Re: denegar acces a web
Per exemple: # Acceptem navegacio dintre la xarxa privada iptables -t filter -A OUTPUT -d 192.168.0.0/16 -p tcp -m tcp --dport 80 -j ACCEPT # Acceptem pop3 i smtp iptables -t filter -A OUTPUT -p tcp -m tcp --dport 25 -j ACCEPT iptables -t filter -A OUTPUT -p tcp -m tcp --dport 110 -j ACCEPT # Deneguem la resta iptables -t filter -A OUTPUT -j DROP El Monday 07 April 2008 12:10:22 Pere Nubiola Radigales va escriure: denegar per tots els ports excepte pop3 i smtp el acces a a les ips que no siguin de la xarxa mitjançant iptables 2008/4/7, Víctor Domènech [EMAIL PROTECTED]: Hola quina seria la millor manera de denagar l'acces a la web d'un terminal dins una xarxa pero permetre l'acces a pop3 i smtp es a dir sense proxy, que l'usuari pugui connectar-se a la xarxa local però no a Internet a cap pagina web externa si a la xarxa local, i enviar i rebra correu. moltes gracies -- Víctor Domènech Goya 11 1r 2a 08012 Barcelona [EMAIL PROTECTED] 617 41 81 99 Linux User #432064 http://counter.li.org Pots confiar en el teu ordinador ? http://www.gnu.org/philosophy/can-you-trust.es.html http://www.gnu.org/philosophy/no-word-attachments.es.html -- Jaume Sabater
Re: denegar acces a web
denegar per tots els ports excepte pop3 i smtp el acces a a les ips que no siguin de la xarxa mitjançant iptables 2008/4/7, Víctor Domènech [EMAIL PROTECTED]: Hola quina seria la millor manera de denagar l'acces a la web d'un terminal dins una xarxa pero permetre l'acces a pop3 i smtp es a dir sense proxy, que l'usuari pugui connectar-se a la xarxa local però no a Internet a cap pagina web externa si a la xarxa local, i enviar i rebra correu. moltes gracies -- Víctor Domènech Goya 11 1r 2a 08012 Barcelona [EMAIL PROTECTED] 617 41 81 99 Linux User #432064 http://counter.li.org Pots confiar en el teu ordinador ? http://www.gnu.org/philosophy/can-you-trust.es.html http://www.gnu.org/philosophy/no-word-attachments.es.html -- Pere Nubiola Radigales Telf: +34 656316974 e-mail: [EMAIL PROTECTED] [EMAIL PROTECTED]
Re: denegar acces a web
No estic segur del tot, però amb xinetd em penso que es pot fer. Pere Nubiola Radigales wrote: denegar per tots els ports excepte pop3 i smtp el acces a a les ips que no siguin de la xarxa mitjançant iptables 2008/4/7, Víctor Domènech [EMAIL PROTECTED]: Hola quina seria la millor manera de denagar l'acces a la web d'un terminal dins una xarxa pero permetre l'acces a pop3 i smtp es a dir sense proxy, que l'usuari pugui connectar-se a la xarxa local però no a Internet a cap pagina web externa si a la xarxa local, i enviar i rebra correu. moltes gracies -- Víctor Domènech Goya 11 1r 2a 08012 Barcelona [EMAIL PROTECTED] 617 41 81 99 Linux User #432064 http://counter.li.org Pots confiar en el teu ordinador ? http://www.gnu.org/philosophy/can-you-trust.es.html http://www.gnu.org/philosophy/no-word-attachments.es.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: denegar acces a web
La millor manera es fer que un ordinador faci de firewall i pasar al firewall regles que impredeixin l'acces a on vulguis. Si no tens firewall, pots posar les regles de firewall al mateix ordinador pero algu amb compte de root al terminal les pot treure. On Mon, 7 Apr 2008 11:26:55 +0200, Víctor Domènech [EMAIL PROTECTED] wrote: Hola quina seria la millor manera de denagar l'acces a la web d'un terminal dins una xarxa pero permetre l'acces a pop3 i smtp es a dir sense proxy, que l'usuari pugui connectar-se a la xarxa local però no a Internet a cap pagina web externa si a la xarxa local, i enviar i rebra correu. moltes gracies -- Salutacions / Regards Ferran Pegueroles Forcadell mailto:[EMAIL PROTECTED] http://www.pegueroles.cat Tels (+34)937252106 - (+34)667658535 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: denegar acces a web
Caldria veure si també necessita permetre paquets UDP, segurament que sí per als DNS. David 2008/4/7 Jaume Sabater [EMAIL PROTECTED]: Per exemple: # Acceptem navegacio dintre la xarxa privada iptables -t filter -A OUTPUT -d 192.168.0.0/16 -p tcp -m tcp --dport 80 -j ACCEPT # Acceptem pop3 i smtp iptables -t filter -A OUTPUT -p tcp -m tcp --dport 25 -j ACCEPT iptables -t filter -A OUTPUT -p tcp -m tcp --dport 110 -j ACCEPT # Deneguem la resta iptables -t filter -A OUTPUT -j DROP
Re: pas de son avec les vidéos sous Iceweas el
hello, Je suis sous Debian-Etch 64 bits avec tous les modules alsa installés et le son marche très bien, (alsa, alsa-utils, alsasound), SAUF que je n'ai pas le son avec Iceweasel ou FireFox ; vidéos de youtube par exemple. (J'ai bien l'image mais pas l'audio) Je dois préciser que le son a fonctionné au début sous les navigateurs et puis d'un seul coup plus d'audio. J'ai un message d'erreur venant de artsmessage ... mais rarement tu as désactiver le mixage son logiciel ESD dans les préférences son ? Bureau ou administration --- préférences son cordialement claude -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Rech Outils PDF
Bernardo a écrit : philippe L a écrit : Bonjour, Ya t'il un paquet ou outils qui permet de créer des liens dans un document PDF entre la table des matière et les paragraphe ? Merci Ptilou Il y a PDF Editor, dans le paquet pdfedit, mais sa prise en mains ne (me ?) semble pas simple. Pour modifier un PDF, c'est certainement une solution, par contre si c'est pour créer des PDF avec des liens, OpenOffice.org fait cela en base sans aucun réglage particulier depuis la version 2.0 http://fr.openoffice.org/ A+ Luc. -- _ o / \\ \_/ O ° Faites un cadeau aux générations futures, abandonnez votre voiture ! begin:vcard fn:Luc Novales n:Novales;Luc email;internet:[EMAIL PROTECTED] tel;work:05-62-25-95-29 tel;fax:05-62-25-95-99 version:2.1 end:vcard
Re: iceweasel par deaut Debian
Bonjour, DivFauser a écrit : rubili a écrit : Tourneur Henry-Nicolas a écrit : On Sunday 06 April 2008, rubili wrote: Bonjour! Bonjour, Je regarde les news Gmane avec Icedove et qu'en je clique sur une adresse , il m'ouvre Epiphany , alors que je préférerai iceweasel (impossible de mettre celui ci par défaut ) j'ai pourtant réglé applications préférences en conséqence En cherchant 2 secondes sur google : http://www.linuxhelp.net/forums/Setup_Default_Gnome_Browser_t3428.html Éxecute la commande : gnome-default-applications-properties En général, essaye de chercher une réponse à ta question en allant d'abord sur google, c'est le genre de problème auquel tu trouve facilement une solution. merci pour vos réponses Jo Merci mais ça ne fonctionne pas , j'avais déja essayer d'autres commandes sans succés , par contre Pan ouvre trés bien iceweasel Bonne soirée Voila ma méthode : !! Pour ouvrir un lien http(s) dans firefox (Iceweasel) à partir de Thunderbird (Icedove) il faut un fichier user.js dans: ~/.thunderbird/.default Si ce fichier n'existe pas le créer. Ensuite y inscrire : user_pref(network.protocol-handler.app.http,/lechemin/vers/firefox/firefox); user_pref(network.protocol-handler.app.https,/lechemin/vers/firefox/firefox); Une façon plus aisée d'acceder à ces variables est de passer par l'interface de thunderbird : préferences - avancé - éditeur de configuration. Puis rajouter ces clé et leurs valeurs. Luc. -- _ o / \\ \_/ O ° Faites un cadeau aux générations futures, abandonnez votre voiture ! begin:vcard fn:Luc Novales n:Novales;Luc email;internet:[EMAIL PROTECTED] tel;work:05-62-25-95-29 tel;fax:05-62-25-95-99 version:2.1 end:vcard
[Etch] Connexions refusées
Bonjour, J'ai installé récemment une série de programmes concernant divers domaines de l'informatique ; au redémarrage du micro, le login root ou simple utilisateur ne fonctionne plus et je ne peux donc pas taper le MdP. Je précise que la distribution Debian Etch est installée via plusieurs répertoires : /usr, /var, /home ... Quelqu'un aurait-il une idée pour que je puisse à nouveau entrer dans Debian ? Par avance, merci. -- Ph. Gayot
Re: iceweasel par deaut Debian
Luc Novalès a écrit : Bonjour, DivFauser a écrit : rubili a écrit : Tourneur Henry-Nicolas a écrit : On Sunday 06 April 2008, rubili wrote: Bonjour! Bonjour, Je regarde les news Gmane avec Icedove et qu'en je clique sur une adresse , il m'ouvre Epiphany , alors que je préférerai iceweasel (impossible de mettre celui ci par défaut ) j'ai pourtant réglé applications préférences en conséqence Voila ma méthode : !! Pour ouvrir un lien http(s) dans firefox (Iceweasel) à partir de Thunderbird (Icedove) il faut un fichier user.js dans: ~/.thunderbird/.default Si ce fichier n'existe pas le créer. Ensuite y inscrire : user_pref(network.protocol-handler.app.http,/lechemin/vers/firefox/firefox); user_pref(network.protocol-handler.app.https,/lechemin/vers/firefox/firefox); Une façon plus aisée d'acceder à ces variables est de passer par l'interface de thunderbird : préferences - avancé - éditeur de configuration. je prends ce fil en cours pour dire bonjour et merci à luc, ta méthode marche impec je suis sur deb etch4 , il suffit dans l'éditeur de configuration de remplacer les valeurs de network.protocol-handler.app.http et network.protocol-handler.app.https qui est x.www.brother par iceweasel et le tour est joué. merci depuis le temps que je cherchais ! cordialement -- Jipe -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: pas de son avec les vidéos sous Iceweas el
[EMAIL PROTECTED] a écrit : Bonjour, J'ai un problème récurrent de son sous le navigateur Iceweasel. Avec mon ancien PC et une carte son d'un autre modèle, c'était pareil. (jamais réussi à avoir le son sous un navigateur) Je suis sous Debian-Etch 64 bits avec tous les modules alsa installés et le son marche très bien, (alsa, alsa-utils, alsasound), SAUF que je n'ai pas le son avec Iceweasel ou FireFox ; vidéos de youtube par exemple. (J'ai bien l'image mais pas l'audio) Je dois préciser que le son a fonctionné au début sous les navigateurs et puis d'un seul coup plus d'audio. J'ai un message d'erreur venant de artsmessage ... mais rarement. Je vois via Google, que je ne suis pas le seul avec ce même problème, mais aucune réponse crédible nulle part. Grand merci d'une aide. d'un tuyau. antoine Bonjour j'ai eu le même problème (je pense) et la solution est là : http://lists.debian.org/debian-user-french/2007/08/msg00274.html en espèrant pouvoir t'aider cordialement -- Jipe -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
