added: etch End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#435241: XEN: 4gb seg fixup in Dom0 reproducible with xen-tools
(I cc both bugs but probably they should be merged) On Mon, 2007-07-30 at 12:30 +0200, [EMAIL PROTECTED] wrote: Package: linux-image-2.6.18-4-xen-686 Version: 2.6.18.dfsg.1-12etch2 Severity: important When using XEN in Debian I get repeatably lots of pages containing 4gb seg fixup-errors (details below) although i'm using libc6-xen and retried with /lib/tls removed as well. Is it possible that deboostrap (used by xen-tools) has installed the regular libc6 in the chroot initially and only installs libc6-xen later on, i.e. when the messages stop? All commands run in the chroot in that interval would then use the wrong libc, regardless of which is installed on the host. I don't see a special case in debootstrap for the xen libc, xen-tools installs libc6-xen later on. Ian. -- Ian Campbell Current Noise: Opeth - The Twilight Is My Robe We don't have to protect the environment -- the Second Coming is at hand. -- James Watt -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#404503: typo
An obvious temporary workaround is __not__ using an __8-bit__ locale... This is a quite serious typo that inverts the sense of the sentence... By the way, I don't agree that this is a good workaround, as it leads to different system setup, filenames or text file contents being encoded in different charset etc... so you'll get completely different result. A good workaround is to use other input methods, e.g. a good terminal emulator under X, or Alt+Number from numpad, or loading a keymap that contains the desired accented letters without dead keys... -- Egmont -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#435249: linux-image-2.6.21-2-k7: unbootable kernel
Package: linux-image-2.6.21-2-k7 Version: 2.6.21-6 Severity: important Hi Installing this version: - doesn't update symbolic links in / $ ls -l /vmlinuz lrwxrwxrwx 1 root root 24 Jul 30 11:33 /vmlinuz - boot/vmlinuz-2.6.18-4-k7 - lilo isnt' called. Mirek = aptitude session log: Selecting previously deselected package linux-image-2.6-k7. Unpacking linux-image-2.6-k7 (from .../linux-image-2.6-k7_2.6.21+8_i386.deb) ...Setting up linux-image-2.6.21-2-k7 (2.6.21-6) ... Running depmod. Finding valid ramdisk creators. Using mkinitramfs-kpkg to build the ramdisk. Setting up linux-image-2.6-k7 (2.6.21+8) ... Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done Writing extended state information... Done Building tag database... Done -- Package-specific info: -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.18-4-k7 (SMP w/1 CPU core) Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) (ignored: LC_ALL set to pl_PL) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.21-2-k7 depends on: ii initramfs-tools [linux-initr 0.89tools for generating an initramfs ii module-init-tools3.3-pre11-4 tools for managing Linux kernel mo Versions of packages linux-image-2.6.21-2-k7 recommends: ii libc6-i6862.6-2 GNU C Library: Shared libraries [i -- debconf information: linux-image-2.6.21-2-k7/preinst/initrd-2.6.21-2-k7: linux-image-2.6.21-2-k7/preinst/abort-install-2.6.21-2-k7: linux-image-2.6.21-2-k7/preinst/lilo-has-ramdisk: linux-image-2.6.21-2-k7/postinst/bootloader-error-2.6.21-2-k7: linux-image-2.6.21-2-k7/preinst/failed-to-move-modules-2.6.21-2-k7: linux-image-2.6.21-2-k7/preinst/elilo-initrd-2.6.21-2-k7: true linux-image-2.6.21-2-k7/postinst/old-system-map-link-2.6.21-2-k7: true linux-image-2.6.21-2-k7/preinst/already-running-this-2.6.21-2-k7: linux-image-2.6.21-2-k7/postinst/depmod-error-2.6.21-2-k7: false linux-image-2.6.21-2-k7/postinst/bootloader-test-error-2.6.21-2-k7: linux-image-2.6.21-2-k7/preinst/abort-overwrite-2.6.21-2-k7: linux-image-2.6.21-2-k7/preinst/lilo-initrd-2.6.21-2-k7: true linux-image-2.6.21-2-k7/postinst/create-kimage-link-2.6.21-2-k7: true shared/kernel-image/really-run-bootloader: true linux-image-2.6.21-2-k7/prerm/would-invalidate-boot-loader-2.6.21-2-k7: true * linux-image-2.6.21-2-k7/preinst/bootloader-initrd-2.6.21-2-k7: false linux-image-2.6.21-2-k7/postinst/kimage-is-a-directory: linux-image-2.6.21-2-k7/preinst/overwriting-modules-2.6.21-2-k7: true linux-image-2.6.21-2-k7/postinst/depmod-error-initrd-2.6.21-2-k7: false linux-image-2.6.21-2-k7/postinst/old-initrd-link-2.6.21-2-k7: true linux-image-2.6.21-2-k7/prerm/removing-running-kernel-2.6.21-2-k7: true linux-image-2.6.21-2-k7/postinst/old-dir-initrd-link-2.6.21-2-k7: true -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processed: Re: Bug#435249: linux-image-2.6.21-2-k7: unbootable kernel
Processing commands for [EMAIL PROTECTED]: tags 435249 moreinfo Bug#435249: linux-image-2.6.21-2-k7: unbootable kernel There were no tags set. Tags added: moreinfo stop Stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#435249: linux-image-2.6.21-2-k7: unbootable kernel
tags 435249 moreinfo stop On Mon, Jul 30, 2007 at 02:23:28PM +0200, Miroslaw Kwasniak wrote: Installing this version: - doesn't update symbolic links in / $ ls -l /vmlinuz lrwxrwxrwx 1 root root 24 Jul 30 11:33 /vmlinuz - boot/vmlinuz-2.6.18-4-k7 - lilo isnt' called. please post the output of cat /etc/kernel-img.conf -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processed: closing 394359
Processing commands for [EMAIL PROTECTED]: # Automatically generated email from bts, devscripts version 2.10.6 # duplicate bug close 394359 Bug#394359: linux-headers-2.6.18-1-amd64: Missing /lib/modules/2.6.18-1-amd64/build link 'close' is deprecated; see http://www.debian.org/Bugs/Developer#closing. Bug closed, send any further explanations to Kevin Glynn [EMAIL PROTECTED] End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#369472: marked as done (iptables modules)
Your message dated Mon, 30 Jul 2007 14:35:09 +0200 with message-id [EMAIL PROTECTED] and subject line iptables modules has caused the attached Bug report to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what I am talking about this indicates a serious mail system misconfiguration somewhere. Please contact me immediately.) Debian bug tracking system administrator (administrator, Debian Bugs database) ---BeginMessage--- Package: kernel-image Version: 2.6.8-12-em64t-p4-smp serwer:/var/log# uname -a Linux serwer.interdar.pl 2.6.8-12-em64t-p4-smp #1 SMP Thu Feb 9 08:38:33 UTC 2006 x86_64 GNU/Linux Debian GNU/Linux 3.1 stable, updated Problem: serwer:/var/log# iptables -L iptables v1.2.11: can't initialize iptables table `filter': Module is wrong version Perhaps iptables or your kernel needs to be upgraded. Cheers guys Paul Send instant messages to your online friends http://uk.messenger.yahoo.com ---End Message--- ---BeginMessage--- Version: 2.6.18-1 fixed in newer upstream thus closing -- maks ---End Message---
Bug#375283: marked as done (linux-2.6.16: descriptions for linux-modules packages missing important information)
