Re: Interviews...
Joey Hess <[EMAIL PROTECTED]> writes: > I have been interested in interviews for debian so I could package up mxv, > a rather good sound editing program. I've never gotten mxv to compile, > though, but maybe I'd have more luck if I didn't have to compile the > interviews stuff on my own too. > > But a.out?! Is this a binary-only package, or something? The people who produced Interviews quit supporting it a while back (a few years ago). It's written in really gnarly C++, and g++-2.6.3 (and newer) won't compile it. Someone supposedly ported it to 2.7.0 - I had no luck when I messed with it, though. (I wasn't willing to put much time in it - I already had produced the package I posted about) Anyways, I took the BINARIES from the Slackware "iv" disks (version 2.0 of Slackware or something like ), wrote a couple of control files, and made a Debian package which I'm using quite successfully. If this would be of value to anyone, I'm willing to give you what I have. (But not support it full time or anything like that.) Later, Dale > -- > TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to > [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] > -- + finger for pgp public key -+ | Dale E. Martin | University of Cincinnati Savant Research Laboratory | | [EMAIL PROTECTED]| http://www.ececs.uc.edu/~dmartin | +--+ -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
back on list (I think)
Hi, Thanks for all who replied to my previous mail on the mailing list. I think I'm back on it now. Cross my fingers. I do not know whether I should post the following problems with my 1.2 debian from i-Connect CD here or should I file bug reports. Please let me know if I post these problems here incorrectly. 1. Texbin installation failed because Kpathsea could not convert some Metafont. There was a bug report on this but I could not find the resolution. This Texbin installation failure also caused the latex installation to failed. 2. Netscape could not be installed. 3. if gcc and w32gcc (from cygnus) were installed the same time, gcc could not find cc1. I uninstalled both and re-installed only gcc and it worked. 4. After installed the sendmail package, the bootup process took a long time (about 2-3 minutes long) at the 'sendmail' before the boot(or initialization)it can continue. 5. The initial installation did not create /dev/scd0, /dev/scd1 nor setup the symbolic link of the /dev/cdrom to /dev/scd0. Nor the /dev/sd[abc..]9 to /dev/sd[abc..]15. I have to create these manually. 6. the ifconfig in the /etc/rc???/network script were nowhere to be found. 7. All the X related libraries could not be located when running and X applications because the /etc/ldconfig.conf (I think that was the name of the file) did not include /usr/X11R6/lib. I added the entry in and run ldconfig, then the problem went away. 8. there seemed to be some font missing from the 'setfont' package. these font used to be in the slackware (sorry to complain). The font that I looked for were: '8x14alt', '8x14thin', '8x15', etc. I copy these font from the old slackware distribution. 9. BTW, is there a java1.0.2-???.deb out there? Thanks! -- Timothy C. Phan ([EMAIL PROTECTED]) NEC America, Inc. ASL 1525 Walnut Hill Ln. Irving, TX 75038 tel: (214)-518-3437 fax: (214)-518-3499 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: Interviews...
> Hello. When writing papers, I have always used "idraw" to make my > figures - I like it alot more than "xfig" for various reasons. > Anyways, Interviews has been largely unsupported for the last year or > two, so I took one of my trusty old Slackware CDs and made an > interviews package. Note that the binaries (and libraries) are a.out > - they're from an ANCIENT Slackware, as I said. Also, this package > doesn't really support the Linux Filesystem standard at all - same > reason as previously mentioned. > > I have no desire to do anything other than the most minimal support > for this package, but I was curious if anyone else would be interested > in it. If so, I will look into uploading it somewhere. I have been interested in interviews for debian so I could package up mxv, a rather good sound editing program. I've never gotten mxv to compile, though, but maybe I'd have more luck if I didn't have to compile the interviews stuff on my own too. But a.out?! Is this a binary-only package, or something? -- #!/usr/bin/perl -i\$q='$q',\$p='$p';eval\$q.\$\^I\n"# # [EMAIL PROTECTED] $q='print"$p$^I\n',$p='#!/usr/bin/perl -i';eval$q.$^I # Joey Hess "He. He. He." - - Herman Toothrot -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: sendmail && procmail troubles!
Hi I did a little mistake typing "using the 'bo' tree". Indeed, I used the Debian-1.2 tree, and after that, the bo tree. Okay, my system is hybrid, some 1.2 stuff and some 'pre 1.3'. Well, my problem persist. Even after downgrading to rex, using netbase_2.06-1.deb, netstd_2.08-1.deb, popclient_3.05-3.deb, procmail_3.10-4.deb and sendmail_8.7.6-2.deb, I can't get procmail filtering my mails anymore. Any hints? []s, mario Mario O.de Menezes - oo-O-oo- mailto:[EMAIL PROTECTED] | Nuclear and Energetic Research Institute - IPEN-CNEN/SP | | BRAZIL - fone (+55) 011-816.9175 fax (+55) 011-8l6.9188 | | http://tucano.ipen.br - http://www.ipen.br/~mario/mario.html | -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
System Time Question
The system time on my Debian PC is 1hour ahead of local time. That makes me think the timezone was not setup properly. What is the command for setting the time on a running system? Beyond that, what is the best method for setting up system time? Should I set CMOS time to GMT and use some sort of timezone info (which I don't know how to setup)? Or?? Thanks for the advise, John Roesch [EMAIL PROTECTED] -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
x startup error progress
I reinstalled the Debian xbase package. My error returned. I copied over the xrdb binary from the non-Debian build I made. The error went away. -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: wine dor Debian ?
> Is there a debian package of wine? Seems like I saw this question a > month or so ago & I thought I saved the response, but I can't put my > finger on it at the moment. Yes. You can find it under project/experimental. It isn't really useful yet and so isn't kept scrictly up-to-date with what is available. Brian ( [EMAIL PROTECTED] ) --- Generated by Signify v1.01. For this and more, visit http://www.verisim.com/ -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: kernel recompile
> From: Jean Pierre LeJacq <[EMAIL PROTECTED]> > To: Kevin Traas <[EMAIL PROTECTED]> > Subject: Re: kernel recompile > Date: Friday, January 03, 1997 5:53 AM > > > > On Thu, 2 Jan 1997, Kevin Traas wrote: > > > >> I just tried to recompile the 2.0.27 and everything seemed to go ok. I > > >> rebooted and got the following errors: > > >> > > >> Jan 2 14:47:04 timberwolf insmod: tty_register_ldisc: wrong version or > > >> undefined > > >> Jan 2 14:47:05 timberwolf insmod: dev_close: wrong version or undefined > > >> Jan 2 14:47:05 timberwolf insmod: dev_alloc_skb: wrong version or > > >> undefined > > > > > You need to update your modules. See /usr/src/linux/README. > > > > I'm having the *same* problem and I have followed the "make zImage" with > > "make modules" and "make modules_install". > > > > To provide further info: I only get the above messages if I enable "auto" > > in /etc/modules. If "auto" isn't enabled, then no messages. > > This seems to be a problem with your kernel configuration. Did you "make > config" first, select auto loading of modules and define the proper > drivers as modules? Yes. I actually ran "make menuconfig". I've since tried removing and reinstalling the kernel sources, but that hasn't helped either TIA for any further suggestions, Kevin Traas Systems Analyst Edmondson Roper Chartered Accountants http://users.uniserve.com/~erca Chilliwack, B.C. Pager: (604) 918-2054 Office: (604) 792-1915 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: developers (was Re: Interviews...)