6 Ways to Fight Allergies and Win!
Please add @ivillage.com to your address book to ensure your newsletters are delivered correctly. http://health.ivillage.com/newsletters/archive/lifestyle/0,,cq9sx10t,00.html Live Longer, Live Better April 7, 2008 - Newsletter 6 Ways to Fight Allergies and Win! Are you ready for sniffle season? As the saying goes, April showers bring May flowers. And May flowers bring on allergy season. Find out how to control the most common allergy culprits at home, at work and at play. Plus: Already under attack? Find out how to manage your symptoms and feel better fast. To your health, Michele Bloomquist iVillage Staying Healthy Newsletter Editor Links for this section: Image link: http://yourtotalhealth.ivillage.com/allergies allergy season: http://yourtotalhealth.ivillage.com/allergies at home: http://yourtotalhealth.ivillage.com/allergies-home-your-allergy-free-zone at work: http://yourtotalhealth.ivillage.com/allergies-meet-allergens at play: http://yourtotalhealth.ivillage.com/allergies-love-outdoors-again manage your symptoms: http://yourtotalhealth.ivillage.com/allergies-manage-your-allergies iVillage Staying Healthy: http://yourtotalhealth.ivillage.com/staying-healthy This Week's Most Popular Features 7 diet trends What's behind your symptoms? Kick the smoking habit Shape up for spring Free custom weight loss plan Help someone face allergy season. Forward this e-mail Links for this section: 7 diet trends: http://slideshow.ivillage.com/diet/diet_at_the_village_have_it_your_way/slim_down_with_these_spring_tr.html Whats behind your symptoms: http://solver.ivillage.com/symptomsolver/selectSymptoms.cfm Kick the smoking habit: http://yourtotalhealth.ivillage.com/quit-smoking Shape up for spring: http://yourtotalhealth.ivillage.com/diet-fitness/small-diet-changes-big-differences-sign-up.open.html Free custom weight loss plan: http://www.healthylivingonline.com/login/index.cfm Treating Chronic Pain Chronic pain is pain that continues past the normal healing time for an injury. Learn about the causes and current treatment options, from NSAIDs to opioids, for chronic pain.View more. Links for this section: Learn about the causes and current treatment options: http://www.healthology.com/pain-management/pain-relief/video4864.htm View more.: http://www.healthology.com/pain-management/pain-relief/focusareasub.htm Manage Your iVillage Email Subscriptions. You are subscribed as debian-user-french@lists.debian.org To unsubscribe from this newsletter visit https://subscriber.ivillage.com/profile/newsletter?pser=EbhhpcbLbeakcfloPpihn1[EMAIL PROTECTED] or visit https://subscriber.ivillage.com/funnels/6. Privacy Policy: http://www.ivillage.com/about/0,,qqzh,00.html iVillage Inc, 904 Sylvan Avenue, 2nd Floor, Englewood Cliffs, NJ 07632 (c) iVillage, Inc. 2008. All rights reserved. http://www.ivillage.com
Re: pas de son avec les vidéos sous Iceweasel
Le lundi 07 avril 2008 à 09:56 +0200, Claudux a écrit : hello, Je suis sous Debian-Etch 64 bits avec tous les modules alsa installés et le son marche très bien, (alsa, alsa-utils, alsasound), SAUF que je n'ai pas le son avec Iceweasel ou FireFox ; vidéos de youtube par exemple. (J'ai bien l'image mais pas l'audio) Je dois préciser que le son a fonctionné au début sous les navigateurs et puis d'un seul coup plus d'audio. J'ai un message d'erreur venant de artsmessage ... mais rarement tu as désactiver le mixage son logiciel ESD dans les préférences son ? Bureau ou administration --- préférences son cordialement claude Si c'est juste pour regarder youtube, pourquoi s'embêter avec le flash d'adobe ? aptitude install swfdec-mozilla et le tour est joué. x86_64 compatible ;) -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: pas de son avec les vidéos sous Iceweasel
Le lundi 7 avril 2008 09:56, Claudux a écrit : Je suis sous Debian-Etch 64 bits avec tous les modules alsa installés et le son marche très bien, (alsa, alsa-utils, alsasound), SAUF que je n'ai pas le son avec Iceweasel ou FireFox ; vidéos de youtube par exemple. (J'ai bien l'image mais pas l'audio) - tu as désactiver le mixage son logiciel ESD dans les préférences son ? Bureau ou administration --- préférences son Ou se trouve ces rubriques ? : Bureau ou administration --- préférences son Je suis sous KDE. antoine
Re: [Etch] Connexions refus ées
Le 07-04-2008, à 12:22:37 +0200, Philippe Gayot ([EMAIL PROTECTED]) a écrit : Bonjour, Bonjour, J'ai installA(c) rA(c)cemment une sA(c)rie de programmes concernant divers domaines de l'informatique ; au redA(c)marrage du micro, le login root ou simple utilisateur ne fonctionne plus et je ne peux donc pas taper le MdP. Tu veux dire que tu n'arrive plus au moment où tu peux entrer un login, ou le mdp ne marche plus ? Je prA(c)cise que la distribution Debian Etch est installA(c)e via plusieurs rA(c)pertoires : /usr, /var, /home ... Ce qui semble plus ou moins normal.. Quelqu'un aurait-il une idA(c)e pour que je puisse A nouveau entrer dans Debian ? Démarrer sur une knoppix ou autre et recréer un nouveau compte ? Mais sans précision il va être difficile de plus aider. Par avance, merci. De rien, Steve -- Ph. Gayot -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [Etch] Connexions refus ées
Le 07-04-2008, à 14:11:18 +0200, GiGGz ([EMAIL PROTECTED]) a écrit : Lignes : 57 Steve a écrit : Le 07-04-2008, à 12:22:37 +0200, Philippe Gayot ([EMAIL PROTECTED]) a écrit : Bonjour, Bonjour, J'ai installA(c) rA(c)cemment une sA(c)rie de programmes concernant divers domaines de l'informatique ; au redA(c)marrage du micro, le login root ou simple utilisateur ne fonctionne plus et je ne peux donc pas taper le MdP. Tu veux dire que tu n'arrive plus au moment où tu peux entrer un login, ou le mdp ne marche plus ? Bon c'est peut être bête, mais ça nous est tous arrivé à un moment ou à un autre : le caps lock est désactivé ? ton clavier est bien en azerty ? Au moment de taper ton login, regarde si tu tapes ton mot de passe à la place, si celui-ci s'affiche bien... on ne sait jamais... Pour le reste, je laisse des plus expérimentés te guider. Ce qui est clair c'est qu'il va falloir booter sur un live-cd... tout dépend de jusqu'à quel niveau il arrive. Si ça se trouve, il ne dépasse pas le début du boot. D'ailleurs il arrive qu'un nouveau périphérique usb branché au moment du boot l'empêche de continuer. Est-ce ton cas ? -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: iceweasel par deaut Debian
jipe a écrit : je prends ce fil en cours pour dire bonjour et merci à luc, ta méthode marche impec je suis sur deb etch4 , il suffit dans l'éditeur de configuration de remplacer les valeurs de network.protocol-handler.app.http et network.protocol-handler.app.https qui est x.www.brother par iceweasel et le tour est joué. merci depuis le temps que je cherchais ! cordialement Et pour les filles la valeur par défaut c'est x.www.sister ? Trève de plaisanterie, plutôt que de bidouiller dans la conf de icedove autant aller modifier directement les alias gnome-www-browser et x-www-browser avec update-alternatives. Ca me semble tout de même un peu plus propre. rvdru -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [Etch] Connexions refusées
Steve a écrit : Le 07-04-2008, à 12:22:37 +0200, Philippe Gayot ([EMAIL PROTECTED]) a écrit : Bonjour, Bonjour, J'ai installA(c) rA(c)cemment une sA(c)rie de programmes concernant divers domaines de l'informatique ; au redA(c)marrage du micro, le login root ou simple utilisateur ne fonctionne plus et je ne peux donc pas taper le MdP. Tu veux dire que tu n'arrive plus au moment où tu peux entrer un login, ou le mdp ne marche plus ? Bon c'est peut être bête, mais ça nous est tous arrivé à un moment ou à un autre : le caps lock est désactivé ? ton clavier est bien en azerty ? Au moment de taper ton login, regarde si tu tapes ton mot de passe à la place, si celui-ci s'affiche bien... on ne sait jamais... Pour le reste, je laisse des plus expérimentés te guider. Ce qui est clair c'est qu'il va falloir booter sur un live-cd... Ciao Je prA(c)cise que la distribution Debian Etch est installA(c)e via plusieurs rA(c)pertoires : /usr, /var, /home ... Ce qui semble plus ou moins normal.. Quelqu'un aurait-il une idA(c)e pour que je puisse A nouveau entrer dans Debian ? Démarrer sur une knoppix ou autre et recréer un nouveau compte ? Mais sans précision il va être difficile de plus aider. Par avance, merci. De rien, Steve -- Ph. Gayot -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: sources.list Debian
David Prévot a écrit : -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 David Prévot a écrit : Si tu veux utiliser les backports, mais que tu préfères laisser la priorité aux paquets officiels, alors oui, tu vas avoir besoin de créer un fichier etc/apt/preferences Tourneur Henry-Nicolas a écrit : [...] Par défaut, la priorité associée aux paquets de Debian Stable vaut 500 et ceux de backports 1. Cela veut dire que si tu ne spécifie rien, ce sont les paquets standard qui seront utilisé ce qui est normal. Oups, effectivement, toutes mes excuses (dans mes souvenirs ce n'était pas le cas, j'aurais mieux fait de relire les documentations que je propose avant de poster). Amicalement David -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) iD8DBQFH+T4v18/WetbTC/oRAqdzAJwNhQFnmfCx0geGqchrtJEANKwXqwCgm0nI 8fR9AS6CZoYyQbN1xFrEyX0= =ZUS7 -END PGP SIGNATURE- Merci pour ta réponse Jo -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: iceweasel par deaut Debian
jipe a écrit : Luc Novalès a écrit : Bonjour, DivFauser a écrit : rubili a écrit : Tourneur Henry-Nicolas a écrit : On Sunday 06 April 2008, rubili wrote: Bonjour! Bonjour, Je regarde les news Gmane avec Icedove et qu'en je clique sur une adresse , il m'ouvre Epiphany , alors que je préférerai iceweasel (impossible de mettre celui ci par défaut ) j'ai pourtant réglé applications préférences en conséqence Voila ma méthode : !! Pour ouvrir un lien http(s) dans firefox (Iceweasel) à partir de Thunderbird (Icedove) il faut un fichier user.js dans: ~/.thunderbird/.default Si ce fichier n'existe pas le créer. Ensuite y inscrire : user_pref(network.protocol-handler.app.http,/lechemin/vers/firefox/firefox); user_pref(network.protocol-handler.app.https,/lechemin/vers/firefox/firefox); Une façon plus aisée d'acceder à ces variables est de passer par l'interface de thunderbird : préferences - avancé - éditeur de configuration. je prends ce fil en cours pour dire bonjour et merci à luc, ta méthode marche impec je suis sur deb etch4 , il suffit dans l'éditeur de configuration de remplacer les valeurs de network.protocol-handler.app.http et network.protocol-handler.app.https qui est x.www.brother par iceweasel et le tour est joué. merci depuis le temps que je cherchais ! cordialement J'ai utilisé la même methode et c'est OK Merci a tous pour les réponses Jo -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Get FREE Natural Beauty Courses from iVillage
An iVillage Special Offer Face Your Future with FREE Natural Beauty Courses Brought to you by iVillage and St. Ives Natural beauty is that allover glow of health and vitality that radiates from the inside out. If you're overdue for some special pampering, learn simple ways to indulge body, mind and spirit! Discover your true beauty self - naturally - with this month's FREE online courses: * Natural Skin Care * Take Time for Yourself * Balancing Act: Managing Time and Stress in a Busy World For head to toe beauty, enroll today! Visit http://ilearn.ivillage.com/campus.jsp?ivillagepsession.id=0cc925a1c3b7054c92ac44a78b63campusId=1800mcId=0408stivescampus Advertiser Address: iVillage 904 Sylvan Avenue 2nd Floor Englewood Cliffs, NJ 07632 Manage Your Subscriptions: You are subscribed to receive updates, special offers and promotions at: [EMAIL PROTECTED] To unsubscribe or manage your subscriptions to iVillage Group commercial mailings, please click here: https://subscriber.ivillage.com/funnels/9 iVillage Inc, 904 Sylvan Avenue, 2nd Floor, Englewood Cliffs, NJ 07632, U.S.A. © iVillage, Inc. 2008. All rights reserved. http://www.ivillage.com
CONSIDER MY URGENT REQUEST.
You are invited to CONSIDER MY URGENT REQUEST.. By your host Youssefu Karim: Date: Monday April 7, 2008 Time: 12:00 pm - 1:00 pm (GMT +00:00) Will you attend? RSVP to this invitation at: http://calendar.yahoo.com/dr_2youssefukarim?v=126a1=0iid=uhaVd4x%40dM7z%40FDLHxQC0td%40ukDMan4BV%40AVP8nahqv%40igid=BhpQY6h%406Ko5aESJ1xASn%40xdhz80%40iuTJpEWrKj%40%40O1i%40eeT Copyright © 2008 All Rights Reserved www.yahoo.com Privacy Policy: http://privacy.yahoo.com/privacy/us Terms of Service: http://docs.yahoo.com/info/terms/
Re: pas de son avec les vidéos sous Iceweasel
Le lundi 7 avril 2008 13:43, vous avez écrit : Le lundi 7 avril 2008 09:56, Claudux a écrit : Je suis sous Debian-Etch 64 bits avec tous les modules alsa installés et le son marche très bien, (alsa, alsa-utils, alsasound), SAUF que je n'ai pas le son avec Iceweasel ou FireFox ; vidéos de youtube par exemple. (J'ai bien l'image mais pas l'audio) - tu as désactiver le mixage son logiciel ESD dans les préférences son ? Bureau ou administration --- préférences son - Si je lance iceweasel via le terminal : ALSA lib ../../../src/pcm/pcm_plug.c:1189:(_snd_pcm_plug_open) Unknown field hint ALSA lib ../../../src/pcm/pcm.c:2106:(snd_pcm_open_conf) Cannot open shared library /usr/lib/alsa-lib/libasound_module_pcm_empty.so Ce sont 2 messages intéressants ... Mais que faire ? antoine
[RESOLU à 75%]: Chipset Audio VIA versus Lenny versus Etch.
J'essaye d'installer une debian en 64 bits sur un portable Clevo M660. J'ai un problème avec le son. J'installe d'abord une etch puis je dist-upgrade. Sous etch avec un noyau 2.6.18 on entend le son faiblement mais clairement. Toujours en etch, j'installe un noyau 2.6.22 backporté et là ça fonctionne impeccablement (micro + audio sortie casque et enceintes intégrées). A ce moment précis la version d'Alsa est la 1.0.13. Puis je passe en Lenny avec le dernier noyau 2.6.24 et là c'est la galère. Dans Alsamixer, si je n'ai pas PCM au maximum l'enceinte intégrée droite part en cacahuète genre j'ai un aspirateur dans la gorge tant et si bien que le crépitement (le mot est faible) recouvre la sortie de l'autre enceinte. Une fois PCM à fond, l'enceinte gueularde se tait... et je me retrouve en mono! J'ai essayé plusieurs combinaison entre les version de Alsa (1.013-1.016) et les noyaux mais une fois que j'ai dist-upgradé vers lenny c'est HS. Ca ne dépende pas du noyau. C'est le paquet libasound2 qui ne fonctionne pas lorsque je passe en lenny, il faut garder la version etch (1.0.13-2). Du coup j'ai pas mal de dépendances cassés... Et je galère à bloquer la mise à jour (aptitude hold, /etc/apt/preferences ne prennent pas), mais c'est une autre histoire. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Firefox 3 dans Debian ?