Your message dated Mon, 30 Jul 2007 14:38:20 +0200 with message-id [EMAIL PROTECTED] and subject line linux-2.6.16: descriptions for linux-modules packages missing important information has caused the attached Bug report to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what I am talking about this indicates a serious mail system misconfiguration somewhere. Please contact me immediately.) Debian bug tracking system administrator (administrator, Debian Bugs database) ---BeginMessage--- Package: linux-2.6.16 Version: 2.6.16-15 Severity: normal Descriptions for binary packages linux-modules-2.6.16-2-xen-686, linux-modules-2.6.16-2-xen-k7 and linux-modules-2.6.16-2-xen-vserver-686 are missing important information. There is obviously something wrong since linux-modules-2.6.16-2-xen-vserver-686 and linux-modules-2.6.16-2-xen-686 have identical descriptions. Also, I don't have a clue about the rationale for these packages, but in general, the descriptions do not give a clue what is the difference between the modules included in, for example, linux-modules-2.6.16-2-xen-686, and those in, in this example, linux-image-2.6.16-2-686. ---End Message--- ---BeginMessage--- dup of #360763 thus closing in this round of linux-2.6 bug cleanup. -- maks ---End Message---
Processed: reopening 392015
Processing commands for [EMAIL PROTECTED]: # Automatically generated email from bts, devscripts version 2.10.6 reopen 392015 Bug#392015: Request for openvz patched binary kernels. Bug reopened, originator not changed. End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#435062: linux-image-2.6.22-1-k7: nforce2 firewire unsupported in new stack, please enable old fw stack
On 29/07/07 10:50, maximilian attems wrote: please file aboves report in bugzilla.kernel.org and inform us of your bug nr. Done, see: http://bugzilla.kernel.org/show_bug.cgi?id=8828 Thanks, -- Mourad DC -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processed: closing 394373
Processing commands for [EMAIL PROTECTED]: # Automatically generated email from bts, devscripts version 2.10.6 # duplicate bug close 394373 Bug#394373: linux-headers-2.6.18-1-amd64: Missing /lib/modules/2.6.18-1-amd64/build link 'close' is deprecated; see http://www.debian.org/Bugs/Developer#closing. Bug closed, send any further explanations to Kevin Glynn [EMAIL PROTECTED] End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#419197: sane-backends with CONFIG_USB_SUSPEND workaround uploaded to unstable
Hi, FYI: I've just uploaded to unstable a new version of sane-backends which includes a workaround for CONFIG_USB_SUSPEND. This workaround only works with Linux 2.6.22 up, though. As far as sane-backends (and sane-backends-extras) is concerned, this bug can be closed; the problems we've seen are in fact hardware bugs related to the improper support of USB suspend by most (if not all) USB scanners. The workaround included in sane-backends is only active for scanners supported by sane-backends; other packages like hpoj/hplip or libgphoto may still encounter this problem until they apply a similar workaround. JB. -- Julien BLACHE [EMAIL PROTECTED] | Debian, because code matters more Debian GNU/Linux Developer| http://www.debian.org Public key available on http://www.jblache.org - KeyID: F5D6 5169 GPG Fingerprint : 935A 79F1 C8B3 3521 FD62 7CC7 CD61 4FD7 F5D6 5169 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#435248: linux-image-2.6.21-2-k7: non-clean unistall
Package: linux-image-2.6.21-2-k7 Version: Non-clean unistall Severity: normal aptitude after purging this kernel leaves a file: /lib/modules/2.6.21-2-k7/modules.seriomap Mirek -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.18-4-k7 (SMP w/1 CPU core) Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) (ignored: LC_ALL set to pl_PL) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.21-2-k7 depends on: ii initramfs-tools [linux-initr 0.89tools for generating an initramfs ii module-init-tools3.3-pre11-4 tools for managing Linux kernel mo Versions of packages linux-image-2.6.21-2-k7 recommends: ii libc6-i6862.6-2 GNU C Library: Shared libraries [i -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#435249: linux-image-2.6.21-2-k7: unbootable kernel
On Mon, Jul 30, 2007 at 02:36:26PM +0200, maximilian attems wrote: tags 435249 moreinfo stop On Mon, Jul 30, 2007 at 02:23:28PM +0200, Miroslaw Kwasniak wrote: Installing this version: - doesn't update symbolic links in / $ ls -l /vmlinuz lrwxrwxrwx 1 root root 24 Jul 30 11:33 /vmlinuz - boot/vmlinuz-2.6.18-4-k7 - lilo isnt' called. please post the output of cat /etc/kernel-img.conf $ cat /etc/kernel-img.conf # Do not create symbolic links in / Do_Symlinks = Yes -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Processed: bug 435062 is forwarded to http://bugzilla.kernel.org/show_bug.cgi?id=8828
Processing commands for [EMAIL PROTECTED]: # Automatically generated email from bts, devscripts version 2.10.6 forwarded 435062 http://bugzilla.kernel.org/show_bug.cgi?id=8828 Bug#435062: linux-image-2.6.22-1-k7: nforce2 firewire unsupported in new stack, please enable old fw stack Noted your statement that Bug has been forwarded to http://bugzilla.kernel.org/show_bug.cgi?id=8828. End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#435226: log's incomplete
Benjamin Herrenschmidt [EMAIL PROTECTED] writes: The log is incomplete... looks like the bcm43xx driver is so verbose, it kicked useful things out. Thus I can't see the output from the video driver which is the interesting bit... Also, is it nvidiafb or rivafb ? After sending the bug report I compiled myself a vanilla 2.6.22.1 from kernel.org and the framebuffer is correctly detected and resolution set (1024x768 for my powerbook-12). So it must be a problem with the debian config (I think). A. Corbi -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#435226: log's incomplete
On Mon, Jul 30, 2007 at 03:39:24PM +0200, Antonio-M. Corbi Bellot wrote: Benjamin Herrenschmidt [EMAIL PROTECTED] writes: The log is incomplete... looks like the bcm43xx driver is so verbose, it kicked useful things out. Thus I can't see the output from the video driver which is the interesting bit... Also, is it nvidiafb or rivafb ? After sending the bug report I compiled myself a vanilla 2.6.22.1 from kernel.org and the framebuffer is correctly detected and resolution set (1024x768 for my powerbook-12). So it must be a problem with the debian config (I think). did you read the responses? with modular fb you need to pass kernel bootargs, please provide which you used? -- maks -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#435249: marked as done (linux-image-2.6.21-2-k7: unbootable kernel)