"Brian S. Julin" <[EMAIL PROTECTED]> writes: > There should be a simple way for people to make available halfway > complete or "one shot" debian packages. (You can make developer > status necessary to get into the normal distribution directories > if you are worried about nobody wanting to sign on and just accumulating > tons of peicemeal packages, but the quick-and-dirty area should exist) I was under the impression that the "contrib" section was for things like this. I was just trying to see if there interest in this particular package, and if so, see what was necessary to put it there. > P.S. You could also use a note to consult the FAQ about being a developer > in the Incoming directory's README, and an ssh.README in the net > directory. > -- > Brian S. Julin > Thanks, Dale -- + finger for pgp public key -+ | Dale E. Martin | University of Cincinnati Savant Research Laboratory | | [EMAIL PROTECTED]| http://www.ececs.uc.edu/~dmartin | +--+ -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
can't load library "libXt.so.6"
I'm trying to install texbin (Debian 1.2 btw) and have run into the following error message: mf: can't load library "libXt.so.6" I've done some poking around and from Contents found that this file is included in xlib6. I've both tried reinstalling that package and verifying that the file is on my system (under /usr/X11R6/lib and /usr/X11R6/lib/i486-linuxaout) but the error stays I read somewhere that errors relating to this file might be fixed by installing xcompat. I've done this and I'm still having the error. I've since installed X and now I'm running into similar error messages when trying to run various applications (i.e. xosview: can't load library "libX11.so.6") Do you have any ideas on what might be my problem? TIA for your help, Kevin Traas Systems Analyst Edmondson Roper Chartered Accountants http://users.uniserve.com/~erca Chilliwack, B.C. Pager: (604) 918-2054 Office: (604) 792-1915 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: No ftp? Have I missed something?
> Um, how am I supposed to connect to the ftp site if I don't have ftp? Heck, > I don't have any inet capabilities except for ping! Maybe I missed > something in the documentation, but it appears that have a pretty useless > system installed here. Is there someplace I can look that will actually > tell me how to set Debian up? I swear, this is really annoying. I have > installed many complicated OS in my life, but this takes the cake :( Does > everyone go through this crap, or did I get defective files or something? > *sigh* If you got no ftp, that means you don't have the netstd package... which is in section net. You need netstd, and netbase... if memory serves. If you do have the binaries, and the setup isn't working... try reading the HOWTO for networking NET2-HOWTO. The basics are, that after you have the basic net tools... you need to configure the communications layer the network is to communicate through... PPP, SLIP for dial up or ethernet, tokenring, loopback or whatever communications services your net requires. To be able to see if your network is working, you should be able to use the loopback device to telnet or ftp your own machine... to do that, you need to register those services within your machine (as a server for those protocols), this is done in the /etc/inetd.conf file... the lines that do this are: #:STANDARD: These are standard services. ftp stream tcp nowait root/usr/sbin/in.ftpdftpd telnet stream tcp nowait root/usr/sbin/in.telnetd telnetd finger stream tcp nowait root/usr/sbin/in.fingerd fingerd #:BSD: Shell, login, exec and talk are BSD protocols. shell stream tcp nowait root/usr/sbin/in.rshdrshd execstream tcp nowait root/usr/sbin/in.rexecd rexecd login stream tcp nowait root/usr/sbin/in.rlogind rlogind ntalk dgram udp waitroot/usr/sbin/in.talkd talkd After you got the network working internally (loopback), you can prooceed with setting up other communications layers. -- Ørn Einar Hansen [EMAIL PROTECTED] [EMAIL PROTECTED] fax; +46 035 217194 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: rescue disks for a tecra
[Klippa, klapp, kluppit] > At http://www.cck.uni-kl.de/misc/tecra710/, Jens Maurer discusses the > problem and gives a kernel patch which works around it, a patch which > Bruce was going to incorporate it into the next set of boot disks. I > would try it myself as a service to other Tecra owners if I knew what > went into the boot disks (possible just the rescue disk). Can any of > the developers out there help? If it's a kernel patch, then all you have to do is recompile the kernel, mount the rescue floppy on /mnt, copy the resulting vmlinuz to /mnt/linux, and run /mnt/rdev.sh. Note: You might have to adjust your path if you are not doing this as root, because the /mnt/rdev.sh needs to find rdev. [Klippa, klapp, kluppit] > Kirk Hilliard Good luck, Martin S. -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
this mailing list
Hi, Anybody out there? I've not received any discussion/comment on this mailing for almost 1 month now. Has the list been up? BTW, if I'm no longer in this mailing list, how do I get on it. I've tried to subscribe this list again a week ago from www.debian.org but received no confirmation mail yet!? Thanks! -- Timothy C. Phan ([EMAIL PROTECTED]) NEC America, Inc. ASL 1525 Walnut Hill Ln. Irving, TX 75038 tel: (214)-518-3437 fax: (214)-518-3499 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
developers (was Re: Interviews...)
On Fri, 3 Jan 1997, Dale Martin wrote: > I have no desire to do anything other than the most minimal support > for this package, but I was curious if anyone else would be interested > in it. If so, I will look into uploading it somewhere. I am in a similar situation with the MCA Debian 1.2 rescue floppies. There is really no point in maintaining these as a package since the new 2.1 kernels are including support and most likely the next Debian won't need them. All I want is to upload them somewhere on the Debian site where people that want them can get them. This won't get done in the near future if the only way for me to do it is to go through the whole process of becoming a Debian developer and then orphaning the MCA rescue disks -- I can't spare the time. There should be a simple way for people to make available halfway complete or "one shot" debian packages. (You can make developer status necessary to get into the normal distribution directories if you are worried about nobody wanting to sign on and just accumulating tons of peicemeal packages, but the quick-and-dirty area should exist) P.S. You could also use a note to consult the FAQ about being a developer in the Incoming directory's README, and an ssh.README in the net directory. -- Brian S. Julin -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: ping reply without OS (was: Re: Unidentified subject!)
Most network cards are designed to releave as much load from the local processor as possible. Thus, by only knowing the local ip address. The card can forward packets down line, respond to pings, and do other housekeeping chores without bothering the local machine. So, as long as the card is not reset, it will continue to perform these tasks even when the OS has fully gone bye-bye. On Fri, 3 Jan 1997, Mario Olimpio de Menezes wrote: > > Hi, > > On Fri, 3 Jan 1997, Martin Stromberg wrote: > > > > > > > > ping response can be handled by network hardware without OS running. > > > > > > Uhhmmm... hadn't heard of this ever before. To reply to a ping request > > > the network card has to have an assigned IP address... > > > > > > -- > > > > > > Eloy A. Paris > > > Information Technology Department > > > Rockwell Automation de Venezuela > > > Telephone: +58-2-9432311 Fax: +58-2-9430323 > > > > Yes, but I've seen it quite often. The symptoms are you can't connect with > > anything, rlogin, telnet or such programs; however the machine gladly > > replies > > to ping. > > > > I experienced such situation when my nameserver was down for a > warm reboot, so that I couldn't telnet to it, but ping got response from > the machine during the reboot. I can't explain such situation, but it is > quite strange to me. > > []s, mario > >Mario O.de Menezes - oo-O-oo- mailto:[EMAIL PROTECTED] > | Nuclear and Energetic Research Institute - IPEN-CNEN/SP | > | BRAZIL - fone (+55) 011-816.9175 fax (+55) 011-8l6.9188 | > | http://tucano.ipen.br - http://www.ipen.br/~mario/mario.html | > > > -- > TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to > [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] > > > Dwarf -- aka Dale Scheetz Phone: 1 (904) 656-9769 Flexible Software 11000 McCrackin Road e-mail: [EMAIL PROTECTED] Tallahassee, FL 32308 If you don't see what you want, just ask -- -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: ping reply without OS (was: Re: Unidentified subject!)