David BERCOT [EMAIL PROTECTED] a tapoté : Bonjour, Bonjour, La question de Patrice me fait penser à autre chose : a-t-on Firefox 3 dans Debian ? La version 3.0~b5-1 est disponible dans experimental[1] pour amd64 et i386. 1. http://packages.debian.org/experimental/iceweasel Olivier; -- gpg --keyserver pgp.mit.edu --recv-keys 0x578499CB __ Olivier Tétard site : http://toutoune25.miskin.fr JabberID : [EMAIL PROTECTED] __ pgpDmOW6oRvsH.pgp Description: PGP signature
Re: smbmount input/output error sur Etch
désolé du retard, partis envacances merci pour le tuyau, j'utilise, à présent mount.cifs en root : mount.cifs -o rw,user //IP/share /mnt/ le point de montage est lisible sans erreurs, mais en tant que user je ne sais pas écrire ni détruire, malgré les options rw et user... une solution ? merci -Original Message- From: Yannick Palanque [EMAIL PROTECTED] To: debian-user-french@lists.debian.org Date: Thu, 3 Apr 2008 17:49:01 +0200 Subject: Re: smbmount input/output error sur Etch Guy-Roger Tilkin écrivit : A partir d'une Debian etch, j'essaye de monter un share samba d'un serveur distant en local, avec la commande : smbmount //IP/share /mountpoint -o J'avais lu qu'il vaut mieux utiliser mount.cifs ou mount -t cifs « The CIFS protocol is the successor to the SMB protocol » SMB a des bugs qui ne sont plus corrigés. -- « Quand je serai grand, je ferai des bug reports sur la LKML » -- Octane in fcolm -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists [http://wiki.debian.org/DebFrFrenchLists] Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: smbmount input/output error sur Etch
Le 7 avr. 08 à 18:39, guy-roger Tilkin a écrit : désolé du retard, partis envacances merci pour le tuyau, j'utilise, à présent mount.cifs en root : mount.cifs -o rw,user //IP/share /mnt/ le point de montage est lisible sans erreurs, mais en tant que user je ne sais pas écrire ni détruire, malgré les options rw et user... options uid= et gid= ? Sinon, mettre la ligne qui va bien dans /etc/fstab avec noauto, user, ensuite monter en tant que user. Je ne suis plus très sûr du résultat. T.
Installation apache2 php4 : problème phtml
Bonsoir, je viens d'installer apache2 et php4 sur une etch. J'ai voulu installer wordpress mais quand je demande http://localhost/wordpress il me propose de télécharger un fichier finissant par phtml et qui contient le source de index.php. Par contre si je demande http://127.0.0.1/wordpress ca marche comme il faut. Est-ce quelqu'un connais la solution pour que ca marche aussi avec localhost comme url ? Merci, Vincent
Re: Installation apache2 php4 : problème phtml
Hmm, petit pb de correspondance dans /etc/hosts ? Mon fichier /etc/hosts contient les 2 lignes : 127.0.0.1 localhost 172.0.1.1 le_nom_de_ma_machine plus des trucs pour l'ipv6 Il y a un problème dans ce fichier ? Je penche pour un problème d'apache mais je ne vois pas pourquoi. Je ne me rappelle pas avoir déjà eu ce problème. J'ai pour essayer de rajouter une directive DirectoryIndex dans httpd.conf mais ça n'a rien changé. Vincent
[HS] NIS et DNS
Salut, Pas complètement HS vu que ça concerne une machine sous Debian. Mon soucis est que j'ai une machine sous Debian Testing qui fonctionnait parfaitement au niveau DNS. J'ai eu besoin d'installer NIS pour pouvoir me connecter sur certains serveurs. Mission réussie mais depuis j'ai perdu la résolution des noms par les DNS. Comment faire cohabiter les deux? Gaëtan -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [HS] NIS et DNS
Gaëtan PERRIER [EMAIL PROTECTED] writes: Salut, Bonsoir, Pas complètement HS vu que ça concerne une machine sous Debian. Mon soucis est que j'ai une machine sous Debian Testing qui fonctionnait parfaitement au niveau DNS. J'ai eu besoin d'installer NIS pour pouvoir me connecter sur certains serveurs. Mission réussie mais depuis j'ai perdu la résolution des noms par les DNS. Comment faire cohabiter les deux? Dans /etc/nsswitch.conf, il faut avoir la ligne: hosts: files nis dns -- Nicolas -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [HS] NIS et DNS
On Mon, Apr 07, 2008 at 10:42:29PM +0200, Gaëtan PERRIER [EMAIL PROTECTED] wrote a message of 21 lines which said: J'ai eu besoin d'installer NIS pour pouvoir me connecter sur certains serveurs. Mission réussie mais depuis j'ai perdu la résolution des noms par les DNS. Comment faire cohabiter les deux? Que contient /etc/nsswitch.conf ? Il devrait y avoir quelque chose du genre : hosts: files dns nisplus -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [HS] NIS et DNS
Le Mon, 07 Apr 2008 23:05:54 +0200 Nicolas KOWALSKI [EMAIL PROTECTED] a écrit: Gaëtan PERRIER [EMAIL PROTECTED] writes: Salut, Bonsoir, Pas complètement HS vu que ça concerne une machine sous Debian. Mon soucis est que j'ai une machine sous Debian Testing qui fonctionnait parfaitement au niveau DNS. J'ai eu besoin d'installer NIS pour pouvoir me connecter sur certains serveurs. Mission réussie mais depuis j'ai perdu la résolution des noms par les DNS. Comment faire cohabiter les deux? Dans /etc/nsswitch.conf, il faut avoir la ligne: hosts: files nis dns Je n'ai pas accès à la machine actuellement (pas avant demain) mais de mémoire je ne crois pas qu'il y ait files. Par ailleurs Stéphane dans sa réponse ne donne pas le même ordre (files dns nisplus) et toi (files nis dns). Est-ce que ça peut jouer? Gaëtan -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: smbmount input/output error sur Etch
Le 7 avr. 08 à 18:39, guy-roger Tilkin a écrit : désolé du retard, partis envacances merci pour le tuyau, j'utilise, à présent mount.cifs en root : mount.cifs -o rw,user //IP/share /mnt/ le point de montage est lisible sans erreurs, mais en tant que user je ne sais pas écrire ni détruire, malgré les options rw et user... options uid= et gid= ? Sinon, mettre la ligne qui va bien dans /etc/fstab avec noauto, user, ensuite monter en tant que user. Je ne suis plus très sûr du résultat. T. j'ai placé la ligne dans /etc/fstab : mount //IP/share /mnt/share cifs noauto,user,rw,user 00 quand j'essaye d'accéder le share en simple user, j'ai ce message : permission denied, no superuser or mount.cifs nosetuid... pourtant, j'ai tenté de faire un setuid sur /sbin/mount.cifs (chmod u+s /sbin/mount.cifs et chmod u+s /sbin/umount.cifs), toujours le même message .. merci d'avance. guyR
Re: Ouverture des fichiers .doc, .xls ... distants
Ok Samy, Je monte aujourd'hui le paquet autofs et je te fais un retour. :) Le 02/04/08, Samy Mezani[EMAIL PROTECTED] a écrit : hmm, excuses moi, j'ai retesté de mon côté, c'est bien openoffice qui plante dans ce cas, j'ai parlé trop vite. Par contre, ça ne change rien pour la solution. Samy Patrice OLIVER a écrit : En fait, je penses que nous sommes partis dans des considérations fausse. Je repose mon problème initial. Je suis dans Konqueror. J'utilise une ressource située sur smb://serveur Lorsque je cliques sur le document (un .xls par exemple), openoffice.org commence à se lancer, puis s'arrête car je penses qu'il ne peut pas ouvrir ledit document. Je suis donc obligé d'en faire une copie locale pour l'ouvrir ; pas top, alors que cela fonctionne sans effort sur une ArchLinux ... -- Debian Etch 2.6.18-6-powerpc iMac G3 350MHz
Re: [HS] NIS et DNS
Gaëtan, L'ordre des resolvers de la ligne hosts te donne simplement l'ordre de résolution. Si tu n'utilises NIS que pour tes comptes et automontage, tu préfereras la version de Stéphane pour éviter des résolutions de noms trop lentes. Sinon, sinon ;-) On Mon, Apr 07, 2008 at 11:13:57PM +0200, Gaëtan PERRIER wrote: Je n'ai pas accès à la machine actuellement (pas avant demain) mais de mémoire je ne crois pas qu'il y ait files. Par ailleurs Stéphane dans sa réponse ne donne pas le même ordre (files dns nisplus) et toi (files nis dns). Est-ce que ça peut jouer? Gaëtan -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- IT Stuff on http://blog.mc-thias.org Thias -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Consulta sobre personalización de mensajes de mdadm en modo monitor
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hola! ¿Alguien conoce si es posible personalizar los mensajes provistos por la utilidad mdadm incorporada por Debian para el manejo de raid por software ante la ocurrencia de algún evento? Particularmente estoy intentando programar un script teniendo como base lo comentado en este [1] interesante artículo para recibir las notificaciones por medio de mensajes de texto. Pero quería consultarles si alguien conoce alguna manera de agregar alguna variable para indicar el dispositivo que falló también en el mensaje. Gracias anticipadas por responder. Saludos, Daniel [1] http://lopezivan.blogspot.com/2007/05/monitorizando-un-raid-en-linux-estado-y.html -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) iD8DBQFH+eowZpa/GxTmHTcRAuROAJ92C6jDOme1q05KgaF0FS48UrerWwCdHe6s sdNW93KoUK0wz9GSxtAKqQU= =IrXh -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Recomendación driver para Nvidia GFORCE 6600 LE
El Domingo 06 Abril 2008 20:22:30 José Manuel (EB8CXW) escribió: Hola a [EMAIL PROTECTED], Gracias por las respuestas, hice lo que me indicaron pare las X, y pude instalar Nvidia, pero ahora el problema que tengo es configurar xorg.conf, si le pongo nvidia en vez de nv, no puedo entrar en modo gráfico entro solo en modo consola, por lo que debo poner otra vez nv, y así si entra en modo gráfico. Seguiré indagando para ver como se puede configurar xorg.conf, para que funciones, y ya les diré. Reitero mi agradecimiento por la ayuda. Asimismo les pido disculpa, porque creo que en alguna de mis intervenciones se escapo el acuse de recibo. Mira lo único que se me ocurre es que eches mano que te ha dejado instalada el instalador de nvidia. Y que te centres en sección de opciones del xorg. /usr/share/doc/NVIDIA_GLX-1.0/html/appendix-b.html Yo tengo un xorg.conf un poco sugeneris... salseo mucho. Pero te puede ayudar como referencia. Besaburu, disculpa, cometí otro error mandándote el mensaje a tu privado. Discupas aceptadas :) a cualquiera nos pasa. Mi xorg.conf. Hay muchas cosas comentadas. algunas por que al alienarena no le gustan los dos monitores. Y otras por que las he dejado a medias o por que no quiero que arranquen, pero algun día quien sabe. # Bastu ver 1.22 [EMAIL PROTECTED] Section ServerLayout Identifier Default Layout Screen Screen0 InputDeviceConfigured Mouse InputDeviceGeneric Keyboard InputDeviceTouchpad # InputDeviceVaio keys Option AIGLX true Option StandbyTime 3 Option SuspendTime 5 Option OffTime 8 EndSection Section ServerFlags Option Xinerama 0 Option DefaultServerLayout Default Layout EndSection Section Files FontPath /usr/share/fonts/X11/misc FontPath /usr/share/fonts/X11/100dpi:unscaled FontPath /usr/share/fonts/X11/75dpi:unscaled FontPath /usr/share/fonts/X11/Type1 FontPath /var/lib/defoma/fontconfig.d FontPath /usr/local/share/fonts FontPath /usr/share/fonts/truetype EndSection Section Module Load i2c Load bitmap Load ddc Load extmod Load freetype Load glx Load int10 Load vbe Load dbe Load extmod EndSection Section Extensions Option Composite Enable EndSection Section InputDevice Identifier Generic Keyboard Driver kbd Option CoreKeyboard Option Protocol Standard Option XkbRules xorg Option XkbModel pc105 Option XkbLayout es Option CustomKeycodes off EndSection Section InputDevice Identifier Vaio keys Driver evdev Option Device /dev/input/event7 Option Name Sony Vaio Keys Option XkbLayout es Option XkbModel pc105 Option bustype 0010 Option vendor 104d Option version Option product EndSection Section InputDevice Identifier Configured Mouse Driver mouse Option CorePointer Option Device /dev/input/mouse0 Option Protocol ImPS/2 Option Emulate3Buttons false EndSection Section InputDevice Driver synaptics Identifier Touchpad Option Device/dev/input/mouse1 Option Protocol alps Option SHMConfigtrue Option SendCoreEvents true # For AlpsPS/2 ALPS GlidePoint # Option LeftEdge 130 # Option RightEdge 830 # Option TopEdge 120 # Option BottomEdge 650 # Option FingerLow 14 # Option FingerHigh 15 # Option MaxTapTime 180 # Option MinTapTime 110 # Option EmulateMidButtonTime 75 # Option VertScrollDelta 20 # Option HorizScrollDelta 20 # Option MinSpeed 0.3 # Option MaxSpeed 0.75 # Option AccelFactor 0.015 # Option EdgeMotionMinSpeed 200 # Option EdgeMotionMaxSpeed 200 # Option UpDownScrolling 1 # Option CircularScrolling 1 # Option CircScrollDelta 0.1 # Option CircScrollTrigger 3 # Option VertTwoFingerScroll 1 EndSection Section Device Identifier Nvidia0 Driver nvidia VendorName NVIDIA Corporation BoardName GeForce Go 7600 Screen 0 EndSection Section Monitor Identifier Monitor0 VendorName Sony ModelName Nvidia Default Flat Panel HorizSync 29.0 - 49.0 VertRefresh0.0 - 60.0 Option DPMS true EndSection Section Screen Identifier Screen0 Device Nvidia0 MonitorMonitor0 DefaultDepth 24 Option