Your message dated Mon, 30 Jul 2007 15:59:23 +0200 with message-id [EMAIL PROTECTED] and subject line Bug#435249: linux-image-2.6.21-2-k7: unbootable kernel has caused the attached Bug report to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what I am talking about this indicates a serious mail system misconfiguration somewhere. Please contact me immediately.) Debian bug tracking system administrator (administrator, Debian Bugs database) ---BeginMessage--- Package: linux-image-2.6.21-2-k7 Version: 2.6.21-6 Severity: important Hi Installing this version: - doesn't update symbolic links in / $ ls -l /vmlinuz lrwxrwxrwx 1 root root 24 Jul 30 11:33 /vmlinuz - boot/vmlinuz-2.6.18-4-k7 - lilo isnt' called. Mirek = aptitude session log: Selecting previously deselected package linux-image-2.6-k7. Unpacking linux-image-2.6-k7 (from .../linux-image-2.6-k7_2.6.21+8_i386.deb) ...Setting up linux-image-2.6.21-2-k7 (2.6.21-6) ... Running depmod. Finding valid ramdisk creators. Using mkinitramfs-kpkg to build the ramdisk. Setting up linux-image-2.6-k7 (2.6.21+8) ... Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done Writing extended state information... Done Building tag database... Done -- Package-specific info: -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.18-4-k7 (SMP w/1 CPU core) Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) (ignored: LC_ALL set to pl_PL) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.21-2-k7 depends on: ii initramfs-tools [linux-initr 0.89tools for generating an initramfs ii module-init-tools3.3-pre11-4 tools for managing Linux kernel mo Versions of packages linux-image-2.6.21-2-k7 recommends: ii libc6-i6862.6-2 GNU C Library: Shared libraries [i -- debconf information: linux-image-2.6.21-2-k7/preinst/initrd-2.6.21-2-k7: linux-image-2.6.21-2-k7/preinst/abort-install-2.6.21-2-k7: linux-image-2.6.21-2-k7/preinst/lilo-has-ramdisk: linux-image-2.6.21-2-k7/postinst/bootloader-error-2.6.21-2-k7: linux-image-2.6.21-2-k7/preinst/failed-to-move-modules-2.6.21-2-k7: linux-image-2.6.21-2-k7/preinst/elilo-initrd-2.6.21-2-k7: true linux-image-2.6.21-2-k7/postinst/old-system-map-link-2.6.21-2-k7: true linux-image-2.6.21-2-k7/preinst/already-running-this-2.6.21-2-k7: linux-image-2.6.21-2-k7/postinst/depmod-error-2.6.21-2-k7: false linux-image-2.6.21-2-k7/postinst/bootloader-test-error-2.6.21-2-k7: linux-image-2.6.21-2-k7/preinst/abort-overwrite-2.6.21-2-k7: linux-image-2.6.21-2-k7/preinst/lilo-initrd-2.6.21-2-k7: true linux-image-2.6.21-2-k7/postinst/create-kimage-link-2.6.21-2-k7: true shared/kernel-image/really-run-bootloader: true linux-image-2.6.21-2-k7/prerm/would-invalidate-boot-loader-2.6.21-2-k7: true * linux-image-2.6.21-2-k7/preinst/bootloader-initrd-2.6.21-2-k7: false linux-image-2.6.21-2-k7/postinst/kimage-is-a-directory: linux-image-2.6.21-2-k7/preinst/overwriting-modules-2.6.21-2-k7: true linux-image-2.6.21-2-k7/postinst/depmod-error-initrd-2.6.21-2-k7: false linux-image-2.6.21-2-k7/postinst/old-initrd-link-2.6.21-2-k7: true linux-image-2.6.21-2-k7/prerm/removing-running-kernel-2.6.21-2-k7: true linux-image-2.6.21-2-k7/postinst/old-dir-initrd-link-2.6.21-2-k7: true ---End Message--- ---BeginMessage--- On Mon, Jul 30, 2007 at 02:59:17PM +0200, Miroslaw Kwasniak wrote: On Mon, Jul 30, 2007 at 02:36:26PM +0200, maximilian attems wrote: tags 435249 moreinfo stop On Mon, Jul 30, 2007 at 02:23:28PM +0200, Miroslaw Kwasniak wrote: Installing this version: - doesn't update symbolic links in / $ ls -l /vmlinuz lrwxrwxrwx 1 root root 24 Jul 30 11:33 /vmlinuz - boot/vmlinuz-2.6.18-4-k7 - lilo isnt' called. please post the output of cat /etc/kernel-img.conf $ cat /etc/kernel-img.conf # Do not create symbolic links in / Do_Symlinks = Yes as expected no line with do_bootloader = yes anyway the other minor bug you mentioned is a bug in kernel-package, feel free to report against it. newer linux-image won't use it anymore. closing -- maks ---End Message---
Bug#431657: automatic wlan connection at bootprocess on Etch only on second try
Am Sonntag, 29. Juli 2007 15:49 schrieb Jurij Smakov: Hi, After reading the thread on debianhelp [0], I wonder whether your problems might be related to wpa_supplicant configuration. Maybe it fails to authenticate to access point the first time during some race condition? Could you post the output of your wpa_supplicant configuration file (after stripping out sensitive information), and check whether you get any error messages from wpa in the logs (dmesg, /var/log/messages, /var/log/syslog, /var/log/kern.log). [0] http://www.debianhelp.org/node/8512 Etch-nb:~# cat /etc/wpa_supplicant/wpa_supplicant.mynet.conf # WPA-PSK/TKIP ctrl_interface=/var/run/wpa_supplicant network={ ssid=allnet key_mgmt=WPA-PSK proto=WPA pairwise=TKIP group=TKIP psk=generated WPA PSK with wpa_passphrase } There are no error messages from wpa in the logs: Etch-nb:~# dmesg | grep -i wpa Etch-nb:~# grep -i wpa /var/log/syslog Etch-nb:~# grep -i wpa /var/log/kern.log Etch-nb:~# grep -i wpa /var/log/messages Etch-nb:~# Regards, Michael -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#435257: linux-image-2.6.22-1-686 doesn't detect Samsung ML-2010 USB printer
Package: linux-image-2.6.22-1-686 Version: 2.6.22-3 Severity: normal linux-image-2.6.18-3-686 detects the Samsung ML-2010 USB printer that works fine, but linux-image-2.6.22-1-686 not. lsusb with linux-image-2.6.18-3-686: $ sudo lsusb Bus 005 Device 001: ID : Bus 004 Device 001: ID : Bus 003 Device 002: ID 045e:00e1 Microsoft Corp. Bus 003 Device 001: ID : Bus 001 Device 008: ID 059b:0274 Iomega Corp. Bus 001 Device 010: ID 07ab:fccf Freecom Technologies Bus 001 Device 005: ID 413c:2010 Dell Computer Corp. Bus 001 Device 009: ID 04e8:326c Samsung Electronics Co., Ltd Bus 001 Device 007: ID 06bd:2061 AGFA-Gevaert NV SnapScan 1212U (?) Bus 001 Device 006: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 001 Device 004: ID 050f:0003 KC Technology, Inc. KC82C160S Hub Bus 001 Device 003: ID 413c:1003 Dell Computer Corp. Bus 001 Device 001: ID : Bus 002 Device 002: ID 051d:0002 American Power Conversion Back-UPS Pro 500/1000/1500 Bus 002 Device 001: ID : and lsusb with linux-image-2.6.22-1-686: $ sudo lsusb Bus 005 Device 001: ID : Bus 002 Device 002: ID 051d:0002 American Power Conversion Back-UPS Pro 500/1000/1500 Bus 002 Device 001: ID : Bus 001 Device 011: ID 07ab:fccf Freecom Technologies Bus 001 Device 009: ID 059b:0274 Iomega Corp. Bus 001 Device 008: ID 06bd:2061 AGFA-Gevaert NV SnapScan 1212U (?) Bus 001 Device 007: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 001 Device 006: ID 413c:2010 Dell Computer Corp. Bus 001 Device 005: ID 050f:0003 KC Technology, Inc. KC82C160S Hub Bus 001 Device 004: ID 413c:1003 Dell Computer Corp. Bus 001 Device 001: ID : Bus 004 Device 001: ID : Bus 003 Device 002: ID 045e:00e1 Microsoft Corp. Bus 003 Device 001: ID : (ID 04e8:326c Samsung Electronics Co., Ltd not found) When I try to print, can see this message loop in dmesg: usb 1-2.3: USB disconnect, address 14 