Mario Olimpio de Menezes writes: > I experienced such situation when my nameserver was down for a > warm reboot, so that I couldn't telnet to it, but ping got response from > the machine during the reboot. I can't explain such situation, but it is > quite strange to me. Nothing strange about it. There's a thing called Address Resolution Protocol (arp), which maps IPs to MAC (network card) addresses. It makes TCP/IP work over your ethernet. Try this: # arp -a You'll see that you have a table mapping local IPs to MACs (the ethernet protocol doesn't understand IP addresses, only MAC ones). So, to send a datagram to your name server, you need its MAC address, which already was in your arp table. Now, the OS wasn't fully operational, some services (inetd) weren't available yet, but the kernel and the tcp layer were there, answering pings (which uses the ICMP protocol). -- Adriano -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: kernel compile fail
Hi, Do you have the packages libc5-dev, and, if you are on an intel box, bin86 as well? The missing stdio.h sounds ominous, though. manoj -- If you don't watch it, you're going to catch something. Manoj Srivastava mailto:[EMAIL PROTECTED]> Mobile, Alabama USAhttp://www.datasync.com/%7Esrivasta/> -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: select+paste does not work under X/Debian 1.2
Nathan L. Cutler wrote: > > On Fri, 3 Jan 1997, Zenon Fortuna wrote: > > > I would like to copy lines across opened xterm windows: to select a few > > lines with the left-button, then to go the another window and paste the > > selected text pressing the right button (or the left+right together). > > > > Why I cannot do it ? Hints ? > > It isn't the _right_ mouse button that is generally set to "paste", but > rather the _middle_ button. So, if you only have a two-button mouse (not > so good for X in any case), it must be set up to send the code for the > middle button when both buttons are pressed at once (the so-called "chord > click"). > > I'm not exactly certain how to set this up correctly in your case, since > I don't know what kind of mouse you have and what its capabilities are. > > --- > Nathan L. Cutler > Linux Enthusiast > http://www.cise.ufl.edu/~nlc If you have a two-button mouse and pressing the right and left buttons simultaneously doesn't not paste text for your xterm then you need X to emulate a 3-button mouse. To do this you must a few lines to your /etc/X11/XF86Config file in the "Pointer" section as follows: # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) Emulate3Buttons Emulate3Timeout50 That should do the trick. -- Jens B. Jorgensen [EMAIL PROTECTED] -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: Lilo
Franck LE GALL - STAGIAIRE A FT.CNET/LAB/FCI/PIH wrote: > > Hello, > > I've never heard about Lilo before and it seems to be something > useful. > What is it ? Where is it ? > > Thanks > Franck > If you have a debian system with the base packages then you have lilo (unless you opted against it in the install). Lilo is a boot loader which allows you to load Linux or just about any other operating systems selectively when your system starts up. If for some odd reason you don't have lilo it can be found at ftp://ftp.debian.org/debian/stable/binary-i386/base/lilo_19-1.deb (or whatever debian mirror is closest to you). First though you should 'dpkg --list lilo' to see whether or not you actually have it. If you do have it documentation can be found in /usr/doc/lilo. -- Jens B. Jorgensen [EMAIL PROTECTED] -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: Interviews...
Isn't interview being replaced by Fresco? I remember seeing a Fresco package for linux somewhere. On Fri, 3 Jan 1997, Dale Martin wrote: > Hello. When writing papers, I have always used "idraw" to make my > figures - I like it alot more than "xfig" for various reasons. > Anyways, Interviews has been largely unsupported for the last year or > two, so I took one of my trusty old Slackware CDs and made an > interviews package. Note that the binaries (and libraries) are a.out > - they're from an ANCIENT Slackware, as I said. Also, this package > doesn't really support the Linux Filesystem standard at all - same > reason as previously mentioned. > > I have no desire to do anything other than the most minimal support > for this package, but I was curious if anyone else would be interested > in it. If so, I will look into uploading it somewhere. > > Later, > Dale > > + finger for pgp public key -+ > | Dale E. Martin | University of Cincinnati Savant Research Laboratory | > | [EMAIL PROTECTED]| http://www.ececs.uc.edu/~dmartin | > +--+ > > > -- > TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to > [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED] > > -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: using fork in cgi & perl
Ricardo Kleemann wrote: > > Hi, > > I'm having a hard time getting fork to work correctly in a cgi script. > > Basically I have a time consuming process which I want to be done in the > background. > > I have something like this: > > unless (fork) { > > # print out result html page > exit 0; > } > > else { > > # do time-intensive stuff > } > > What's happening is that the child process executes (and becomes zombie) > and the parent process continues to chug along. The cgi result html only > comes up after the long process finishes... > > I've tried switching the parent & child to see if it makes a difference, > but it doesn't. In every case, the html output goes into zombie state, and > the result page is only displayed after the entire process is complete. > Almost as if the fork isn't working as intended... > > Any ideas? > > Thanks, > Ricardo > Well, the child is a zombie because the process which called fork did not wait() on the child process. This can be accomplished asynchronously by handling the SIGCHLD signal. The following (somewhat modified to remove unecessary SysV stuff) example comes from the perlipc manpage: sub REAPER { $waitedpid = wait; } $SIG{CHLD} = \&REAPER; # now do something that forks... That code will make sure the child doesn't sit there as a zombie. As for why the result doesn't come up quickly I can't speculate since I don't know what you're doing. -- Jens B. Jorgensen [EMAIL PROTECTED] -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: problem with suid perl scripts in Debian 1.2
Richard Kettlewell wrote: > > Christopher E. Stefan writes: > > >After upgrading from 1.1 to 1.2 none of my suid-perl scripts worked > >anymore. I ended up having to put C wrappers around all of them. > > I reported this as a bug a while back, don't recall the number. A bit > disappointing to see so little reaction. > > -- > Richard Kettlewell http://www.elmail.co.uk/staff/richard/ > Didn't someone already post some sort of dpkg bug in which suidperl is superceded by the regular perl or something? (Check the bug list.) -- Jens B. Jorgensen [EMAIL PROTECTED] -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: Lilo
> I've never heard about Lilo before and it seems to > be something useful. What is it ? Where is it ? A software that let's you boot many operating systems, and/or many versions of Linux kernels. It's installed with the boot disks, or as a standalone package (see it in .../base directory in your CD or at the FTP site). Do this: man lilo man lilo.conf Alexander Gieg =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= By: Alexander Gieg E-mail: [EMAIL PROTECTED] URL: http://www.geocities.com/TimesSquare/3222 IRC: AlexG =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Interviews...