Re: Recomendación driver para Nvidia GFORCE 6600 LE
te remomiendo que hagas lo siguiente ya que xorg es medio lrgo #dpkg-reconfigure xserver-xorg como root ahi te salen las opciones de configuracion vidio monitor me parece (creo) que el problema es el monitor, fijate bien los modes de video primero hacete un backup del xorg #cp xorg.conf xorg.conf.bk -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Problemas con streaming de radio destras de firewall
Hola chicos: Les comento mi problema, instale un ubuntu 7.10, le instale como servidor de streaming el icescast2, y como cliente el ices2, resulta que para probarlo lo tuve 3 meses con una ip publica y anduvo bien, pero ahora al querer ponerlo detras de un firewall, no tengo forma de hacerlo andar, lo extranio es que tengo otros servidores que dan servicio web detras del firewall y el nateo lo hacen bien, este programa usa el puerto 8000 tcp, lo tengo abierto pero igual no puedo hacerlo andar, alguien sabe si hay que configurar algo especial con este programa, besos Tarjeta de crédito Yahoo! de Banco Supervielle. Solicitá tu nueva Tarjeta de crédito. De tu PC directo a tu casa. www.tuprimeratarjeta.com.ar -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Saludos
Hola amigos. Por favor necesito que me echen una mano, porque he estado trabajando por primera vez con ldap y cometi un error que me ha costado dolores de cabeza, se cancelo la instacion de abruptamente y resulta que tengo el siguiente error: apt-get install slapd ldap-utils Leyendo lista de paquetes... Hecho Creando árbol de dependencias... Hecho ldap-utils ya está en su versión más reciente. Se instalarán los siguientes paquetes extras: libiodbc2 libltdl3 Los siguientes paquetes se ELIMINARÁN: phpldapadmin Se instalarán los siguientes paquetes NUEVOS: libiodbc2 libltdl3 Se actualizarán los siguientes paquetes: slapd 1 actualizados, 2 se instalarán, 1 para eliminar y 0 no actualizados. 2 no instalados del todo o eliminados. debconf: DbDriver config: /var/cache/debconf/config.dat is locked by another process (Leyendo la base de datos ... dpkg: aviso importante: falta el fichero de lista de ficheros del paquete `slapd', se supondrá que el paquete no tiene ningún fichero actualmente instalado. 71552 ficheros y directorios instalados actualmente.) Desinstalando phpldapadmin ... debconf: DbDriver config: /var/cache/debconf/config.dat is locked by another process dpkg: error al procesar phpldapadmin (--remove): el subproceso post-removal script devolvió el código de salida de error 1 Se encontraron errores al procesar: phpldapadmin E: Sub-process /usr/bin/dpkg returned an error code (1) Por favor pueden ayudarme en esto para poder instalar o desintalar el paquete Gracias -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
hostap-utils: hostap_cs.conf desaparece en lenny
Hola, resulta que me he puesto a configurar mi vieja pero cojonuda SMC2531W en lenny y cual es mi sorpresa que tras instalar hostap-utils no tengo en /etc/pcmcia el hostap_cs.conf, es mas, no hay nada en /etc/pcmcia excepto un archivo con algo de configuracion de los puertos (config.opts). En el paquete de etch si que esta, he estado leyendo la documentacion del paquete y no dice nada. Ha cambiado el sistema de las pccard en lenny? corro el kernel 2.6.18-5. saludos. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Ayuda con Samba
Colegas yo monte un server samba sola para compartir documentos, nunca me habia dado errores pero despues q instale Etch r3 cuando creo la cuenta de usuario para q pueda acceder al recurso compartido este no me crea el fichero smbpass.conf por lo q cuando un cliente windows intenta acceder le pide user y pass pero ponerlos es como si no reconociera este, no se q hacer, yo he realizado la misma tarea en Knoppix y CentOS por lo q ahora no se cual sera el error, samba lo instale por default en la primera instalacion y el parametro q utilizo en el smb.conf es share = user pero de nada esto me sirve. Espero respuesta gracias de antemano salu2+ fide -- _ Admin. de Red Fidel Domínguez Valero GNU/LINUX User #433411
Re: Ayuda con Samba
On Mon, 2008-04-07 at 14:29 -0500, Fidel Domínguez Valero wrote: Colegas yo monte un server samba sola para compartir documentos, nunca me habia dado errores pero despues q instale Etch r3 cuando creo la cuenta de usuario para q pueda acceder al recurso compartido este no me crea el fichero smbpass.conf por lo q cuando un cliente windows intenta acceder le pide user y pass pero ponerlos es como si no reconociera este, no se q hacer, yo he realizado la misma tarea en Knoppix y CentOS por lo q ahora no se cual sera el error, samba lo instale por default en la primera instalacion y el parametro q utilizo en el smb.conf es share = user pero de nada esto me sirve. Espero respuesta Espero que leas mas man smb.conf [datos] comment = All Data path = /mnt/datos public = no writable = yes create mode = 0755 write list = marcel $ smbpassword -a marcel marcel es un usuario de la PC gracias de antemano De Nada -- Marcel Sánchez Góngora Debian Lenny GNU/Linux Linux User #382151 Est. IV año Universidad de las Ciencias Informáticas Mañana te darás cuenta que hoy no sabes nada signature.asc Description: This is a digitally signed message part
Re: Compilando squid 2.6 desde las fuentes
El dom, 06-04-2008 a las 23:46 -0300, ciracusa escribió: Buenas grupo: He compilado desde las fuentes de squid la versión 2.6.STABLE 18 como sigue (para poder autenticarme contra un ActiveDirectory): # ./configure --prefix /usr --exec_prefix /usr --bindir /usr/sbin --sbindir /usr/sbin --libexecdir /usr/lib/squid --sysconfdir /etc/squid --localstatedir /var/spool/squid --datadir /usr/share/squid --enable-follow-x-forwarded-for --enable-linux-netfilter --enable-async-io --enable-storeio=aufs --enable-arp-acl --enable-removal-policies=lru,heap --enable-snmp --enable-delay-pools --enable-htcp --enable-poll --enable-cache-digests --enable-underscores --enable-referer-log --enable-useragent-log --enable-carp --enable-large-files --enable-auth=basic,ntlm --enable-basic-auth-helpers=LDAP,NCSA,PAM,SMB,MSNT --enable-ntlm-auth-helpers=SMB,fakeauth --enable-external-acl-helpers=ip_user,ldap_group,unix_group,wbinfo_group La cuestión es que no logró poder autenticarme satisfactoriamente, y por ende poder navegar (aclaro que he ingresado el usuario y password correcto). Lo raro es lo siguiente: 1) Pido la pagina www.google.com 2) El navegador me presenta el cuadro para poder validarme: (aquí es donde no logro poder autenticarme exitosamente) pero si miro el access.log de squid veo que la pagina ha sido rechazada, ahora en el access.log de dansguardian (quien es a quien apunta mi navegador no aparece nada)? Digo, si mi navegador apuanta a Dansguardian, y a su vez, este apunta al log de squid, porque en los log solo se registra en el de squid? Alguna pista con respecto a la autenticacion? Yo estoy utilizando el squid de etch con autenticacion ntlm sin problemas en el cuadro de autenticacion pones DOMINIO\usuario ?? Muchas Gracias. Saludos. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Problemas con streaming de radio destras de firewall
El lun, 07-04-2008 a las 14:32 -0300, Nora Lineros escribió: Hola chicos: Les comento mi problema, instale un ubuntu 7.10, le instale como servidor de streaming el icescast2, y como cliente el ices2, resulta que para probarlo lo tuve 3 meses con una ip publica y anduvo bien, pero ahora al querer ponerlo detras de un firewall, no tengo forma de hacerlo andar, lo extranio es que tengo otros servidores que dan servicio web detras del firewall y el nateo lo hacen bien, este programa usa el puerto 8000 tcp, lo tengo abierto pero igual no puedo hacerlo andar, alguien sabe si hay que configurar algo especial con este programa, besos No es por nada en especial, pero esto es una lista de debian Deberias canalizar tu pregunta por una de Ubuntu Gracias por respetar las normas de la lista Tarjeta de crédito Yahoo! de Banco Supervielle. Solicitá tu nueva Tarjeta de crédito. De tu PC directo a tu casa. www.tuprimeratarjeta.com.ar -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Restablecer nombre de usuario
El sáb, 05-04-2008 a las 21:25 -0300, [EMAIL PROTECTED] escribió: mi mail es [EMAIL PROTECTED] el mio no :) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Sobre fingerprints de ssh
Hola Lista. Donde se guarda el fingerprint de cada server al cual me conecto por ssh? Muchas Gracias. Salu2. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Sobre fingerprints de ssh
--- Leonardo E. Dodorico [EMAIL PROTECTED] escribió: Hola Lista. Donde se guarda el fingerprint de cada server al cual me conecto por ssh? Muchas Gracias. Salu2. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] ** Buenas tardes, cada fingerprints se guarda dentro de la carpeta oculta .ssh/known_hosts del usuario con que te conectastes, es decir, si te conectastes con el usuario leonardo el fingerprints deberà estar en /home/leonardo/.ssh/known_hosts. Saludos, Atentamente Rafael Urbina G. Caracas - Venezuela Linux User # 434786 ¡Capacidad ilimitada de almacenamiento en tu correo! No te preocupes más por el espacio de tu cuenta con Correo Yahoo!: http://correo.espanol.yahoo.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: asegurando un server y ssh
El dom, 06-04-2008 a las 19:36 -0300, ciracusa escribió: angel wrote: El vie, 04-04-2008 a las 21:20 -0300, ciracusa escribió: Hola lista. - Que les parece mejor, manejar ssh asegurandolo con tcpwrapper (modificando /etc/inetd.conf) o controlar quienes acceden al server mediante iptables? - Alguien ha visto algún doc o guía que sirva para asegurar un server desde el momento de su instalación? Yo he encontrado dos [1] [2] las cuales estoy siguiendo, pero si alguien tiene alguna otra desde ya agradecido! Muchas Gracias. [1] http://www.linux-os.com.ar/linuxos/seguridad-en-linux-y-debian/ [2] http://www.guimi.net/index.php?pag_id=tec-docs/postinstalacion_debian.html Permiti solo el acceso a traves de pares de claves publica/privada y olvidate Como? :) Muchas Gracias. Por favor responde a la Lista, que yo la leo En la web tenes muchos instructivos sobre el uso de pares de clave publica/privada una simple busqueda en gogle me trajo esto ( y 12296 links mas) http://fferrer.dsic.upv.es/cursos/Linux/Avanzado/HTML/ch09s04.html http://crysol.inf-cr.uclm.es/node/6 http://b52net.blogspot.com/2004/05/autenticacin-con-clave-pblica-en-ssh.html http://bulma.net/body.phtml?nIdNoticia=2190 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Log de squid no esta en /var/log/messages
Buenas lista. En algunas distros haciendo un tail -f /var/log/messages puede verse el motivo por el cual squid se cierra, ahora en lenny no es así? A que se debe esto?¿ Gracias! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: VPN ssh IPSec, Debian- Win Server.