drivers/usb/class/usblp.c: usblp0: removed usb 1-2.3: new full speed USB device using uhci_hcd and address 15 usb 1-2.3: configuration #1 chosen from 1 choice drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 15 if 0 alt 0 proto 2 vid 0x04E8 pid 0x326C usb 1-2.3: USB disconnect, address 15 drivers/usb/class/usblp.c: usblp0: removed usb 1-2.3: new full speed USB device using uhci_hcd and address 16 usb 1-2.3: configuration #1 chosen from 1 choice drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 16 if 0 alt 0 proto 2 vid 0x04E8 pid 0x326C usb 1-2.3: USB disconnect, address 16 drivers/usb/class/usblp.c: usblp0: removed usb 1-2.3: new full speed USB device using uhci_hcd and address 17 usb 1-2.3: configuration #1 chosen from 1 choice drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 17 if 0 alt 0 proto 2 vid 0x04E8 pid 0x326C usb 1-2.3: USB disconnect, address 17 drivers/usb/class/usblp.c: usblp0: removed usb 1-2.3: new full speed USB device using uhci_hcd and address 18 usb 1-2.3: configuration #1 chosen from 1 choice drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 18 if 0 alt 0 proto 2 vid 0x04E8 pid 0x326C usb 1-2.3: USB disconnect, address 18 [snip] usb 1-2.3: USB disconnect, address 39 drivers/usb/class/usblp.c: usblp0: removed usb 1-2.3: new full speed USB device using uhci_hcd and address 40 usb 1-2.3: configuration #1 chosen from 1 choice drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 40 if 0 alt 0 proto 2 vid 0x04E8 pid 0x32 [...] Thanks! Best regards. -- Package-specific info: ** Version: Linux version 2.6.22-1-686 (Debian 2.6.22-3) ([EMAIL PROTECTED]) (gcc version 4.1.3 20070718 (prerelease) (Debian 4.1.2-14)) #1 SMP Sun Jul 29 14:37:42 UTC 2007 ** Not tainted ** Kernel log: Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 ip_tables: (C) 2000-2006 Netfilter Core Team bttv0: PLL can sleep, using XTAL (28636363). usb 1-2.3: USB disconnect, address 13 drivers/usb/class/usblp.c: usblp0: removed usb 1-2.3: new full speed USB device using uhci_hcd and address 14 usb 1-2.3: configuration #1 chosen from 1 choice drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 14 if 0 alt 0 proto 2 vid 0x04E8 pid 0x326C kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sdc1, internal journal EXT3-fs: mounted filesystem with ordered data mode. usb 1-2.3: USB disconnect, address 14 drivers/usb/class/usblp.c: usblp0: removed usb 1-2.3: new full speed USB device using uhci_hcd and address 15 usb 1-2.3: configuration #1 chosen from 1 choice
Bug#435263: linux-image-2.6.22-1-k7: Configure fails
Package: linux-image-2.6.22-1-k7 Version: 2.6.22-3 Severity: grave Justification: renders package unusable When trying to upgrade from 2.6.22-2 to 2.6.22-3 I get the following error: Setting up linux-image-2.6.22-1-k7 (2.6.22-3) ... Running depmod. Finding valid ramdisk creators. Using mkinitrd.yaird to build the ramdisk. yaird error: unrecognised line in /proc/bus/input/devices: U: Uniq= (fatal) mkinitrd.yaird failed to create initrd image. Failed to create initrd image. dpkg: error processing linux-image-2.6.22-1-k7 (--configure): subprocess post-installation script returned error exit status 9 Which lets me with a non configured (and presumabley non bootable) system. -- Package-specific info: ** Version: Linux version 2.6.22-1-k7 (Debian 2.6.22-2) ([EMAIL PROTECTED]) (gcc version 4.1.3 20070718 (prerelease) (Debian 4.1.2-14)) #1 SMP Mon Jul 23 14:02:09 UTC 2007 ** Not tainted ** Kernel log: IN=eth0 OUT= MAC=00:e0:7d:8f:5e:9e:00:12:17:d4:d3:c8:08:00 SRC=82.227.0.127 DST=10.0.0.1 LEN=48 TOS=0x00 PREC=0x00 TTL=121 ID=1653 DF PROTO=TCP SPT=3268 DPT=1433 WINDOW=64240 RES=0x00 SYN URGP=0 IN=eth0 OUT= MAC=00:e0:7d:8f:5e:9e:00:12:17:d4:d3:c8:08:00 SRC=82.227.0.127 DST=10.0.0.1 LEN=48 TOS=0x00 PREC=0x00 TTL=121 ID=1957 DF PROTO=TCP SPT=3268 DPT=1433 WINDOW=64240 RES=0x00 SYN URGP=0 IN=eth0 OUT= MAC=00:e0:7d:8f:5e:9e:00:12:17:d4:d3:c8:08:00 SRC=82.227.133.17 DST=10.0.0.1 LEN=48 TOS=0x00 PREC=0x00 TTL=121 ID=29726 DF PROTO=TCP SPT=4779 DPT=1433 WINDOW=16384 RES=0x00 SYN URGP=0 IN=eth0 OUT= MAC=00:e0:7d:8f:5e:9e:00:12:17:d4:d3:c8:08:00 SRC=82.227.238.226 DST=10.0.0.1 LEN=48 TOS=0x00 PREC=0x00 TTL=121 ID=25498 DF PROTO=TCP SPT=3264 DPT=1433 WINDOW=64240 RES=0x00 SYN URGP=0 IN=eth0 OUT= MAC=00:e0:7d:8f:5e:9e:00:12:17:d4:d3:c8:08:00 SRC=215.80.212.169 DST=10.0.0.1 LEN=393 TOS=0x00 PREC=0x00 TTL=51 ID=3418 PROTO=UDP SPT=31186 DPT=1026 LEN=373 IN=eth0 OUT= MAC=00:e0:7d:8f:5e:9e:00:12:17:d4:d3:c8:08:00 SRC=66.112.28.51 DST=10.0.0.1 LEN=40 TOS=0x00 PREC=0x00 TTL=111 ID=256 PROTO=TCP SPT=6750 DPT=5900 WINDOW=55808 RES=0x00 SYN URGP=0 IN=eth0 OUT= MAC=00:e0:7d:8f:5e:9e:00:12:17:d4:d3:c8:08:00 SRC=82.227.29.113 DST=10.0.0.1 LEN=48 TOS=0x00 PREC=0x00 TTL=120 ID=64660 DF PROTO=TCP SPT=1237 DPT=1433 WINDOW=64240 RES=0x00 SYN URGP=0 IN=eth0 OUT= MAC=00:e0:7d:8f:5e:9e:00:12:17:d4:d3:c8:08:00 SRC=82.227.29.113 DST=10.0.0.1 LEN=48 TOS=0x00 PREC=0x00 TTL=120 ID=547 DF PROTO=TCP SPT=1237 DPT=1433 WINDOW=64240 RES=0x00 SYN URGP=0 IN=eth0 OUT= MAC=00:e0:7d:8f:5e:9e:00:12:17:d4:d3:c8:08:00 SRC=210.245.151.30 DST=10.0.0.1 LEN=40 TOS=0x00 PREC=0x00 TTL=101 ID=256 PROTO=TCP SPT=6000 DPT=1433 WINDOW=16384 RES=0x00 SYN URGP=0 IN=eth0 OUT= MAC=00:e0:7d:8f:5e:9e:00:12:17:d4:d3:c8:08:00 SRC=82.227.29.113 DST=10.0.0.1 LEN=48 TOS=0x00 PREC=0x00 TTL=120 ID=21918 DF PROTO=TCP SPT=1229 DPT=1433 WINDOW=64240 RES=0x00 SYN URGP=0 IN=eth0 OUT= MAC=00:e0:7d:8f:5e:9e:00:12:17:d4:d3:c8:08:00 SRC=76.123.253.192 DST=10.0.0.1 LEN=392 TOS=0x00 PREC=0x00 TTL=54 ID=25610 PROTO=UDP SPT=31186 DPT=1026 LEN=372 IN=eth0 OUT= MAC=00:e0:7d:8f:5e:9e:00:12:17:d4:d3:c8:08:00 SRC=163.183.225.125 DST=10.0.0.1 LEN=392 TOS=0x00 PREC=0x00 TTL=54 ID=843 PROTO=UDP SPT=31186 DPT=1026 LEN=372 IN=eth0 OUT= MAC=00:e0:7d:8f:5e:9e:00:12:17:d4:d3:c8:08:00 SRC=82.45.2.254 DST=10.0.0.1 LEN=64 TOS=0x00 PREC=0x00 TTL=32 ID=44239 DF PROTO=TCP SPT=2009 DPT=1433 WINDOW=53760 RES=0x00 SYN URGP=0 IN=eth0 OUT= MAC=00:e0:7d:8f:5e:9e:00:12:17:d4:d3:c8:08:00 SRC=82.45.2.254 DST=10.0.0.1 LEN=64 TOS=0x00 PREC=0x00 TTL=32 ID=45052 DF PROTO=TCP SPT=2009 DPT=1433 WINDOW=53760 RES=0x00 SYN URGP=0 IN=eth0 OUT= MAC=00:e0:7d:8f:5e:9e:00:12:17:d4:d3:c8:08:00 SRC=82.227.116.89 DST=10.0.0.1 LEN=48 TOS=0x00 PREC=0x00 TTL=121 ID=29542 DF PROTO=TCP SPT=1848 DPT=1433 WINDOW=16384 RES=0x00 SYN URGP=0 IN=eth0 OUT= MAC=00:e0:7d:8f:5e:9e:00:12:17:d4:d3:c8:08:00 SRC=183.207.110.205 DST=10.0.0.1 LEN=401 TOS=0x00 PREC=0x00 TTL=54 ID=36960 PROTO=UDP SPT=31186 DPT=1026 LEN=381 IN=eth0 OUT= MAC=00:e0:7d:8f:5e:9e:00:12:17:d4:d3:c8:08:00 SRC=218.27.148.138 DST=10.0.0.1 LEN=495 TOS=0x00 PREC=0x00 TTL=36 ID=0 DF PROTO=UDP SPT=49543 DPT=1026 LEN=475 IN=eth0 OUT= MAC=00:e0:7d:8f:5e:9e:00:12:17:d4:d3:c8:08:00 SRC=98.227.65.146 DST=10.0.0.1 LEN=391 TOS=0x00 PREC=0x00 TTL=54 ID=1943 PROTO=UDP SPT=31186 DPT=1026 LEN=371 IN=eth0 OUT= MAC=00:e0:7d:8f:5e:9e:00:12:17:d4:d3:c8:08:00 SRC=82.227.116.89 DST=10.0.0.1 LEN=48 TOS=0x00 PREC=0x00 TTL=121 ID=26420 DF PROTO=TCP SPT=2807 DPT=1433 WINDOW=16384 RES=0x00 SYN URGP=0 IN=eth0 OUT= MAC=00:e0:7d:8f:5e:9e:00:12:17:d4:d3:c8:08:00 SRC=9.195.112.195 DST=10.0.0.1 LEN=393 TOS=0x00 PREC=0x00 TTL=54 ID=61640 PROTO=UDP SPT=31186 DPT=1026 LEN=373 IN=eth0 OUT= MAC=00:e0:7d:8f:5e:9e:00:12:17:d4:d3:c8:08:00 SRC=82.227.29.113 DST=10.0.0.1 LEN=48 TOS=0x00 PREC=0x00 TTL=120 ID=63557 DF PROTO=TCP SPT=2601 DPT=1433 WINDOW=64240 RES=0x00 SYN URGP=0 IN=eth0 OUT= MAC=00:e0:7d:8f:5e:9e:00:12:17:d4:d3:c8:08:00 SRC=82.227.29.113