Hello. When writing papers, I have always used "idraw" to make my figures - I like it alot more than "xfig" for various reasons. Anyways, Interviews has been largely unsupported for the last year or two, so I took one of my trusty old Slackware CDs and made an interviews package. Note that the binaries (and libraries) are a.out - they're from an ANCIENT Slackware, as I said. Also, this package doesn't really support the Linux Filesystem standard at all - same reason as previously mentioned. I have no desire to do anything other than the most minimal support for this package, but I was curious if anyone else would be interested in it. If so, I will look into uploading it somewhere. Later, Dale + finger for pgp public key -+ | Dale E. Martin | University of Cincinnati Savant Research Laboratory | | [EMAIL PROTECTED]| http://www.ececs.uc.edu/~dmartin | +--+ -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: ping reply without OS (was: Re: Unidentified subject!)
> Yes, but I've seen it quite often. The symptoms are you can't connect with > anything, rlogin, telnet or such programs; however the machine gladly replies > to ping. > > I think the situation arises when an OS _has_ been running on the machine > and then crashes or hangs; in this state the ethernet card has been assigned > an IP address, and then it just answers any ping requests that comes its way, > without any intervention of the OS. Well, I am not an expert but I think that in these cases where the OS crashes and one can still get ping responses from the dead box it is because the part of the kernel that handles ping request is still alive. I guess it is because this is a very low level task, not as telnet, rlogin and such programs that are at a very high level. What you all think? E.- -- Eloy A. Paris Information Technology Department Rockwell Automation de Venezuela Telephone: +58-2-9432311 Fax: +58-2-9430323 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
tecra 730
I tried to install my first Debian system on a Tecra 730 nootebook and failed booting from the rescue disk - by now I know this is a known problem. At the time, being in a hurry to get my new box up and running, I installed Slackware instead. Now the real question: Can I install Debian (from CD-ROM) on top of a Slackware installation (hopefully without destroying personalizations in initialization files (.xinitrc, XF86Cobfig, fvwmrc, ...) ? And how would I go about this (as an experienced Linux user, without any Debian exposure so far)? Thanks for any hints. -- -lauther Ulrich Lauther ph: +49 89 636 48834 fx: ... 636 42284 Siemens ZT AN 1 Internet: [EMAIL PROTECTED] -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
FTP problem when using dselect (fwd)
Victor still can't post to the list, and I'm really swamped at the moment. Could someone give him a hand? Thanks, Dwarf -- aka Dale Scheetz Phone: 1 (904) 656-9769 Flexible Software 11000 McCrackin Road e-mail: [EMAIL PROTECTED] Tallahassee, FL 32308 If you don't see what you want, just ask -- -- Forwarded message -- Date: Fri, 03 Jan 1997 07:28:58 -0500 From: Victor Torrico <[EMAIL PROTECTED]> To: Dale Scheetz <[EMAIL PROTECTED]> Subject: FTP problem when using dselect Hi Dale, Sorry to bother you but I still can't post to the list. Would you really be kind and post this to the list for me? Victor - Using dselect and its ftp worked OK for one download. I tried dselect ftp again and was unable to log on. Has anyone had this problem and been able to correct it? I have tried purging and reinstalling "dpkg-ftp" and "libnet". The messages I received follow: -- You must supply an ftp site, use of passive mode, username, password, path to the debian directory,list of distributions you are interested in and place to download the binary package files to (relative to /var/lib/dpkg/methods/ftp). Eg: ftp site: ftp.debian.org passive: y username: anonymous password: [EMAIL PROTECTED] ftp dir: /debian distributions: stable non-free contrib download dir: debian Enter ftp site [ftp.debian.org]: Use passive mode [y]: Enter username [anonymous]: If you're using anonymous ftp to retrieve files, enter your email address for use as a password. Otherwise enter "?" and dpkg-ftp will prompt you each time. Enter password [EMAIL PROTECTED]: Enter debian directory [/debian/Debian-1.2-fixed]: Note: order here is important. Package files are scanned in order so later distributions will override earlier ones. So put stable before unstable. Enter space seperated list of distributions to get [admin base]: Enter directory to download binary package files to (relative to /var/lib/dpkg/methods/ftp/) [debian]: Using FTP to check directories...(stop with ^C) Connecting to ftp.debian.org... Net::FTP: Bad hostname 'ftp.debian.org' at /usr/lib/perl5/Net/FTP.pm line 405 FTP ERROR query/setup script returned error exit status 1. Press RETURN to continue. -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: ping reply without OS (was: Re: Unidentified subject!)
Hi, On Fri, 3 Jan 1997, Martin Stromberg wrote: > > > > > ping response can be handled by network hardware without OS running. > > > > Uhhmmm... hadn't heard of this ever before. To reply to a ping request > > the network card has to have an assigned IP address... > > > > -- > > > > Eloy A. Paris > > Information Technology Department > > Rockwell Automation de Venezuela > > Telephone: +58-2-9432311 Fax: +58-2-9430323 > > Yes, but I've seen it quite often. The symptoms are you can't connect with > anything, rlogin, telnet or such programs; however the machine gladly replies > to ping. > I experienced such situation when my nameserver was down for a warm reboot, so that I couldn't telnet to it, but ping got response from the machine during the reboot. I can't explain such situation, but it is quite strange to me. []s, mario Mario O.de Menezes - oo-O-oo- mailto:[EMAIL PROTECTED] | Nuclear and Energetic Research Institute - IPEN-CNEN/SP | | BRAZIL - fone (+55) 011-816.9175 fax (+55) 011-8l6.9188 | | http://tucano.ipen.br - http://www.ipen.br/~mario/mario.html | -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: Lilo
On Fri, 3 Jan 1997, Franck LE GALL - STAGIAIRE A FT.CNET/LAB/FCI/PIH wrote: > I've never heard about Lilo before and it seems to be something useful. > What is it ? Where is it ? LILO - LInux LOader - Loads Linux from the hard disk without a floppy. This program will set up your hard disk to boot Linux. Theres a separate package lilo_.deb under the base directory. --- Jean Pierre -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
sendmail && procmail troubles!
Hi All, Happy new year to you! I did an upgrade of my Debian box, from 1.1 to 1.2, using the 'bo' tree. After that upgrade, procmail didn't filter my mails anymore. I guess that this is because the permissions of /var/spool/mail/$LOGNAME are 0600, with user and group "$LOGNAME.mail", resp. Ever time sendmail writes a new mail, it changes the permissions to 0600, so that procmail can't read the file. How can I fix this? I'm using popclient to retrieve mail from my server. It's working fine, after a reinstall it. I didn't ask to remove it. Thanks you! []s, mario Mario O.de Menezes - oo-O-oo- mailto:[EMAIL PROTECTED] | Nuclear and Energetic Research Institute - IPEN-CNEN/SP | | BRAZIL - fone (+55) 011-816.9175 fax (+55) 011-8l6.9188 | | http://tucano.ipen.br - http://www.ipen.br/~mario/mario.html | -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
ping reply without OS (was: Re: Unidentified subject!)