El vie, 04-04-2008 a las 16:51 -0700, francisco escribió: Hola En el lugar adonde yo vivo, es comun encontrar coneccion inalambrica gratuita con el inconveniente de que toda comunicacion puede facilmente ser interceptada. Uso una portatil con Debian Testing y me gustaria que mis conecciones a esas redes fueran privadas. He revisado las VPN, IPSec y SSH; pero aun no entiendo como y que usar en mi portatil con Debian, para conectarme a los APs con Windowses. Encuentro mucha informacion para hacerlo al revez. Se puede hacer? Que paquetes utilizar? Como se hace? Gracias por su atencion y hasta pronto. Agrego informacion: He jugado un poco con Slackware Wifi, para auditorias inalambricas y veo que se puede asegurar conecciones con redes y maquinas definidas. Pero para el caso de conecciones casuales con AP cualquiera en modo abierto; pues todavia no hay una forma de asegurar la coneccion, o por lo menos yo no he encontrado. Lo que yo solicito de la lista, es si alguno conoce algun paquete en Debian, para asegurar conecciones de este tipo; en el lugar adonde vivo actualmente, en los cafes y bibliotecas y en muchos hogares, los AP son abiertos y sin clave; cualquiera que tenga una laptop puede conectarse a esa red. Los AP, son windows o ruteadores comunes y muchos ni siquiera tienen para conecciones VPN. Gracias por su atencion. PD: Si estuviese perdido con algunos conceptos; agradeceria la correccion! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: hostap-utils: hostap_cs.conf desaparece en lenny
El lun, 07-04-2008 a las 20:05 +0200, Arrecio escribió: Hola, resulta que me he puesto a configurar mi vieja pero cojonuda SMC2531W en lenny y cual es mi sorpresa que tras instalar hostap-utils no tengo en /etc/pcmcia el hostap_cs.conf, es mas, no hay nada en /etc/pcmcia excepto un archivo con algo de configuracion de los puertos (config.opts). En el paquete de etch si que esta, he estado leyendo la documentacion del paquete y no dice nada. Ha cambiado el sistema de las pccard en lenny? corro el kernel 2.6.18-5. saludos. Yo tengo una Broadcom con nucleo 2.6.24.1 y me cambi el modulo de bcm43xx a b43; tuve que reinstalar el firmware. Y tambien al reconocer las tarjetas; antes la reconocia como eth0 y ahora como wlan0, ademas aparece una algo extrana que no afecta en nada. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: problema con proxi transparente
2008/4/4, adrian [EMAIL PROTECTED]: Perdon Marco, si indicas que utilizas squid, asi que vale la aclaracion Adrian 2008/4/4, Adrian Gabriel Jaszczyszyn [EMAIL PROTECTED]: Marco: No indicas que proxy utilizas Supongo que tienes un squid como proxy,y por default te escucha por el puerto 3128 Lo que tienes que hacer es un nat para que todas las peticiones que vayan a un puerto 80 las redirija al puerto del proxy (por defecto 3128) iptables -t nat -A PREROUTING -s $NUESTRA_RED -p tcp --dport 80 -j REDIRECT --to-port 3128 salu2, Adrián -Original Message- From: ramirex [EMAIL PROTECTED] To: Marco Rodriguez [EMAIL PROTECTED] Cc: Debian Lista de Usuarios debian-user-spanish@lists.debian.org Date: Fri, 4 Apr 2008 16:02:37 -0400 Subject: Re: problema con proxi transparente como sabes, que este script se esta ejecutando. para mi la mejor forma es separar el script y ejecutarlo. y ponte mensajes para saber si es que esta correndo saludos On Fri, Apr 4, 2008 at 2:15 PM, Marco Rodriguez [EMAIL PROTECTED] wrote: Hola a todos he estado intentando configurar un proxi transparente y he seguido las indicaciones al pie de la letra en cuanto al uso de iptables pero no funciona, quisiera saber si hay algo más que configurar aparte de iptables. Estoy trabajando con el debian, version estable, ya instale mi squid y he probado el acceso desde otra maquina como un proxi normal y funciona, pero cuando intento hacerlo de forma transparente falla.he buscado muchas ayudas en internet y todas me dicen lo mismo. mi scrip es el siguiente: #!/bin/sh ## SCRIP de IPTABLES echo -n Aplicando reglas de Firewall... ## FLUSH de reglas echo 1 /proc/sys/net/ipv4/ip_forward iptables -F iptables -X iptables -Z iptables -t nat -F ## Establecemos politicas por Defecto iptables -P INPUT ACCEPT iptables -P OUTPUT ACCEPT iptables -P FORWARD ACCEPT iptables -t nat -P PREROUTING ACCEPT iptables -t nat -P POSTROUTING ACCEPT ## Empezamos a filtrar # eth0 nic conectada al recter # eth1 nic conectada a la LAN # Dejamos el localhost iptables -A INPUT -i lo -j ACCEPT # Al firewall tenemos acceso desde la red local iptables -A INPUT -s 192.168.2.0/24 -i eth1 -j ACCEPT # Ahora hacemos enmascaramiento de la red local y activamos # el bit de FORWARDING iptables -t nat -A POSTROUTING -s 192.168.2.0/24 -o eth0 -j MASQUERADE # cerramos los accesos indeseados de la calle #iptables -A INPUT -s 0.0.0.0/0 -p tcp --dport 1:1024 -j DROP #iptables -A INPUT -s 0.0.0.0/0 -p udp --dport 1:1024 -j DROP #iptables -A INPUT -s 0.0.0.0/0 -p tcp --dport 1 -j DROP echo Ok. ahora verifica con iptables -L -n # Fin gracias de antemano por sus sugerencias. _ Blog your life in 3D with Windows Live Writer. http://www.windowslive.com/overview.html?ocid=TXT_TAGLM_Wave2_wl_writer _022008 -- --- ramirex - [powered by Linux] - weblog: http://ajayu.memi.umss.edu.bo/ramirex/ GPG Key ID: F36F6F8C -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] Y el proxy saves si esta andando bien ? para probarlo te conectas directamente con un navegador configurados con salida a proxy ip_proxy puerto 3128 Por que por defecto en algunas distro viene bloqueado -- MrIX Linux user number 412793. http://counter.li.org/ las grandes obras, las sueñan los santos locos, las realizan los luchadores natos, las aprovechan los felices cuerdo, y las critican los inútiles crónicos, yo no fui, seguro que es mas inteligente.
Re: OT: Modem USB Huawei E220
El 6/04/08, Constructora.pando Pando [EMAIL PROTECTED] escribió: 2007/5/28 Pedro Jiménez [EMAIL PROTECTED]: Hola a todos, quiero poner el Modem USB Huawei E220 de Movistar y quería saber qué soporte tiene debian para este tipo de módem. Otra pregunta, sólo quiero internet para ver el correo un rato en casa, porque en el curro estoy todo el día,y hacer un curso on-line. ¿ Tengo suficiente con 10 Mb de límite de descarga por día ?, muchas gracias y perdón por el OT http://pomelo.clan-ec.com.ar/2008/01/instalar-modem-huawei-en-debian.html No quiero desanimarte peroo el modem de la pregunta es un modem 3g y el del tutorial es un adsl che buenisimo la respuesta del modem! yo use este tutorial no es el usb pero sirve igual http://tlab.org/index.php?page=huawei-e620-3g-pcmcia-data-card-with-telia-in-ubuntu-linux -- -- AlePando http://panduro.blogspot.com -- MrIX Linux user number 412793. http://counter.li.org/ las grandes obras, las sueñan los santos locos, las realizan los luchadores natos, las aprovechan los felices cuerdo, y las critican los inútiles crónicos, yo no fui, seguro que es mas inteligente.
Re: OT: Modem USB Huawei E220
2008/4/7 Cristian Mitchell [EMAIL PROTECTED]: El 6/04/08, Constructora.pando Pando [EMAIL PROTECTED] escribió: 2007/5/28 Pedro Jiménez [EMAIL PROTECTED]: Hola a todos, quiero poner el Modem USB Huawei E220 de Movistar y quería saber qué soporte tiene debian para este tipo de módem. Otra pregunta, sólo quiero internet para ver el correo un rato en casa, porque en el curro estoy todo el día,y hacer un curso on-line. ¿ Tengo suficiente con 10 Mb de límite de descarga por día ?, muchas gracias y perdón por el OT http://pomelo.clan-ec.com.ar/2008/01/instalar-modem-huawei-en-debian.html No quiero desanimarte peroo el modem de la pregunta es un modem 3g y el del tutorial es un adsl che buenisimo la respuesta del modem! yo use este tutorial no es el usb pero sirve igual http://tlab.org/index.php?page=huawei-e620-3g-pcmcia-data-card-with-telia-in-ubuntu-linux También está este tutorial: http://oozie.fm.interia.pl/pro/huawei-e220/ Hice ya un intento y debian, como lo dijeron ya en una respuesta, trae ya los modulos necesarios y el tutorial que enlace en mi mail anterior tiene un metodo muy parecido al usado para instalar el modem de telefonica El enlace que tu das y este nuevo que aporto tiene las mismos valores de configuracion que analice en windows A ver si mañana con tiempo hago otro intento y lo comparto aca -- -- AlePando http://panduro.blogspot.com -- MrIX Linux user number 412793. http://counter.li.org/ las grandes obras, las sueñan los santos locos, las realizan los luchadores natos, las aprovechan los felices cuerdo, y las critican los inútiles crónicos, yo no fui, seguro que es mas inteligente. -- -- AlePando http://panduro.blogspot.com
SSH sin conexion
Hola lista: Cuando instale mi Debian etch 4 AMD64 segui un tutorial el cual ya no encuentro para mejorar la seguridad de mi sistema. jeje.. ahora tengo la necesidad de conectarme a el servidor de mi taller, pero cuando quiero acceder al parecer me rechaza la conexion. :~$ ssh [EMAIL PROTECTED] ssh: connect to host dominio.mx port 1984: Connection timed out :~$ ssh -l rogelio -D dominio.mx:22 Privileged ports can only be forwarded by root. Se que tengo que leer el manual, pero es que no entiendo ;( Alguien me puede guiar, estoy leyendo el man ssh, y si hay otros comandos para detectar mi problema. Gracias :) Att.Roger -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: SSH sin conexion
Rogelio escribió: Hola lista: Cuando instale mi Debian etch 4 AMD64 segui un tutorial el cual ya no encuentro para mejorar la seguridad de mi sistema. jeje.. ahora tengo la necesidad de conectarme a el servidor de mi taller, pero cuando quiero acceder al parecer me rechaza la conexion. :~$ ssh [EMAIL PROTECTED] ssh: connect to host dominio.mx port 1984: Connection timed out :~$ ssh -l rogelio -D dominio.mx:22 Privileged ports can only be forwarded by root. Se que tengo que leer el manual, pero es que no entiendo ;( Alguien me puede guiar, estoy leyendo el man ssh, y si hay otros comandos para detectar mi problema. Gracias :) Att.Roger te esta diciendo que solo puedes acceder como root al puerto ssh probaste como root? deberias darle permisos a tu usuario si quieres conectarte como usuario normal saludos -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Debian etch com horário correto, windows doido....
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 03-04-2008 18:17, Saul Lima wrote: Fiz uma instalação básica do Etch, sob a qual fui instalado o KDE, KDM e apenas os aplicativos que necessitava, mas agora estou notando que apesar do horário no Etch estar correto, no windows ele está adiantado muitas horas Ainda não entendi o porquê... Em versões antigas do ubuntu isso acontecia quando, na inicialização, o relógio era acertado automaticamente pelo ntpdate, mas olhando aqui, eu nem tenho o ntpdate instalado O que pode estar acontencendo? O Janelão acha que seu computador é mono-SO e que sua BIOS não pode estar regulada para um Fuso Horário diferente do que você vive, então ele usa o relógio da BIOS como hora local. No Debian, você pode configurar a BIOS para ser UTC e ajustar o sistema para a hora local, o que geralmente dá 3 horas de diferença (estamos em UTC-0300). Quando você faz dual-boot com Janelão, é melhor dizer para o Debian que seu relógio não é UTC, assim, a hora da BIOS é tomada como hora local e você não fica com a diferença de horários entre os dois sistemas. :) Abraço, - -- Felipe Augusto van de Wiel (faw) Debian. Freedom to code. Code to freedom! -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFH+jmACjAO0JDlykYRAq+YAJ9HBTdmyxMkZKiteQU9L/NM2rUpYQCgiazM 0LTfpgCZixkCaDy3XdrPX0s= =IQet -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Wireless com Chipset Atheros(D-Link G520)
Olá Pessoal a lista, Estou com um problema em uma placa D-Link G520 chipset Atheros. Com a versão do etch funciona que é uma beleza, mas, com a versão testing nada. Não consigo levantar a mesma, alguém já passou por este problema? Agradeço a ajuda!! Dennis -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: openoffice X KDE X acentuação
Ronaldo Reis Junior escreveu: Em Qua 05 Mar 2008, Ronaldo Reis Junior escreveu: Pessoal, quando tenho um arquivo acentuado no konqueror e clico nele para abrir com o openoffice ele abre normalmente. Mas se já estou com um arquivo aberto e clico em outro arquivo, também acentuado, o arquivo não abre e diz que o mesmo não foi encontrado e no lugar dos caracteres acentuados aparece uma ?. Isto só acontece quando uso clicar em um arquivo via algum gerenciador de arquivos do KDE. Se abro diretamente pelo openoffice ou pelo terminal não tem problema. O que pode ser isto? Valeu Inte Ronaldo Pessoal, continuo com este problema. Já procurei no google e não encontrei nada específico. Isto está complicando muito o uso em alguns computadores onde pessoas com pouca informação deixam de abrir arquivos achando que está com problema. Obviamente se abrir via openoffice tudo funciona, mas o normal é as pessoas clicarem no arquivo para abrir. Já falei para não colocar acentos, mas isto não resolve. Todas as outras aplicações funcionam normalmente, isto é um birra do openoffice com o kde. kde 3.5.8 Broffice 2.3.1-5 Olá, Por aqui uso OpenOffice, e tudo funciona corretamente. kde 3.5.8 OpenOffice.org-2.3.1-5 Alguma dica? Algum parâmetro a ser colocado nos arquivos .desktop do kde? Não sei por onde começar, mas me coloco à disposição para testes. Abraço, -- Gunther Furtado [EMAIL PROTECTED] Curitiba - PR - Brasil
Re: openoffice X KDE X acentuação
Em Seg 07 Abr 2008, Gunther Furtado escreveu: Ronaldo Reis Junior escreveu: Em Qua 05 Mar 2008, Ronaldo Reis Junior escreveu: Pessoal, quando tenho um arquivo acentuado no konqueror e clico nele para abrir com o openoffice ele abre normalmente. Mas se já estou com um arquivo aberto e clico em outro arquivo, também acentuado, o arquivo não abre e diz que o mesmo não foi encontrado e no lugar dos caracteres acentuados aparece uma ?. Isto só acontece quando uso clicar em um arquivo via algum gerenciador de arquivos do KDE. Se abro diretamente pelo openoffice ou pelo terminal não tem problema. O que pode ser isto? Valeu Inte Ronaldo Pessoal, continuo com este problema. Já procurei no google e não encontrei nada específico. Isto está complicando muito o uso em alguns computadores onde pessoas com pouca informação deixam de abrir arquivos achando que está com problema. Obviamente se abrir via openoffice tudo funciona, mas o normal é as pessoas clicarem no arquivo para abrir. Já falei para não colocar acentos, mas isto não resolve. Todas as outras aplicações funcionam normalmente, isto é um birra do openoffice com o kde. kde 3.5.8 Broffice 2.3.1-5 Olá, Por aqui uso OpenOffice, e tudo funciona corretamente. kde 3.5.8 OpenOffice.org-2.3.1-5 Alguma dica? Algum parâmetro a ser colocado nos arquivos .desktop do kde? Não sei por onde começar, mas me coloco à disposição para testes. Abraço, Pessoal, realmente não sei qual é o problema, mas descobri que o problema é com o pacote empacotado no Debian. Hoje peguei o BROffice empacotado em DEB pelo pessoal do BROffice, desinstalei a versão debian e instalei a versão extra-oficial do BROffice e tudo funcionou perfeitamente, não há mais este problema. Vou relatar isto para o mantenedor do OO no debian. Inte Ronaldo -- Cursei uma faculdade. Consegui educação para mim e um diploma para minha mãe. -- Prof. Ronaldo Reis Júnior | .''`. UNIMONTES/Depto. Biologia Geral/Lab. de Biologia Computacional | : :' : Campus Universitário Prof. Darcy Ribeiro, Vila Mauricéia | `. `'` CP: 126, CEP: 39401-089, Montes Claros - MG - Brasil | `- Fone: (38) 3229-8187 | [EMAIL PROTECTED] | [EMAIL PROTECTED] | http://www.ppgcb.unimontes.br/ | ICQ#: 5692561 | LinuxUser#: 205366 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
[0FF-TOPIC] Cabo serial para roteador Cyclades NL1000
Caros, Recorro a vocês pois não consigo encontrar nada que posso me ajudar no google. (ou estou fazendo a busca errada) Preciso do cabo serial para roteador Cyclades NL1000. Alguém sabe onde consigo comprar? Obrigado -- Rodolfo Barbosa Lunar Consultoria -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [0FF-TOPIC] Cabo serial para roteador Cyclades NL1000
Tente ligar na Casa dos Roteadores em SP: http://www.casadosroteadores.com.br/ Abraços! 2008/4/7, Rodolfo Barbosa [EMAIL PROTECTED]: Caros, Recorro a vocês pois não consigo encontrar nada que posso me ajudar no google. (ou estou fazendo a busca errada) Preciso do cabo serial para roteador Cyclades NL1000. Alguém sabe onde consigo comprar? Obrigado -- Rodolfo Barbosa Lunar Consultoria -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- ThOLOko ThOmaz BeLgine -FrEEBSD- UniX TeaM (LeT's MaKe InStaLL ClEan)
Re: Debian etch com horário correto, windows doido....