Bug#435257: linux-image-2.6.22-1-686 doesn't detect Samsung ML-2010 USB printer
On Mon, Jul 30, 2007 at 04:33:02PM +0200, Benjamí Villoslada wrote: linux-image-2.6.18-3-686 detects the Samsung ML-2010 USB printer that works fine, but linux-image-2.6.22-1-686 not. i see, there is a new usblp maintainer, he neeeds to see that trouble. please file your bugreport on bugzilla.kernel.org and notify us with the respective bugzilla bug nr. regards -- maks
Processed: reassign 435263 to yaird
Processing commands for [EMAIL PROTECTED]: # Automatically generated email from bts, devscripts version 2.9.26 reassign 435263 yaird Bug#435263: linux-image-2.6.22-1-k7: Configure fails Bug reassigned from package `linux-image-2.6.22-1-k7' to `yaird'. End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#435268: linux-image-2.6.22-1-k7: Thelatest package of the image cannot be installed
Package: linux-image-2.6.22-1-k7 Version: 2.6.22-3 Severity: important -- Package-specific info: ** Version: Linux version 2.6.22-1-k7 (Debian 2.6.22-3) ([EMAIL PROTECTED]) (gcc version 4.1.3 20070718 (prerelease) (Debian 4.1.2-14)) #1 SMP Sun Jul 29 15:15:55 UTC 2007 ** Tainted: PFSRMB ** Kernel log: bttv0: Hauppauge eeprom indicates model#0 bttv0: using tuner=5 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: i2c: checking for TDA9887 @ 0x86... not found tuner 1-0060: All bytes are equal. It is not a TEA5767 tuner 1-0060: chip found @ 0xc0 (bt878 #0 [sw]) tuner 1-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) tuner 1-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 = 35468950 .. ok PCI: Enabling device :00:11.5 ( - 0001) ACPI: PCI Interrupt :00:11.5[C] - GSI 22 (level, low) - IRQ 20 PCI: Setting latency timer of device :00:11.5 to 64 bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). PCI: Enabling device :00:0d.1 (0004 - 0006) ACPI: PCI Interrupt :00:0d.1[A] - GSI 16 (level, low) - IRQ 19 bt878_probe: card id=[0x0], Unknown card. Exiting.. ACPI: PCI interrupt for device :00:0d.1 disabled bt878: probe of :00:0d.1 failed with error -22 usb 1-1: new low speed USB device using uhci_hcd and address 3 usb 1-1: configuration #1 chosen from 1 choice usb 1-2: new full speed USB device using uhci_hcd and address 4 usb 1-2: configuration #1 chosen from 1 choice usb 2-1: new low speed USB device using uhci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: USB Mouse as /class/input/input2 input: USB HID v1.00 Mouse [USB Mouse] on usb-:00:10.0-1 drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x018C input: HID 0583:668f as /class/input/input3 input: USB HID v1.00 Joystick [HID 0583:668f] on usb-:00:10.1-1 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... scsi3 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning Adding 1951888k swap on /dev/hda2. Priority:-1 extents:1 across:1951888k EXT3 FS on hda3, internal journal PPP generic driver version 2.4.2 PPP BSD Compression module registered e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation NET: Registered protocol family 24 usbcore: registered new interface driver usbmouse drivers/hid/usbhid/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver usbcore: registered new interface driver usbkbd drivers/hid/usbhid/usbkbd.c: :USB HID Boot Protocol keyboard driver QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice Bellard KQEMU installed, max_locked_mem=258312kB. device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED] fuse init (API version 7.8) usb-storage: device scan complete scsi 3:0:0:0: Direct-Access Brother DCP-115C 1.00 PQ: 0 ANSI: 2 sd 3:0:0:0: [sda] Attached SCSI removable disk NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready b44: eth0: Link is up at 100 Mbps, full duplex. b44: eth0: Flow control is off for TX and off for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present input: Power Button (FF) as /class/input/input4 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input5 ACPI: Power Button (CM) [PWRB] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon! device eth0 entered promiscuous mode audit(1185805388.928:2): dev=eth0 prom=256 old_prom=0 auid=4294967295 Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt :01:00.0[A] - GSI 16 (level, low) - IRQ 19
Processed: tagging 431773
Processing commands for [EMAIL PROTECTED]: # Automatically generated email from bts, devscripts version 2.9.26 tags 431773 + pending Bug#431773: libqt4-dev: Missing mkspec files on hppa Tags were: lenny sid patch Bug#427398: scandir syscall broken on hppa Bug#433768: getdent(3) broken on hppa Tags added: pending End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#435257: linux-image-2.6.22-1-686 doesn't detect Samsung ML-2010 USB printer
ou are not allowed to store it in your Windows computer. MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Message-Id: [EMAIL PROTECTED] X-Spam-Checker-Version: SpamAssassin 2.60-bugs.debian.org_2005_01_02 (1.212-2003-09-23-exp) on rietz.debian.org X-Spam-Level: X-Spam-Status: No, hits=-6.0 required=4.0 tests=BAYES_00,HAS_BUG_NUMBER autolearn=no version=2.60-bugs.debian.org_2005_01_02 El Dilluns 30 Juliol 2007, maximilian attems va escriure: On Mon, Jul 30, 2007 at 04:33:02PM +0200, Benjam=ED Villoslada wrote: linux-image-2.6.18-3-686 detects the Samsung ML-2010 USB printer that works fine, but linux-image-2.6.22-1-686 not. i see, there is a new usblp maintainer, he neeeds to see that trouble. please file your bugreport on bugzilla.kernel.org and notify us with the respective bugzilla bug nr. After my bug send, I've seen this in Kernel Bugzilla: http://bugzilla.kernel.org/show_bug.cgi?id=3D8606#c4 Maybe our Debian Kernel have CONFIG_USB_SUSPEND enabled? Regards, =2D-=20 Benjam=ED http://blog.bitassa.cat =2E -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#435280: black screen after X starts (Radeon Xpress 200M)