> > > ping response can be handled by network hardware without OS running. > > Uhhmmm... hadn't heard of this ever before. To reply to a ping request > the network card has to have an assigned IP address... > > -- > > Eloy A. Paris > Information Technology Department > Rockwell Automation de Venezuela > Telephone: +58-2-9432311 Fax: +58-2-9430323 Yes, but I've seen it quite often. The symptoms are you can't connect with anything, rlogin, telnet or such programs; however the machine gladly replies to ping. I think the situation arises when an OS _has_ been running on the machine and then crashes or hangs; in this state the ethernet card has been assigned an IP address, and then it just answers any ping requests that comes its way, without any intervention of the OS. ping 127.0.0.1, MartinS -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: Dayly maintenance time (was Re: Innd problem)
According to Pete Templin: > On Fri, 3 Jan 1997, Miquel van Smoorenburg wrote: > > > According to Eloy A. Paris: > > > Was the time of the maintenance script changed from 6:42 AM in 1.1 to > > > 3 AM in 1.2? > > Yes, it has been changed to 03:08. However that is the setting in the > > default > > crontab. If you upgrade a working installation, the crontab will not be > > adjusted. You'll have to do that yourself: that's basic system > > administration. > > I agree that it's basic system administration. I also feel that each of > us has the right to run daily "operations" scripts anytime we please. But > could those of us who do regularly upgrade working installations be > informed of this sort of change, if only in the interest of consistency? Wait a minute. I got 2 things confused here: 1. Daily maintenance was and is at 6:42 (probably; I don't maintain the cron package). 2. Daily maintenance for *news* takes places at 3:08 AM because it doesn't run from /etc/cron.daily but has it's own crontab. So, nothing has changed AFAIK. Sorry for the confusion. Mike. -- Miquel van | Cistron Internet Services --Alphen aan den Rijn. Smoorenburg,| mailto:[EMAIL PROTECTED] http://www.cistron.nl/ [EMAIL PROTECTED] | Our vision is to speed up time, eventually eliminating it. -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: Dayly maintenance time (was Re: Innd problem)
On Fri, 3 Jan 1997, Miquel van Smoorenburg wrote: > According to Eloy A. Paris: > > Was the time of the maintenance script changed from 6:42 AM in 1.1 to > > 3 AM in 1.2? > Yes, it has been changed to 03:08. However that is the setting in the default > crontab. If you upgrade a working installation, the crontab will not be > adjusted. You'll have to do that yourself: that's basic system administration. I agree that it's basic system administration. I also feel that each of us has the right to run daily "operations" scripts anytime we please. But could those of us who do regularly upgrade working installations be informed of this sort of change, if only in the interest of consistency? --Pete -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: Install questions
In article <[EMAIL PROTECTED]>, "Terrence M. Brannon" <[EMAIL PROTECTED]> wrote: > - install MBR on /dev/hda > - how do I uninstall it so I can load DOS again? > - how do I allow DOS to be booted from a LILO prompt? To re-install an MS-DOS MBR, boot DOS from a floppy and type 'fdisk /mbr'. Lilo can boot any partition you like; check it's man page. If you don't like the lilo interface, you may want to check the page in my .sig; Boot Control provides alternative MBRs that give an (IMHO) nicer user interface. Gertjan. -- Gertjan Klein <[EMAIL PROTECTED]> The Boot Control home page: http://www.xs4all.nl/~gklein/bcpage.html -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: Dayly maintenance time (was Re: Innd problem)
> If the 6:42 AM update time is a problem, just go into /etc/crontab and change > the time to whatever you feel is best... I know, I know. I just wanted to know if the default time was changed from 6:42 AM to 3 AM because I think it is a more reasonable time for a dayly maintenance (at 6:42 AM I already have users working.) I know I can change /etc/crontab to suit my needs but maybe the not-so- knowledgeable user won't. E.- -- Eloy A. Paris Information Technology Department Rockwell Automation de Venezuela Telephone: +58-2-9432311 Fax: +58-2-9430323 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Lilo
Hello, I've never heard about Lilo before and it seems to be something useful. What is it ? Where is it ? Thanks Franck -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: select+paste does not work under X/Debian 1.2
On Fri, 3 Jan 1997, Zenon Fortuna wrote: > I would like to copy lines across opened xterm windows: to select a few > lines with the left-button, then to go the another window and paste the > selected text pressing the right button (or the left+right together). > > Why I cannot do it ? Hints ? It isn't the _right_ mouse button that is generally set to "paste", but rather the _middle_ button. So, if you only have a two-button mouse (not so good for X in any case), it must be set up to send the code for the middle button when both buttons are pressed at once (the so-called "chord click"). I'm not exactly certain how to set this up correctly in your case, since I don't know what kind of mouse you have and what its capabilities are. --- Nathan L. Cutler Linux Enthusiast http://www.cise.ufl.edu/~nlc -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: Dayly maintenance time (was Re: Innd problem)
Hi Mike, > > Was the time of the maintenance script changed from 6:42 AM in 1.1 to > > 3 AM in 1.2? > > Yes, it has been changed to 03:08. However that is the setting in the default > crontab. If you upgrade a working installation, the crontab will not be > adjusted. You'll have to do that yourself: that's basic system administration. That's right, an upgrade of the cron package won't touch /etc/crontab unless one explicitly tells dpkg to go ahead and use the maintainer's version of this configuration file. In my case, when I upgrade from 1.1 to 1.2, I am going to background the dpkg process (Z option) and examine carefully the differences between the old and new configuration files of each package since I do not want to break things just for keeping the old files. Bye. E.- -- Eloy A. Paris Information Technology Department Rockwell Automation de Venezuela Telephone: +58-2-9432311 Fax: +58-2-9430323 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: rescue disks for a tecra