E como fazer isso? Aff... quase não uso meu windows, mas preciso da hora certa pq edito vídeos lá... Como faço para ajustar o relógio do debian de forma que ele não use o UTC? Em 07/04/08, Felipe Augusto van de Wiel (faw) [EMAIL PROTECTED] escreveu: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 03-04-2008 18:17, Saul Lima wrote: Fiz uma instalação básica do Etch, sob a qual fui instalado o KDE, KDM e apenas os aplicativos que necessitava, mas agora estou notando que apesar do horário no Etch estar correto, no windows ele está adiantado muitas horas Ainda não entendi o porquê... Em versões antigas do ubuntu isso acontecia quando, na inicialização, o relógio era acertado automaticamente pelo ntpdate, mas olhando aqui, eu nem tenho o ntpdate instalado O que pode estar acontencendo? O Janelão acha que seu computador é mono-SO e que sua BIOS não pode estar regulada para um Fuso Horário diferente do que você vive, então ele usa o relógio da BIOS como hora local. No Debian, você pode configurar a BIOS para ser UTC e ajustar o sistema para a hora local, o que geralmente dá 3 horas de diferença (estamos em UTC-0300). Quando você faz dual-boot com Janelão, é melhor dizer para o Debian que seu relógio não é UTC, assim, a hora da BIOS é tomada como hora local e você não fica com a diferença de horários entre os dois sistemas. :) Abraço, - -- Felipe Augusto van de Wiel (faw) Debian. Freedom to code. Code to freedom! -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFH+jmACjAO0JDlykYRAq+YAJ9HBTdmyxMkZKiteQU9L/NM2rUpYQCgiazM 0LTfpgCZixkCaDy3XdrPX0s= =IQet -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Debian etch com horário correto, wind ows doido....
Saul Lima escreveu: E como fazer isso? Aff... quase não uso meu windows, mas preciso da hora certa pq edito vídeos lá... Como faço para ajustar o relógio do debian de forma que ele não use o UTC? Você pode editar o arquivo /etc/default/rcS, colocando UTC=no. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [Bulk] Re: Debian etch com horário corret o, windows doido....
# dpkg-reconfigure tzdata No menu, vai em etc, depois em GMT ou UTC 0. Saul Lima escreveu: E como fazer isso? Aff... quase não uso meu windows, mas preciso da hora certa pq edito vídeos lá... Como faço para ajustar o relógio do debian de forma que ele não use o UTC? Em 07/04/08, *Felipe Augusto van de Wiel (faw)* [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] escreveu: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 03-04-2008 18:17, Saul Lima wrote: Fiz uma instalação básica do Etch, sob a qual fui instalado o KDE, KDM e apenas os aplicativos que necessitava, mas agora estou notando que apesar do horário no Etch estar correto, no windows ele está adiantado muitas horas Ainda não entendi o porquê... Em versões antigas do ubuntu isso acontecia quando, na inicialização, o relógio era acertado automaticamente pelo ntpdate, mas olhando aqui, eu nem tenho o ntpdate instalado O que pode estar acontencendo? O Janelão acha que seu computador é mono-SO e que sua BIOS não pode estar regulada para um Fuso Horário diferente do que você vive, então ele usa o relógio da BIOS como hora local. No Debian, você pode configurar a BIOS para ser UTC e ajustar o sistema para a hora local, o que geralmente dá 3 horas de diferença (estamos em UTC-0300). Quando você faz dual-boot com Janelão, é melhor dizer para o Debian que seu relógio não é UTC, assim, a hora da BIOS é tomada como hora local e você não fica com a diferença de horários entre os dois sistemas. :) Abraço, - -- Felipe Augusto van de Wiel (faw) Debian. Freedom to code. Code to freedom! -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFH+jmACjAO0JDlykYRAq+YAJ9HBTdmyxMkZKiteQU9L/NM2rUpYQCgiazM 0LTfpgCZixkCaDy3XdrPX0s= =IQet -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Yanıt: debian web server
1-)noip.com sitesinden falcoornek.no-ip.com gibi bir hesap acilmali ve programi indirilmelidir; Basit bir daemon program ne zaman Int.Saglayici tarafindan IP adresiniz degisse no-ip.com bu degisikligi nameserver olarak dışarı yansitiyor. Böylece dinamik IP sorunu cozulmus oluyor. 2-) /etc/hosts dosyasına 127.0.0.1 falcoornek.no-ip.com satirini girin. veya 127.0.0.1 in devamina ekleyiverin. 3-) Modeminizin web arayüzüne girip ya da komut kismindan 80 no lu hem TCP hem de UDP paketlerini kendi bilgisayarinizin Yerel ag IP adresine yönlendirin (Benim modemde - Configuration- Virtual Server) Ornek: 80 portunu TCP olarak-- 10.0.0.7 80 portunu UDP olarak-- 10.0.0.7 seklinde yonlendirin. 4-) Apache sunucunuzu kurduktan sonra tarayicinizla adres cubuguna 127.0.0.1 yazip test edin. Apache 2 test sayfasi goruntulenecektir) 5-) Eger localhost olarak aciyorsa ve adim 1-3 e kadar dogru bir sekilde yaptiysaniz disaridan da ayni test sayfasini (adim 4 teki gibi) goruntuleyebiliyor olmalisiniz. www.sureproxy.com gibi bir vekil sunucu sitesine girip sitenizi disaridan test edin. vekil sitede falcoornek.no-ip.com adresini girince ayni test sayfasini acacaktir. 6-) Test sayfasini degistirin. Ön tanımlı olarak gosterilen sayfa aslinda /var/www/ altinda veya benzer bir yerde olmali. Eger yerini degistirmek istiyorsaniz /etc/apache2/sites-available/default dosyasini duzenlemeniz lazim. bunun icin http://www.debian-administration.org/articles/412 adimlarini takip edin. Saygılar, Engin YILMAZ ___ Yahoo! kullaniyor musunuz? http://tr.mail.yahoo.com Istenmeyen postadan biktiniz mi? Istenmeyen postadan en iyi korunma Yahoo! Posta'da -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Evolution: Inserting image into signature block [SOLVED]
Ron Johnson wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 04/06/08 14:37, andy wrote: andy wrote: Hello I am needing some assistance please on inserting images into an Evolution outgoing email signature block. This concerns Evolution 2.6.3. running on a GNU/Linux Debian Etch platform. [snip] I would appreciate any help that list users could offer in rectifying this matter, as the options to the signature function do not seem very extensive to do the trick. TIA Andy Have found a workaround for this. I copied the desired signature block into OO.o, exported it to a pdf, selected the images and text, copied that into Gimp, and scaled and cropped the image, saved it and then inserted that into Evolution's signature area as an image. It now works just fine. The only drawback is if anyone's email filter quarantines image attachments, then it will get blocked, but other than that it ticks all of the right boxes. This appears to be either a bug or a lack-of-feature in (that version of?) Evo. - -- Ron Johnson, Jr. Jefferson LA USA Possibly Ron. It did seem to be a contradictory state of affairs - allow one image to be embedded but not a second. Oh well - at least this also partially satisfies some netiquette because this will now be an attachment for anyone who (like myself and many others here, I'm sure) don't automatically allow HTML emails. So, maybe not a bad thing. A -- If they can get you asking the wrong questions, they don't have to worry about the answers. - Thomas Pynchon, Gravity's Rainbow
Re: error while loading shared libraries: libstdc++.so.5
Haines Brown wrote: This a common error message, but a search on line didn't resolve it. I'm running debian etch. I installed an application, gmfsk, deb, which went fine. But when I go to run it, I get, as either root or user: gmfsk: error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory apt-file search libstdc++.so.5 and install the corresponding package. The application uses libstdc++6 = 4.1.0, but the error suggests it is turning instead to libstdc++.so.5. What is the application you are talking about? How are you sure it uses only libstdc++6? Is libstdc++6 installed on your machine? raju -- Kamaraju S Kusumanchi http://www.people.cornell.edu/pages/kk288/ http://malayamaarutham.blogspot.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Remove package from apt's db
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 NN_il_Confusionario wrote: On Mon, Apr 07, 2008 at 11:47:44AM +1000, Rich Healey wrote: I've installed skype, had to force it to ignore dependencies (long story.. anyway, i do have qt4's libs, and skype does work) I would NOT remove skype from the dpkg database /var/lib/dpkg/status I would use equivs (or manual editing of /var/lib/dpkg/status /var/lib/dpkg/info/$PAKAGENAME.list , but you must _exactly_ know what you are doing) to say that dependencies are installed. In desperate case where dependencies are wrongly declared (like installing opera on sarge) a manual editing of /var/lib/dpkg/status to correctly declare the dependencies makes sense. I _DO_ know what i'm doing (not arrogance or anger). I'm used to building systems from scratch, I have _A_ set of qt libs, and skype works fine, it's just not the set that apt feels i should have. Kind Regards Rich Healey -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFH+cNVLeTfO4yBSAcRAi9zAJ9193mQ59DKgepcG5gZz6/1/TwvEwCghR+F vmd6s1iBOdwIlbV2C0Uwmwc= =Q611 -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PTP camera, setting rights does not work
Ron Johnson wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 04/06/08 18:30, Anton Pussep wrote: Ron Johnson wrote: On 04/06/08 16:31, Anton Pussep wrote: Ron Johnson wrote: On 04/06/08 13:43, Anton Pussep wrote: I experience difficulties to access my PTP camera as non-root. The camera is a Canon A580, that supports PTP via USB very well. I can access the camera as root, but not as a local user. Using the gphoto manual (http://www.gphoto.org/doc/manual/permissions-usb.html) I tried to make hotplug and HAL set permissions, but it did not work. For hotplug I created a usbcam.usermap and a usbcam script, but the script does not get executed. After that I tried HAL, but it seems like there is no policy file for gphoto. I don't know how to proceed in this problem, may be someone else has an idea? Who should be responsible for setting rights in general, hotplug or HAL? Why isn't there a policy file for gphoto, when there is an information file? Add yourself to the camera and plugdev groups. There is no group camera in my system. I added myself to the group plugdev, however, but it did not help. Then you need to create it. BTW, what branch are you running? I did, but it didn't help. I still couldn't find any file that refers to the camera group. I am running Debian lenny (testing), last upgraded on 6th of April 2008. My main question is where are the permissions set? They are not hardcoded or set magically I guess, there must be a script that is responsible for doing so. By udev. Okay, there is a file /etc/udev/libgphoto2.rules, it only mentions the plugdev group. But even though my user is in that group (and also camera), it still does not work. Here's a thought: did you log all the way out after adding yourself to that group? So which devices group is supposed to be set to plugdev or camera, anyway? dmesg output says: usb 2-10: new high speed USB device using ehci_hcd and address 4 usb 2-10: configuration #1 chosen from 1 choice But this doesn't really help. Does it or /var/log/syslog indicate anything else? I am having similar problems with a Nikon Coolpix L11 that I just bought. I had not even tried, however, to run gtkam as root until I read Anton's post. I checked the gphoto site and it said that the camera was supported, so I went and bought it. I can access it as a Mass Storage device, but if I set it to PTP and try to use gtkam, it does not work. I have since determined that support for the L11 was only recently added, so is not in the version in Etch. The camera should be recognized as a generic PTP camera, however. If I run gtkam as a normal user and tell it to detect the camera then it says it found a PTP camera, but it will not initialize the camera. If I start gtkam as root then it detects the camera just the same, but it DOES initialize the camera and I can view, save and delete images. I, also, would like to be able to run gtkam as a normal user and not as root. I have added myself to the plugdev group (camera does not exist here, either, as on Anton's box) and I have completely logged out and back in, but the results are the same. Can anyone help Anton and me? -- Marc Shapiro [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PTP camera, setting rights does not work
Ron Johnson wrote: On 04/06/08 18:30, Anton Pussep wrote: Ron Johnson wrote: On 04/06/08 16:31, Anton Pussep wrote: Ron Johnson wrote: On 04/06/08 13:43, Anton Pussep wrote: I experience difficulties to access my PTP camera as non-root. The camera is a Canon A580, that supports PTP via USB very well. I can access the camera as root, but not as a local user. Using the gphoto manual (http://www.gphoto.org/doc/manual/permissions-usb.html) I tried to make hotplug and HAL set permissions, but it did not work. For hotplug I created a usbcam.usermap and a usbcam script, but the script does not get executed. After that I tried HAL, but it seems like there is no policy file for gphoto. I don't know how to proceed in this problem, may be someone else has an idea? Who should be responsible for setting rights in general, hotplug or HAL? Why isn't there a policy file for gphoto, when there is an information file? Add yourself to the camera and plugdev groups. There is no group camera in my system. I added myself to the group plugdev, however, but it did not help. Then you need to create it. BTW, what branch are you running? I did, but it didn't help. I still couldn't find any file that refers to the camera group. I am running Debian lenny (testing), last upgraded on 6th of April 2008. My main question is where are the permissions set? They are not hardcoded or set magically I guess, there must be a script that is responsible for doing so. By udev. Okay, there is a file /etc/udev/libgphoto2.rules, it only mentions the plugdev group. But even though my user is in that group (and also camera), it still does not work. Here's a thought: did you log all the way out after adding yourself to that group? Yes, I even tried a reboot. So which devices group is supposed to be set to plugdev or camera, anyway? dmesg output says: usb 2-10: new high speed USB device using ehci_hcd and address 4 usb 2-10: configuration #1 chosen from 1 choice But this doesn't really help. Does it or /var/log/syslog indicate anything else? /var/log/syslog contains the same message as the dmesg-output. Now what I would like to know is if the /etc/udev/libgphoto2.rules gets executed at all and for which device it sets the permissions, any ideas how to get there? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: IBM DB2 V9.5 32 bits failed to allocate share memory