Package: linux-image-2.6.22-1-686 Version: 2.6.22-3 Severity: normal With kernel 2.6.22-1-686, my laptop's screen goes black when X starts and stays that way. I can reboot by pressing the power button. This does not happen with 2.6.21-2 (2.6.21-6). I am appending Xorg.0.log to the bug report (generated under 2.6.21). Please let me know if you need any further information. -- Package-specific info: -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.21-2-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.22-1-686 depends on: ii initramfs-tools [linux-initr 0.89tools for generating an initramfs ii module-init-tools3.3-pre11-4 tools for managing Linux kernel mo Versions of packages linux-image-2.6.22-1-686 recommends: ii libc6-i6862.6-4 GNU C Library: Shared libraries [i -- debconf information: linux-image-2.6.22-1-686/postinst/bootloader-error-2.6.22-1-686: shared/kernel-image/really-run-bootloader: true linux-image-2.6.22-1-686/postinst/depmod-error-2.6.22-1-686: false linux-image-2.6.22-1-686/preinst/failed-to-move-modules-2.6.22-1-686: linux-image-2.6.22-1-686/preinst/abort-install-2.6.22-1-686: linux-image-2.6.22-1-686/postinst/create-kimage-link-2.6.22-1-686: true linux-image-2.6.22-1-686/prerm/would-invalidate-boot-loader-2.6.22-1-686: true linux-image-2.6.22-1-686/preinst/elilo-initrd-2.6.22-1-686: true linux-image-2.6.22-1-686/postinst/old-initrd-link-2.6.22-1-686: true linux-image-2.6.22-1-686/postinst/depmod-error-initrd-2.6.22-1-686: false linux-image-2.6.22-1-686/preinst/initrd-2.6.22-1-686: linux-image-2.6.22-1-686/preinst/bootloader-initrd-2.6.22-1-686: true linux-image-2.6.22-1-686/postinst/old-system-map-link-2.6.22-1-686: true linux-image-2.6.22-1-686/preinst/lilo-initrd-2.6.22-1-686: true linux-image-2.6.22-1-686/preinst/lilo-has-ramdisk: linux-image-2.6.22-1-686/preinst/overwriting-modules-2.6.22-1-686: true linux-image-2.6.22-1-686/postinst/kimage-is-a-directory: linux-image-2.6.22-1-686/postinst/old-dir-initrd-link-2.6.22-1-686: true linux-image-2.6.22-1-686/prerm/removing-running-kernel-2.6.22-1-686: true linux-image-2.6.22-1-686/postinst/bootloader-test-error-2.6.22-1-686: linux-image-2.6.22-1-686/preinst/abort-overwrite-2.6.22-1-686: linux-image-2.6.22-1-686/preinst/already-running-this-2.6.22-1-686: -- X server log: X Window System Version 1.3.0 Release Date: 19 April 2007 X Protocol Version 11, Revision 0, Release 1.3 Build Operating System: Linux Debian Current Operating System: Linux boheme 2.6.21-2-686 #1 SMP Wed Jul 11 03:53:02 UTC 2007 i686 Build Date: 14 July 2007 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/Xorg.0.log, Time: Mon Jul 30 11:12:00 2007 (EE) Unable to locate/open config file (II) Loader magic: 0x81e50c0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 1.2 X.Org XInput driver : 0.7 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: pcidata (II) Loading /usr/lib/xorg/modules//libpcidata.so (II) Module pcidata: vendor=X.Org Foundation compiled for 1.3.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.2 (++) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1002,5a31 card 1179,ff00 rev 01 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 1002,5a3f card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:04:0: chip 1002,5a36 card , rev 00 class 06,04,00 hdr 01 (II) PCI: 00:13:0: chip 1002,4374 card 1179,ff00 rev 80 class 0c,03,10 hdr 80 (II) PCI: 00:13:1: chip 1002,4375 card 1179,ff00 rev 80 class 0c,03,10 hdr 00 (II) PCI: 00:13:2: chip 1002,4373 card 1179,ff00 rev 80 class 0c,03,20 hdr 00 (II) PCI: 00:14:0: chip 1002,4372 card 1179,ff00 rev 81 class 0c,05,00 hdr 80 (II) PCI: 00:14:1: chip 1002,4376 card 1179,ff00 rev 80 class 01,01,8a hdr 00 (II) PCI: 00:14:3: chip 1002,4377 card 1179,ff00 rev 80 class 06,01,00 hdr 80 (II) PCI: 00:14:4: chip 1002,4371 card , rev 80 class 06,04,01 hdr 81 (II) PCI: 00:14:5: chip 1002,4370 card 1179,ff00 rev 80 class 04,01,00 hdr 80 (II) PCI: 00:14:6: chip 1002,4378 card 1179,0001 rev 80 class 07,03,00 hdr 80 (II) PCI: 01:05:0: chip 1002,5a62 card 1179,ff01 rev 00 class 03,00,00 hdr 00 (II) PCI: 04:00:0: chip 104c,8026 card 1179,ff00 rev 00 class 0c,00,10 hdr 00 (II) PCI: 04:02:0: chip 168c,001a card 144f,7094
Processed: reassign 435268 to yaird
Processing commands for [EMAIL PROTECTED]: # Automatically generated email from bts, devscripts version 2.10.6 reassign 435268 yaird Bug#435268: linux-image-2.6.22-1-k7: Thelatest package of the image cannot be installed Bug reassigned from package `linux-image-2.6.22-1-k7' to `yaird'. End of message, stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
yaird support/bugreports against linux-2.6
Maybe you could take a look for reportbug script code example from glibc. They added script for preventing bogus bug reports against their package. Could same be added to kernel package telling it's bug in yaird and not in kernel? In my opinion you should keep support for alternate initrd generators. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#433236: Subject: linux-image-2.6.21-2-powerpc: radeonfb broken with Apple Cinema Display, connected via DVI
Bonjour Ben, merci pour le suivit. Benjamin Herrenschmidt a écrit : Does this happen also without radeonfb and with X alone using the X radeon driver ? Yes, unless I misunderstand you. I tried several options at the yaboot prompt (nofb or video=of), and speaking of Xorg, I don't use the UseFBDev for X11 since it rarely works with LCD panels (same with the Apple 20 and the Samsung 206, most of the valid resolutions don't work with UseFBDev). Here are my device and monitor sections of xorg.conf: Section Device Identifier ATI Technologies, Inc. RV280 [Radeon 9200] Driver radeon BusID PCI:0:16:0 Option UseFBDev false Option AGPMode 4 Option AGPFastWrite true Option ReverseDDCtrue Option PanelSize 1680x1050 Option AccelMethod XAA Option AccelDFS on Option EnablePageFliptrue Option ColorTiling on Option EnableDepthMoves true Option RenderAccel true Option DRI true Option XAANoOffscreenPixmaps true EndSection Section Monitor Identifier Apple Cinema Display 20 Option MonitorLayout TMDS,NONE Option DPMS HorizSync 28-68 VertRefresh 60 DisplaySize 434 270 Option DPMS ModeLine 1680x1050 119.06 1680 1728 1760 1840 1050 1053 1059 1080 +HSync -VSync Modeline 1280x800 67.26 1280 1312 1560 1592 800 817 824 841 Modeline 1024x640 51.90 1024 1056 1248 1280 640 653 660 673 Modeline 800x500 30.98 800 832 944 976 500 510 515 526 EndSection Tell me if I can do something else to help. -- Stéphane Louise mailto:[EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#435249: closed by maximilian attems [EMAIL PROTECTED] (Re: Bug#435249: linux-image-2.6.21-2-k7: unbootable kernel)
Hi again On Mon, Jul 30, 2007 at 02:00:03PM +, Debian Bug Tracking System wrote: please post the output of cat /etc/kernel-img.conf $ cat /etc/kernel-img.conf # Do not create symbolic links in / Do_Symlinks = Yes as expected no line with do_bootloader = yes Current state is: $ cat /etc/kernel-img.conf do_symlinks = Yes do_bootloader = Yes do_initrd = Yes and aptitude install linux-image-2.6.21-2-k7 still doesn't: - call lilo - very dangerous!! - make symlinks in / (only in /boot - I can libe with it) I sure that problem is in postinst script, I got an expectet result with postinst form 2.6.18-4-k7_2.6.18.dfsg.1-12etch2 (I've changed $version inside): dpkg --unpack linux-image-2.6.21-2-k7_2.6.21-6_i386.deb ./postinst-faked configure Mirek -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#433236: Subject: linux-image-2.6.21-2-powerpc: radeonfb broken with Apple Cinema Display, connected via DVI