I must admit that only my second thought when I read Bruce's note was for his family's and his property's safety, my first being, "Oh no! There goes the new boot disks." The problem is that on Tecra 710/720/730 laptops (I don't know about the 500 series) lilo cannot load a bzImage. With the rescue disk, you get "Loading root.bin " and "Loading linux ", and then the laptop reboots and gives the "boot:" prompt again. Loadlin (version 1.6), however, does not have a problem with bzImages. It has been reported that the Tecra 710/720 BIOS upgrade (720V580.EXE of 12-06-96) fixes this. The Tecra 730 BIOS upgrade (730V530.EXE also of 12-06-96) does not. I contacted Toshiba about this, and the Technical representative that I spoke with was very friendly, but I have not heard back from them yet. The BIOS upgrades are available at http://www.toshiba.com/tais/csd/support/files/. At http://www.cck.uni-kl.de/misc/tecra710/, Jens Maurer discusses the problem and gives a kernel patch which works around it, a patch which Bruce was going to incorporate it into the next set of boot disks. I would try it myself as a service to other Tecra owners if I knew what went into the boot disks (possible just the rescue disk). Can any of the developers out there help? Debian 1.2 was going to be an initial installation on my machine, but due to the problem, I had to install 1.1 first and then upgrade. (PHT Linux Monthly CDs finally had a use!) I made a minimal installation from the 1.1 CD, but for the service of those who only have a 1.2 CD, I could test to see what the absolute minimum of 1.1 is necessary. Perhaps it is possible to use only the 1.1 floppies, and then use the 1.2 CD when dselect is first run. I doubt that it would be possible to use the 1.1 boot and root disks, and then substitute the 1.2 base disks, but I could try. Once you have a working system, you can make it bootable with the new bzImage via loadlin, but make sure that you use loadlin version 1.6 which is in the Debian 1.2 loadlin package, not loadlin version 1.5 which is in the /tools directory and can't handle bzImages at all (nothing to do with Tecras). (I have notified the loadlin maintainer about this, but he was not sure who maintained /tools, so he past the note on to Bruce. I notice that ftp.debian.org still has loadlin version 1.5.) The alternative to using loadlin, of course, is building a kernel with the patch. Richard G. Roberto <[EMAIL PROTECTED]> wrote: > The new kernel doesn't boot and the old kernel has been overwritten. > This was a 1.1 upgraded, so I don't even have an older working set > of 1.2 floppies. Richard, If you have a 710/720, I recommend the BIOS upgrade. If you have a 730, you need to boot your system somehow. If you could get a copy of the 1.1 boot and root disks, you could mount your system and then grab your new kernel for use with loadlin. Unfortunately, buzz seems to have disappeared from ftp.debian.org. Alternatively, I could send you a vmlinuz and loadlin.exe (657183 and 32208 bytes). Can you uudecode? If not, what other options are there for email binary transfer? I could try to get a minimal web site up tonight as an alternative. I don't have access to outgoing ftp, but a link to a binary should be downloadable over the web. Kirk Hilliard -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: Dayly maintenance time (was Re: Innd problem)
According to Eloy A. Paris: > > It means exactly what it says. Every day (by default at 3:00 AM) the > > maintenance script "news.daily" has to run. This probably hasn't happened > > for some reason or the other since a couple of days. > > > > If you fix that, the system will stop sending you mail about it.. > > I am waiting for my I-Connect Debian 1.2 CD ROM that was already shipped so > probably I'll know the answer when I upgrade from 1.1... but in the meanwhile: > > Was the time of the maintenance script changed from 6:42 AM in 1.1 to > 3 AM in 1.2? > > If this was the case I am glad because 3 AM is a more reasonable time for > a dayly maintenance script that 6:42 AM. Yes, it has been changed to 03:08. However that is the setting in the default crontab. If you upgrade a working installation, the crontab will not be adjusted. You'll have to do that yourself: that's basic system administration. Mike. -- Miquel van | Cistron Internet Services --Alphen aan den Rijn. Smoorenburg,| mailto:[EMAIL PROTECTED] http://www.cistron.nl/ [EMAIL PROTECTED] | Our vision is to speed up time, eventually eliminating it. -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
select+paste does not work under X/Debian 1.2
Maybe it is a question specific more to "X" in general, but I believe it has something to do with a *default* configuration obtained during the Debian 1.2 installation: I would like to copy lines across opened xterm windows: to select a few lines with the left-button, then to go the another window and paste the selected text pressing the right button (or the left+right together). Why I cannot do it ? Hints ? TIA, Zenon -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: kernel make deb fails
[moved to debian-user@lists.debian.org; you were using debian-changes!] Fundamental writes: > I have installed the kernel source, and when i get to teh stage where i > should make deb ; make clean i get the following error, > > [EMAIL PROTECTED] [/usr/src/linux]: make deb > make: *** No rule to make target `deb'. Stop. > [EMAIL PROTECTED] [/usr/src/linux]: > > what have i missed? It should say 'make dep' (for dependencies), not 'make deb'. HTH, Ray -- J.H.M. Dassen | RUMOUR Believe all you hear. Your world may [EMAIL PROTECTED] | not be a better one than the one the blocks | live in but it'll be a sight more vivid. | - The Hipcrime Vocab by Chad C. Mulligan -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
rescue disks for a tecra
Does anybody know where I can get these? Bruce mentioned a bug in the exisisting set, but didn't mention what the bug was. He's off line for a while, so if anyone else could point me in the direction of a working set of boot disks for a tecra for 1.2, I'd appreciate it. I used make-kpkg to install a new custom kernel-image, but it was the same upstream version, so it blew away the previous working kernel (i.e. they were both 2.0.24, but had different package versions a la 2.0.24-1.1 and 1.2). The new kernel doesn't boot and the old kernel has been overwritten. This was a 1.1 upgraded, so I don't even have an older working set of 1.2 floppies. Any help would be appreciated as I'm quite hosed at the moment :-) Thanks in advance. Richard G. Roberto [EMAIL PROTECTED] 011-81-3-3437-7967 - Tokyo, Japan -- *** Bear Stearns is not responsible for any recommendation, solicitation, offer or agreement or any information about any transaction, customer account or account activity contained in this communication. *** -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
KBackup
I mentioned to someone a while back that KBackup was a very nice program that I used to use when the system was using Slackware but a Debian package of it did not seem to be available. After doing some looking around, I see that it is Shareware and that might account for its absence from Debian. After looking at Karsten's home page, however, I noted that he is willing to put it under GPL if he can find a good maintainer for the program. (see http://www.uni-karlsruhe.de/~Karsten.Ballueder/news ) I do not have the resources to maintain this program but I would like to mention it here so that possibly someone that does will have a look at it and possibly "debianize" the thing. It is a VERY nice backup program (requires expect as I recall). Does seem to have a small problem with multi-volume zip drive backups but it always worked fine with me with floppies. It also supports tape devices. What I like about it is that unlike tar.gz, an error does not cause you to loose the whole archive. A patch is in the works for the zip drive problem. The user interface was very nice, as I recall, and easy to operate. -- George Bonser [EMAIL PROTECTED], [EMAIL PROTECTED] -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: kernel compile fail
On Thu, 2 Jan 1997, Prashanth Mundkur wrote: this is it exactly, thanks mundkur >You need to install the libc5dev package, which has the requisite header mundkur >files. mundkur > mundkur >--prashanth mundkur > mundkur > mundkur > mundkur > Peace michael Pilgram: "God, can you be merciful and send me off to hell and lock me in forever?" God: "Pilgram, I will not send you there, but if you chose to go there, I could never lock you out." The Singer -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: where is base deb?