Debian and redhat sets on kernel config are slightly different. But with the same config (just config from redhat) on a debian custom kernel, nothing change. so ... It's definitivly not a debian issue. Thanks for support Chris Bannister a écrit : On Thu, Apr 03, 2008 at 11:54:53AM +0200, cypherstrong wrote: Ok After well testing on both system ... I have found that DB2 V9.5 FixPack 0 doesn't work on 32 bits system properly Redhat sets automatically some sysctl value after installation: kernel.shmmax So that's why db2 don't crash I have do the same tuning on debian, and now installation work but ... performance is awfull !!! Even system doesn't say that they is some issues in memory, it seems db2 has a problem on 32bits system... So I have try v8.2 version, and speed is wonderfull with same tuneage of memory I do this : kernel.sem = 256 256000 100 1024 kernel.shmmax=256M (in octet so) kernel.shmall=3.7G So speed is excellent with older version of db2 but not this version, even in redhat or debian I have post on db2 my issue, but it seems that nobody use this version yet on net ... I can't download v9.1fixpack4 anymore on db2 (link is really well hide on they site) So I'm stuck for this system We will need to move to a 64 bits system to solve the problem a fixpack 1 should be good now thanks for support No problem. Seems like its not a Debian problem then. But I would check the kernel configs for differences. signature.asc Description: OpenPGP digital signature
Re: PTP camera, setting rights does not work
Marc Shapiro wrote: Ron Johnson wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 04/06/08 18:30, Anton Pussep wrote: Ron Johnson wrote: On 04/06/08 16:31, Anton Pussep wrote: Ron Johnson wrote: On 04/06/08 13:43, Anton Pussep wrote: I experience difficulties to access my PTP camera as non-root. The camera is a Canon A580, that supports PTP via USB very well. I can access the camera as root, but not as a local user. Using the gphoto manual (http://www.gphoto.org/doc/manual/permissions-usb.html) I tried to make hotplug and HAL set permissions, but it did not work. For hotplug I created a usbcam.usermap and a usbcam script, but the script does not get executed. After that I tried HAL, but it seems like there is no policy file for gphoto. I don't know how to proceed in this problem, may be someone else has an idea? Who should be responsible for setting rights in general, hotplug or HAL? Why isn't there a policy file for gphoto, when there is an information file? Add yourself to the camera and plugdev groups. There is no group camera in my system. I added myself to the group plugdev, however, but it did not help. Then you need to create it. BTW, what branch are you running? I did, but it didn't help. I still couldn't find any file that refers to the camera group. I am running Debian lenny (testing), last upgraded on 6th of April 2008. My main question is where are the permissions set? They are not hardcoded or set magically I guess, there must be a script that is responsible for doing so. By udev. Okay, there is a file /etc/udev/libgphoto2.rules, it only mentions the plugdev group. But even though my user is in that group (and also camera), it still does not work. Here's a thought: did you log all the way out after adding yourself to that group? So which devices group is supposed to be set to plugdev or camera, anyway? dmesg output says: usb 2-10: new high speed USB device using ehci_hcd and address 4 usb 2-10: configuration #1 chosen from 1 choice But this doesn't really help. Does it or /var/log/syslog indicate anything else? I am having similar problems with a Nikon Coolpix L11 that I just bought. I had not even tried, however, to run gtkam as root until I read Anton's post. I checked the gphoto site and it said that the camera was supported, so I went and bought it. I can access it as a Mass Storage device, but if I set it to PTP and try to use gtkam, it does not work. I have since determined that support for the L11 was only recently added, so is not in the version in Etch. The camera should be recognized as a generic PTP camera, however. If I run gtkam as a normal user and tell it to detect the camera then it says it found a PTP camera, but it will not initialize the camera. If I start gtkam as root then it detects the camera just the same, but it DOES initialize the camera and I can view, save and delete images. I, also, would like to be able to run gtkam as a normal user and not as root. I have added myself to the plugdev group (camera does not exist here, either, as on Anton's box) and I have completely logged out and back in, but the results are the same. Can anyone help Anton and me? This is interesting, my camera is not recognised at all when I'm logged in as non-root. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: sun-java6 dependencies
Am Sonntag, 6. April 2008 schrieb Benjamí Villoslada: Hi, Someone with sun-java6 packages dependencies problems too? Installed i my Debian Sid: sun-java6-bin 6-04-2 sun-java6-jre 6-04-2 sun-java6-plugin 6-04-2 In order to install this I've added this repository: deb http://snapshot.debian.net/archive pool sun-java6 And every dist-upgrade I receive this error: - The following packages are BROKEN: sun-java6-bin sun-java6-jre 1 packages upgraded, 0 newly installed, 0 to remove and 1 not upgraded. Need to get 6456kB of archives. After unpacking 0B will be used. The following packages have unmet dependencies: sun-java6-bin: Depends: sun-java6-jre (= 6-04-2) but 6-05-1 is to be installed. sun-java6-jre: Depends: sun-java6-bin (= 6-05-1) but 6-04-2 is installed. or ia32-sun-java6-bin (= 6-05-1) which is a virtual package. - In other hand: sun-java6 installation doesn't update symlinks in /etc/alternatives, that still points to the anterior sun-java5 files. Seems that is one bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=474190 TIA Regards, It should come soon. sun-java6-bin has been available for amd64 but not for i386. Maybe it was just a package maintainers mistake... Mit freundlichem Gruß Tim Rühsen -- OMS Open Media System GmbH Holzdamm 40 20099 Hamburg Fon +49-40-238878-0 Fax +49-40-238878-99 Email [EMAIL PROTECTED] Sitz und Registergericht Hamburg HRB 57616
Re: searching pdf files from a specific page onwards
On 04/06/2008 08:28 PM, Kamaraju S Kusumanchi wrote: I currently use kpdf for viewing pdf files. I have tried other pdf viewers (acroread, xpdf etc.,) some time back and settled on to kpdf as it sucked less. Is there any pdf viewer out there which has the following feature? Say I have a document of 400 pages. Now I search for a word and say there is a hit in pg 250. Now if I search for another word, kpdf starts searching from pg 250 onwards. However, I would like the new search to start from pg 100 (or worst case scenario - from pg 1 onwards). This is all the more painful because kpdf does not have a backward search feature. Is there a pdf viewer which can do this? What pdf viewer do you think is better in terms of available search features? thanks raju Evince has an option to search backwards. Anyway, in kpdf 0.5.5, I'm able to scroll back to the first page using the thumbnails sidebar, and then new searches started with Control-F seem to start from the first page. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: error while loading shared libraries: libstdc++.so.5
On 04/06/2008 08:45 PM, Haines Brown wrote: This a common error message, but a search on line didn't resolve it. I'm running debian etch. I installed an application, gmfsk, deb, which went fine. But when I go to run it, I get, as either root or user: gmfsk: error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory The application uses libstdc++6 = 4.1.0, but the error suggests it is turning instead to libstdc++.so.5. The libg++2.8.1.3-glibc2.2 is not installed. Where did you get that copy of gmfsk from? Please enter this command and show us its output: ldd /usr/bin/gmfsk Also, please show us the output of this command: ls -l /usr/lib/libstdc* -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Remove package from apt's db
On Mon, Apr 07, 2008 at 04:46:45PM +1000, Rich Healey wrote: I _DO_ know what i'm doing (not arrogance or anger). I'm used to building systems from scratch, sorry, I was referring to a good knowledge of dpkg files, not to a good knowledge about complilation of packages. I any case my previous answer (complemented by dpkg documentation) contains all you need to know for your aims. -- Chi usa software non libero avvelena anche te. Digli di smettere. Informatica=arsenico: minime dosi in rari casi patologici, altrimenti letale. Informatica=bomba: intelligente solo per gli stupidi che ci credono. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Search for 3D GPL CAD (that can read/export soloid works files)
Hello,.. I would like to work with some GPL/BSD CAD system that could read solid works files. for know i used BRL-CAD but it dosn't give me what i need (the abuilty to scatch 3D and work with SolidWorks files). Be glad to get directions.
Re: Search for 3D GPL CAD (that can read/export soloid works files)
On Monday 07 April 2008 10:27:39 Jabka Atu wrote: Hello,.. I would like to work with some GPL/BSD CAD system that could read solid works files. for know i used BRL-CAD but it dosn't give me what i need (the abuilty to scatch 3D and work with SolidWorks files). Be glad to get directions. Google gives for: linux cad : http://www.tech-edv.co.at/lunix/CADlinks.html Thierry -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Did the syntax for a samba /etc/fstab entry change?
On 04/05/2008 10:50 AM, Bob Cox wrote: [snip] //gaia/fileserver on /mnt/fileserver type cifs (rw,mand) It is worth mentioning that there is an entry in /etc/hosts for gaia. I recall reading that cifs needs an IP address but an entry in your /etc/hosts will work. -- Glen -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Search for 3D GPL CAD (that can read/export soloid works files)
Thank you for the quick responce but ... Thierry Chatelet wrote: On Monday 07 April 2008 10:27:39 Jabka Atu wrote: Hello,.. I would like to work with some GPL/BSD CAD system that could read solid works files. for know i used BRL-CAD but it dosn't give me what i need (the abuilty to scatch 3D and work with SolidWorks files). Be glad to get directions. Google gives for: linux cad : http://www.tech-edv.co.at/lunix/CADlinks.html I need a 3D scketching program that can work with SolidWorks (not simple CAD). Also i would be glad to find free one (GPL/BSD etc ...) Thierry -- -- Could you at least use man ? Jabka Atu (aka mha13/Mashrom Head) || bsh83.blogspot.com -- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: error while loading shared libraries: libstdc++.so.5
Mumia W.. [EMAIL PROTECTED] writes: On 04/06/2008 08:45 PM, Haines Brown wrote: This a common error message, but a search on line didn't resolve it. I'm running debian etch. I installed an application, gmfsk, deb, which went fine. But when I go to run it, I get, as either root or user: gmfsk: error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory The application uses libstdc++6 = 4.1.0, but the error suggests it is turning instead to libstdc++.so.5. The libg++2.8.1.3-glibc2.2 is not installed. Where did you get that copy of gmfsk from? A couple years ago I had to compile it from source, but I now see that it is a deb package. The package is what I installed. The package description said it depended on libstdc++.so.6. However, to get it started I had to install libstdc++.so.5. Please enter this command and show us its output: ldd /usr/bin/gmfsk $ ldd /usr/bin/gmfsk | grep libstdc libstdc++.so.6 = /usr/lib/libstdc++.so.6 (0xb738e000) So, since I had libstsdc++.so.6 installed, and this is what it needs, why would installation of libstdc++.so.5 enabled it to work? Also, please show us the output of this command: ls -l /usr/lib/libstdc* Yep, both now installed: $ ls -l /usr/lib/libstdc* lrwxrwxrwx 1 root root 18 2008-04-07 06:14 /usr/lib/libstdc++.so.5 - libstdc++.so.5.0.7 -rw-r--r-- 1 root root 737624 2007-01-03 13:47 /usr/lib/libstdc++.so.5.0.7 lrwxrwxrwx 1 root root 18 2007-04-22 09:40 /usr/lib/libstdc++.so.6 - libstdc++.so.6.0.8 -rw-r--r-- 1 root root 909044 2006-12-10 09:45 /usr/lib/libstdc++.so.6.0.8 The logic of the situation seems almost as if gmfsk needed _both_ versions of the libstdc++ library. -- Haines Brown, KB1GRM -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: face headers on mail to the list
Ron Johnson [EMAIL PROTECTED] wrote: It's a 48x48 bw bitmap, designed in the 1980s (so it can't be that huge or resource-piggish) at Bell Labs. No, it's not: http://quimby.gnus.org/circus/face/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
exim4 changed
Does anyone know what format change was done to /etc/exim4/exim4.conf.localmacros? In order to use verizon.net we needed something like: 'AUTH_CLIENT_ALLOW_NOTLS_PASSWORD = true' in the file in the past. Now the only way that gets past update-exim4.conf is by stripping the apostrophes and that generates a /var/lib/exim4/paniclog when /etc/init.d/exim4 restart gets run. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: error while loading shared libraries: libstdc++.so.5
Kamaraju S Kusumanchi [EMAIL PROTECTED] writes: The application uses libstdc++6 = 4.1.0, but the error suggests it is turning instead to libstdc++.so.5. What is the application you are talking about? How are you sure it uses only libstdc++6? Is libstdc++6 installed on your machine? Thanks, raju, that was the answer. I inferred from the package description that it dependend on libstdc++6 and so assumed, incorrectly as it turned out, that it didn't need libstdc++5. I installed the libstdc++5 and all's well. -- Haines Brown, KB1GRM -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: face headers on mail to the list
On Sun, 6 Apr 2008 18:11:04 -0700 Andrew Sackville-West [EMAIL PROTECTED] wrote: Hello Andrew, seriously, though, it's silly vanity. That said, if you can get a reasonable likeness of your face in 4 80 column lines, then why not? I'm one of the guilty when it comes to face (and x-face, come to that) headers. Although you won't find likeness of me there. -- Regards _ / ) The blindingly obvious is / _)radnever immediately apparent What will you do when the gas taps turn? The Gasman Cometh - Crass signature.asc Description: PGP signature
Re: face headers on mail to the list
On Sun, 06 Apr 2008 21:11:52 -0500 Ron Johnson [EMAIL PROTECTED] wrote: Hello Ron, It's a 48x48 bw bitmap, designed in the 1980s (so it can't be that huge or resource-piggish) at Bell Labs. That's X-Face. Face can be colour. -- Regards _ / ) The blindingly obvious is / _)radnever immediately apparent Is she really going out with him? New Rose - The Damned signature.asc Description: PGP signature
Re: sun-java6 dependencies
El Dilluns 07 Abril 2008, Tim Rühsen va escriure: It should come soon. sun-java6-bin has been available for amd64 but not for i386. Maybe it was just a package maintainers mistake... Thanks for the feedback Frank and Tim. Is not a local problem of my box :) Java5 have a problem too: sun-java5-plugin needs one package + version (that I can't remember now) not available in Sid at this moment. -- Benjamí http://blog.bitassa.cat .