On Mon, 2007-07-30 at 20:41 +0200, Stephane Louise wrote: Bonjour Ben, merci pour le suivit. Benjamin Herrenschmidt a écrit : Does this happen also without radeonfb and with X alone using the X radeon driver ? Yes, unless I misunderstand you. I tried several options at the yaboot prompt (nofb or video=of), and speaking of Xorg, I don't use the UseFBDev for X11 since it rarely works with LCD panels (same with the Apple 20 and the Samsung 206, most of the valid resolutions don't work with UseFBDev). Just to make sure I understand properly: with video=ofonly and X with the config below, you still get a black screen ? It looks like the monitor powers off right ? I saw that with issues with Apple doing non-kosher things with the DDC line but we had that fixed long ago... Ben. Here are my device and monitor sections of xorg.conf: Section Device Identifier ATI Technologies, Inc. RV280 [Radeon 9200] Driver radeon BusID PCI:0:16:0 Option UseFBDev false Option AGPMode 4 Option AGPFastWrite true Option ReverseDDCtrue Option PanelSize 1680x1050 Option AccelMethod XAA Option AccelDFS on Option EnablePageFliptrue Option ColorTiling on Option EnableDepthMoves true Option RenderAccel true Option DRI true Option XAANoOffscreenPixmaps true EndSection Section Monitor Identifier Apple Cinema Display 20 Option MonitorLayout TMDS,NONE Option DPMS HorizSync 28-68 VertRefresh 60 DisplaySize 434 270 Option DPMS ModeLine 1680x1050 119.06 1680 1728 1760 1840 1050 1053 1059 1080 +HSync -VSync Modeline 1280x800 67.26 1280 1312 1560 1592 800 817 824 841 Modeline 1024x640 51.90 1024 1056 1248 1280 640 653 660 673 Modeline 800x500 30.98 800 832 944 976 500 510 515 526 EndSection Tell me if I can do something else to help.
Processed: [bts-link] source package linux-2.6
Processing commands for [EMAIL PROTECTED]: # # bts-link upstream status pull for source package linux-2.6 # see http://lists.debian.org/debian-devel-announce/2006/05/msg1.html # user [EMAIL PROTECTED] Setting user to [EMAIL PROTECTED] (was [EMAIL PROTECTED]). # remote status report for #433640 # * http://bugzilla.kernel.org/show_bug.cgi?id=8825 # * remote status changed: (?) - REJECTED # * remote resolution changed: (?) - INVALID # * closed upstream tags 433640 + fixed-upstream Bug#433640: linux-image-2.6.22-1-amd64: time runs too slow Tags were: moreinfo Tags added: fixed-upstream usertags 433640 + status-REJECTED resolution-INVALID Bug#433640: linux-image-2.6.22-1-amd64: time runs too slow There were no usertags set. Usertags are now: resolution-INVALID status-REJECTED. # remote status report for #433750 # * http://bugzilla.kernel.org/show_bug.cgi?id=8794 # * remote status changed: (?) - NEW usertags 433750 + status-NEW Bug#433750: linux-image-2.6.22-1-686: UMTS card stopped working There were no usertags set. Usertags are now: status-NEW. # remote status report for #435062 # * http://bugzilla.kernel.org/show_bug.cgi?id=8828 # * remote status changed: (?) - NEW usertags 435062 + status-NEW Bug#435062: linux-image-2.6.22-1-k7: nforce2 firewire unsupported in new stack, please enable old fw stack There were no usertags set. Usertags are now: status-NEW. thanks Stopping processing here. Please contact me if you need assistance. Debian bug tracking system administrator (administrator, Debian Bugs database) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#421816: status?
Hello, what is the status of this ITP? OpenAIS is a required component for the new upstream version of the redhat cluster suite. We would like to update rh-cluster ASAP as the current version does not work with kernels newer than 2.6.20, and for this we want to have the maintainership of all concerned packages in the kernel team. So, please hand the package over. Thanks in advice Frederik Schüler -- ENOSIG signature.asc Description: Digital signature
[bts-link] source package linux-2.6
# # bts-link upstream status pull for source package linux-2.6 # see http://lists.debian.org/debian-devel-announce/2006/05/msg1.html # user [EMAIL PROTECTED] # remote status report for #433640 # * http://bugzilla.kernel.org/show_bug.cgi?id=8825 # * remote status changed: (?) - REJECTED # * remote resolution changed: (?) - INVALID # * closed upstream tags 433640 + fixed-upstream usertags 433640 + status-REJECTED resolution-INVALID # remote status report for #433750 # * http://bugzilla.kernel.org/show_bug.cgi?id=8794 # * remote status changed: (?) - NEW usertags 433750 + status-NEW # remote status report for #435062 # * http://bugzilla.kernel.org/show_bug.cgi?id=8828 # * remote status changed: (?) - NEW usertags 435062 + status-NEW thanks
Debian Installer Status Update - 30th July 2007
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 First we'd like to say thank you to Frans Pop by his work as Debian Installer Release Manager and we (Jeremy, Joey and Otavio) are starting to work as a team to manage the next Debian Installer release. It won't be an easy task and we'll do mistakes, for sure, but we're very commited to get it done. Bear on mind that we're intending to have a team-like coordination of the Debian Installer release process and that means you're free to collaborate to it. Please report any issue you have experienced and that's not reported here so we can keep the whole installer quality as good as we can. Just in case you wonder, we hope to make a beta1 release on the end of September. :) New stuff - - * Transition from devfs style device name is now complete. * sparc32 is gone, and code has been cleaned up. Breakage in daily builds - * arm (ads_cf) had a build-failure due the lack of pcmcia-cs-udeb but it's now addressed and should be ok by tomorrow. * The installation problem due the missing symbols still exists in some architectures since the conflict between libc-dev and linux-libc-dev (IIUC) isn't resolved yet (#434040). * mips and mipsel builds are still broken. A possible solution has been identified and we are waiting for actions by the daily build maintainer. * weekly CD builds for sparc are broken. Other issues - * Chinese (and Japanese/Korean) texts issue in slang2 (#425835) is still there. * Regressions in cleaning old LVM partitions (#425829) unfixed as well. Kernel status - - * linux-modules-di-m68k-2.6 isn't uploaded due the lack of loop-aes and squashfs since linux-headers lack modules.lds files (#402061). * hppa has been switched to 2.6.21 but the kernel is currently affected by #431773, #427398, #433768 - all marked as pending. * sparc kernel seems to produces unkillable processes (#433187). Installation Images - --- * netinst images are huge due debian-cd inclusion of excluded packages dependencies (#410418). - -- Regards, Debian Installer Release Team -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Processed by Mailcrypt 3.5.8+ http://mailcrypt.sourceforge.net/ iD8DBQFGrl7yLqiZQEml+FURAlTmAJwJJ0VNqxR0MtxyIRczNy4BRB/ckwCgnj3B iJjYbVAn/9c9rH0OeJmQJz4= =/ThE -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