> If you are doing an upgrade from 1.1 to 1.2, don't force-remove the > base package even it is marked obsolete. The package still own files > that the system need. Does Debian offer a systematic way to get ride > of obsolete packages? I have force removed the base and install the base-file and base-password, though. -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Warning on non-existant virtual console
Hello all. I now run both of my Linux boxes in runlevel 4 by default, so that I don't use up excess getty's on the virtual consoles (runlevel 4 only provides one console). I just took a look at Alt-F2 and saw this message: Warning: dev (04:c2) tty->count(1) != #fd's(2) in do_tty_hangup There's no login prompt there, which is correct. I don't think I have reason to worry about this, but perhaps it indicates a problem somewhere. --Pete ___ Peter J. Templin, Jr. Client Services Analyst Computer & Communication Services tel: (717) 524-1590 Bucknell University [EMAIL PROTECTED] -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: kernel compile fail
On Fri, 3 Jan 1997, Fundamental wrote: > > Opps, your quite right:) but, when i did a make dep i get the folowing > > make dep > gcc -I/usr/src/linux/include -O2 -fomit-frame-pointer -o scripts/mkdep > scripts/m > kdep.c > scripts/mkdep.c:1: stdio.h: No such file or directory > [..] You need to install the libc5dev package, which has the requisite header files. --prashanth -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: limiting email size
On Fri, 3 Jan 1997, Karl Ferguson wrote: karl >Sure does - here's what happened while in the bounce while I was experimenting: karl > karl > - Transcript of session follows - karl >... while talking to mail.tower.net.au.: karl MAIL From:<[EMAIL PROTECTED]> SIZE=2925297 karl ><<< 552 message too large karl >554 [EMAIL PROTECTED] Service unavailable karl > karl >I guess this is a good-a indication as any. karl > karl >Regards, karl > Thanks - thats a big file you sent:) The second rate soldier lives a life of medoicrety and dies with regret. The first rate soldier lives a life of honor and dies with honor. -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
kernel compile fail
On Thu, 2 Jan 1997, Ngo Bach Long wrote: dragon >>what have i missed? dragon >> dragon > dragon >I think it's supposed to be "make dep" (as in "dependencies"), dragon >not "make deb". Opps, your quite right:) but, when i did a make dep i get the folowing make dep gcc -I/usr/src/linux/include -O2 -fomit-frame-pointer -o scripts/mkdep scripts/m kdep.c scripts/mkdep.c:1: stdio.h: No such file or directory scripts/mkdep.c:2: stdlib.h: No such file or directory scripts/mkdep.c:4: string.h: No such file or directory scripts/mkdep.c:5: sys/types.h: No such file or directory scripts/mkdep.c:6: sys/stat.h: No such file or directory scripts/mkdep.c:7: unistd.h: No such file or directory scripts/mkdep.c:8: sys/fcntl.h: No such file or directory scripts/mkdep.c:9: sys/mman.h: No such file or directory make: *** [scripts/mkdep] Error 1 Peace michael A well adjusted person is one who makes the same mistake twice without getting nervous. -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: Building a.out binaries
> Do you have /usr/i486-linuxaout/bin in your path before /usr/bin? Yes. ... Stephen -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: No ftp? Have I missed something?
On Thu, 2 Jan 1997, Kendrick Myatt wrote: > Um, how am I supposed to connect to the ftp site if I don't have ftp? Heck, > I don't have any inet capabilities except for ping! Maybe I missed > something in the documentation, but it appears that have a pretty useless > system installed here. Is there someplace I can look that will actually > tell me how to set Debian up? I swear, this is really annoying. I have > installed many complicated OS in my life, but this takes the cake :( Does > everyone go through this crap, or did I get defective files or something? > *sigh* If you did not get the ftp binary, then you did not get a complete base system. It's included. Is your path okay? I think ftp should be in /usr/bin. Syrus. -- Syrus Nemat-Nasser <[EMAIL PROTECTED]>UCSD Physics Dept. -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: No ftp? Have I missed something?
> Um, how am I supposed to connect to the ftp site if I don't have ftp? Heck, > I don't have any inet capabilities except for ping! Maybe I missed > something in the documentation, but it appears that have a pretty useless > system installed here. Is there someplace I can look that will actually > tell me how to set Debian up? I swear, this is really annoying. I have > installed many complicated OS in my life, but this takes the cake :( Does > everyone go through this crap, or did I get defective files or something? > *sigh* What do you mean? If you can ping any host in the Internet then you have anything you want (FTP, Telnet, News, WWW, etc.) - unless you are behind a firewall or something. Any way, what's the specific problem? E.- -- Eloy A. Paris Information Technology Department Rockwell Automation de Venezuela Telephone: +58-2-9432311 Fax: +58-2-9430323 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: where is base deb?
> "Dale" == Dale Scheetz <[EMAIL PROTECTED]> writes: Dale> On Thu, 2 Jan 1997, Lawrence Chim wrote: >> Curiously, the base.deb is missing in the binary-i386/base dir. >> Where is it? It's used to be in binary-i386/base dir. Does it >> moved to a new place. >> Dale> The base package has been replaced by base-files and Dale> base-passwd. If you are doing an upgrade from 1.1 to 1.2, don't force-remove the base package even it is marked obsolete. The package still own files that the system need. Does Debian offer a systematic way to get ride of obsolete packages? -- Billy C.-M. Chow <[EMAIL PROTECTED]> Department of Systems Engineering The Chinese University of Hong Kong -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: Building a.out binaries
Do you have /usr/i486-linuxaout/bin in your path before /usr/bin? Tim -- (work) [EMAIL PROTECTED] / (home) [EMAIL PROTECTED] - http://www.buoy.com/~tps "Paranoia is a survival mechanism." -- Anon ** Disclaimer: My views/comments/beliefs, as strange as they are, are my own.** -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: problem with suid perl scripts in Debian 1.2
Christopher E. Stefan writes: >After upgrading from 1.1 to 1.2 none of my suid-perl scripts worked >anymore. I ended up having to put C wrappers around all of them. I reported this as a bug a while back, don't recall the number. A bit disappointing to see so little reaction. -- Richard Kettlewell http://www.elmail.co.uk/staff/richard/ -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: where is base deb?
Dale Scheetz wrote: > > On Thu, 2 Jan 1997, Lawrence Chim wrote: > > > Curiously, the base.deb is missing in the binary-i386/base dir. > > Where is it? It's used to be in binary-i386/base dir. > > Does it moved to a new place. > > > The base package has been replaced by base-files and base-passwd. > So, how to remove the base from my system. I can't remove it as it is a required package. -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
No ftp? Have I missed something?