Re: error while loading shared libraries: libstdc++.so.5
ldd /usr/bin/gmfsk $ ldd /usr/bin/gmfsk | grep libstdc libstdc++.so.6 = /usr/lib/libstdc++.so.6 (0xb738e000) So, since I had libstsdc++.so.6 installed, and this is what it needs, why would installation of libstdc++.so.5 enabled it to work? If it were to happen to me, I'd assume it was because I didn't look properly when I tried it without libcstc++.so.5 (and I'd try removing the libstdc++5 version to verify). But I won't assume you're as stupid as me, so maybe gmfsk executes another binary that depends on libstdc++.so.5. To try that, uninstall libstdc++.so.5, and run strace -f gmfsk 2 stderr-file.txt then search the stderr-file.txt for libstdc. If there is something opening libstdc++.so.5, you should see the exec() line somewhere above. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [Somewhat More OT] Closed source software Was [Re: Hmmm. A question. Was [Re: Debian is losing its users]]
On Sun, Apr 06, 2008 at 07:45:59PM -0700, Andrew Sackville-West wrote: I remember upgrading my C-64's 300 baud modem to a 1200baud one. That was so cool. No more typing faster than the modem... I used to chat with my friends using terminal programs we'd written ourselves complete with xmodem protocol all written in c-64 basic. (I even had a rudimentary scripting language built-in to mine to allow scripting the handshake/login procedures at various bulletin boards. ) I don't know why we didn't just call each other. It would have been so much easier... geeks. I made a spark-gap transmitter to send morse code to my friend's AM radio three blocks away. Of course, I was sending to everyone within 6 blocks, and the antenna reached half-way there anyway through the tops of the oak trees. Honest dad, I don't know how that wire ended up there... I still remember the magic a few years ago (I know it wasn't magic, but hey) when I was in a motel in Owen Sound Ontario for the winter and couldn't get a decent weather report. I hooked my portable SW receiver to the laptop, installed hamfax (off the set of Woody CDs), and pulled off the weather map from the Sackville Nova Scotia Coast Guard Radio. Not bad considering I had just the built-in antenna and the Coast Guard was transmitting to the Atlantic Ocean, not the Great Lakes. That was the same P-II laptop that I was reading in a tent when the tent got hit (or just missed) by lightening. Thank heavens for metal poles. The display is fried and now the battery and hard drive are dead so I am laptopless. Doug. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: searching pdf files from a specific page onwards
On Sun, Apr 06, 2008 at 10:54:19PM -0400, Kamaraju S Kusumanchi wrote: Douglas A. Tutty wrote: Sorry, I'm at my VT520 now so can't try it, but I think in the menu's there's a search dialog with check boxes as opposed to just the search bar in thumbnails. If so, you can add that to the toolbar. What version of kpdf are you running? I am running kpdf 0.5.5 that comes in Etch. Options such as find backwards etc., are greyed out for me. Worst case, you can go back to page one (there's a button to do this) and run search then. I think that by default, it starts the search from the currently displayed page. This is what I am currently doing. But it is a bit time consuming. I'm running standard Etch amd64. As for going to page one being time-consuming, I suppose it depends on the machine. It is terribly slow on my P-II with 64 MB, but blink-of-an-eye on my Athlon64. Doug. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [VERY OT while waiting for Lenny?] reminiscing on old computers
On Sun, Apr 06, 2008 at 09:26:41PM -0500, Ron Johnson wrote: On 04/06/08 20:48, Douglas A. Tutty wrote: On Sun, Apr 06, 2008 at 06:18:51PM -0700, Andrew Sackville-West wrote: On Sun, Apr 06, 2008 at 08:23:20PM -0400, Douglas A. Tutty wrote: I remember my 386. It was an IBM PS/2 model 70-A21. It came with the then-unherd of 120MB hard drive, MCA bus, and I put 4 MB ram into it, running OS/2, IBM Fortran compiler (the reason I bought a computer in the first place), WordPerfect 4.?, and AutoCad 11. Warp 3 was a wonderful OS. Presentation Manager was *really* slick, and formatting floppies while downloading a file at 14.4KBps was something that Win 3.1 could only dream of, and Win93 could only barely accomplish when the moon was full and the stars in proper alignment. I never had Warp 3. I started with version 1.1 on the 386 and kept up with the service packs. I convinced IBM to give me 2.? when I had to get the 486. BTW, those IBM floppies from ~1990 still work. OS/2 was my first OS. I had to learn Dos and Lotus-1-2-3 for school (on their computer), but did everything at home on both computers on OS/2. The 486 came with win 3.1. I only used it for a game that needed it (Harpoon!) while the DOS games ran OK under OS/2 (but better under dos). Once I had a Zip drive, I just installed Win onto the Zip drive (it didn't know it could do it) and booted dos with a floppy. It was certainly a bit of a switch to go from OS/2 to Potato (via a short stint with RH 4-something). DOS-based BBSs still mandated you have one PC per modem, but OS/2 was capable enough to run 6 or 8 modems at full speed. I only had a 2400 modem but eventually move up to a 28.8. Doug. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [VERY OT while waiting for Lenny?] reminiscing on old computers
On Sun, Apr 06, 2008 at 09:46:15PM -0700, Amit Uttamchandani wrote: Since we're off topic and talking about low end machine. I don't know if any of you guys have heard of this new linux distro on the block called slitaz. http://www.slitaz.org/en/ Very small distro...fits in a 24.8 mb live cd. Can run entirely on RAM as low as 64MB. Linux kernel 2.6.24.2 and all the good stuff. I wish i could try it out but I only have old PPC machines lying around...never owned an x86... Personally, I wouldn't bother. You can only do so much with Linux on a low-end machine. OpenBSD (and to be fair NetBSD) run so much better, and there are scripts out to make a liveCD for OpenBSD. My only gripe with NetBSD is comparing how long security fixes take to come out (if they ever do): Debian and FreeBSD tend to come out within a day of each other. OpenBSD, if its vulnerable at all, given the changes they made to the compiler, takes about a week (but there are never new bugs created by a fix), and NetBSD may take a month or more. Doug. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [VERY OT while waiting for Lenny?] reminiscing on old computers
On Sun, Apr 06, 2008 at 07:17:49PM -0700, Andrew Sackville-West wrote: On Sun, Apr 06, 2008 at 09:48:18PM -0400, Douglas A. Tutty wrote: On Sun, Apr 06, 2008 at 06:18:51PM -0700, Andrew Sackville-West wrote: On Sun, Apr 06, 2008 at 08:23:20PM -0400, Douglas A. Tutty wrote: We could reminise about my 486 that doesn't run Debian anymore. I wonder if Lenny will run on my P-II or if that's another box for OpenBSD. hmmm... good question. It doesn't seem to me like there's been as much change between etch and lenny, relative to the sarge-etch transition. Of course, being all sid for my human-facing machines, I haven't used an etch-like system in a while now... The big problem was the memory requirements with bash hitting swap on the 486 in Etch but not Sarge. I wonder how much memory Lenny's installer will need; the P-II only has 64 MB. my household server here (bigmomma, .5TB) started out on an old pentium 90 system with the cpu on a daughter board. over time, that slot wore out (don't ask me how, because I don't know). At the end, I had to keep a rubberband pulling that daughter board at just the right angle, or the thing would lock up and not boot. Worked like that for years. Aren't you the one that said using a VT520 to access a P-II to ssh into an Athlon64 to read mail was rube-goldberg? Thanks Mr. Pot. Kettle. :) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Using colours in mutt (was Re: Disk Drive Order Changes - Again)
On Sun, Apr 06, 2008 at 07:20:53PM -0700, Andrew Sackville-West wrote: On Sun, Apr 06, 2008 at 09:50:24PM -0400, Douglas A. Tutty wrote: On Sun, Apr 06, 2008 at 06:37:14PM -0700, Andrew Sackville-West wrote: On Sun, Apr 06, 2008 at 01:54:24PM -0400, Douglas A. Tutty wrote: Still doesn't help on my white-on-black VT520. A bit of white-space (well, actually black-space) does help. you can use mono inplace of color and select underline, bold, etc... man muttrc (just learned that myself). Yeah, I still haven't finished tweaking my .bashrc (or is it .bash_profile) to get things tweaked based on TERM, since the VT is connected to a P-II from whense I ssh into the AMD to run mutt. coughRubecough-coughGoldbergcough-cough-cough What, the Athlon doesn't have a spare serial port or a paralell port. I need a backup box anyway, so it acts as a print server when I need to print, and a terminal server when I need to access stuff from upstairs. Saves me buying a USB/paralell and a USB/serial adapter. The Athlon's one serial port is used to connect to my 3Com (USR) Courier V.Everything external modem. The P-II is also located in the basement (since it makes a lot of noise) while the VT520 is upstairs. Unix terminal handling grew up where an individual user would have one type of terminal, it doesn't have inherent abilities to adjust features (e.g. colours) based on TERM. The only exceptions seem to be Lynx, Vim, and partially mc (e.g. learn-keys gets save with TERM type). Doug. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: IMPORTANT BUSINESS TRANSACTION FOR YOU PLEASE READ AND REPLY!!!!!!
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Douglas A. Tutty wrote on 2008-04-07 02:40: Of course, Quoting the spam when you complain about spam just confuses the spam filter so that it will think such mail is legitimate. I understand the issue about not wanting to limit posters to the list of subscribers. However, perhaps there should be a whitelist or somthing to which non-subscribers can post with the same handshaking as the subscription protocol? There is: http://lists.debian.org/whitelist/ Do legitmate people actually post if they don't have an email address? I can easily imagine a scenario, where I am somewhere on a half-configured box or in an internet cafe etc. where I don't have access to my regular mail, but where I would like to ask a question and read the answer on the web pages. Johannes -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) iD8DBQFH+hQxC1NzPRl9qEURAtlWAJ0SDhONNvbjaynayMHKj1/PybRMTQCeKD/v d9R6a3lKDCSC1itDakZ9QsA= =AF1U -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: IMPORTANT BUSINESS TRANSACTION FOR YOU PLEASE READ AND REPLY!!!!!!
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Johannes Wiedersich wrote on 2008-04-07 14:31: I understand the issue about not wanting to limit posters to the list of subscribers. However, perhaps there should be a whitelist or somthing to which non-subscribers can post with the same handshaking as the subscription protocol? There is: http://lists.debian.org/whitelist/ Sorry, I misunderstood you, Doug. IIUC, you propose that there is a special way for non-subscribers to post, that locks out spammers at the same time? How should that work? The only thing I could imagine, is one of those silly 'type the letters that you find in this image' stuff. That simply drives spammers to OCR or other tricks and locks out others (blind, color blind etc.), and adds an additional layer of annoyance to the rest of us. [I get angry against spammers, but I would rather rely on my spam filter and ignore the odd spam that gets through than to make it more difficult for people to post. ] Just MHO. Cheers, Johannes -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) iD8DBQFH+hcMC1NzPRl9qEURAoBmAJ4sWBarDo5LYkcitJJpyKf/PdcElgCfZ81t HsCTfAIIOz79AiQn9WC5lP4= =9KvU -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [OT] Need old Packages.gz and Release Files
On Fri, Apr 04, 2008 at 12:44:38PM -0400, Lennart Sorensen wrote: Neat project. I am not sure why being able to install 3.0r3 rather than 3.0r6 is necesarily very useful, but it is neat to have the choice. To have reproducibility of installations, where such is necessary (e.g., software escrow situations). -- Lo-lan-do Home is where you have to wash the dishes. -- #debian-devel, Freenode, 2004-09-22 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