dkt - debian kernel toolkit
Hi folks Some of you already know that I'm working on something new. It is for named dkt, debian kernel toolkit[1]. It is a replacement for the maintainer script parts of kernel-package. But it can be extended to do much more. The features for a first release should be at least: - Support for linux, xen and xenolinux images. - Generic image sorting and selection like update-grub, but more configurable (see [2] for some preliminary examples). - Support for grub, lilo, zipl and yaboot. - fstab-rewriting (this is not part of the core implementation). - Support for initramfs-tools. The following things probably won't be supported: - symlink-farm in /boot. The design looks a little bit like Apache. The real functionality is loaded as modules and are glued together with a rather small core. Bastian [1]: http://multibuild.org/documentation/dkt [2]: http://multibuild.org/documentation/dkt/config/system-config -- Each kiss is as the first. -- Miramanee, Kirk's wife, The Paradise Syndrome, stardate 4842.6 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#435304: firmware-iwlwifi: new upstream version available
Package: firmware-iwlwifi Version: 0.6 Severity: wishlist Please package iwlwifi-3945-ucode version 2.14.1.5, which is required for the recent wireless-dev kernel. (They added a version suffix to the firmware file name.) -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.23-rc1-melech (SMP w/2 CPU cores; PREEMPT) Locale: LANG=sv_SE.UTF-8, LC_CTYPE=sv_SE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#435308: linux-image-2.6-amd64: kernel BUG at mm/rmap.c:522
Package: linux-image-2.6-amd64 Version: 2.6.18+6 Severity: normal Jul 26 09:21:45 localhost kernel: Kernel BUG at mm/rmap.c:522 Jul 26 09:21:45 localhost kernel: invalid opcode: [1] SMP Jul 26 09:21:45 localhost kernel: CPU 1 Jul 26 09:21:45 localhost kernel: Modules linked in: nls_iso8859_1 isofs udf ppdev lp button ac battery ip6table_filter ip6_tables iptable_raw xt_policy xt_multiport ipt_ULOG ipt_TTL ipt_ttl ipt_TOS ipt_tos ipt_TCPMSS ipt_SAME ipt_REJECT ipt_REDIRECT ipt_recent ipt_owner ipt_NETMAP ipt_MASQUERADE ipt_LOG ipt_iprange ipt_hashlimit ipt_ECN ipt_ecn ipt_DSCP ipt_dscp ipt_CLUSTERIP ipt_ah ipt_addrtype ip_nat_tftp ip_nat_snmp_basic ip_nat_pptp ip_nat_irc ip_nat_ftp ip_nat_amanda ip_conntrack_tftp ip_conntrack_pptp ip_conntrack_netbios_ns ip_conntrack_irc ip_conntrack_ftp ts_kmp ip_conntrack_amanda xt_tcpmss xt_pkttype xt_physdev bridge xt_NFQUEUE xt_MARK xt_mark xt_mac xt_limit xt_length xt_helper xt_dccp xt_conntrack xt_CONNMARK xt_connmark xt_CLASSIFY xt_tcpudp xt_state iptable_nat ip_nat ip_conntrack iptable_mangle nfnetlink iptable_filter ip_tables x_tables ipv6 dm_snapshot dm_mirror dm_mod it87 hwmon_vid i2c_isa eeprom sbp2 loop snd_hda_intel snd_hda_codec snd_pcm_oss snd_mixer_oss snd_pcm parport_pc snd_timer parp Jul 26 09:21:45 localhost kernel: rt snd soundcore snd_page_alloc psmouse serio_raw pcspkr i2c_nforce2 i2c_core joydev tsdev evdev eth1394 ext3 jbd mbcache ide_cd cdrom usbhid sd_mod amd74xx generic ide_core 8139cp ohci1394 8139too ieee1394 mii forcedeth ohci_hcd ehci_hcd sata_nv libata scsi_mod thermal processor fan Jul 26 09:21:45 localhost kernel: Pid: 24449, comm: floaters Not tainted 2.6.18-4-amd64 #1 Jul 26 09:21:45 localhost kernel: RIP: 0010:[8020aa18] [8020aa18] page_remove_rmap+0x13/0x2c Jul 26 09:21:45 localhost kernel: RSP: 0018:810071d0fc30 EFLAGS: 00010286 Jul 26 09:21:45 localhost kernel: RAX: RBX: 81007fbe1c40 RCX: 003f Jul 26 09:21:45 localhost kernel: RDX: 0001 RSI: 800072438067 RDI: 81007fbe1c40 Jul 26 09:21:45 localhost kernel: RBP: 72438020 R08: 77ef8020 R09: 8100c400 Jul 26 09:21:45 localhost kernel: R10: R11: 0246 R12: 00807000 Jul 26 09:21:45 localhost kernel: R13: 81002d05d038 R14: 8100010182a0 R15: 00a0 Jul 26 09:21:45 localhost kernel: FS: 2afebec84aa0() GS:81007e2aaac0() knlGS: Jul 26 09:21:45 localhost kernel: CS: 0010 DS: ES: CR0: 8005003b Jul 26 09:21:45 localhost kernel: CR2: 0051f960 CR3: 00201000 CR4: 06e0 Jul 26 09:21:45 localhost kernel: Process floaters (pid: 24449, threadinfo 810071d0e000, task 8100158b1080) Jul 26 09:21:45 localhost kernel: Stack: 80207a3f 810071d0fd08 Jul 26 09:21:45 localhost kernel: 810076994a28 810071d0fd10 Jul 26 09:21:45 localhost kernel: 00018024206a 00cc6000 810070bcb000 810029fc Jul 26 09:21:45 localhost kernel: Call Trace: Jul 26 09:21:45 localhost kernel: [80207a3f] unmap_vmas+0x3f4/0x713 Jul 26 09:21:45 localhost kernel: [80237c76] exit_mmap+0x76/0xf1 Jul 26 09:21:45 localhost kernel: [80239d2d] mmput+0x28/0x98 Jul 26 09:21:45 localhost kernel: [8021353d] do_exit+0x220/0x8ae Jul 26 09:21:45 localhost kernel: [8024534d] cpuset_exit+0x0/0x6c Jul 26 09:21:45 localhost kernel: [8022956f] get_signal_to_deliver+0x46e/0x49d Jul 26 09:21:45 localhost kernel: [80227fd6] do_signal+0x55/0x751 Jul 26 09:21:45 localhost kernel: [802b9e4d] do_readv_writev+0x271/0x294 Jul 26 09:21:45 localhost kernel: [8025cc4e] thread_return+0x0/0xe7 Jul 26 09:21:45 localhost kernel: [80258a98] retint_signal+0x3d/0x79 Jul 26 09:21:45 localhost kernel: Jul 26 09:21:45 localhost kernel: Jul 26 09:21:45 localhost kernel: Code: 0f 0b 68 3a a2 40 80 c2 0a 02 8b 77 18 83 f6 01 83 e6 01 e9 Jul 26 09:21:45 localhost kernel: RIP [8020aa18] page_remove_rmap+0x13/0x2c Jul 26 09:21:45 localhost kernel: RSP 810071d0fc30 Jul 26 09:21:45 localhost kernel: 1Fixing recursive fault but reboot is needed! Jul 26 09:23:17 localhost kernel: Bad page state in process 'Xvnc4' Jul 26 09:23:17 localhost kernel: page:81007fbe1c40 flags:0x0114 mapping: mapcount:-1 count:0 Jul 26 09:23:17 localhost kernel: Trying to fix it up, but a reboot is needed Jul 26 09:23:17 localhost kernel: Backtrace: Jul 26 09:23:17 localhost kernel: Jul 26 09:23:17 localhost kernel: Call Trace: Jul 26 09:23:17 localhost kernel: [802a7b0c] bad_page+0x4e/0x78 Jul 26 09:23:17 localhost kernel: [80209f65] get_page_from_freelist+0x26d/0x3a6 Jul 26 09:23:17 localhost kernel: [8020de4a] __alloc_pages+0x5c/0x2a9
Bug#435224: linux-image-2.6.22-1-k7: I/O errors when plugging external hd via Firewire 400
On Mon, Jul 30, 2007 at 10:22:38AM +0200, maximilian attems wrote: hmm interesting yeah they are due to the new firewire stack. it be interesting if you could test latest -rc1 + git7 if they are still reproducible there and if yes holler upstream. Thanks for the reply, Maks ! Should we leave the bug open then, until the next release, hoping it'll be fixed there ? Regards, Paulo -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]