Um, how am I supposed to connect to the ftp site if I don't have ftp? Heck, I don't have any inet capabilities except for ping! Maybe I missed something in the documentation, but it appears that have a pretty useless system installed here. Is there someplace I can look that will actually tell me how to set Debian up? I swear, this is really annoying. I have installed many complicated OS in my life, but this takes the cake :( Does everyone go through this crap, or did I get defective files or something? *sigh* -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: [1.2 installation]: how to tell X to follow swapping of control and caps lock from loadkeys
> > > What's the best way to swap the Caps Lock and left > > > Control keys under X windows? > > > > It's right in the man page for xmodmap: > Absolutely correct... remove lock = Caps_Lock remove control = Control_L keysym Caps_Lock = Control_L keysym Control_L = Caps_Lock add lock = Caps_Lock add control = Control_L Put those lines into a file, and then run 'xmodmap [file]' and the Control_Left and Caps_Lock keys change places. With or without the extension. > In X Windows 3.1.2 this will work fine, but in 3.2 > you will need to disable the new XKBD extensions and > use the old xmodmap method. > Doesn't mean that xmodmap doesn't work... > The XKBD has only one problem: its very, very, *very* > more complex than xmodmap. There isn't any HOWTO > (yet, I hope), so I'm reading the full documentation > ( > 300 pages!). > > I think there is an easy solution to these problems. > Why simple things like writing are so complicated? > The extension has been around, for some time... the SGI has a "setxkeyboard" command to load a '.xkm' file, as an example. But this is an extension and doesn't replace the older methods of mapping the keyboard... -- Ørn Einar Hansen [EMAIL PROTECTED] [EMAIL PROTECTED] fax; +46 035 217194 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: Newbie X-WIndows Installation questions
> "Miller" == Eamiller <[EMAIL PROTECTED]> writes: Miller> I am brand new to the Linux operating system, and have Miller> been trying to install XFree86 on my system. My first Miller> question is, should I get 3.2 from Xfree86.org, or is Miller> there a specific Debian package that I can use? Next, do Miller> I download the aout files, or the elf files? I have tried Miller> both with no success. When I undo all of the required Miller> files I get various errors when I try to run XF86Setup. Miller> Anything from missing library files to a missing card Miller> file. I really need more detailed info then XFree86 gives Miller> me. Do I untar the files in the root directory, or the Miller> /usr/X11R6 directory that I create myself. Right now I am Miller> totally lost, and desperately seeking help. I would recommend getting a full Debian distribution (1.2 is the current stable one). Then, run 'dselect' to choose which packages you want on your system. If 'dselect' has found the distribution correctly, it will offer you a rich variety of packages to choose from. There's a whole section for X11. As a minimum, you'll need xbase, xfntbase, and an X server or two (xserver-vga16 and one for your particular video card). That should allow you to get X running, then you can install more X packages as you see fit. If you're a newbie, don't worry too much about which version of X you're getting. Get whichever version comes with the particular distribution you are installing. Most likely it will be 3.1.2 -- so be it. It's a tried and true X system and you're much less likely to have problems with it than if you get the newest version at any cost. Also, many many more people can help you with 3.1.2 than with 3.2, since 3.2 is extremely new. Let the experts get used to it first, and then do what they do. Hope this helps. If it doesn't, feel free to send me a personal mail. -- Nathan L. Cutler Linux Enthusiast http://www.cise.ufl.edu/~nlc -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: [1.2 installation]: how to tell X to follow swapping of control and caps lock from loadkeys
On Thu, 2 Jan 1997, Alexander Gieg wrote: > > > What's the best way to swap the Caps Lock and left > > > Control keys under X windows? > > > > It's right in the man page for xmodmap: > > In X Windows 3.1.2 this will work fine, but in 3.2 > you will need to disable the new XKBD extensions and > use the old xmodmap method. I'm running 3.2, and xmodmap works for me. I guess I'm not using XKBD. ...RickM... -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: Corrupted superblock on msdog partition
> "Tom" == <[EMAIL PROTECTED]> writes: Tom> Nathan L. Cutler writes: >> By accident, I rebooted my box with an msdog partition mounted >> manually (i.e. it is not in /etc/fstab). Now, msdog can't >> access the partition, and linux says the superblock is corrupt >> when I try to mount it with mount -t msdos. Tom> I don't know what happened, but I do this sort of thing all Tom> the time (i.e. reboot system with manually mounted Tom> partitions). I've yet to run into this sort of problem. What Tom> release are you running? I'm running a modified 1.1 system. The whole question is moot now, because I've moved the disk that contains the damaged partition to another box. I think one of two things happened: (1) the msdog partition was not synced when I rebooted and the reboot left it in an unstable state, or (2) DOSEMU (which I was running on the partition as well) left the partition in an unstable state when I exited. Today I realized a long-time dream of mine -- I built myself a second box for msdog and NT. Hopefully, I'll never have to run two operating systems on one machine again! I have both boxes connected to the same monitor, keyboard and mouse through a mechanical A/B switch (a local firm custom makes them). If there's anybody out there who is fed up with continually rebooting their machine because they are forced to run Windows software against their better judgment, I highly recommend this solution. -- Nathan L. Cutler Linux Enthusiast http://www.cise.ufl.edu/~nlc -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: Install questions
> "Terrence" == Terrence M Brannon <[EMAIL PROTECTED]> writes: Terrence> - how do I allow DOS to be booted Terrence> from a LILO prompt? I had this same question and remember having to do more than the normal amount of manual reading to figure it out. Since the solution is extremely simple, this should not have been the case. Hopefully, this will save you from having to go through what I did. Edit /etc/lilo.conf and add the following clause to it: # DOS bootable partition config begins other = /dev/hda1 label = msdog table = /dev/hda # loader = /boot/any_d.b # DOS bootable partition config ends Change '/dev/hda1' to the right device for your system (i.e. the partition on which you have msdog installed). If it doesn't work like that, try uncommenting the load = /boot/any_d.b line. If you have any trouble, feel free to contact me directly. -- Nathan L. Cutler Linux Enthusiast http://www.cise.ufl.edu/~nlc -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: LI???
Kendrick Myatt <[EMAIL PROTECTED]> writes: > Just curious... I also just noticed there is "1.2 fixed" at the Debian site, > so I am about to re-install with those images... The boot disks are the same though (for now). You can upgrade to 1.2.1 by just installing everything in 1.2-updates or by pointing dselect at 1.2-fixed. The READMEs strewn about explain everything. Guy -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
using fork in cgi & perl
Hi, I'm having a hard time getting fork to work correctly in a cgi script. Basically I have a time consuming process which I want to be done in the background. I have something like this: unless (fork) { # print out result html page exit 0; } else { # do time-intensive stuff } What's happening is that the child process executes (and becomes zombie) and the parent process continues to chug along. The cgi result html only comes up after the long process finishes... I've tried switching the parent & child to see if it makes a difference, but it doesn't. In every case, the html output goes into zombie state, and the result page is only displayed after the entire process is complete. Almost as if the fork isn't working as intended... Any ideas? Thanks, Ricardo -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: Has anyone installed on a Toshiba T2115CS?
On Wed, 1 Jan 1997, Alex Lobkovsky wrote: > Did you turn off power managment in the BIOS? Yes, I've turned off the three items that TSETUP lets me get to. I have found that I can run with an external display without any problem. Last night, I was running DOS on the thing and the back of the display (what I would call the top) got quite hot and there was kind of an ozone smell when it shutdown. I plugged in the external display and disabled the internal, the machine kept running and the lap-top cooled down. This was a rebuild machine, I am getting very suspicious of a hardware problem at this point. However, I'm going to re-install the Windows95 that it came with as a last resort before I spend lots of money to get it fixed. Thanks, Frank -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Bruce off-line due to flood
Our house was damaged by flood water - so far not very badly, but it could get worse. I currently have no operating computers at home and am busy cleaning up. I've asked the other Debian developers to fill in for me. I'm speaking at USELINUX on the 9th, and I don't know how useful I will be to the project before then. The developers have my phone number if someone needs to reach me in the next few days. Thanks Bruce Perens Debian Project Leader -- Bruce Perens K6BP [EMAIL PROTECTED] Finger [EMAIL PROTECTED] for PGP public key. PGP fingerprint = 88 6A 15 D0 65 D4 A3 A6 1F 89 6A 76 95 24 87 B3 -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: Useing $HOME in .fvwmrc file ?
> Stan Brown writes: Stan> Can I do this? If so how? I need to set up a pixmap Stan> path that will point to a place relative to the users home Stan> directory. (1) Use ~/foo to refer to a directory in your home directory. (2) Use m4 or cpp to preprocess your .fvwmrc file and use their way of referring to environment variables. I'm not sure if (1) works but (2) works. kai -- I wonder why nobody don't like me, or is it de fact dat I'm ugly? -- Harry Belafonte -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]